how do you write a conclusion for a lab report

Are you seeking one-on-one college counseling and/or essay support? Limited spots are now available. Click here to learn more.

How to Write a Lab Report – with Example/Template

April 11, 2024

Perhaps you’re in the midst of your challenging AP chemistry class in high school, or perhaps college you’re enrolled in biology , chemistry , or physics at university. At some point, you will likely be asked to write a lab report. Sometimes, your teacher or professor will give you specific instructions for how to format and write your lab report, and if so, use that. In case you’re left to your own devices, here are some guidelines you might find useful. Continue reading for the main elements of a lab report, followed by a detailed description of the more writing-heavy parts (with a lab report example/lab report template). Lastly, we’ve included an outline that can help get you started.

What is a lab report?

A lab report is an overview of your experiment. Essentially, it explains what you did in the experiment and how it went. Most lab reports end up being 5-10 pages long (graphs or other images included), though the length depends on the experiment. Here are some brief explanations of the essential parts of a lab report:

Title : The title says, in the most straightforward way possible, what you did in the experiment. Often, the title looks something like, “Effects of ____ on _____.” Sometimes, a lab report also requires a title page, which includes your name (and the names of any lab partners), your instructor’s name, and the date of the experiment.

Abstract : This is a short description of key findings of the experiment so that a potential reader could get an idea of the experiment before even beginning.

Introduction : This is comprised of one or several paragraphs summarizing the purpose of the lab. The introduction usually includes the hypothesis, as well as some background information.

Lab Report Example (Continued)

Materials : Perhaps the simplest part of your lab report, this is where you list everything needed for the completion of your experiment.

Methods : This is where you describe your experimental procedure. The section provides necessary information for someone who would want to replicate your study. In paragraph form, write out your methods in chronological order, though avoid excessive detail.

Data : Here, you should document what happened in the experiment, step-by-step. This section often includes graphs and tables with data, as well as descriptions of patterns and trends. You do not need to interpret all of the data in this section, but you can describe trends or patterns, and state which findings are interesting and/or significant.

Discussion of results : This is the overview of your findings from the experiment, with an explanation of how they pertain to your hypothesis, as well as any anomalies or errors.

Conclusion : Your conclusion will sum up the results of your experiment, as well as their significance. Sometimes, conclusions also suggest future studies.

Sources : Often in APA style , you should list all texts that helped you with your experiment. Make sure to include course readings, outside sources, and other experiments that you may have used to design your own.

How to write the abstract

The abstract is the experiment stated “in a nutshell”: the procedure, results, and a few key words. The purpose of the academic abstract is to help a potential reader get an idea of the experiment so they can decide whether to read the full paper. So, make sure your abstract is as clear and direct as possible, and under 200 words (though word count varies).

When writing an abstract for a scientific lab report, we recommend covering the following points:

• Background : Why was this experiment conducted?
• Objectives : What problem is being addressed by this experiment?
• Methods : How was the study designed and conducted?
• Results : What results were found and what do they mean?
• Conclusion : Were the results expected? Is this problem better understood now than before? If so, how?

How to write the introduction

The introduction is another summary, of sorts, so it could be easy to confuse the introduction with the abstract. While the abstract tends to be around 200 words summarizing the entire study, the introduction can be longer if necessary, covering background information on the study, what you aim to accomplish, and your hypothesis. Unlike the abstract (or the conclusion), the introduction does not need to state the results of the experiment.

Here is a possible order with which you can organize your lab report introduction:

• Intro of the intro : Plainly state what your study is doing.
• Background : Provide a brief overview of the topic being studied. This could include key terms and definitions. This should not be an extensive literature review, but rather, a window into the most relevant topics a reader would need to understand in order to understand your research.
• Importance : Now, what are the gaps in existing research? Given the background you just provided, what questions do you still have that led you to conduct this experiment? Are you clarifying conflicting results? Are you undertaking a new area of research altogether?
• Prediction: The plants placed by the window will grow faster than plants placed in the dark corner.
• Hypothesis: Basil plants placed in direct sunlight for 2 hours per day grow at a higher rate than basil plants placed in direct sunlight for 30 minutes per day.
• How you test your hypothesis : This is an opportunity to briefly state how you go about your experiment, but this is not the time to get into specific details about your methods (save this for your results section). Keep this part down to one sentence, and voila! You have your introduction.

How to write a discussion section

Here, we’re skipping ahead to the next writing-heavy section, which will directly follow the numeric data of your experiment. The discussion includes any calculations and interpretations based on this data. In other words, it says, “Now that we have the data, why should we care?”  This section asks, how does this data sit in relation to the hypothesis? Does it prove your hypothesis or disprove it? The discussion is also a good place to mention any mistakes that were made during the experiment, and ways you would improve the experiment if you were to repeat it. Like the other written sections, it should be as concise as possible.

Here is a list of points to cover in your lab report discussion:

• Weaker statement: These findings prove that basil plants grow more quickly in the sunlight.
• Stronger statement: These findings support the hypothesis that basil plants placed in direct sunlight grow at a higher rate than basil plants given less direct sunlight.
• Factors influencing results : This is also an opportunity to mention any anomalies, errors, or inconsistencies in your data. Perhaps when you tested the first round of basil plants, the days were sunnier than the others. Perhaps one of the basil pots broke mid-experiment so it needed to be replanted, which affected your results. If you were to repeat the study, how would you change it so that the results were more consistent?
• Implications : How do your results contribute to existing research? Here, refer back to the gaps in research that you mentioned in your introduction. Do these results fill these gaps as you hoped?
• Questions for future research : Based on this, how might your results contribute to future research? What are the next steps, or the next experiments on this topic? Make sure this does not become too broad—keep it to the scope of this project.

How to write a lab report conclusion

This is your opportunity to briefly remind the reader of your findings and finish strong. Your conclusion should be especially concise (avoid going into detail on findings or introducing new information).

Here are elements to include as you write your conclusion, in about 1-2 sentences each:

• Restate your goals : What was the main question of your experiment? Refer back to your introduction—similar language is okay.
• Restate your methods : In a sentence or so, how did you go about your experiment?
• Key findings : Briefly summarize your main results, but avoid going into detail.
• Limitations : What about your experiment was less-than-ideal, and how could you improve upon the experiment in future studies?
• Significance and future research : Why is your research important? What are the logical next-steps for studying this topic?

Template for beginning your lab report

Here is a compiled outline from the bullet points in these sections above, with some examples based on the (overly-simplistic) basil growth experiment. Hopefully this will be useful as you begin your lab report.

1) Title (ex: Effects of Sunlight on Basil Plant Growth )

2) Abstract (approx. 200 words)

• Background ( This experiment looks at… )
• Objectives ( It aims to contribute to research on…)
• Methods ( It does so through a process of…. )
• Results (Findings supported the hypothesis that… )
• Conclusion (These results contribute to a wider understanding about…)

3) Introduction (approx. 1-2 paragraphs)

• Intro ( This experiment looks at… )
• Background ( Past studies on basil plant growth and sunlight have found…)
• Importance ( This experiment will contribute to these past studies by…)
• Hypothesis ( Basil plants placed in direct sunlight for 2 hours per day grow at a higher rate than basil plants placed in direct sunlight for 30 minutes per day.)
• How you will test your hypothesis ( This hypothesis will be tested by a process of…)

4) Materials (list form) (ex: pots, soil, seeds, tables/stands, water, light source )

5) Methods (approx. 1-2 paragraphs) (ex: 10 basil plants were measured throughout a span of…)

6) Data (brief description and figures) (ex: These charts demonstrate a pattern that the basil plants placed in direct sunlight…)

7) Discussion (approx. 2-3 paragraphs)

• Support or reject hypothesis ( These findings support the hypothesis that basil plants placed in direct sunlight grow at a higher rate than basil plants given less direct sunlight.)
• Factors that influenced your results ( Outside factors that could have altered the results include…)
• Implications ( These results contribute to current research on basil plant growth and sunlight because…)
• Questions for further research ( Next steps for this research could include…)
• Restate your goals ( In summary, the goal of this experiment was to measure…)
• Restate your methods ( This hypothesis was tested by…)
• Key findings ( The findings supported the hypothesis because…)
• Limitations ( Although, certain elements were overlooked, including…)
• Significance and future research ( This experiment presents possibilities of future research contributions, such as…)
• Sources (approx. 1 page, usually in APA style)

Final thoughts – Lab Report Example

Hopefully, these descriptions have helped as you write your next lab report. Remember that different instructors may have different preferences for structure and format, so make sure to double-check when you receive your assignment. All in all, make sure to keep your scientific lab report concise, focused, honest, and organized. Good luck!

For more reading on coursework success, check out the following articles:

• How to Write the AP Lang Argument Essay (With Example)
• How to Write the AP Lang Rhetorical Analysis Essay (With Example)
• 49 Most Interesting Biology Research Topics
• 50 Best Environmental Science Research Topics
• High School Success

Sarah Mininsohn

With a BA from Wesleyan University and an MFA from the University of Illinois at Urbana-Champaign, Sarah is a writer, educator, and artist. She served as a graduate instructor at the University of Illinois, a tutor at St Peter’s School in Philadelphia, and an academic writing tutor and thesis mentor at Wesleyan’s Writing Workshop.

• 2-Year Colleges
• Application Strategies
• Best Colleges by Major
• Best Colleges by State
• Big Picture
• Career & Personality Assessment
• College Essay
• College Search/Knowledge
• College Success
• Costs & Financial Aid
• Data Visualizations
• Dental School Admissions
• Extracurricular Activities
• Graduate School Admissions
• High Schools
• Law School Admissions
• Medical School Admissions
• Navigating the Admissions Process
• Online Learning
• Private High School Spotlight
• Summer Program Spotlight
• Summer Programs
• Teacher Tools
• Test Prep Provider Spotlight

“Innovative and invaluable…use this book as your college lifeline.”

— Lynn O'Shaughnessy

Nationally Recognized College Expert

College Planning in Your Inbox

Join our information-packed monthly newsletter.

Lab Report Format: Step-by-Step Guide & Examples

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

In psychology, a lab report outlines a study’s objectives, methods, results, discussion, and conclusions, ensuring clarity and adherence to APA (or relevant) formatting guidelines.

A typical lab report would include the following sections: title, abstract, introduction, method, results, and discussion.

The title page, abstract, references, and appendices are started on separate pages (subsections from the main body of the report are not). Use double-line spacing of text, font size 12, and include page numbers.

The report should have a thread of arguments linking the prediction in the introduction to the content of the discussion.

This must indicate what the study is about. It must include the variables under investigation. It should not be written as a question.

Title pages should be formatted in APA style .

The abstract provides a concise and comprehensive summary of a research report. Your style should be brief but not use note form. Look at examples in journal articles . It should aim to explain very briefly (about 150 words) the following:

• Start with a one/two sentence summary, providing the aim and rationale for the study.
• Describe participants and setting: who, when, where, how many, and what groups?
• Describe the method: what design, what experimental treatment, what questionnaires, surveys, or tests were used.
• Describe the major findings, including a mention of the statistics used and the significance levels, or simply one sentence summing up the outcome.
• The final sentence(s) outline the study’s “contribution to knowledge” within the literature. What does it all mean? Mention the implications of your findings if appropriate.

The abstract comes at the beginning of your report but is written at the end (as it summarises information from all the other sections of the report).

Introduction

The purpose of the introduction is to explain where your hypothesis comes from (i.e., it should provide a rationale for your research study).

Ideally, the introduction should have a funnel structure: Start broad and then become more specific. The aims should not appear out of thin air; the preceding review of psychological literature should lead logically into the aims and hypotheses.

• Start with general theory, briefly introducing the topic. Define the important key terms.
• Explain the theoretical framework.
• Summarise and synthesize previous studies – What was the purpose? Who were the participants? What did they do? What did they find? What do these results mean? How do the results relate to the theoretical framework?
• Rationale: How does the current study address a gap in the literature? Perhaps it overcomes a limitation of previous research.
• Aims and hypothesis. Write a paragraph explaining what you plan to investigate and make a clear and concise prediction regarding the results you expect to find.

There should be a logical progression of ideas that aids the flow of the report. This means the studies outlined should lead logically to your aims and hypotheses.

Do be concise and selective, and avoid the temptation to include anything in case it is relevant (i.e., don’t write a shopping list of studies).

