how to write a dissertation declaration

• How it works

How To Write An Effective Declaration Page For Your Thesis – Template

Published by Alvin Nicolas at March 13th, 2024 , Revised On April 5, 2024

A declaration page stands as a testament to the integrity and authenticity of a thesis. It is a succinct section at the beginning of the document and outlines key information and affirmations regarding the authorship and originality of the work. 

Essentially, it serves as a formal declaration of the author’s adherence to ethical standards and their acknowledgement of the contributions made towards the completion of the thesis. 

A declaration page acts as a cornerstone of academic integrity and helps reinforce the credibility of the research presented within the thesis or dissertation . 

By explicitly stating that the work is original and free from plagiarism, the author not only upholds the principles of honesty but also demonstrates their commitment to scholarly standards. 

Let’s explore this further. 

What Is A Thesis Declaration Page

The declaration page within a thesis serves as a foundational element, providing essential information and affirmations crucial for academic integrity. 

The declaration page, often positioned at the beginning of a thesis, is a formal section dedicated to asserting the authenticity, originality, and ethical adherence of the work presented within the document. It serves as a declaration of the author’s commitment to scholarly integrity and honesty.

This declaration is typically mandated by academic institutions as a requisite component of thesis submission, aimed at upholding rigorous standards of academic conduct.

Purpose Of A Dissertation Declaration

The primary purpose of the declaration page is twofold: to affirm the originality of the research and to acknowledge the contributions of individuals or sources that have assisted in the thesis’s completion. 

By formally declaring the work’s authenticity and adherence to ethical standards, the author establishes credibility and trustworthiness, essential qualities in academic discourse.

Moreover, the declaration page functions as a transparent record of the author’s involvement in the research process , delineating their contributions and attributions. 

It serves as a testament to the author’s accountability and responsibility for the content presented within the thesis, thus safeguarding against plagiarism and intellectual dishonesty.

Key Components To Include

Here are some of the key components to include in your declaration guide. 

Title Of The Thesis

The declaration page typically begins with the title of the thesis , serving as a concise identifier of the research topic or subject matter. The title should accurately reflect the scope and focus of the thesis, providing readers with a clear understanding of its contents.

Name Of The Author

Following the title, the declaration page includes the name of the author, affirming their authorship and responsibility for the research presented within the thesis.

The author’s name serves as a key identifier, linking them directly to the work and asserting their ownership of intellectual contributions.

Declaration Of Originality

Central to the declaration page is the declaration of originality, wherein the author asserts that the work presented within the thesis is their own original creation.

This declaration typically includes statements affirming that the research has not been plagiarised and that any sources or references utilised have been properly cited.

Statement Of Contributions

The statement of contributions provides an opportunity for the author to acknowledge the individuals or entities that have contributed to the completion of the thesis. This may include supervisors , advisors, collaborators, or funding agencies, among others. 

The statement should clearly delineate the specific contributions made by each party, highlighting their roles in the research process.

Acknowledgements (If Applicable)

In some cases, the declaration page may include a section for acknowledgements, wherein the author expresses gratitude to individuals or organisations who have provided support, guidance, or inspiration during the course of the research. 

Acknowledgements may include mentors, peers, family members, or institutions that have facilitated the author’s academic pursuits.

Date Of Submission

Finally, the declaration page concludes with the date of submission, indicating the date on which the thesis was formally submitted for evaluation or examination. 

The inclusion of the submission date serves as a record of the thesis’s completion and submission timeline, ensuring compliance with academic deadlines and requirements.

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

• Expert UK Writers
• Plagiarism-free
• Timely Delivery
• Thorough Research
• Rigorous Quality Control

How To Write A Declaration Page

Creating a declaration page that is both impactful and professional requires attention to detail and adherence to certain principles. 

Clear & Concise Language

One of the cardinal rules of crafting an effective declaration page is to use clear and concise language. Avoid ambiguity or verbosity, and strive for clarity in expressing your affirmations and acknowledgements. 

The declaration should be easily understandable to readers, conveying your commitment to academic integrity without unnecessary embellishment.

Formatting & Presentation Tips

Formatting plays a crucial role in the presentation of the declaration page. Ensure that the page layout is clean and organised, with consistent font styles and sizes. 

Use headings and subheadings to delineate different sections of the declaration, making it easier for readers to navigate. Additionally, pay attention to spacing and alignment to maintain a polished appearance.

Honesty & Integrity

Honesty and integrity are paramount when crafting a declaration page. It is essential to uphold the highest ethical standards and truthfully affirm the originality of your work. 

Avoid any misleading statements or exaggerations, as they can undermine the credibility of your thesis. Demonstrating integrity in your declaration not only reflects positively on your character but also reinforces the trustworthiness of your research.

Institutional Guidelines & Requirements

Every academic institution may have its own specific guidelines and requirements for declaration pages. Before crafting your declaration, familiarise yourself with these guidelines to ensure compliance. 

Pay attention to formatting specifications, word limits, and any specific language or statements that may be required. Adhering to institutional guidelines demonstrates your attention to detail and respect for academic conventions.

Writing The Declaration Of Originality

The declaration of originality is a crucial component of the declaration page, affirming the authenticity and uniqueness of your work. 

What Constitutes Original Work

Original work refers to content that is created by the author and has not been previously published or plagiarised from other sources. When writing the declaration of originality, it is important to understand what constitutes original work within the context of your field of study. 

This may include original research findings, innovative ideas, or creative interpretations of existing knowledge.

Avoiding Plagiarism

Plagiarism is a serious offence in academia and must be strictly avoided. When writing the declaration of originality, explicitly state that the work presented in your thesis is your own and properly acknowledge any sources or references used. 

Take care to cite all sources accurately and follow citation conventions prescribed by your institution. By demonstrating a commitment to academic honesty, you uphold the integrity of your research.