USE THE FOLLOWING SUBHEADINGS:

Participants

• How many participants were recruited?
• Say how you obtained your sample (e.g., opportunity sample).
• Give relevant demographic details (e.g., gender, ethnicity, age range, mean age, and standard deviation).
• State the experimental design .
• What were the independent and dependent variables ? Make sure the independent variable is labeled and name the different conditions/levels.
• For example, if gender is the independent variable label, then male and female are the levels/conditions/groups.
• How were the IV and DV operationalized?
• Identify any controls used, e.g., counterbalancing and control of extraneous variables.
• List all the materials and measures (e.g., what was the title of the questionnaire? Was it adapted from a study?).
• You do not need to include wholesale replication of materials – instead, include a ‘sensible’ (illustrate) level of detail. For example, give examples of questionnaire items.
• Include the reliability (e.g., alpha values) for the measure(s).
• Describe the precise procedure you followed when conducting your research, i.e., exactly what you did.
• Describe in sufficient detail to allow for replication of findings.
• Be concise in your description and omit extraneous/trivial details, e.g., you don’t need to include details regarding instructions, debrief, record sheets, etc.
• Assume the reader has no knowledge of what you did and ensure that he/she can replicate (i.e., copy) your study exactly by what you write in this section.
• Write in the past tense.
• Don’t justify or explain in the Method (e.g., why you chose a particular sampling method); just report what you did.
• Only give enough detail for someone to replicate the experiment – be concise in your writing.
• The results section of a paper usually presents descriptive statistics followed by inferential statistics.
• Report the means, standard deviations, and 95% confidence intervals (CIs) for each IV level. If you have four to 20 numbers to present, a well-presented table is best, APA style.
• Name the statistical test being used.
• Report appropriate statistics (e.g., t-scores, p values ).
• Report the magnitude (e.g., are the results significant or not?) as well as the direction of the results (e.g., which group performed better?).
• It is optional to report the effect size (this does not appear on the SPSS output).
• Avoid interpreting the results (save this for the discussion).
• Make sure the results are presented clearly and concisely. A table can be used to display descriptive statistics if this makes the data easier to understand.
• DO NOT include any raw data.
• Follow APA style.

Use APA Style

• Numbers reported to 2 d.p. (incl. 0 before the decimal if 1.00, e.g., “0.51”). The exceptions to this rule: Numbers which can never exceed 1.0 (e.g., p -values, r-values): report to 3 d.p. and do not include 0 before the decimal place, e.g., “.001”.
• Percentages and degrees of freedom: report as whole numbers.
• Statistical symbols that are not Greek letters should be italicized (e.g., M , SD , t , X 2 , F , p , d ).
• Include spaces on either side of the equals sign.
• When reporting 95%, CIs (confidence intervals), upper and lower limits are given inside square brackets, e.g., “95% CI [73.37, 102.23]”
• Outline your findings in plain English (avoid statistical jargon) and relate your results to your hypothesis, e.g., is it supported or rejected?
• Compare your results to background materials from the introduction section. Are your results similar or different? Discuss why/why not.
• How confident can we be in the results? Acknowledge limitations, but only if they can explain the result obtained. If the study has found a reliable effect, be very careful suggesting limitations as you are doubting your results. Unless you can think of any c onfounding variable that can explain the results instead of the IV, it would be advisable to leave the section out.
• Suggest constructive ways to improve your study if appropriate.
• What are the implications of your findings? Say what your findings mean for how people behave in the real world.
• Suggest an idea for further research triggered by your study, something in the same area but not simply an improved version of yours. Perhaps you could base this on a limitation of your study.
• Concluding paragraph – Finish with a statement of your findings and the key points of the discussion (e.g., interpretation and implications) in no more than 3 or 4 sentences.

Reference Page

The reference section lists all the sources cited in the essay (alphabetically). It is not a bibliography (a list of the books you used).

In simple terms, every time you refer to a psychologist’s name (and date), you need to reference the original source of information.

If you have been using textbooks this is easy as the references are usually at the back of the book and you can just copy them down. If you have been using websites then you may have a problem as they might not provide a reference section for you to copy.

References need to be set out APA style :

Author, A. A. (year). Title of work . Location: Publisher.

Journal Articles

Author, A. A., Author, B. B., & Author, C. C. (year). Article title. Journal Title, volume number (issue number), page numbers

A simple way to write your reference section is to use Google scholar . Just type the name and date of the psychologist in the search box and click on the “cite” link.

Next, copy and paste the APA reference into the reference section of your essay.

Once again, remember that references need to be in alphabetical order according to surname.

Psychology Lab Report Example

Quantitative paper template.

Quantitative professional paper template: Adapted from “Fake News, Fast and Slow: Deliberation Reduces Belief in False (but Not True) News Headlines,” by B. Bago, D. G. Rand, and G. Pennycook, 2020,  Journal of Experimental Psychology: General ,  149 (8), pp. 1608–1613 ( https://doi.org/10.1037/xge0000729 ). Copyright 2020 by the American Psychological Association.

Qualitative paper template

Qualitative professional paper template: Adapted from “‘My Smartphone Is an Extension of Myself’: A Holistic Qualitative Exploration of the Impact of Using a Smartphone,” by L. J. Harkin and D. Kuss, 2020,  Psychology of Popular Media ,  10 (1), pp. 28–38 ( https://doi.org/10.1037/ppm0000278 ). Copyright 2020 by the American Psychological Association.

Related Articles

Student Resources

How To Cite A YouTube Video In APA Style – With Examples

How to Write an Abstract APA Format

APA References Page Formatting and Example

APA Title Page (Cover Page) Format, Example, & Templates

How do I Cite a Source with Multiple Authors in APA Style?

How to Write a Psychology Essay

Conclusions

This page will support you in satisfying Writing Learning Outcome:  

CONCLUSION - Provide an effective conclusion that summarizes the laboratory's purpose, processes, and key findings, and makes appropriate recommendations. 

Learning Objectives

You should be able to

Identify technical audience expectations for engineering lab report conclusions.

Describe what makes a conclusion meaningful, especially to a technical audience.

Relate the idea of audience expectations to prior writing instruction.

Write meaningful conclusions for an engineering lab report.

Summarize the important contents of the laboratory report clearly, succinctly, and with sufficient specificity.

Support conclusions with the evidence presented earlier in the lab report.

What is a Meaningful Conclusion in an Engineering Lab Report?

A conclusion is meaningful if it includes a summary of the work (i.e., objective and process) as well as the key findings (i.e., the results of the work and their implications) of the lab work.

The technical audience expects the following features to make the conclusion meaningful.

Restate the objective briefly.

Restate the lab process briefly.

Restate the important results of the lab work briefly, including any significant errors.

Restate the important findings briefly to meet the objective.

Provide brief recommendations for future actions or laboratories.

What Are Some Common Mistakes Seen in Poorly Written Engineering Lab Reports?

No conclusion is included in the report.

The conclusion is missing an important part (i.e., lab o bjective and key results) of the lab.

New data or new discussion is included that was not written in the report body.

Concluding statements do not address the stated objectives of the report.

The conclusion includes opinions only rather than the facts supported by other sections of the report.

Statements are overly general without containing any meaningful takeaways.

Statements are overly specific with the detailed descriptions which are supposed to be in the body.

Sample Conclusions

Why Does the Technical Audience Value Meaningful Conclusions From Engineering Lab Reports?

The technical audience reads the lab report conclusions carefully to take away the writer’s most important information. If the conclusion is well written, they may not need to read any other part of the report or know that they want to read the rest of the report to understand important details.

How Can we Use Engineering Judgment When Drawing Lab Report Conclusions?

In the context of engineering lab reports, engineering judgment can be defined as an application of evidence (i.e., lab data) and engineering principles (i.e., theory) to make decisions. The technical audience can trust the conclusions only when they are based on accurate data. The writer should use appropriate engineering principles when investigating and discussing lab data.

Common Mistakes

The conclusion is missing an important part (i.e., key results) of the lab.

Kim, J., Kim, D., (2019) “How engineering students draw conclusions from lab reports and design project reports in junior-level engineering courses,” The Proceedings of 2019 ASEE Annual Conference and Exposition, Tampa, FL, June 2019. https://peer.asee.org/how-engineering-students-draw-conclusions-from-lab-reports-and-design-project-reports-injunior-level-engineering-courses.pdf

“Argument Papers”, Purdue University, Purdue Online Writing Lab, Argument Papers, https://owl.purdue.edu/owl/general_writing/common_writing_assignments/argument_papers/conclusions.html

“Student Writing Guide”, University of Minnesota Department of Mechanical Engineering, http://www.me.umn.edu/education/undergraduate/writing/MESWG-Lab.1.5.pdf

How to Write a Lab Report

Lab Reports Describe Your Experiment

• Chemical Laws
• Periodic Table
• Projects & Experiments
• Scientific Method
• Biochemistry
• Physical Chemistry
• Medical Chemistry
• Chemistry In Everyday Life
• Famous Chemists
• Activities for Kids
• Abbreviations & Acronyms
• Weather & Climate
• Ph.D., Biomedical Sciences, University of Tennessee at Knoxville
• B.A., Physics and Mathematics, Hastings College

Lab reports are an essential part of all laboratory courses and usually a significant part of your grade. If your instructor gives you an outline for how to write a lab report, use that. Some instructors require a lab report to be included in a lab notebook , while others will request a separate report. Here's a format for a lab report you can use if you aren't sure what to write or need an explanation of what to include in the different parts of the report.

A lab report is how you explain what you did in ​your experiment, what you learned, and what the results meant.

Lab Report Essentials

Not all lab reports have title pages, but if your instructor wants one, it would be a single page that states:​

• The title of the experiment.
• Your name and the names of any lab partners.
• Your instructor's name.
• The date the lab was performed or the date the report was submitted.

The title says what you did. It should be brief (aim for ten words or less) and describe the main point of the experiment or investigation. An example of a title would be: "Effects of Ultraviolet Light on Borax Crystal Growth Rate". If you can, begin your title using a keyword rather than an article like "The" or "A".

Introduction or Purpose

Usually, the introduction is one paragraph that explains the objectives or purpose of the lab. In one sentence, state the hypothesis. Sometimes an introduction may contain background information, briefly summarize how the experiment was performed, state the findings of the experiment, and list the conclusions of the investigation. Even if you don't write a whole introduction, you need to state the purpose of the experiment, or why you did it. This would be where you state your hypothesis .

List everything needed to complete your experiment.

Describe the steps you completed during your investigation. This is your procedure. Be sufficiently detailed that anyone could read this section and duplicate your experiment. Write it as if you were giving direction for someone else to do the lab. It may be helpful to provide a figure to diagram your experimental setup.

Numerical data obtained from your procedure usually presented as a table. Data encompasses what you recorded when you conducted the experiment. It's just the facts, not any interpretation of what they mean.

Describe in words what the data means. Sometimes the Results section is combined with the Discussion.

Discussion or Analysis

The Data section contains numbers; the Analysis section contains any calculations you made based on those numbers. This is where you interpret the data and determine whether or not a hypothesis was accepted. This is also where you would discuss any mistakes you might have made while conducting the investigation. You may wish to describe ways the study might have been improved.

Conclusions

Most of the time the conclusion is a single paragraph that sums up what happened in the experiment, whether your hypothesis was accepted or rejected, and what this means.

Figures and Graphs

Graphs and figures must both be labeled with a descriptive title. Label the axes on a graph, being sure to include units of measurement. The independent variable is on the X-axis, the dependent variable (the one you are measuring) is on the Y-axis. Be sure to refer to figures and graphs in the text of your report: the first figure is Figure 1, the second figure is Figure 2, etc.

If your research was based on someone else's work or if you cited facts that require documentation, then you should list these references.

• Null Hypothesis Examples
• Examples of Independent and Dependent Variables
• How to Format a Biology Lab Report
• Science Lab Report Template - Fill in the Blanks
• How to Write a Science Fair Project Report
• How to Write an Abstract for a Scientific Paper
• Six Steps of the Scientific Method
• How To Design a Science Fair Experiment
• Understanding Simple vs Controlled Experiments
• Make a Science Fair Poster or Display
• Scientific Method Lesson Plan
• How to Organize Your Science Fair Poster
• What Is an Experiment? Definition and Design
• What Are the Elements of a Good Hypothesis?

Complete Guide to Writing a Lab Report (With Example)

Students tend to approach writing lab reports with confusion and dread. Whether in high school science classes or undergraduate laboratories, experiments are always fun and games until the times comes to submit a lab report. What if we didn’t need to spend hours agonizing over this piece of scientific writing? Our lives would be so much easier if we were told what information to include, what to do with all their data and how to use references. Well, here’s a guide to all the core components in a well-written lab report, complete with an example.

Things to Include in a Laboratory Report

The laboratory report is simply a way to show that you understand the link between theory and practice while communicating through clear and concise writing. As with all forms of writing, it’s not the report’s length that matters, but the quality of the information conveyed within. This article outlines the important bits that go into writing a lab report (title, abstract, introduction, method, results, discussion, conclusion, reference). At the end is an example report of reducing sugar analysis with Benedict’s reagent.

The report’s title should be short but descriptive, indicating the qualitative or quantitative nature of the practical along with the primary goal or area of focus.

Following this should be the abstract, 2-3 sentences summarizing the practical. The abstract shows the reader the main results of the practical and helps them decide quickly whether the rest of the report is relevant to their use. Remember that the whole report should be written in a passive voice .

Introduction

The introduction provides context to the experiment in a couple of paragraphs and relevant diagrams. While a short preamble outlining the history of the techniques or materials used in the practical is appropriate, the bulk of the introduction should outline the experiment’s goals, creating a logical flow to the next section.

Some reports require you to write down the materials used, which can be combined with this section. The example below does not include a list of materials used. If unclear, it is best to check with your teacher or demonstrator before writing your lab report from scratch.

Step-by-step methods are usually provided in high school and undergraduate laboratory practicals, so it’s just a matter of paraphrasing them. This is usually the section that teachers and demonstrators care the least about. Any unexpected changes to the experimental setup or techniques can also be documented here.

The results section should include the raw data that has been collected in the experiment as well as calculations that are performed. It is usually appropriate to include diagrams; depending on the experiment, these can range from scatter plots to chromatograms.

The discussion is the most critical part of the lab report as it is a chance for you to show that you have a deep understanding of the practical and the theory behind it. Teachers and lecturers tend to give this section the most weightage when marking the report. It would help if you used the discussion section to address several points:

• Explain the results gathered. Is there a particular trend? Do the results support the theory behind the experiment?
• Highlight any unexpected results or outlying data points. What are possible sources of error?
• Address the weaknesses of the experiment. Refer to the materials and methods used to identify improvements that would yield better results (more accurate equipment, better experimental technique, etc.)  

Finally, a short paragraph to conclude the laboratory report. It should summarize the findings and provide an objective review of the experiment.

If any external sources were used in writing the lab report, they should go here. Referencing is critical in scientific writing; it’s like giving a shout out (known as a citation) to the original provider of the information. It is good practice to have at least one source referenced, either from researching the context behind the experiment, best practices for the method used or similar industry standards.

Google Scholar is a good resource for quickly gathering references of a specific style . Searching for the article in the search bar and clicking on the ‘cite’ button opens a pop-up that allows you to copy and paste from several common referencing styles.

Example: Writing a Lab Report

Title : Semi-Quantitative Analysis of Food Products using Benedict’s Reagent

Abstract : Food products (milk, chicken, bread, orange juice) were solubilized and tested for reducing sugars using Benedict’s reagent. Milk contained the highest level of reducing sugars at ~2%, while chicken contained almost no reducing sugars.

Introduction : Sugar detection has been of interest for over 100 years, with the first test for glucose using copper sulfate developed by German chemist Karl Trommer in 1841. It was used to test the urine of diabetics, where sugar was present in high amounts. However, it wasn’t until 1907 when the method was perfected by Stanley Benedict, using sodium citrate and sodium carbonate to stabilize the copper sulfate in solution. Benedict’s reagent is a bright blue because of the copper sulfate, turning green and then red as the concentration of reducing sugars increases.

Benedict’s reagent was used in this experiment to compare the amount of reducing sugars between four food items: milk, chicken solution, bread and orange juice. Following this, standardized glucose solutions (0.0%, 0.5%, 1.0%, 1.5%, 2.0%) were tested with Benedict’s reagent to determine the color produced at those sugar levels, allowing us to perform a semi-quantitative analysis of the food items.

Method : Benedict’s reagent was prepared by mixing 1.73 g of copper (II) sulfate pentahydrate, 17.30 g of sodium citrate pentahydrate and 10.00 g of sodium carbonate anhydrous. The mixture was dissolved with stirring and made up to 100 ml using distilled water before filtration using filter paper and a funnel to remove any impurities.

4 ml of milk, chicken solution and orange juice (commercially available) were measured in test tubes, along with 4 ml of bread solution. The bread solution was prepared using 4 g of dried bread ground with mortar and pestle before diluting with distilled water up to 4 ml. Then, 4 ml of Benedict’s reagent was added to each test tube and placed in a boiling water bath for 5 minutes, then each test tube was observed.

Next, glucose solutions were prepared by dissolving 0.5 g, 1.0 g, 1.5 g and 2.0 g of glucose in 100 ml of distilled water to produce 0.5%, 1.0%, 1.5% and 2.0% solutions, respectively. 4 ml of each solution was added to 4 ml of Benedict’s reagent in a test tube and placed in a boiling water bath for 5 minutes, then each test tube was observed.

Results : Food Solutions (4 ml) with Benedict’s Reagent (4 ml)

Glucose Solutions (4 ml) with Benedict’s Reagent (4 ml)

Semi-Quantitative Analysis from Data

Discussion : From the analysis of food solutions along with the glucose solutions of known concentrations, the semi-quantitative analysis of sugar levels in different food products was performed. Milk had the highest sugar content of 2%, with orange juice at 1.5%, bread at 0.5% and chicken with 0% sugar. These values were approximated; the standard solutions were not the exact color of the food solutions, but the closest color match was chosen.

One point of contention was using the orange juice solution, which conferred color to the starting solution, rendering it green before the reaction started. This could have led to the final color (and hence, sugar quantity) being inaccurate. Also, since comparing colors using eyesight alone is inaccurate, the experiment could be improved with a colorimeter that can accurately determine the exact wavelength of light absorbed by the solution.

Another downside of Benedict’s reagent is its inability to react with non-reducing sugars. Reducing sugars encompass all sugar types that can be oxidized from aldehydes or ketones into carboxylic acids. This means that all monosaccharides (glucose, fructose, etc.) are reducing sugars, while only select polysaccharides are. Disaccharides like sucrose and trehalose cannot be oxidized, hence are non-reducing and will not react with Benedict’s reagent. Furthermore, Benedict’s reagent cannot distinguish between different types of reducing sugars.

Conclusion : Using Benedict’s reagent, different food products were analyzed semi-quantitatively for their levels of reducing sugars. Milk contained around 2% sugar, while the chicken solution had no sugar. Overall, the experiment was a success, although the accuracy of the results could have been improved with the use of quantitative equipment and methods.

Reference :

• Raza, S. I., Raza, S. A., Kazmi, M., Khan, S., & Hussain, I. (2021). 100 Years of Glucose Monitoring in Diabetes Management.  Journal of Diabetes Mellitus ,  11 (5), 221-233.
• Benedict, Stanley R (1909). A Reagent for the Detection of Reducing Sugars.  Journal of Biological Chemistry ,  5 , 485-487.

Using this guide and example, writing a lab report should be a hassle-free, perhaps even enjoyable process!

About the Author

Sean is a consultant for clients in the pharmaceutical industry and is an associate lecturer at La Trobe University, where unfortunate undergrads are subject to his ramblings on chemistry and pharmacology.

You Might Also Like…

How to decide between liquid or gas chromatography.

Solving a 50-Year-Old Puzzle: AlphaFold 2 and Protein Folding

If our content has been helpful to you, please consider supporting our independent science publishing efforts: for just $1 a month.

© 2023 FTLOScience • All Rights Reserved

Scientific Reports

What this handout is about.

This handout provides a general guide to writing reports about scientific research you’ve performed. In addition to describing the conventional rules about the format and content of a lab report, we’ll also attempt to convey why these rules exist, so you’ll get a clearer, more dependable idea of how to approach this writing situation. Readers of this handout may also find our handout on writing in the sciences useful.

Background and pre-writing

Why do we write research reports.

You did an experiment or study for your science class, and now you have to write it up for your teacher to review. You feel that you understood the background sufficiently, designed and completed the study effectively, obtained useful data, and can use those data to draw conclusions about a scientific process or principle. But how exactly do you write all that? What is your teacher expecting to see?

To take some of the guesswork out of answering these questions, try to think beyond the classroom setting. In fact, you and your teacher are both part of a scientific community, and the people who participate in this community tend to share the same values. As long as you understand and respect these values, your writing will likely meet the expectations of your audience—including your teacher.

So why are you writing this research report? The practical answer is “Because the teacher assigned it,” but that’s classroom thinking. Generally speaking, people investigating some scientific hypothesis have a responsibility to the rest of the scientific world to report their findings, particularly if these findings add to or contradict previous ideas. The people reading such reports have two primary goals:

• They want to gather the information presented.
• They want to know that the findings are legitimate.

Your job as a writer, then, is to fulfill these two goals.

How do I do that?

Good question. Here is the basic format scientists have designed for research reports:

• Introduction

Methods and Materials

This format, sometimes called “IMRAD,” may take slightly different shapes depending on the discipline or audience; some ask you to include an abstract or separate section for the hypothesis, or call the Discussion section “Conclusions,” or change the order of the sections (some professional and academic journals require the Methods section to appear last). Overall, however, the IMRAD format was devised to represent a textual version of the scientific method.

The scientific method, you’ll probably recall, involves developing a hypothesis, testing it, and deciding whether your findings support the hypothesis. In essence, the format for a research report in the sciences mirrors the scientific method but fleshes out the process a little. Below, you’ll find a table that shows how each written section fits into the scientific method and what additional information it offers the reader.

Thinking of your research report as based on the scientific method, but elaborated in the ways described above, may help you to meet your audience’s expectations successfully. We’re going to proceed by explicitly connecting each section of the lab report to the scientific method, then explaining why and how you need to elaborate that section.

Although this handout takes each section in the order in which it should be presented in the final report, you may for practical reasons decide to compose sections in another order. For example, many writers find that composing their Methods and Results before the other sections helps to clarify their idea of the experiment or study as a whole. You might consider using each assignment to practice different approaches to drafting the report, to find the order that works best for you.

What should I do before drafting the lab report?

The best way to prepare to write the lab report is to make sure that you fully understand everything you need to about the experiment. Obviously, if you don’t quite know what went on during the lab, you’re going to find it difficult to explain the lab satisfactorily to someone else. To make sure you know enough to write the report, complete the following steps:

• What are we going to do in this lab? (That is, what’s the procedure?)
• Why are we going to do it that way?
• What are we hoping to learn from this experiment?
• Why would we benefit from this knowledge?
• Consult your lab supervisor as you perform the lab. If you don’t know how to answer one of the questions above, for example, your lab supervisor will probably be able to explain it to you (or, at least, help you figure it out).
• Plan the steps of the experiment carefully with your lab partners. The less you rush, the more likely it is that you’ll perform the experiment correctly and record your findings accurately. Also, take some time to think about the best way to organize the data before you have to start putting numbers down. If you can design a table to account for the data, that will tend to work much better than jotting results down hurriedly on a scrap piece of paper.
• Record the data carefully so you get them right. You won’t be able to trust your conclusions if you have the wrong data, and your readers will know you messed up if the other three people in your group have “97 degrees” and you have “87.”
• Consult with your lab partners about everything you do. Lab groups often make one of two mistakes: two people do all the work while two have a nice chat, or everybody works together until the group finishes gathering the raw data, then scrams outta there. Collaborate with your partners, even when the experiment is “over.” What trends did you observe? Was the hypothesis supported? Did you all get the same results? What kind of figure should you use to represent your findings? The whole group can work together to answer these questions.
• Consider your audience. You may believe that audience is a non-issue: it’s your lab TA, right? Well, yes—but again, think beyond the classroom. If you write with only your lab instructor in mind, you may omit material that is crucial to a complete understanding of your experiment, because you assume the instructor knows all that stuff already. As a result, you may receive a lower grade, since your TA won’t be sure that you understand all the principles at work. Try to write towards a student in the same course but a different lab section. That student will have a fair degree of scientific expertise but won’t know much about your experiment particularly. Alternatively, you could envision yourself five years from now, after the reading and lectures for this course have faded a bit. What would you remember, and what would you need explained more clearly (as a refresher)?

Once you’ve completed these steps as you perform the experiment, you’ll be in a good position to draft an effective lab report.

Introductions

How do i write a strong introduction.

For the purposes of this handout, we’ll consider the Introduction to contain four basic elements: the purpose, the scientific literature relevant to the subject, the hypothesis, and the reasons you believed your hypothesis viable. Let’s start by going through each element of the Introduction to clarify what it covers and why it’s important. Then we can formulate a logical organizational strategy for the section.

The inclusion of the purpose (sometimes called the objective) of the experiment often confuses writers. The biggest misconception is that the purpose is the same as the hypothesis. Not quite. We’ll get to hypotheses in a minute, but basically they provide some indication of what you expect the experiment to show. The purpose is broader, and deals more with what you expect to gain through the experiment. In a professional setting, the hypothesis might have something to do with how cells react to a certain kind of genetic manipulation, but the purpose of the experiment is to learn more about potential cancer treatments. Undergraduate reports don’t often have this wide-ranging a goal, but you should still try to maintain the distinction between your hypothesis and your purpose. In a solubility experiment, for example, your hypothesis might talk about the relationship between temperature and the rate of solubility, but the purpose is probably to learn more about some specific scientific principle underlying the process of solubility.