Declaration Template

I, [Your Name], hereby declare that this thesis entitled “[Title of Your Thesis]” is my own work and that, to the best of my knowledge and belief, it contains no material previously published or written by another person nor material which to a substantial extent has been accepted for the award of any other degree or diploma at any university or equivalent institution.

I also declare that the intellectual content of this thesis is the product of my own work, except to the extent that assistance from others in the project’s design and conception or in style, presentation, and linguistic expression is acknowledged. Where applicable, any part of this thesis containing materials prepared jointly with others has been explicitly identified.

Any views expressed in this thesis are those of the author and do not necessarily reflect the views of [University Name] or any other institution.

Signed: ____________________

Date: [Date]

Frequently Asked Questions

What is an example of a declaration in a thesis.

An example of a declaration in a thesis might state: “I hereby declare that this thesis is my original work, conducted under the supervision of [supervisor’s name], and all sources used have been properly cited and acknowledged.”

Where does the declaration go in a thesis?

The declaration typically appears as a preliminary page in a thesis, preceding the abstract and acknowledgements. It is usually located after the title page and before the table of contents, providing a formal statement from the author regarding the originality and integrity of their work.

What is an example of a declaration statement?

An example of a declaration statement in a thesis could be: “I solemnly declare that this thesis is the result of my own research endeavours, conducted under the guidance of [supervisor’s name]. All sources used have been duly acknowledged and referenced according to the conventions of academic integrity and citation.”

What is the declaration format for Phd thesis?

The declaration format for a PhD thesis typically includes a statement asserting the author’s originality of work, acknowledgement of sources, compliance with ethical standards, and declaration of any assistance received. It’s usually structured in a formal, concise manner and is placed at the beginning of the thesis document.

You May Also Like

Dissertation conclusion is perhaps the most underrated part of a dissertation or thesis paper. Learn how to write a dissertation conclusion.

A literature review is a survey of theses, articles, books and other academic sources. Here are guidelines on how to write dissertation literature review.

Do dissertations scare you? Struggling with writing a flawless dissertation? Well, congratulations, you have landed in the perfect place. In this blog, we will take you through the detailed process of writing a dissertation. Sounds fun? We thought so!

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

5+ Examples Of Declaration For Thesis or Research Paper

The declaration is one of the essential parts of your thesis, which means you should make the declaration just as good as the rest of your thesis! In this article, We will give you five examples of declarations, and we will tell you how you can write your declaration. This way, you will have an easier time writing your declaration, and it should be ready in no time! Let’s get started!

What is Thesis Declaration?

The thesis declaration is a statement that summarizes the main research question, objectives, and scope of your paper. It should be written at the beginning of your paper and be in the form of a thesis statement. The thesis statement can be used to organize your paper’s content into a logical order.

What to include in Declaration For Thesis?

It is only a tiny part of the essay. Still, it has a significant impact on how well it is received by the reader and what kind of impression they take away from it.

1. Straightaway in the start, you can state that you are an avid reader and writer

2. You can also include your hobbies and interests

3. The declaration may also include your dedication to the work.

4. Your declaration should be about yourself, not your parents, siblings, or any other family member.

5. The declaration should be on your behalf, and you are not doing this on someone else’s behalf, so it is essential to mention that too.

How To Write Declaration In Thesis?

The declaration should be written carefully following the guidelines provided.

1. Know the purpose of a declaration

2. Follow the university guidelines

3. Write all required data

4. Make sure you are consistent

5. Pay attention to formatting

Examples Of Declaration For Thesis

1. research proposal declaration sample.

In the field of [subject], I believe that [research topic] is an important and valuable area of research and that my proposed project will help to advance the field. In particular, I plan to use [research method] to investigate how [subtopic] is related to [subtopic].

I will conduct this study following standard ethical guidelines outlined in Part C of the American Psychological Association’s Ethical Principles of Psychologists and Code of Conduct (2002).

2. Master Thesis Declaration Example

This thesis is submitted in partial fulfillment of the requirements for the degree of Master of Science in Computer Science.

I declare that this work has been completed according to the guidelines established by the faculty and has not been submitted for any other purpose.

This thesis is copyrighted by its author, [name]. It may be used or reproduced for educational purposes only, given proper credit to its author.

3. Author Declaration Sample

I, the undersigned, declare that the work I have produced is original, and all rights to it belong to me.

I understand this declaration must be signed before an official notary or other person authorized by law to make such a declaration.

4. Ph.D. Thesis Declaration Sample

I, [name], as a result of this, declare that the information in this document is true and correct. I believe it contains no material I would not want to include in my research publication. Furthermore, I acknowledge that this work was conducted under the supervision of Dr. [name].

5. Sample Declaration For Project Report

This report is written to provide a concise summary of the project. It provides an overview of the project goals, objectives, and results. The report also describes the project context, including its historical origins and current status. Finally, it describes the research methodology used to accomplish the objectives of this project and makes recommendations for future research.

Conclusion: Declaration For Thesis

Your thesis declaration should state the purpose and scope of your research, what is being tested, the variables, and the hypothesis. A strong thesis statement will guide you in the rest of your research. You need to understand your hypothesis and make sure it is testable.

Please contact us anytime if you have any questions about the thesis statement. Thank you for reading. We hope this information can come in handy for your following research paper!

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

How To Write A Dissertation Or Thesis

8 straightforward steps to craft an a-grade dissertation.

By: Derek Jansen (MBA) Expert Reviewed By: Dr Eunice Rautenbach | June 2020

Writing a dissertation or thesis is not a simple task. It takes time, energy and a lot of will power to get you across the finish line. It’s not easy – but it doesn’t necessarily need to be a painful process. If you understand the big-picture process of how to write a dissertation or thesis, your research journey will be a lot smoother.  

In this post, I’m going to outline the big-picture process of how to write a high-quality dissertation or thesis, without losing your mind along the way. If you’re just starting your research, this post is perfect for you. Alternatively, if you’ve already submitted your proposal, this article which covers how to structure a dissertation might be more helpful.

How To Write A Dissertation: 8 Steps

• Clearly understand what a dissertation (or thesis) is
• Find a unique and valuable research topic
• Craft a convincing research proposal
• Write up a strong introduction chapter
• Review the existing literature and compile a literature review
• Design a rigorous research strategy and undertake your own research
• Present the findings of your research
• Draw a conclusion and discuss the implications

Step 1: Understand exactly what a dissertation is

This probably sounds like a no-brainer, but all too often, students come to us for help with their research and the underlying issue is that they don’t fully understand what a dissertation (or thesis) actually is.

So, what is a dissertation?

At its simplest, a dissertation or thesis is a formal piece of research , reflecting the standard research process . But what is the standard research process, you ask? The research process involves 4 key steps:

• Ask a very specific, well-articulated question (s) (your research topic)
• See what other researchers have said about it (if they’ve already answered it)
• If they haven’t answered it adequately, undertake your own data collection and analysis in a scientifically rigorous fashion
• Answer your original question(s), based on your analysis findings

In short, the research process is simply about asking and answering questions in a systematic fashion . This probably sounds pretty obvious, but people often think they’ve done “research”, when in fact what they have done is:

• Started with a vague, poorly articulated question
• Not taken the time to see what research has already been done regarding the question
• Collected data and opinions that support their gut and undertaken a flimsy analysis
• Drawn a shaky conclusion, based on that analysis

If you want to see the perfect example of this in action, look out for the next Facebook post where someone claims they’ve done “research”… All too often, people consider reading a few blog posts to constitute research. Its no surprise then that what they end up with is an opinion piece, not research. Okay, okay – I’ll climb off my soapbox now.

The key takeaway here is that a dissertation (or thesis) is a formal piece of research, reflecting the research process. It’s not an opinion piece , nor a place to push your agenda or try to convince someone of your position. Writing a good dissertation involves asking a question and taking a systematic, rigorous approach to answering it.

If you understand this and are comfortable leaving your opinions or preconceived ideas at the door, you’re already off to a good start!

Step 2: Find a unique, valuable research topic

As we saw, the first step of the research process is to ask a specific, well-articulated question. In other words, you need to find a research topic that asks a specific question or set of questions (these are called research questions ). Sounds easy enough, right? All you’ve got to do is identify a question or two and you’ve got a winning research topic. Well, not quite…

A good dissertation or thesis topic has a few important attributes. Specifically, a solid research topic should be:

Let’s take a closer look at these:

Attribute #1: Clear

Your research topic needs to be crystal clear about what you’re planning to research, what you want to know, and within what context. There shouldn’t be any ambiguity or vagueness about what you’ll research.

Here’s an example of a clearly articulated research topic:

An analysis of consumer-based factors influencing organisational trust in British low-cost online equity brokerage firms.

As you can see in the example, its crystal clear what will be analysed (factors impacting organisational trust), amongst who (consumers) and in what context (British low-cost equity brokerage firms, based online).

Need a helping hand?

Attribute #2:   Unique

Your research should be asking a question(s) that hasn’t been asked before, or that hasn’t been asked in a specific context (for example, in a specific country or industry).

For example, sticking organisational trust topic above, it’s quite likely that organisational trust factors in the UK have been investigated before, but the context (online low-cost equity brokerages) could make this research unique. Therefore, the context makes this research original.

One caveat when using context as the basis for originality – you need to have a good reason to suspect that your findings in this context might be different from the existing research – otherwise, there’s no reason to warrant researching it.

Attribute #3: Important

Simply asking a unique or original question is not enough – the question needs to create value. In other words, successfully answering your research questions should provide some value to the field of research or the industry. You can’t research something just to satisfy your curiosity. It needs to make some form of contribution either to research or industry.

For example, researching the factors influencing consumer trust would create value by enabling businesses to tailor their operations and marketing to leverage factors that promote trust. In other words, it would have a clear benefit to industry.

So, how do you go about finding a unique and valuable research topic? We explain that in detail in this video post – How To Find A Research Topic . Yeah, we’ve got you covered 😊

Step 3: Write a convincing research proposal

Once you’ve pinned down a high-quality research topic, the next step is to convince your university to let you research it. No matter how awesome you think your topic is, it still needs to get the rubber stamp before you can move forward with your research. The research proposal is the tool you’ll use for this job.

So, what’s in a research proposal?

The main “job” of a research proposal is to convince your university, advisor or committee that your research topic is worthy of approval. But convince them of what? Well, this varies from university to university, but generally, they want to see that:

• You have a clearly articulated, unique and important topic (this might sound familiar…)
• You’ve done some initial reading of the existing literature relevant to your topic (i.e. a literature review)
• You have a provisional plan in terms of how you will collect data and analyse it (i.e. a methodology)

At the proposal stage, it’s (generally) not expected that you’ve extensively reviewed the existing literature , but you will need to show that you’ve done enough reading to identify a clear gap for original (unique) research. Similarly, they generally don’t expect that you have a rock-solid research methodology mapped out, but you should have an idea of whether you’ll be undertaking qualitative or quantitative analysis , and how you’ll collect your data (we’ll discuss this in more detail later).

Long story short – don’t stress about having every detail of your research meticulously thought out at the proposal stage – this will develop as you progress through your research. However, you do need to show that you’ve “done your homework” and that your research is worthy of approval .