For starters, most people say that you should write out your working hypothesis before you perform the experiment or study. Many beginning science students neglect to do so and find themselves struggling to remember precisely which variables were involved in the process or in what way the researchers felt that they were related. Write your hypothesis down as you develop it—you’ll be glad you did.

As for the form a hypothesis should take, it’s best not to be too fancy or complicated; an inventive style isn’t nearly so important as clarity here. There’s nothing wrong with beginning your hypothesis with the phrase, “It was hypothesized that . . .” Be as specific as you can about the relationship between the different objects of your study. In other words, explain that when term A changes, term B changes in this particular way. Readers of scientific writing are rarely content with the idea that a relationship between two terms exists—they want to know what that relationship entails.

Not a hypothesis:

“It was hypothesized that there is a significant relationship between the temperature of a solvent and the rate at which a solute dissolves.”

Hypothesis:

“It was hypothesized that as the temperature of a solvent increases, the rate at which a solute will dissolve in that solvent increases.”

Put more technically, most hypotheses contain both an independent and a dependent variable. The independent variable is what you manipulate to test the reaction; the dependent variable is what changes as a result of your manipulation. In the example above, the independent variable is the temperature of the solvent, and the dependent variable is the rate of solubility. Be sure that your hypothesis includes both variables.

Justify your hypothesis

You need to do more than tell your readers what your hypothesis is; you also need to assure them that this hypothesis was reasonable, given the circumstances. In other words, use the Introduction to explain that you didn’t just pluck your hypothesis out of thin air. (If you did pluck it out of thin air, your problems with your report will probably extend beyond using the appropriate format.) If you posit that a particular relationship exists between the independent and the dependent variable, what led you to believe your “guess” might be supported by evidence?

Scientists often refer to this type of justification as “motivating” the hypothesis, in the sense that something propelled them to make that prediction. Often, motivation includes what we already know—or rather, what scientists generally accept as true (see “Background/previous research” below). But you can also motivate your hypothesis by relying on logic or on your own observations. If you’re trying to decide which solutes will dissolve more rapidly in a solvent at increased temperatures, you might remember that some solids are meant to dissolve in hot water (e.g., bouillon cubes) and some are used for a function precisely because they withstand higher temperatures (they make saucepans out of something). Or you can think about whether you’ve noticed sugar dissolving more rapidly in your glass of iced tea or in your cup of coffee. Even such basic, outside-the-lab observations can help you justify your hypothesis as reasonable.

Background/previous research

This part of the Introduction demonstrates to the reader your awareness of how you’re building on other scientists’ work. If you think of the scientific community as engaging in a series of conversations about various topics, then you’ll recognize that the relevant background material will alert the reader to which conversation you want to enter.

Generally speaking, authors writing journal articles use the background for slightly different purposes than do students completing assignments. Because readers of academic journals tend to be professionals in the field, authors explain the background in order to permit readers to evaluate the study’s pertinence for their own work. You, on the other hand, write toward a much narrower audience—your peers in the course or your lab instructor—and so you must demonstrate that you understand the context for the (presumably assigned) experiment or study you’ve completed. For example, if your professor has been talking about polarity during lectures, and you’re doing a solubility experiment, you might try to connect the polarity of a solid to its relative solubility in certain solvents. In any event, both professional researchers and undergraduates need to connect the background material overtly to their own work.

Organization of this section

Most of the time, writers begin by stating the purpose or objectives of their own work, which establishes for the reader’s benefit the “nature and scope of the problem investigated” (Day 1994). Once you have expressed your purpose, you should then find it easier to move from the general purpose, to relevant material on the subject, to your hypothesis. In abbreviated form, an Introduction section might look like this:

“The purpose of the experiment was to test conventional ideas about solubility in the laboratory [purpose] . . . According to Whitecoat and Labrat (1999), at higher temperatures the molecules of solvents move more quickly . . . We know from the class lecture that molecules moving at higher rates of speed collide with one another more often and thus break down more easily [background material/motivation] . . . Thus, it was hypothesized that as the temperature of a solvent increases, the rate at which a solute will dissolve in that solvent increases [hypothesis].”

Again—these are guidelines, not commandments. Some writers and readers prefer different structures for the Introduction. The one above merely illustrates a common approach to organizing material.

How do I write a strong Materials and Methods section?

As with any piece of writing, your Methods section will succeed only if it fulfills its readers’ expectations, so you need to be clear in your own mind about the purpose of this section. Let’s review the purpose as we described it above: in this section, you want to describe in detail how you tested the hypothesis you developed and also to clarify the rationale for your procedure. In science, it’s not sufficient merely to design and carry out an experiment. Ultimately, others must be able to verify your findings, so your experiment must be reproducible, to the extent that other researchers can follow the same procedure and obtain the same (or similar) results.

Here’s a real-world example of the importance of reproducibility. In 1989, physicists Stanley Pons and Martin Fleischman announced that they had discovered “cold fusion,” a way of producing excess heat and power without the nuclear radiation that accompanies “hot fusion.” Such a discovery could have great ramifications for the industrial production of energy, so these findings created a great deal of interest. When other scientists tried to duplicate the experiment, however, they didn’t achieve the same results, and as a result many wrote off the conclusions as unjustified (or worse, a hoax). To this day, the viability of cold fusion is debated within the scientific community, even though an increasing number of researchers believe it possible. So when you write your Methods section, keep in mind that you need to describe your experiment well enough to allow others to replicate it exactly.

With these goals in mind, let’s consider how to write an effective Methods section in terms of content, structure, and style.

Sometimes the hardest thing about writing this section isn’t what you should talk about, but what you shouldn’t talk about. Writers often want to include the results of their experiment, because they measured and recorded the results during the course of the experiment. But such data should be reserved for the Results section. In the Methods section, you can write that you recorded the results, or how you recorded the results (e.g., in a table), but you shouldn’t write what the results were—not yet. Here, you’re merely stating exactly how you went about testing your hypothesis. As you draft your Methods section, ask yourself the following questions:

• How much detail? Be precise in providing details, but stay relevant. Ask yourself, “Would it make any difference if this piece were a different size or made from a different material?” If not, you probably don’t need to get too specific. If so, you should give as many details as necessary to prevent this experiment from going awry if someone else tries to carry it out. Probably the most crucial detail is measurement; you should always quantify anything you can, such as time elapsed, temperature, mass, volume, etc.
• Rationale: Be sure that as you’re relating your actions during the experiment, you explain your rationale for the protocol you developed. If you capped a test tube immediately after adding a solute to a solvent, why did you do that? (That’s really two questions: why did you cap it, and why did you cap it immediately?) In a professional setting, writers provide their rationale as a way to explain their thinking to potential critics. On one hand, of course, that’s your motivation for talking about protocol, too. On the other hand, since in practical terms you’re also writing to your teacher (who’s seeking to evaluate how well you comprehend the principles of the experiment), explaining the rationale indicates that you understand the reasons for conducting the experiment in that way, and that you’re not just following orders. Critical thinking is crucial—robots don’t make good scientists.
• Control: Most experiments will include a control, which is a means of comparing experimental results. (Sometimes you’ll need to have more than one control, depending on the number of hypotheses you want to test.) The control is exactly the same as the other items you’re testing, except that you don’t manipulate the independent variable-the condition you’re altering to check the effect on the dependent variable. For example, if you’re testing solubility rates at increased temperatures, your control would be a solution that you didn’t heat at all; that way, you’ll see how quickly the solute dissolves “naturally” (i.e., without manipulation), and you’ll have a point of reference against which to compare the solutions you did heat.

Describe the control in the Methods section. Two things are especially important in writing about the control: identify the control as a control, and explain what you’re controlling for. Here is an example:

“As a control for the temperature change, we placed the same amount of solute in the same amount of solvent, and let the solution stand for five minutes without heating it.”

Structure and style

Organization is especially important in the Methods section of a lab report because readers must understand your experimental procedure completely. Many writers are surprised by the difficulty of conveying what they did during the experiment, since after all they’re only reporting an event, but it’s often tricky to present this information in a coherent way. There’s a fairly standard structure you can use to guide you, and following the conventions for style can help clarify your points.

• Subsections: Occasionally, researchers use subsections to report their procedure when the following circumstances apply: 1) if they’ve used a great many materials; 2) if the procedure is unusually complicated; 3) if they’ve developed a procedure that won’t be familiar to many of their readers. Because these conditions rarely apply to the experiments you’ll perform in class, most undergraduate lab reports won’t require you to use subsections. In fact, many guides to writing lab reports suggest that you try to limit your Methods section to a single paragraph.
• Narrative structure: Think of this section as telling a story about a group of people and the experiment they performed. Describe what you did in the order in which you did it. You may have heard the old joke centered on the line, “Disconnect the red wire, but only after disconnecting the green wire,” where the person reading the directions blows everything to kingdom come because the directions weren’t in order. We’re used to reading about events chronologically, and so your readers will generally understand what you did if you present that information in the same way. Also, since the Methods section does generally appear as a narrative (story), you want to avoid the “recipe” approach: “First, take a clean, dry 100 ml test tube from the rack. Next, add 50 ml of distilled water.” You should be reporting what did happen, not telling the reader how to perform the experiment: “50 ml of distilled water was poured into a clean, dry 100 ml test tube.” Hint: most of the time, the recipe approach comes from copying down the steps of the procedure from your lab manual, so you may want to draft the Methods section initially without consulting your manual. Later, of course, you can go back and fill in any part of the procedure you inadvertently overlooked.
• Past tense: Remember that you’re describing what happened, so you should use past tense to refer to everything you did during the experiment. Writers are often tempted to use the imperative (“Add 5 g of the solid to the solution”) because that’s how their lab manuals are worded; less frequently, they use present tense (“5 g of the solid are added to the solution”). Instead, remember that you’re talking about an event which happened at a particular time in the past, and which has already ended by the time you start writing, so simple past tense will be appropriate in this section (“5 g of the solid were added to the solution” or “We added 5 g of the solid to the solution”).
• Active: We heated the solution to 80°C. (The subject, “we,” performs the action, heating.)
• Passive: The solution was heated to 80°C. (The subject, “solution,” doesn’t do the heating–it is acted upon, not acting.)

Increasingly, especially in the social sciences, using first person and active voice is acceptable in scientific reports. Most readers find that this style of writing conveys information more clearly and concisely. This rhetorical choice thus brings two scientific values into conflict: objectivity versus clarity. Since the scientific community hasn’t reached a consensus about which style it prefers, you may want to ask your lab instructor.

How do I write a strong Results section?

Here’s a paradox for you. The Results section is often both the shortest (yay!) and most important (uh-oh!) part of your report. Your Materials and Methods section shows how you obtained the results, and your Discussion section explores the significance of the results, so clearly the Results section forms the backbone of the lab report. This section provides the most critical information about your experiment: the data that allow you to discuss how your hypothesis was or wasn’t supported. But it doesn’t provide anything else, which explains why this section is generally shorter than the others.

Before you write this section, look at all the data you collected to figure out what relates significantly to your hypothesis. You’ll want to highlight this material in your Results section. Resist the urge to include every bit of data you collected, since perhaps not all are relevant. Also, don’t try to draw conclusions about the results—save them for the Discussion section. In this section, you’re reporting facts. Nothing your readers can dispute should appear in the Results section.

Most Results sections feature three distinct parts: text, tables, and figures. Let’s consider each part one at a time.

This should be a short paragraph, generally just a few lines, that describes the results you obtained from your experiment. In a relatively simple experiment, one that doesn’t produce a lot of data for you to repeat, the text can represent the entire Results section. Don’t feel that you need to include lots of extraneous detail to compensate for a short (but effective) text; your readers appreciate discrimination more than your ability to recite facts. In a more complex experiment, you may want to use tables and/or figures to help guide your readers toward the most important information you gathered. In that event, you’ll need to refer to each table or figure directly, where appropriate:

“Table 1 lists the rates of solubility for each substance”

“Solubility increased as the temperature of the solution increased (see Figure 1).”

If you do use tables or figures, make sure that you don’t present the same material in both the text and the tables/figures, since in essence you’ll just repeat yourself, probably annoying your readers with the redundancy of your statements.

Feel free to describe trends that emerge as you examine the data. Although identifying trends requires some judgment on your part and so may not feel like factual reporting, no one can deny that these trends do exist, and so they properly belong in the Results section. Example:

“Heating the solution increased the rate of solubility of polar solids by 45% but had no effect on the rate of solubility in solutions containing non-polar solids.”

This point isn’t debatable—you’re just pointing out what the data show.