So, how do you go about crafting a high-quality, convincing proposal? We cover that in detail in this video post – How To Write A Top-Class Research Proposal . We’ve also got a video walkthrough of two proposal examples here .

Step 4: Craft a strong introduction chapter

Once your proposal’s been approved, its time to get writing your actual dissertation or thesis! The good news is that if you put the time into crafting a high-quality proposal, you’ve already got a head start on your first three chapters – introduction, literature review and methodology – as you can use your proposal as the basis for these.

Handy sidenote – our free dissertation & thesis template is a great way to speed up your dissertation writing journey.

What’s the introduction chapter all about?

The purpose of the introduction chapter is to set the scene for your research (dare I say, to introduce it…) so that the reader understands what you’ll be researching and why it’s important. In other words, it covers the same ground as the research proposal in that it justifies your research topic.

What goes into the introduction chapter?

This can vary slightly between universities and degrees, but generally, the introduction chapter will include the following:

• A brief background to the study, explaining the overall area of research
• A problem statement , explaining what the problem is with the current state of research (in other words, where the knowledge gap exists)
• Your research questions – in other words, the specific questions your study will seek to answer (based on the knowledge gap)
• The significance of your study – in other words, why it’s important and how its findings will be useful in the world

As you can see, this all about explaining the “what” and the “why” of your research (as opposed to the “how”). So, your introduction chapter is basically the salesman of your study, “selling” your research to the first-time reader and (hopefully) getting them interested to read more.

How do I write the introduction chapter, you ask? We cover that in detail in this post .

Step 5: Undertake an in-depth literature review

As I mentioned earlier, you’ll need to do some initial review of the literature in Steps 2 and 3 to find your research gap and craft a convincing research proposal – but that’s just scratching the surface. Once you reach the literature review stage of your dissertation or thesis, you need to dig a lot deeper into the existing research and write up a comprehensive literature review chapter.

What’s the literature review all about?

There are two main stages in the literature review process:

Literature Review Step 1: Reading up

The first stage is for you to deep dive into the existing literature (journal articles, textbook chapters, industry reports, etc) to gain an in-depth understanding of the current state of research regarding your topic. While you don’t need to read every single article, you do need to ensure that you cover all literature that is related to your core research questions, and create a comprehensive catalogue of that literature , which you’ll use in the next step.

Reading and digesting all the relevant literature is a time consuming and intellectually demanding process. Many students underestimate just how much work goes into this step, so make sure that you allocate a good amount of time for this when planning out your research. Thankfully, there are ways to fast track the process – be sure to check out this article covering how to read journal articles quickly .

Literature Review Step 2: Writing up

Once you’ve worked through the literature and digested it all, you’ll need to write up your literature review chapter. Many students make the mistake of thinking that the literature review chapter is simply a summary of what other researchers have said. While this is partly true, a literature review is much more than just a summary. To pull off a good literature review chapter, you’ll need to achieve at least 3 things:

• You need to synthesise the existing research , not just summarise it. In other words, you need to show how different pieces of theory fit together, what’s agreed on by researchers, what’s not.
• You need to highlight a research gap that your research is going to fill. In other words, you’ve got to outline the problem so that your research topic can provide a solution.
• You need to use the existing research to inform your methodology and approach to your own research design. For example, you might use questions or Likert scales from previous studies in your your own survey design .

As you can see, a good literature review is more than just a summary of the published research. It’s the foundation on which your own research is built, so it deserves a lot of love and attention. Take the time to craft a comprehensive literature review with a suitable structure .

But, how do I actually write the literature review chapter, you ask? We cover that in detail in this video post .

Step 6: Carry out your own research

Once you’ve completed your literature review and have a sound understanding of the existing research, its time to develop your own research (finally!). You’ll design this research specifically so that you can find the answers to your unique research question.

There are two steps here – designing your research strategy and executing on it:

1 – Design your research strategy

The first step is to design your research strategy and craft a methodology chapter . I won’t get into the technicalities of the methodology chapter here, but in simple terms, this chapter is about explaining the “how” of your research. If you recall, the introduction and literature review chapters discussed the “what” and the “why”, so it makes sense that the next point to cover is the “how” –that’s what the methodology chapter is all about.

In this section, you’ll need to make firm decisions about your research design. This includes things like:

• Your research philosophy (e.g. positivism or interpretivism )
• Your overall methodology (e.g. qualitative , quantitative or mixed methods)
• Your data collection strategy (e.g. interviews , focus groups, surveys)
• Your data analysis strategy (e.g. content analysis , correlation analysis, regression)

If these words have got your head spinning, don’t worry! We’ll explain these in plain language in other posts. It’s not essential that you understand the intricacies of research design (yet!). The key takeaway here is that you’ll need to make decisions about how you’ll design your own research, and you’ll need to describe (and justify) your decisions in your methodology chapter.

2 – Execute: Collect and analyse your data

Once you’ve worked out your research design, you’ll put it into action and start collecting your data. This might mean undertaking interviews, hosting an online survey or any other data collection method. Data collection can take quite a bit of time (especially if you host in-person interviews), so be sure to factor sufficient time into your project plan for this. Oftentimes, things don’t go 100% to plan (for example, you don’t get as many survey responses as you hoped for), so bake a little extra time into your budget here.

Once you’ve collected your data, you’ll need to do some data preparation before you can sink your teeth into the analysis. For example:

• If you carry out interviews or focus groups, you’ll need to transcribe your audio data to text (i.e. a Word document).
• If you collect quantitative survey data, you’ll need to clean up your data and get it into the right format for whichever analysis software you use (for example, SPSS, R or STATA).

Once you’ve completed your data prep, you’ll undertake your analysis, using the techniques that you described in your methodology. Depending on what you find in your analysis, you might also do some additional forms of analysis that you hadn’t planned for. For example, you might see something in the data that raises new questions or that requires clarification with further analysis.

The type(s) of analysis that you’ll use depend entirely on the nature of your research and your research questions. For example:

• If your research if exploratory in nature, you’ll often use qualitative analysis techniques .
• If your research is confirmatory in nature, you’ll often use quantitative analysis techniques
• If your research involves a mix of both, you might use a mixed methods approach

Again, if these words have got your head spinning, don’t worry! We’ll explain these concepts and techniques in other posts. The key takeaway is simply that there’s no “one size fits all” for research design and methodology – it all depends on your topic, your research questions and your data. So, don’t be surprised if your study colleagues take a completely different approach to yours.

Step 7: Present your findings

Once you’ve completed your analysis, it’s time to present your findings (finally!). In a dissertation or thesis, you’ll typically present your findings in two chapters – the results chapter and the discussion chapter .

What’s the difference between the results chapter and the discussion chapter?

While these two chapters are similar, the results chapter generally just presents the processed data neatly and clearly without interpretation, while the discussion chapter explains the story the data are telling  – in other words, it provides your interpretation of the results.

For example, if you were researching the factors that influence consumer trust, you might have used a quantitative approach to identify the relationship between potential factors (e.g. perceived integrity and competence of the organisation) and consumer trust. In this case:

• Your results chapter would just present the results of the statistical tests. For example, correlation results or differences between groups. In other words, the processed numbers.
• Your discussion chapter would explain what the numbers mean in relation to your research question(s). For example, Factor 1 has a weak relationship with consumer trust, while Factor 2 has a strong relationship.

Depending on the university and degree, these two chapters (results and discussion) are sometimes merged into one , so be sure to check with your institution what their preference is. Regardless of the chapter structure, this section is about presenting the findings of your research in a clear, easy to understand fashion.

Importantly, your discussion here needs to link back to your research questions (which you outlined in the introduction or literature review chapter). In other words, it needs to answer the key questions you asked (or at least attempt to answer them).

For example, if we look at the sample research topic:

In this case, the discussion section would clearly outline which factors seem to have a noteworthy influence on organisational trust. By doing so, they are answering the overarching question and fulfilling the purpose of the research .

For more information about the results chapter , check out this post for qualitative studies and this post for quantitative studies .

Step 8: The Final Step Draw a conclusion and discuss the implications

Last but not least, you’ll need to wrap up your research with the conclusion chapter . In this chapter, you’ll bring your research full circle by highlighting the key findings of your study and explaining what the implications of these findings are.

What exactly are key findings? The key findings are those findings which directly relate to your original research questions and overall research objectives (which you discussed in your introduction chapter). The implications, on the other hand, explain what your findings mean for industry, or for research in your area.

Sticking with the consumer trust topic example, the conclusion might look something like this:

Key findings

This study set out to identify which factors influence consumer-based trust in British low-cost online equity brokerage firms. The results suggest that the following factors have a large impact on consumer trust:

While the following factors have a very limited impact on consumer trust:

Notably, within the 25-30 age groups, Factors E had a noticeably larger impact, which may be explained by…

Implications

The findings having noteworthy implications for British low-cost online equity brokers. Specifically:

The large impact of Factors X and Y implies that brokers need to consider….

The limited impact of Factor E implies that brokers need to…

As you can see, the conclusion chapter is basically explaining the “what” (what your study found) and the “so what?” (what the findings mean for the industry or research). This brings the study full circle and closes off the document.

Let’s recap – how to write a dissertation or thesis

You’re still with me? Impressive! I know that this post was a long one, but hopefully you’ve learnt a thing or two about how to write a dissertation or thesis, and are now better equipped to start your own research.

To recap, the 8 steps to writing a quality dissertation (or thesis) are as follows:

• Understand what a dissertation (or thesis) is – a research project that follows the research process.
• Find a unique (original) and important research topic
• Craft a convincing dissertation or thesis research proposal
• Write a clear, compelling introduction chapter
• Undertake a thorough review of the existing research and write up a literature review
• Undertake your own research
• Present and interpret your findings

Once you’ve wrapped up the core chapters, all that’s typically left is the abstract , reference list and appendices. As always, be sure to check with your university if they have any additional requirements in terms of structure or content.  

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

20 Comments

thankfull >>>this is very useful

Thank you, it was really helpful

unquestionably, this amazing simplified way of teaching. Really , I couldn’t find in the literature words that fully explicit my great thanks to you. However, I could only say thanks a-lot.

Great to hear that – thanks for the feedback. Good luck writing your dissertation/thesis.

This is the most comprehensive explanation of how to write a dissertation. Many thanks for sharing it free of charge.

Very rich presentation. Thank you

Thanks Derek Jansen|GRADCOACH, I find it very useful guide to arrange my activities and proceed to research!

Thank you so much for such a marvelous teaching .I am so convinced that am going to write a comprehensive and a distinct masters dissertation

It is an amazing comprehensive explanation

This was straightforward. Thank you!

I can say that your explanations are simple and enlightening – understanding what you have done here is easy for me. Could you write more about the different types of research methods specific to the three methodologies: quan, qual and MM. I look forward to interacting with this website more in the future.

Thanks for the feedback and suggestions 🙂

Hello, your write ups is quite educative. However, l have challenges in going about my research questions which is below; *Building the enablers of organisational growth through effective governance and purposeful leadership.*

Very educating.

Just listening to the name of the dissertation makes the student nervous. As writing a top-quality dissertation is a difficult task as it is a lengthy topic, requires a lot of research and understanding and is usually around 10,000 to 15000 words. Sometimes due to studies, unbalanced workload or lack of research and writing skill students look for dissertation submission from professional writers.