As in the Materials and Methods section, you want to refer to your data in the past tense, because the events you recorded have already occurred and have finished occurring. In the example above, note the use of “increased” and “had,” rather than “increases” and “has.” (You don’t know from your experiment that heating always increases the solubility of polar solids, but it did that time.)

You shouldn’t put information in the table that also appears in the text. You also shouldn’t use a table to present irrelevant data, just to show you did collect these data during the experiment. Tables are good for some purposes and situations, but not others, so whether and how you’ll use tables depends upon what you need them to accomplish.

Tables are useful ways to show variation in data, but not to present a great deal of unchanging measurements. If you’re dealing with a scientific phenomenon that occurs only within a certain range of temperatures, for example, you don’t need to use a table to show that the phenomenon didn’t occur at any of the other temperatures. How useful is this table?

As you can probably see, no solubility was observed until the trial temperature reached 50°C, a fact that the text part of the Results section could easily convey. The table could then be limited to what happened at 50°C and higher, thus better illustrating the differences in solubility rates when solubility did occur.

As a rule, try not to use a table to describe any experimental event you can cover in one sentence of text. Here’s an example of an unnecessary table from How to Write and Publish a Scientific Paper , by Robert A. Day:

As Day notes, all the information in this table can be summarized in one sentence: “S. griseus, S. coelicolor, S. everycolor, and S. rainbowenski grew under aerobic conditions, whereas S. nocolor and S. greenicus required anaerobic conditions.” Most readers won’t find the table clearer than that one sentence.

When you do have reason to tabulate material, pay attention to the clarity and readability of the format you use. Here are a few tips:

• Number your table. Then, when you refer to the table in the text, use that number to tell your readers which table they can review to clarify the material.
• Give your table a title. This title should be descriptive enough to communicate the contents of the table, but not so long that it becomes difficult to follow. The titles in the sample tables above are acceptable.
• Arrange your table so that readers read vertically, not horizontally. For the most part, this rule means that you should construct your table so that like elements read down, not across. Think about what you want your readers to compare, and put that information in the column (up and down) rather than in the row (across). Usually, the point of comparison will be the numerical data you collect, so especially make sure you have columns of numbers, not rows.Here’s an example of how drastically this decision affects the readability of your table (from A Short Guide to Writing about Chemistry , by Herbert Beall and John Trimbur). Look at this table, which presents the relevant data in horizontal rows:

It’s a little tough to see the trends that the author presumably wants to present in this table. Compare this table, in which the data appear vertically:

The second table shows how putting like elements in a vertical column makes for easier reading. In this case, the like elements are the measurements of length and height, over five trials–not, as in the first table, the length and height measurements for each trial.

• Make sure to include units of measurement in the tables. Readers might be able to guess that you measured something in millimeters, but don’t make them try.
• Don’t use vertical lines as part of the format for your table. This convention exists because journals prefer not to have to reproduce these lines because the tables then become more expensive to print. Even though it’s fairly unlikely that you’ll be sending your Biology 11 lab report to Science for publication, your readers still have this expectation. Consequently, if you use the table-drawing option in your word-processing software, choose the option that doesn’t rely on a “grid” format (which includes vertical lines).

How do I include figures in my report?

Although tables can be useful ways of showing trends in the results you obtained, figures (i.e., illustrations) can do an even better job of emphasizing such trends. Lab report writers often use graphic representations of the data they collected to provide their readers with a literal picture of how the experiment went.

When should you use a figure?

Remember the circumstances under which you don’t need a table: when you don’t have a great deal of data or when the data you have don’t vary a lot. Under the same conditions, you would probably forgo the figure as well, since the figure would be unlikely to provide your readers with an additional perspective. Scientists really don’t like their time wasted, so they tend not to respond favorably to redundancy.

If you’re trying to decide between using a table and creating a figure to present your material, consider the following a rule of thumb. The strength of a table lies in its ability to supply large amounts of exact data, whereas the strength of a figure is its dramatic illustration of important trends within the experiment. If you feel that your readers won’t get the full impact of the results you obtained just by looking at the numbers, then a figure might be appropriate.

Of course, an undergraduate class may expect you to create a figure for your lab experiment, if only to make sure that you can do so effectively. If this is the case, then don’t worry about whether to use figures or not—concentrate instead on how best to accomplish your task.

Figures can include maps, photographs, pen-and-ink drawings, flow charts, bar graphs, and section graphs (“pie charts”). But the most common figure by far, especially for undergraduates, is the line graph, so we’ll focus on that type in this handout.

At the undergraduate level, you can often draw and label your graphs by hand, provided that the result is clear, legible, and drawn to scale. Computer technology has, however, made creating line graphs a lot easier. Most word-processing software has a number of functions for transferring data into graph form; many scientists have found Microsoft Excel, for example, a helpful tool in graphing results. If you plan on pursuing a career in the sciences, it may be well worth your while to learn to use a similar program.

Computers can’t, however, decide for you how your graph really works; you have to know how to design your graph to meet your readers’ expectations. Here are some of these expectations:

• Keep it as simple as possible. You may be tempted to signal the complexity of the information you gathered by trying to design a graph that accounts for that complexity. But remember the purpose of your graph: to dramatize your results in a manner that’s easy to see and grasp. Try not to make the reader stare at the graph for a half hour to find the important line among the mass of other lines. For maximum effectiveness, limit yourself to three to five lines per graph; if you have more data to demonstrate, use a set of graphs to account for it, rather than trying to cram it all into a single figure.
• Plot the independent variable on the horizontal (x) axis and the dependent variable on the vertical (y) axis. Remember that the independent variable is the condition that you manipulated during the experiment and the dependent variable is the condition that you measured to see if it changed along with the independent variable. Placing the variables along their respective axes is mostly just a convention, but since your readers are accustomed to viewing graphs in this way, you’re better off not challenging the convention in your report.
• Label each axis carefully, and be especially careful to include units of measure. You need to make sure that your readers understand perfectly well what your graph indicates.
• Number and title your graphs. As with tables, the title of the graph should be informative but concise, and you should refer to your graph by number in the text (e.g., “Figure 1 shows the increase in the solubility rate as a function of temperature”).
• Many editors of professional scientific journals prefer that writers distinguish the lines in their graphs by attaching a symbol to them, usually a geometric shape (triangle, square, etc.), and using that symbol throughout the curve of the line. Generally, readers have a hard time distinguishing dotted lines from dot-dash lines from straight lines, so you should consider staying away from this system. Editors don’t usually like different-colored lines within a graph because colors are difficult and expensive to reproduce; colors may, however, be great for your purposes, as long as you’re not planning to submit your paper to Nature. Use your discretion—try to employ whichever technique dramatizes the results most effectively.
• Try to gather data at regular intervals, so the plot points on your graph aren’t too far apart. You can’t be sure of the arc you should draw between the plot points if the points are located at the far corners of the graph; over a fifteen-minute interval, perhaps the change occurred in the first or last thirty seconds of that period (in which case your straight-line connection between the points is misleading).
• If you’re worried that you didn’t collect data at sufficiently regular intervals during your experiment, go ahead and connect the points with a straight line, but you may want to examine this problem as part of your Discussion section.
• Make your graph large enough so that everything is legible and clearly demarcated, but not so large that it either overwhelms the rest of the Results section or provides a far greater range than you need to illustrate your point. If, for example, the seedlings of your plant grew only 15 mm during the trial, you don’t need to construct a graph that accounts for 100 mm of growth. The lines in your graph should more or less fill the space created by the axes; if you see that your data is confined to the lower left portion of the graph, you should probably re-adjust your scale.
• If you create a set of graphs, make them the same size and format, including all the verbal and visual codes (captions, symbols, scale, etc.). You want to be as consistent as possible in your illustrations, so that your readers can easily make the comparisons you’re trying to get them to see.

How do I write a strong Discussion section?

The discussion section is probably the least formalized part of the report, in that you can’t really apply the same structure to every type of experiment. In simple terms, here you tell your readers what to make of the Results you obtained. If you have done the Results part well, your readers should already recognize the trends in the data and have a fairly clear idea of whether your hypothesis was supported. Because the Results can seem so self-explanatory, many students find it difficult to know what material to add in this last section.

Basically, the Discussion contains several parts, in no particular order, but roughly moving from specific (i.e., related to your experiment only) to general (how your findings fit in the larger scientific community). In this section, you will, as a rule, need to:

Explain whether the data support your hypothesis

• Acknowledge any anomalous data or deviations from what you expected

Derive conclusions, based on your findings, about the process you’re studying

• Relate your findings to earlier work in the same area (if you can)

Explore the theoretical and/or practical implications of your findings

Let’s look at some dos and don’ts for each of these objectives.

This statement is usually a good way to begin the Discussion, since you can’t effectively speak about the larger scientific value of your study until you’ve figured out the particulars of this experiment. You might begin this part of the Discussion by explicitly stating the relationships or correlations your data indicate between the independent and dependent variables. Then you can show more clearly why you believe your hypothesis was or was not supported. For example, if you tested solubility at various temperatures, you could start this section by noting that the rates of solubility increased as the temperature increased. If your initial hypothesis surmised that temperature change would not affect solubility, you would then say something like,

“The hypothesis that temperature change would not affect solubility was not supported by the data.”

Note: Students tend to view labs as practical tests of undeniable scientific truths. As a result, you may want to say that the hypothesis was “proved” or “disproved” or that it was “correct” or “incorrect.” These terms, however, reflect a degree of certainty that you as a scientist aren’t supposed to have. Remember, you’re testing a theory with a procedure that lasts only a few hours and relies on only a few trials, which severely compromises your ability to be sure about the “truth” you see. Words like “supported,” “indicated,” and “suggested” are more acceptable ways to evaluate your hypothesis.

Also, recognize that saying whether the data supported your hypothesis or not involves making a claim to be defended. As such, you need to show the readers that this claim is warranted by the evidence. Make sure that you’re very explicit about the relationship between the evidence and the conclusions you draw from it. This process is difficult for many writers because we don’t often justify conclusions in our regular lives. For example, you might nudge your friend at a party and whisper, “That guy’s drunk,” and once your friend lays eyes on the person in question, she might readily agree. In a scientific paper, by contrast, you would need to defend your claim more thoroughly by pointing to data such as slurred words, unsteady gait, and the lampshade-as-hat. In addition to pointing out these details, you would also need to show how (according to previous studies) these signs are consistent with inebriation, especially if they occur in conjunction with one another. To put it another way, tell your readers exactly how you got from point A (was the hypothesis supported?) to point B (yes/no).

Acknowledge any anomalous data, or deviations from what you expected

You need to take these exceptions and divergences into account, so that you qualify your conclusions sufficiently. For obvious reasons, your readers will doubt your authority if you (deliberately or inadvertently) overlook a key piece of data that doesn’t square with your perspective on what occurred. In a more philosophical sense, once you’ve ignored evidence that contradicts your claims, you’ve departed from the scientific method. The urge to “tidy up” the experiment is often strong, but if you give in to it you’re no longer performing good science.

Sometimes after you’ve performed a study or experiment, you realize that some part of the methods you used to test your hypothesis was flawed. In that case, it’s OK to suggest that if you had the chance to conduct your test again, you might change the design in this or that specific way in order to avoid such and such a problem. The key to making this approach work, though, is to be very precise about the weakness in your experiment, why and how you think that weakness might have affected your data, and how you would alter your protocol to eliminate—or limit the effects of—that weakness. Often, inexperienced researchers and writers feel the need to account for “wrong” data (remember, there’s no such animal), and so they speculate wildly about what might have screwed things up. These speculations include such factors as the unusually hot temperature in the room, or the possibility that their lab partners read the meters wrong, or the potentially defective equipment. These explanations are what scientists call “cop-outs,” or “lame”; don’t indicate that the experiment had a weakness unless you’re fairly certain that a) it really occurred and b) you can explain reasonably well how that weakness affected your results.

If, for example, your hypothesis dealt with the changes in solubility at different temperatures, then try to figure out what you can rationally say about the process of solubility more generally. If you’re doing an undergraduate lab, chances are that the lab will connect in some way to the material you’ve been covering either in lecture or in your reading, so you might choose to return to these resources as a way to help you think clearly about the process as a whole.

This part of the Discussion section is another place where you need to make sure that you’re not overreaching. Again, nothing you’ve found in one study would remotely allow you to claim that you now “know” something, or that something isn’t “true,” or that your experiment “confirmed” some principle or other. Hesitate before you go out on a limb—it’s dangerous! Use less absolutely conclusive language, including such words as “suggest,” “indicate,” “correspond,” “possibly,” “challenge,” etc.