Thank you 💕😊 very much. I was confused but your comprehensive explanation has cleared my doubts of ever presenting a good thesis. Thank you.

thank you so much, that was so useful

Hi. Where is the excel spread sheet ark?

could you please help me look at your thesis paper to enable me to do the portion that has to do with the specification

my topic is “the impact of domestic revenue mobilization.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Format, bind and submit your thesis: general guidance

You no longer need to submit a physical copy of your thesis. Please refer directly to the “Submit Your Thesis” section below.

This information is for research students submitting a thesis for assessment. It tells you how to:

• format your thesis
• submit your thesis
• bind your thesis 
• submit the final copy of your thesis

There are different requirements for students of fine arts, design, architecture or town planning.

Find out more about these requirements

Format your thesis

UCL theses should be submitted in a specific format, this applies to both the viva and final copies of your thesis. 

View the thesis checklist

Presentation

In the electronic version of your thesis, hyperlinks (including DOIs) should be functional and resolve to the correct webpage.

We would recommend using Arial or Helvetica fonts, at a size of no less than 12.

Find out more about the accessibility guidelines

If printed, please present your thesis in a permanent and legible format.

Illustrations should be permanently mounted on A4 size paper and bound in with the thesis; you may not use sellotape or similar materials.

A4 size paper (210 x 297 mm) should be used. Plain white paper must be used, of good quality and of sufficient opacity for normal reading. Both sides of the paper may be used.

Both sides of the paper may be used.

Margins at the binding edge must not be less than 40 mm (1.5 inches) and other margins not less than 20 mm (.75 inches). Double or one-and-a-half spacing should be used in typescripts, except for indented quotations or footnotes where single spacing may be used.

All pages must be numbered in one continuous sequence, i.e. from the title page of the first volume to the last page of type, in Arabic numerals from 1 onwards. This sequence must include everything bound in the volume, including maps, diagrams, blank pages, etc. Any material which cannot be bound in with the text must be placed in a pocket inside or attached to the back cover or in a rigid container similar in format to the bound thesis (see Illustrative material ).

The title page must bear the following:

• the officially-approved title of the thesis
• the candidates full name as registered
• the institution name 'UCL'
• the degree for which the thesis is submitted

The title page should be followed by a signed declaration that the work presented in the thesis is the candidate’s own e.g.

‘I, [full name] confirm that the work presented in this thesis is my own. Where information has been derived from other sources, I confirm that this has been indicated in the thesis.'

Please see the section below entitled ‘Inclusion of published works in doctoral theses’ for more information about how to indicate when you have re-used material that you have previously published.

The signed declaration should be followed by an abstract consisting of no more than 300 words.

Impact Statement

The abstract should be followed by an impact statement consisting of no more than 500 words. For further information on the content of the Impact Statement, please see the Impact Statement Guidance Notes for Research Students and Supervisors on the Doctoral School's website. 

Find out more about the Impact Statement

Inclusion of published works in doctoral theses

If you have included any work in your thesis that you have published (e.g. in a journal) previously, then you will need to insert a completed copy of the UCL Research Paper Declaration Form into your thesis after the Impact Statement. The form, and information about how to complete it is available on the Doctoral School’s website.

Find out more about the UCL Research Paper Declaration Form

Table of contents

In each copy of the thesis the abstract should be followed by a full table of contents (including any material not bound in) and a list of tables, photographs and any other materials. It is good practice to use bookmarking within the PDF of the thesis in electronic form to allow readers to jump to the relevant section, figure, table etc. from the table of contents.

Illustrative material

Illustrative material may be submitted on a CD-ROM. If you wish to submit material in any other form, your supervisor must contact Research Degrees well in advance of submission of the thesis.

Any material which cannot be bound in with the text must be placed either in a pocket inside or attached to the back cover or in a rigid container similar in format to the bound thesis. If it is separate from the bound volume it must be clearly labelled with the same information as on the title page. Each copy of the thesis submitted must be accompanied by a full set of this material.

Submit your thesis

Viva copies.

You must submit an electronic version of your thesis to via the UCL OneDrive . You no longer need to submit a printed copy unless your examiners ask for this. 

Find out more on how to submit via the UCL OneDrive

We will check your status and if your examiners have been appointed we will forward the thesis directly to them. They will then be able to download the copy of your thesis to prepare for your exam. 

If an external examiner requests a hard copy of the thesis you will need to arrange for this to be printed and submitted to the Student Enquiries Centre during their walk-in operational hours. We will collect your thesis and post it on to the examiners. 

If your examiners have not been appointed, your thesis will be held securely until your examiners have been formally appointed by UCL.

Covid-19 Impact Form

We have developed a form for you to submit with your thesis if you wish to declare an impact on your research.   The form is optional and your choice to complete it or not will have no bearing on the outcome of your examination. It is intended to set the context of examination and is not a plea for leniency. Your examiners will continue to apply the standard criteria as set out in UCL’s Academic Manual and the joint examiners’ form. Please see the publication from the QAA on Advice on Doctoral Standards for Research Students and Supervisors for further support.

You must submit this form as a separate Word document or PDF when you submit your thesis via the UCL Dropbox as detailed in our guidance above.   We will only accept the form if you submit it at the same time that you submit your thesis.  This will apply if you are making an initial submission or a resubmission.

Download the Covid-19 Impact Form

Find out more about the Student Enquiries Centre

Your examination entry form must be received and logged by Research Degrees before you submit your thesis.

Find out more about examination entry

Re-submission

If you need to re-submit you must:

• submit a new examination entry form to the Research Degrees office at least 4 weeks prior to the expected submission of the thesis
• you must submit an electronic version of your thesis to via the UCL OneDrive . You no longer need to submit a printed copy unless your examiners ask for this.  Find out more on how to submit via the UCL OneDrive

We will check your status and confirm that your examiners are willing to review your revised thesis. We will then forward the thesis directly to them. They will be able to download the copy of your thesis for assessment. 

If an external examiner requests a hard copy of the thesis you will need to arrange for this to be printed and submitted to the Student Enquiries Centre during their walk-in operational hours. We will collect your thesis and post it on to the examiners.

Submitting as a Non-Registered Student

If you do not submit your thesis by the end of your period of Completing Research Status, your registration as a student will end at that point. Your supervisor will then need to apply for permission for you to submit your thesis in writing to the Research Degrees section, at least 3 weeks before your expected submission date. You will be charged a submission extension fee at the point you submit your thesis.

Bind your thesis

If your examiners have request a printed copy of your thesis, please read the following guidance:

Theses have to be robust enough to withstand the examination process and be easily identified. They will need to have your name on the spine to distinguish them.

All theses (whether soft or hard-bound) must:

• be covered in medium blue cloth (e.g. water resistant material) 
• be lettered in gold up the spine with degree, year, name and initials in the same form as UCL records, with letters 16 or 18 point (.25 inch) - thesis submitted for examination in November and December should have the following year lettered on the spine
• have no lettering on front cover of thesis
• have the spine text inverted if the front cover is facing up

An example of how your thesis should be presented.

Hard-bound theses must have the pages sown in (not punched) and soft-bound theses should have the pages glued in. Theses submitted in any other form of binding, including ring binding, will not be accepted.

You are responsible for making sure that your thesis is correctly bound by the company you select.

Final copies

UCL no longer requires a printed copy of your final thesis and we will award your degree once you have met the academic conditions and the Library have confirmed receipt of your e-thesis, the Deposit Agreement form, and you have cleared any outstanding fees.

You will need to deposit an electronic copy of your final thesis (and a completed E-Thesis Deposit Agreement form) via UCL's Research Publications Service (RPS). Please ensure that you remove, or blank out, all personal identifiers such as signatures, addresses and telephone numbers from the e-thesis. Any photographs that you have taken should not show identifiable individuals without their permission and any you have taken of children should mask their faces.

If you do wish to deposit a hard copy you can do so by sending it directly to the Cataloguing & Metadata department of Library Services by post, or in person at the Main Library help desk.  You will find more information about the process on the existing webpage for e-thesis submission. 

Find out more about depositing an electronic and printed copy of your thesis

Related content

• Research degrees: examination entry
• Format, bind and submit your thesis: fine art, design, architecture and town planning
• Viva examinations: guidance

Important Information:

The UCL Student Centre has now moved.  Details of their new location can be found here.  

• Formatting Your Dissertation
• Introduction

Harvard Griffin GSAS strives to provide students with timely, accurate, and clear information. If you need help understanding a specific policy, please contact the office that administers that policy.

• Application for Degree
• Credit for Completed Graduate Work
• Ad Hoc Degree Programs
• Acknowledging the Work of Others
• Advanced Planning
• Dissertation Advisory Committee
• Dissertation Submission Checklist
• Publishing Options
• Submitting Your Dissertation
• English Language Proficiency
• PhD Program Requirements
• Secondary Fields
• Year of Graduate Study (G-Year)
• Master's Degrees
• Grade and Examination Requirements
• Conduct and Safety
• Financial Aid
• Non-Resident Students
• Registration

On this page:

Language of the Dissertation

Page and text requirements, body of text, tables, figures, and captions, dissertation acceptance certificate, copyright statement.

• Table of Contents

Front and Back Matter

Supplemental material, dissertations comprising previously published works, top ten formatting errors, further questions.

• Related Contacts and Forms

When preparing the dissertation for submission, students must follow strict formatting requirements. Any deviation from these requirements may lead to rejection of the dissertation and delay in the conferral of the degree.

The language of the dissertation is ordinarily English, although some departments whose subject matter involves foreign languages may accept a dissertation written in a language other than English.

Most dissertations are 100 to 300 pages in length. All dissertations should be divided into appropriate sections, and long dissertations may need chapters, main divisions, and subdivisions.

• 8½ x 11 inches, unless a musical score is included
• At least 1 inch for all margins
• Body of text: double spacing
• Block quotations, footnotes, and bibliographies: single spacing within each entry but double spacing between each entry
• Table of contents, list of tables, list of figures or illustrations, and lengthy tables: single spacing may be used

Fonts and Point Size

Use 10-12 point size. Fonts must be embedded in the PDF file to ensure all characters display correctly. 

Recommended Fonts

If you are unsure whether your chosen font will display correctly, use one of the following fonts: 

If fonts are not embedded, non-English characters may not appear as intended. Fonts embedded improperly will be published to DASH as-is. It is the student’s responsibility to make sure that fonts are embedded properly prior to submission. 

Instructions for Embedding Fonts

To embed your fonts in recent versions of Word, follow these instructions from Microsoft:

• Click the File tab and then click Options .
• In the left column, select the Save tab.
• Clear the Do not embed common system fonts check box.

For reference, below are some instructions from ProQuest UMI for embedding fonts in older file formats:

To embed your fonts in Microsoft Word 2010:

• In the File pull-down menu click on Options .
• Choose Save on the left sidebar.
• Check the box next to Embed fonts in the file.
• Click the OK button.
• Save the document.

Note that when saving as a PDF, make sure to go to “more options” and save as “PDF/A compliant”

To embed your fonts in Microsoft Word 2007:

• Click the circular Office button in the upper left corner of Microsoft Word.
• A new window will display. In the bottom right corner select Word Options . 
• Choose Save from the left sidebar.

Using Microsoft Word on a Mac:

Microsoft Word 2008 on a Mac OS X computer will automatically embed your fonts while converting your document to a PDF file.