Relate your findings to previous work in the field (if possible)

We’ve been talking about how to show that you belong in a particular community (such as biologists or anthropologists) by writing within conventions that they recognize and accept. Another is to try to identify a conversation going on among members of that community, and use your work to contribute to that conversation. In a larger philosophical sense, scientists can’t fully understand the value of their research unless they have some sense of the context that provoked and nourished it. That is, you have to recognize what’s new about your project (potentially, anyway) and how it benefits the wider body of scientific knowledge. On a more pragmatic level, especially for undergraduates, connecting your lab work to previous research will demonstrate to the TA that you see the big picture. You have an opportunity, in the Discussion section, to distinguish yourself from the students in your class who aren’t thinking beyond the barest facts of the study. Capitalize on this opportunity by putting your own work in context.

If you’re just beginning to work in the natural sciences (as a first-year biology or chemistry student, say), most likely the work you’ll be doing has already been performed and re-performed to a satisfactory degree. Hence, you could probably point to a similar experiment or study and compare/contrast your results and conclusions. More advanced work may deal with an issue that is somewhat less “resolved,” and so previous research may take the form of an ongoing debate, and you can use your own work to weigh in on that debate. If, for example, researchers are hotly disputing the value of herbal remedies for the common cold, and the results of your study suggest that Echinacea diminishes the symptoms but not the actual presence of the cold, then you might want to take some time in the Discussion section to recapitulate the specifics of the dispute as it relates to Echinacea as an herbal remedy. (Consider that you have probably already written in the Introduction about this debate as background research.)

This information is often the best way to end your Discussion (and, for all intents and purposes, the report). In argumentative writing generally, you want to use your closing words to convey the main point of your writing. This main point can be primarily theoretical (“Now that you understand this information, you’re in a better position to understand this larger issue”) or primarily practical (“You can use this information to take such and such an action”). In either case, the concluding statements help the reader to comprehend the significance of your project and your decision to write about it.

Since a lab report is argumentative—after all, you’re investigating a claim, and judging the legitimacy of that claim by generating and collecting evidence—it’s often a good idea to end your report with the same technique for establishing your main point. If you want to go the theoretical route, you might talk about the consequences your study has for the field or phenomenon you’re investigating. To return to the examples regarding solubility, you could end by reflecting on what your work on solubility as a function of temperature tells us (potentially) about solubility in general. (Some folks consider this type of exploration “pure” as opposed to “applied” science, although these labels can be problematic.) If you want to go the practical route, you could end by speculating about the medical, institutional, or commercial implications of your findings—in other words, answer the question, “What can this study help people to do?” In either case, you’re going to make your readers’ experience more satisfying, by helping them see why they spent their time learning what you had to teach them.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

American Psychological Association. 2010. Publication Manual of the American Psychological Association . 6th ed. Washington, DC: American Psychological Association.

Beall, Herbert, and John Trimbur. 2001. A Short Guide to Writing About Chemistry , 2nd ed. New York: Longman.

Blum, Deborah, and Mary Knudson. 1997. A Field Guide for Science Writers: The Official Guide of the National Association of Science Writers . New York: Oxford University Press.

Booth, Wayne C., Gregory G. Colomb, Joseph M. Williams, Joseph Bizup, and William T. FitzGerald. 2016. The Craft of Research , 4th ed. Chicago: University of Chicago Press.

Briscoe, Mary Helen. 1996. Preparing Scientific Illustrations: A Guide to Better Posters, Presentations, and Publications , 2nd ed. New York: Springer-Verlag.

Council of Science Editors. 2014. Scientific Style and Format: The CSE Manual for Authors, Editors, and Publishers , 8th ed. Chicago & London: University of Chicago Press.

Davis, Martha. 2012. Scientific Papers and Presentations , 3rd ed. London: Academic Press.

Day, Robert A. 1994. How to Write and Publish a Scientific Paper , 4th ed. Phoenix: Oryx Press.

Porush, David. 1995. A Short Guide to Writing About Science . New York: Longman.

Williams, Joseph, and Joseph Bizup. 2017. Style: Lessons in Clarity and Grace , 12th ed. Boston: Pearson.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• Phoenix College

Lab Report Writing

• Discussion/Conclusion
• Lab Report Style
• Lab Report Format
• Introduction
• Materials and Methods

Discussion or Conclusion

Test yourself (discussion).

Once you've discussed the most important findings of your study in the Results section, you will use the Discussion section to interpret those findings and talk about why they are important (some instructors call this the Conclusion section). You might want to talk about how your results agree, or disagree, with the results from similar studies. Here you can also mention areas ways you could have improved your study or further research to be done on the topic. Do not just restate your results - talk about why they are significant and important. Here's a paragraph taken from the Discussion from the bone fracture paper. Notice how the authors relate their results to what is already known about the topic. The numbers in brackets refer to references listed at the end of their paper (not shown here).

The data indicate that avoiding a low level of physical activity substantially reduces the risk of all fractures, particularly hip fractures—the most devastating of osteoporotic fractures—in men. Even changes in physical activity during the follow-up affected hip fracture risk. As expected, those who maintained a high physical activity level had the lowest risk of hip fracture, but there was also a tendency towards a lower risk of fracture for those who increased their level of activity compared with those who reduced their level of activity, or compared with those who reported constant low activity. This observation has previously been made in women [8,16]. There are several possible mechanisms, related to muscle performance and balance as well as to bone architecture and strength, whereby physical activity can reduce the risk of fractures [28,29].

Which of the following is a good example of a sentence you would find in the Discussion section of a lab report?

a. Ten dogs with no previous training were selected for the study. b. Unlike in previous studies on dog training, most of the dogs in this study retained the ability to perform tricks for up to six weeks after the initial training sessions. c. Seven of the ten dogs learned how to "sit" after three training sessions. d. It was hypothesized that the dogs would be able to retain all of the training commands for six weeks after the initial training sessions.

B The Discussion should interpret the findings from the study and relate them to other similar studies. It is not the place to talk about the results, the methods use, or the original hypothesis.

Click on the question, to see the answer.

• << Previous: Results
• Next: References >>
• Last Updated: Jan 13, 2022 10:50 AM
• URL: https://phoenixcollege.libguides.com/LabReportWriting

• How To Find Articles with Databases
• How To Evaluate Articles
• How To Read A Scientific Paper
• How To Interpret Data
• How To Write A Lab Report
• How To Write A Scientific Paper
• Get More Help
• Reference: Encyclopedia, Handbooks & Dictionaries
• Research Tools: Databases, Protocols & Citation Locators
• E-Journal Lists by Subject
• Scholarly vs Popular
• Search Tips
• Open Resources
• E-Journal lists by subject
• Develop a Research Question

Writing Lab Reports

Writing lab reports follows a straightforward and structured procedure. It is important to recognize that each part of a lab report is important, so take the time to complete each carefully. A lab report is broken down into eight sections: title, abstract, introduction, methods and materials, results, discussion, conclusion, and references. 

• Ex: "Determining the Free Chlorine Content of Pool Water"
• Abstracts are a summary of the experiment as a whole and should familiarize the reader with the purpose of the research. 
• Abstracts will always be written last, even though they are the first paragraph of a lab report. 
• Not all lab reports will require an abstract. However, they are often included in upper-level lab reports and should be studied carefully. 
• Why was the research done or experiment conducted?
• What problem is being addressed?
• What results were found?
• What are the meaning of the results?
• How is the problem better understood now than before, if at all?

Introduction

• The introduction of a lab report discusses the problem being studied and other theory that is relevant to understanding the findings. 
• The hypothesis of the experiment and the motivation for the research are stated in this section. 
• Write the introduction in your own words. Try not to copy from a lab manual or other guidelines. Instead, show comprehension of the experiment by briefly explaining the problem.

Methods and Materials

• Ex: pipette, graduated cylinder, 1.13mg of Na, 0.67mg Ag
• List the steps taken as they actually happened during the experiment, not as they were supposed to happen. 
• If written correctly, another researcher should be able to duplicate the experiment and get the same or very similar results. 
• The results show the data that was collected or found during the experiment. 
• Explain in words the data that was collected.
• Tables should be labeled numerically, as "Table 1", "Table 2", etc. Other figures should be labeled numerically as "Figure 1", "Figure 2", etc. 
• Calculations to understand the data can also be presented in the results. 
• The discussion section is one of the most important parts of the lab report. It analyzes the results of the experiment and is a discussion of the data. 
• If any results are unexpected, explain why they are unexpected and how they did or did not effect the data obtained. 
• Analyze the strengths and weaknesses of the design of the experiment and compare your results to other similar experiments.
• If there are any experimental errors, analyze them.
• Explain your results and discuss them using relevant terms and theories.
• What do the results indicate?
• What is the significance of the results?
• Are there any gaps in knowledge?
• Are there any new questions that have been raised?
• The conclusion is a summation of the experiment. It should clearly and concisely state what was learned and its importance.
• If there is future work that needs to be done, it can be explained in the conclusion.
• If using any outside sources to support a claim or explain background information, those sources must be cited in the references section of the lab report. 
• In the event that no outside sources are used, the references section may be left out. 

Other Useful Sources

• The Lab Report
• Sample Laboratory Report #2
• Some Tips on Writing Lab Reports
• Writing a Science Lab Report
• << Previous: How To Interpret Data
• Next: How To Write A Scientific Paper >>
• Last Updated: Mar 8, 2024 2:26 PM
• URL: https://guides.libraries.indiana.edu/STEM

Social media

• Instagram for Herman B Wells Library
• Facebook for IU Libraries

Additional resources

Featured databases.

• Resource available to authorized IU Bloomington users (on or off campus) OneSearch@IU
• Resource available to authorized IU Bloomington users (on or off campus) Academic Search (EBSCO)
• Resource available to authorized IU Bloomington users (on or off campus) ERIC (EBSCO)
• Resource available to authorized IU Bloomington users (on or off campus) Nexis Uni
• Resource available without restriction HathiTrust Digital Library
• Databases A-Z
• Resource available to authorized IU Bloomington users (on or off campus) Google Scholar
• Resource available to authorized IU Bloomington users (on or off campus) JSTOR
• Resource available to authorized IU Bloomington users (on or off campus) Web of Science
• Resource available to authorized IU Bloomington users (on or off campus) Scopus
• Resource available to authorized IU Bloomington users (on or off campus) WorldCat

IU Libraries

• Diversity Resources
• About IU Libraries
• Alumni & Friends
• Departments & Staff
• Jobs & Libraries HR
• Intranet (Staff)
• IUL site admin

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• Science Writing

How to Write a Science Lab Report

Last Updated: February 29, 2024 Fact Checked

This article was co-authored by Meredith Juncker, PhD . Meredith Juncker is a PhD candidate in Biochemistry and Molecular Biology at Louisiana State University Health Sciences Center. Her studies are focused on proteins and neurodegenerative diseases. There are 14 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 358,962 times.

Depending on the expectations of your program, the preferences of your teacher or adviser, and the level of education you are currently at, there are many variations of science lab reports you might use. Generally speaking, your science lab report should have a title, abstract, introduction, a list of materials used in your experiment, a description of methods used, your results, discussion about your results, and a list of literature cited. [1] X Research source [2] X Research source This may seem like an overwhelming amount of work, but by adhering to a few guidelines and putting in the necessary effort, you'll soon have a report your instructor will love.

Sample Lab Report and Writing Help

Formulating a Plan for Your Report

• You may have performed supplemental experiments/simulations or repeated your initial experience after receiving your first round of feedback.
• (a) Self-review and revision
• (b) Peer review and constructive feedback
• (c) Advisor/instructor review and feedback

• It can help remind yourself of this goal at the beginning of every section before starting writing.
• When you finish a section of your report, read it through carefully, and at the end of it, ask yourself: was that easy to read and understand? Did I succeed in my goal?

• If you believe your paper might be of use to researchers in another discipline, like social science, you may want to include definitions or explanations for the more technical jargon used in your paper.

• Since different instructors have different preferences, you should check your lab report handout or course syllabus to verify expectations for the order and content of your report. [4] X Research source
• Most lab reports are organized, first to last: background information, problem, hypothesis, materials, procedure, data, and your interpretation of what happened as a conclusion.

• The organization of the body of your lab report will be specific to your problem/experiment.
• You may also have a separate section for the statement of your design methodology, experimental methodology, or proving subsidiary/intermediary theorems in your report.

Writing a Top-down Outline

• The section-level outline
• The subsection-level outline
• The paragraph-level outline

• Bullet points are invaluable when you reach the paragraph level of your report. These will allow you to note important terms, phrases, and data that will need to be integrated with the text of your report.
• Take special note, at the paragraph level, of important symbols, protocols, algorithms, and jargon.

• You might also consider using simple figures as a way of cutting down unnecessary wordiness.

Writing Your Introduction and Abstract

• The title of your report should reflect what you have done and bring out any eye-catching factor of your work.
• The abstract should be concise, generally about 2 paragraphs or about 200 words in length. [9] X Research source

• (a) Main motivation
• (b) Main design point
• (c) Essential differences from previous work
• (d) Methodology
• (e) Noteworthy results, if any

• What is the setting of the problem? This is, in other words, the background. In some cases, this may be implicit, and in some cases, this question may be merged with your paper's motivation.
• What is the problem you are trying to solve? This is also known as the problem statement of your report.
• Why is your problem important? This is the motivation behind your report. In some cases, it may be implicit in the background, or even the problem statement.
• Is the problem still unsolved? The constitutes the statement of past/related work, and should be conveyed succinctly. [10] X Research source

• Each section of the body of your report can be thought of as an in-depth look at the points mentioned in the introduction.

• Why is your problem difficult to solve?
• How have you solved the problem?
• What are the conditions under which your solution is applicable?
• What are the main results?
• What is the summary of your contributions? This, in some cases, maybe implicit in the body of your introduction. Sometimes it helps to state contributions explicitly.
• How is the rest of your report organized?

Writing the Body of Your Lab Report

• Describe the equipment or theory in a short paragraph.
• Consider including a diagram of the apparatus for equipment.
• Theoretical elements should be included in both natural and derived forms. [15] X Research source
• Include what strategies and methodologies you are using for the experiment.

• A large quantity of work closely related to your work would likely be best closer to the beginning of your report. This will allow you to point out differences best.
• Relevant work that is substantially different from your own is probably best toward the end of your report. However, this placement risks leaving your readers wondering about differences until the end of your report.

• Functionality
• Performance
• 1. Functionality
• 3. Implementation
• 4. Anticipated results or successes

• Make sure to cite the work of others so you can avoid plagiarism and give yourself more credibility.
• If you decide to use a chart, it is a general convention that you include your own work in either the first or last column.

• All figures and tables should be titled descriptively, numbered sequentially, and include a descriptive legend for symbols, abbreviations, etc.
• The columns and rows of all tables and the axes of graphs should be labeled. [16] X Research source

• What aspects of your system or algorithm are you trying to evaluate? Why?
• What are the cases of comparison? If you have proposed an algorithm or a design, what do you compare it with?
• What are the performance metrics? Why?
• What are the parameters understudy?
• What is the experimental setup?

Concluding Your Lab Report

• Predictions are expected in this section, though these should be clearly identified as such.
• Future experiments that might clarify your results should be suggested. [17] X Research source

• Precisely and in as few words as possible state the main findings of your lab.
• Answer the question: How has the reader become smarter, or how does your research and work fit into the bigger picture?

Getting the Most Out of Peer Review

• Many academic papers are reviewed 3 times by 3 sets of reviewers before they are published. Take constructive criticism for your lab report if you plan to pursue a career in academics.

• You might also make use of your campus writing center, if available. Here you can have a fresh set of eyes assess the quality of your report.

• Title/abstract logical, understandable, and eye-catching?
• All relevant questions answered in the introduction?
• Overall structure of sections and subsections meaningful?
• Is there a logical flow of information?
• Differences between related/past work apparent?
• Technical sections intelligible?
• Figures/tables explained properly?
• Use of terminology clear?
• Symbols defined appropriately?
• Results explained properly?
• Technical holes/flaws?
• Potential problems or alternatives?

• Try to keep your comments as impersonal as possible. Locate specific elements that can be isolated, targeted, and improved.
• While taking feedback from a peer, take the comments on their technical merit and avoid being defensive.

Expert Q&A

• If you're looking for how to write a lab report for elementary, junior, or high school, try Write a Good Lab Conclusion in Science . Thanks Helpful 0 Not Helpful 0

• Under no circumstances should you plagiarize the work of another. Doing so can result in immediate expulsion from most universities, and could tarnish your reputation as an academic. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ https://guides.libraries.indiana.edu/c.php?g=992698&p=7182653
• ↑ https://libguides.lmu.edu/c.php?g=324079&p=2174135
• ↑ https://www.apu.edu/live_data/files/288/lab_reports.pdf
• ↑ https://services.unimelb.edu.au/__data/assets/pdf_file/0009/471276/Writing_Science_Laboratory_Reports_Update_051112.pdf
• ↑ https://owl.english.purdue.edu/owl/resource/544/02/
• ↑ https://biology.kenyon.edu/Bio_InfoLit/how/page2.html
• ↑ https://www.trentu.ca/academicskills/how-guides/how-succeed-math-and-science/writing-lab-reports/writing-lab-reports-figures-and-tables
• ↑ https://writingcenter.gmu.edu/writing-resources/different-genres/writing-an-abstract
• ↑ https://www.vanderbilt.edu/writing/resources/handouts/introducing-a-lab-report/
• ↑ https://writing.engr.psu.edu/workbooks/laboratory.html
• ↑ https://www.mhhe.com/biosci/genbio/maderinquiry/writing.html
• ↑ https://lsa.umich.edu/sweetland/undergraduates/writing-guides/how-do-i-present-findings-from-my-experiment-in-a-report-.html
• ↑ https://www.chem.ucla.edu/~gchemlab/labnotebook_web.htm
• ↑ https://guides.lib.purdue.edu/c.php?g=352816&p=2377942

About This Article

To write a lab report, start by coming up with a title that points to what you’ve done and an abstract that summarizes your work in 2 paragraphs. Follow this up with an introduction, which should introduce the problem you’re trying to solve, and explain why it’s important. Next, write a section on your materials and methods that informs the reader how you did your work. Additionally, present your results in a separate section, and highlight key points so they’re not overlooked. Finally, conclude with a section discussing the significance of your results and any problems with the study. For tips on how to write a top-down outline for your report and make the most of peer reviews, read on! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Blanca Huerta

Oct 26, 2018

Did this article help you?

May 20, 2017

Alice Roberson

Oct 29, 2017

Primrose Matthews

Sep 10, 2017

Sep 12, 2017

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help Pro:

Develop the tech skills you need for work and life

Custom Essay, Term Paper & Research paper writing services

• testimonials

Toll Free: +1 (888) 354-4744

Email: [email protected]

Writing custom essays & research papers since 2008

How to write a lab report conclusion.

Like other reports, without a conclusion, a lab report is incomplete. Conclusions are an integral part of lab reports and are fundamental to the demonstration of report objectives and reiteration of findings.

Although conclusions are often short, confined to a paragraph, they are nonetheless some of the most difficult aspects of a lab report.

This article will, therefore, explain how to write a good conclusion for a lab report. But before that, it will remind you of the basics and format of lab reports for a comprehensive exposition.

Basic Lab Report

All reports describe the process of an experiment or a study from the beginning to the end. There are several categories of reports and a lab report is one of them.

A lab report follows the same routine as a typical report. Except that in a lab report, you are mostly dealing with scientific and laboratory experiments. In other words, a lab report describes the process of a scientific and laboratory experiment from the beginning to the end.

A lab report is required to test what students — whether chemistry students or biology students — had learned in the course of an experiment.

Ideally, a lab report begins with an introduction and ends with a conclusion. Conclusion is often the part where the results of experiments are reiterated and readers are provided with a short but general overview of the whole process.

Science Lab Report Format

Unlike other reports, a lab report is fundamentally a science experiment report. A scientific report documents the process, procedures, and findings of scientific research.

An example of a scientific report is an academic essay a teacher asked you to submit about technology or the one you wrote about cancer.

Whether your lab report is biological or chemical, there is a format to all scientific reports. A typical scientific laboratory report will contain:

• Purpose: A brief description of what the research is all about, including the methods used and the resources available to the student.
• Hypothesis: Guess statements on expected results of the scientific experiment.
• Procedure: A step-by-step guide and instructions followed by the student in the course of the experiment.
• Lab Safety: Safety precautions adhered to by the student throughout the experiment.
• Data: Recorded experimental data generated on the experiment by the student.
• Observations: The sudden burst of insight and perspectives about the experiment.
• Results: The findings of the student from the experiment through collected data and observations.
• Conclusion: Summary of the experiment, most especially as the findings relate to the report’s purpose and hypothesis.

Lab Report Conclusion

As a university or college science student, writing a lab report might not be new to you but it is a challenging process. This is because the whole lab report structure consumes. From the objective of the experiment to lab report conclusions, each structure wrestles for time.

Learning how to write a discussion and conclusion for a lab report is not the same as learning how to write a lab report itself. While it could be said that knowing the latter should help with the former, it is not always so. There are several examples of great lab reports with shabby conclusions.

Conclusions can prove tricky and this is the reason why you need to learn how to write them. To conclude lab reports, you would need to be familiar with the lab report conclusion outline (also called the lab report conclusion template). You can consider the following 5 outlines:

The first step to take before you conclude your reports is to assess the whole report from the beginning to where it stopped. This means you would need to visit and revisit the whole experiment to be sure that no structure of your report is left out.

The purpose of this is for you to go through the process of the report again. Experiments are usually consuming and at some points, you might get lost or stuck in a part and thereby lose that sense of touch with other parts. But if you can assess the whole experiment again, it would be easy to jot down the process in the report for a succinct conclusion.

After you might have assessed the whole report, you would need to pay more attention to the introduction of your report under this step. You should be looking at the proposed purpose of your report here and see if it tallies with what you intend to conclude with.

The introductory part of your report must align with the conclusive part. The introduction part should not be saying something different from the conclusion unless your report risks a crime of inconsistency. Consistency is essential to every great scientific and laboratory report.

Now that you have assessed the general report and the introductory, the next stage is to apply the RERUN Method to conclude your report. The RERUN is a useful acronym for integrating the essential parts of your experiment in your conclusion. Just as the rest of the report, conclusions also contain key ingredients.

RERUN stands for Restate, Explain, Results, Uncertainties , and New . To brilliantly conclude your report, you would need to follow the acronym and apply what each letter stands for.

When you want to conclude, you should Restate the lab experiment and Explain what the whole project is set out to achieve. Then proceed to explain the Results through the generated data and confirmation of the hypothesis. After that, make provisions for the Uncertainty and discuss New matters or solutions arising from the experiment.

• Add Sections If necessary, you should add other sections of your experiment. Depending on the purpose of your project, you might need to add your data procedures or part of your observations to it. While the RERUN Method is a great way to conclude, it is not absolute. For instance, you may ask yourself “What is the importance of calculations in a lab report or my lab report?” and try to include the section where necessary.
• Conclusive Assessment Once you are done with the conclusion, you should assess that part again. You should look out for errors, consistency, and how the whole part of your report reads with and without that portion of the added conclusion. How long should a lab report conclusion be? It should be as concise and precise as possible.

Examples of Lab Report Conclusion

Provided are examples of a good scientific report conclusion and a bad one. The good one follows the outlines of concluding a report while the bad one negates the outlines. Through the examples, you can glean how best to conclude your report.

Good Example

A good report conclusion will contain all 5 outlines (mentioned above) that can be deployed for summing up your reports. Here is an example:

“In conclusion, team management is a process and only indicates the many strategies that go into it, helped by effective decision-making sequential and procedural. Since most decisions begin from problems, it is pertinent that the processes of decision-making reflect the identification of problems, definition of them, decision, action, and feedback. Through the sequences, it would be noted that decision-making can be programmed or non-programmed, depending on the flexibility and occurrence; and can be operational, tactical, or strategic, depending on the duration of the problem needed to be solved. Besides, there are styles of decision-making, informed by actions. These actions, however, should always be checked and balanced through effective feedback.”

Before the report conclusion was written, a general assessment of the whole report was made to jot down the process and relearned the experience. The first report hinges on team management and decision-making, both themes were justified.

Also, through an introductory assessment, the topic sentence and purpose of the report were clear. The conclusion was well-organized and the report was not bereft of the conclusion outlines not excluding the RERUN Method.

Bad Example

This is one of the examples of a bad report conclusion.

“The infant stage is considered fundamental. It is the stage where all other stages are premised. It is thus plausible that development theories be looked at from this stage. The stage shows how Piaget’s and Vygotsky’s theories work, which in turn provide perspectives to understanding breastfeeding and mental health in infants.”

From the conclusion, it can be gleaned that the report does not follow the outlines as well as the RERUN Method. The thesis statement was unclear and the conclusion itself seems hurriedly done.

Need Help With Writing a Lab Report Conclusion?

Learning how to write a conclusion for a biology lab report or a chemistry lab report or just any other lab report can be challenging. You could bypass the challenges, anyway, by hiring cheap and trusted homework help or an expert. You would need to be certain they could be trusted with your deadline and are quality enough to earn you top grades in class. Otherwise, you should learn the nitty-gritty of lab reports yourself.

It shouldn’t be difficult to learn how to end a conclusion in a lab report, considering that this article has taken you through the process of lab report itself and then the outlines of lab report conclusions. Also provided are lab report conclusion examples — both good and bad — that you can model yours after.

• Science Notes Posts
• Contact Science Notes
• Todd Helmenstine Biography
• Anne Helmenstine Biography
• Free Printable Periodic Tables (PDF and PNG)
• Periodic Table Wallpapers
• Interactive Periodic Table
• Periodic Table Posters
• How to Grow Crystals
• Chemistry Projects
• Fire and Flames Projects
• Holiday Science
• Chemistry Problems With Answers
• Physics Problems
• Unit Conversion Example Problems
• Chemistry Worksheets
• Biology Worksheets
• Periodic Table Worksheets
• Physical Science Worksheets
• Science Lab Worksheets
• My Amazon Books

Lab Report Format – How to Write a Laboratory Report

A science laboratory experiment isn’t truly complete until you’ve written the lab report. You may have taken excellent notes in your laboratory notebook, but it isn’t the same as a lab report. The lab report format is designed to present experimental results so they can be shared with others. A well-written report explains what you did, why you did it, and what you learned. It should also generate reader interest, potentially leading to peer-reviewed publication and funding.

Sections of a Lab Report

There is no one lab report format. The format and sections might be specified by your instructor or employer. What really matters is covering all of the important information.

Label the sections (except the title). Use bold face type for the title and headings. The order is:

You may or may not be expected to provide a title page. If it is required, the title page includes the title of the experiment, the names of the researchers, the name of the institution, and the date.

The title describes the experiment. Don’t start it with an article (e.g., the, an, a) because it messes up databases and isn’t necessary. For example, a good title might be, “Effect of Increasing Glucose Concentration on Danio rerio Egg Hatching Rates.” Use title case and italicize the scientific names of any species.

Introduction

Sometimes the introduction is broken into separate sections. Otherwise, it’s written as a narrative that includes the following information:

• State the purpose of the experiment.
• State the hypothesis.
• Review earlier work on the subject. Refer to previous studies. Cover the background so a reader understands what is known about a subject and what you hope to learn that is new.
• Describe your approach to answering a question or solving a problem. Include a theory or equation, if appropriate.

This section describes experimental design. Identify the parameter you changed ( independent variable ) and the one you measured ( dependent variable ). Describe the equipment and set-up you used, materials, and methods. If a reader can’t picture the apparatus from your description, include a photograph or diagram. Sometimes this section is broken into “Materials” and “Methods.”

Your lab notebook contains all of the data you collected in the experiment. You aren’t expected to reproduce all of this in a lab report. Instead, provide labelled tables and graphs. The first figure is Figure 1, the second is Figure 2, etc. The first graph is Graph 1. Refer to figures and graphs by their figure number. For some experiments, you may need to include labelled photographs. Cite the results of any calculations you performed, such as slope and standard deviation. Discuss sources of error here, including instrument, standard, and random errors.

Discussion or Conclusions

While the “Results” section includes graphs and tables, the “Discussion” or “Conclusions” section focuses on what the results mean. This is where you state whether or not the objective of the experiment was met and what the outcome means.  Propose reasons for discrepancies between expected and actual outcomes. Finally, describe the next logical step in your research and ways you might improve on the experiment.

References or Bibliography

Did you build upon work conducted by someone else? Cite the work. Did you consult a paper relating to the experiment? Credit the author. If you’re unsure whether to cite a reference or not, a good rule of thumb is to include a reference for any fact not known to your audience. For some reports, it’s only necessary to list publications directly relating to your procedure and conclusions.

The Tone of a Lab Report

Lab reports should be informative, not entertaining. This isn’t the place for humor, sarcasm, or flowery prose. A lab report should be:

• Concise : Cover all the key points without getting crazy with the details.
• Objective : In the “Conclusions” section, you can propose possible explanations for your results. Otherwise, keep your opinions out of the report. Instead, present facts and an analysis based on logic and math.
• Critical : After presenting what you did, the report focuses on what the data means. Be on the lookout for sources of error and identify them. Use your understanding of error to determine how reliable your results are and gauge confidence in your conclusions.

Related Posts

Chemistry Hall

Chemistry hall – from cutting-edge research highlights to educational resources.

How to Write the Perfect Chemistry Lab Report: A Definitive Guide

February 11, 2020 By Guest Posts Leave a Comment

Students have to deal with multiple academic tasks, and writing lab reports (lots of them!) is one of them. Its main purpose is to explain what you did in your experiment, what you learned and what the results meant.

Performing experiments and reporting them properly is a cornerstone of on your way into learning chemistry .

But how do you write a chemistry lab report properly?

It’s now time to find out!

Our ultimate guide sheds light on the main parts of lab report writing. You ought to be aware of every section and understand how to complete them properly. Therefore, we have divided our guide into three major sections that are:

• Parts of the lab report;
• A step-by-step review;
• Writing your project.

General Information

It’s necessary to begin with an overview of the main sections that should be present on a laboratory report for chemistry.

Mind that sometimes these sections are called differently but have the same purpose. Some of the sections may be missing, but the general structure should be close to this. Everything depends on the educational institution.

It is important to know that usually lab reports are written after the lab session is finished . This means that you need to have everything previously recorded in your lab notebook . You are supposed to keep track of everything you do in the lab in your laboratory notebook, and then using that notebook to write down your lab report, not the other way around.

Reviewing Every Step

Now, we’d like to go through the main stages of a chemistry lab report. It’s necessary to add brief comments concerning each of them. Your laboratory report begins with a title page. You already know what it consists of. Let’s check how to compose it correctly. The information must be presented on the upper right-hand side of the page. All the points (the title, your name, collaborators, etc.) should be mentioned on the separate line.

Afterward comes the second part, which includes:

• The course title
• Title of the experiment
• Title of the parts within the experiment
• Semester, year, etc. (optional)

This data appears in the middle of the title page.

The next section is the Introduction and it begins with this word in the left upper corner of your report. It should consist of no more than a couple of paragraphs and end with at least one hypothesis.

The body of your project consists of the procedure, materials and methods employed; data; results and observations.  The section Procedure commonly consists of several steps that were followed for the proper conduction of the experiment(s). They could be divided in different parts, and those would describe your actions.

The section Data contains the numerical facts and Observations that provide the changes that took place. Afterwards, you move to the Discussions, in which you ought to plainly explain all the numbers, observations and collected data. Your conclusions provide an overall summary of the entire lab report, and the whole experimental session itself.

Writing a Chemistry Lab Report

The last lap in our “race” is to write a laboratory report . We have already mentioned the main constituents of the title page. Therefore, we can hit the text of your project. Your abstract appears soon after the title page. An abstract is a quick summary that sums up the whole thing (hypothesis to be proven, and conclusions that are reached). Nonetheless, you should leave some space and skip it until the entire project is finished. It is recommended to write the abstract last. The main point is that this section provides a brief review of what your lab report is about and what you’ve managed to achieve.

Main Sections

The introductory part tells your readers what to expect from the project. Write a couple o paragraphs and explain the purpose of your experiment. Including references here is also highly encouraged. The last sentence of your introduction is called a hypothesis or a thesis statement. It shows what you hope to achieve at the end of your research.

The main body consists of several parts and of course, each has its purpose. You should introduce the materials and methods you need to conduct the research. Explain your choice and how your choice helps to conduct a safe and accurate study.

Take instant records of everything that happens during the experiment in your lab notebook . Never rely on your memory!

Afterwards, you’ll interpret the data and explain it using plain words. Don’t draw any conclusions when you record data and don’t explain it in the section called Results. This function should be fulfilled in the sections Discussions or Analysis sections, which should come right afterwards.

Your conclusion makes a brief summary. It should consist of 3-4 sentences, not many more. Restate your hypothesis in other words. Mention whether you’ve achieved your initial goal and explain its value.

Importantly, do realize that if a hypothesis cannot be proven, or an experiment doesn’t give you the results you expected, it doesn’t mean that your experiment and lab session was a failure. It is extremely common in chemistry to find yourself on this kind of situations! You only need to be able to explain why you got the results that you got, and how would you go around to fix them!

Further Sections on Your Report

Don’t forget about the contributors (labmates, supervisiors…) to your research.

You should also obligatorily use some secondary sources to support your theory. Therefore, you have to cite and make references according to the assigned writing format. You can reference other articles all over your manuscript (especially in the introduction and discussion sections), but don’t forget to put them together (or at the bottom of each page), and cite them properly.

The final step is to proofread your lab report. You’re free to use reading aloud and in your head, reading everything again, and using special grammar and spelling checking applications.

To sum up, keep in mind all these guidelines when you’re assigned to write a lab report. Thus, you’ll never miss something important, which can cost you essential grades. Write each section properly to receive the highest grades for your experiment. Always be clear, cite the appropriate references, and be objective with your analysis and conclusions!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed .

AFFILIATE DISCLAIMER

Privacy overview.

Writing Studio

Writing a lab report: introduction and discussion section guide.

In an effort to make our handouts more accessible, we have begun converting our PDF handouts to web pages. Download this page as a PDF:   Writing a Lab Report Return to Writing Studio Handouts

Part 1 (of 2): Introducing a Lab Report

The introduction of a lab report states the objective of the experiment and provides the reader with background information. State the topic of your report clearly and concisely (in one or two sentences). Provide background theory, previous research, or formulas the reader should know. Usually, an instructor does not want you to repeat whatever the lab manual says, but to show your understanding of the problem.

Questions an Effective Lab Report Introduction Should Answer

What is the problem.

Describe the problem investigated. Summarize relevant research to provide context, key terms, and concepts so that your reader can understand the experiment.

Why is it important?

Review relevant research to provide a rationale for the investigation. What conflict, unanswered question, untested population, or untried method in existing research does your experiment address? How will you challenge or extend the findings of other researchers?

What solution (or step toward a solution) do you propose?

Briefly describe your experiment : hypothesis , research question , general experimental design or method , and a justification of your method (if alternatives exist).

Tips on Composing Your Lab Report’s Introduction

• Move from the general to the specific – from a problem in research literature to the specifics of your experiment.
• Engage your reader – answer the questions: “What did I do?” “Why should my reader care?”
• Clarify the links between problem and solution, between question asked and research design, and between prior research and the specifics of your experiment.
• Be selective, not exhaustive, in choosing studies to cite and the amount of detail to include. In general, the more relevant an article is to your study, the more space it deserves and the later in the introduction it appears.
• Ask your instructor whether or not you should summarize results and/or conclusions in the Introduction.
• “The objective of the experiment was …”
• “The purpose of this report is …”
• “Bragg’s Law for diffraction is …”
• “The scanning electron microscope produces micrographs …”

Part 2 (of 2): Writing the “Discussion” Section of a Lab Report

The discussion is the most important part of your lab report, because here you show that you have not merely completed the experiment, but that you also understand its wider implications. The discussion section is reserved for putting experimental results in the context of the larger theory. Ask yourself: “What is the significance or meaning of the results?”

Elements of an Effective Discussion Section

What do the results indicate clearly? Based on your results, explain what you know with certainty and draw conclusions.

Interpretation

What is the significance of your results? What ambiguities exist? What are logical explanations for problems in the data? What questions might you raise about the methods used or the validity of the experiment? What can be logically deduced from your analysis?

Tips on the Discussion Section

1. explain your results in terms of theoretical issues..

How well has the theory been illustrated? What are the theoretical implications and practical applications of your results?

For each major result:

• Describe the patterns, principles, and relationships that your results show.
• Explain how your results relate to expectations and to literature cited in your Introduction. Explain any agreements, contradictions, or exceptions.
• Describe what additional research might resolve contradictions or explain exceptions.

2. Relate results to your experimental objective(s).

If you set out to identify an unknown metal by finding its lattice parameter and its atomic structure, be sure that you have identified the metal and its attributes.

3. Compare expected results with those obtained.

If there were differences, how can you account for them? Were the instruments able to measure precisely? Was the sample contaminated? Did calculated values take account of friction?

4. Analyze experimental error along with the strengths and limitations of the experiment’s design.

Were any errors avoidable? Were they the result of equipment?  If the flaws resulted from the experiment design, explain how the design might be improved. Consider, as well, the precision of the instruments that were used.

5. Compare your results to similar investigations.

In some cases, it is legitimate to compare outcomes with classmates, not in order to change your answer, but in order to look for and to account for or analyze any anomalies between the groups. Also, consider comparing your results to published scientific literature on the topic.

The “Introducing a Lab Report” guide was adapted from the University of Toronto Engineering Communications Centre and University of Wisconsin-Madison Writing Center.

The “Writing the Discussion Section of a Lab Report” resource was adapted from the University of Toronto Engineering Communications Centre and University of Wisconsin-Madison Writing Center.

Last revised: 07/2008 | Adapted for web delivery: 02/2021

In order to access certain content on this page, you may need to download Adobe Acrobat Reader or an equivalent PDF viewer software.