If you are converting to PDF using Acrobat Professional (instructions courtesy of the Graduate Thesis Office at Iowa State University):  

• Open your document in Microsoft Word. 
• Click on the Adobe PDF tab at the top. Select "Change Conversion Settings." 
• Click on Advanced Settings. 
• Click on the Fonts folder on the left side of the new window. In the lower box on the right, delete any fonts that appear in the "Never Embed" box. Then click "OK." 
• If prompted to save these new settings, save them as "Embed all fonts." 
• Now the Change Conversion Settings window should show "embed all fonts" in the Conversion Settings drop-down list and it should be selected. Click "OK" again. 
• Click on the Adobe PDF link at the top again. This time select Convert to Adobe PDF. Depending on the size of your document and the speed of your computer, this process can take 1-15 minutes. 
• After your document is converted, select the "File" tab at the top of the page. Then select "Document Properties." 
• Click on the "Fonts" tab. Carefully check all of your fonts. They should all show "(Embedded Subset)" after the font name. 
•  If you see "(Embedded Subset)" after all fonts, you have succeeded.

The font used in the body of the text must also be used in headers, page numbers, and footnotes. Exceptions are made only for tables and figures created with different software and inserted into the document.

Tables and figures must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a table or a figure is alone on a page (with no narrative), it should be centered within the margins on the page. Tables may take up more than one page as long as they obey all rules about margins. Tables and figures referred to in the text may not be placed at the end of the chapter or at the end of the dissertation.

• Given the standards of the discipline, dissertations in the Department of History of Art and Architecture and the Department of Architecture, Landscape Architecture, and Urban Planning often place illustrations at the end of the dissertation.

Figure and table numbering must be continuous throughout the dissertation or by chapter (e.g., 1.1, 1.2, 2.1, 2.2, etc.). Two figures or tables cannot be designated with the same number. If you have repeating images that you need to cite more than once, label them with their number and A, B, etc. 

Headings should be placed at the top of tables. While no specific rules for the format of table headings and figure captions are required, a consistent format must be used throughout the dissertation (contact your department for style manuals appropriate to the field).

Captions should appear at the bottom of any figures. If the figure takes up the entire page, the caption should be placed alone on the preceding page, centered vertically and horizontally within the margins.

Each page receives a separate page number. When a figure or table title is on a preceding page, the second and subsequent pages of the figure or table should say, for example, “Figure 5 (Continued).” In such an instance, the list of figures or tables will list the page number containing the title. The word “figure” should be written in full (not abbreviated), and the “F” should be capitalized (e.g., Figure 5). In instances where the caption continues on a second page, the “(Continued)” notation should appear on the second and any subsequent page. The figure/table and the caption are viewed as one entity and the numbering should show correlation between all pages. Each page must include a header.

Landscape orientation figures and tables must be positioned correctly and bound at the top so that the top of the figure or table will be at the left margin. Figure and table headings/captions are placed with the same orientation as the figure or table when on the same page. When on a separate page, headings/captions are always placed in portrait orientation, regardless of the orientation of the figure or table. Page numbers are always placed as if the figure were vertical on the page.

If a graphic artist does the figures, Harvard Griffin GSAS will accept lettering done by the artist only within the figure. Figures done with software are acceptable if the figures are clear and legible. Legends and titles done by the same process as the figures will be accepted if they too are clear, legible, and run at least 10 or 12 characters per inch. Otherwise, legends and captions should be printed with the same font used in the text.

Original illustrations, photographs, and fine arts prints may be scanned and included, centered between the margins on a page with no text above or below.

Use of Third-Party Content

In addition to the student's own writing, dissertations often contain third-party content or in-copyright content owned by parties other than you, the student who authored the dissertation. The Office for Scholarly Communication recommends consulting the information below about fair use, which allows individuals to use in-copyright content, on a limited basis and for specific purposes, without seeking permission from copyright holders.

Because your dissertation will be made available for online distribution through DASH , Harvard's open-access repository, it is important that any third-party content in it may be made available in this way.

Fair Use and Copyright 

What is fair use?

Fair use is a provision in copyright law that allows the use of a certain amount of copyrighted material without seeking permission. Fair use is format- and media-agnostic. This means fair use may apply to images (including photographs, illustrations, and paintings), quoting at length from literature, videos, and music regardless of the format. 

How do I determine whether my use of an image or other third-party content in my dissertation is fair use?  

There are four factors you will need to consider when making a fair use claim.

1) For what purpose is your work going to be used?

• Nonprofit, educational, scholarly, or research use favors fair use. Commercial, non-educational uses, often do not favor fair use.
• A transformative use (repurposing or recontextualizing the in-copyright material) favors fair use. Examining, analyzing, and explicating the material in a meaningful way, so as to enhance a reader's understanding, strengthens your fair use argument. In other words, can you make the point in the thesis without using, for instance, an in-copyright image? Is that image necessary to your dissertation? If not, perhaps, for copyright reasons, you should not include the image.  

2) What is the nature of the work to be used?

• Published, fact-based content favors fair use and includes scholarly analysis in published academic venues. 
• Creative works, including artistic images, are afforded more protection under copyright, and depending on your use in light of the other factors, may be less likely to favor fair use; however, this does not preclude considerations of fair use for creative content altogether.

3) How much of the work is going to be used?  

• Small, or less significant, amounts favor fair use. A good rule of thumb is to use only as much of the in-copyright content as necessary to serve your purpose. Can you use a thumbnail rather than a full-resolution image? Can you use a black-and-white photo instead of color? Can you quote select passages instead of including several pages of the content? These simple changes bolster your fair use of the material.

4) What potential effect on the market for that work may your use have?

• If there is a market for licensing this exact use or type of educational material, then this weighs against fair use. If however, there would likely be no effect on the potential commercial market, or if it is not possible to obtain permission to use the work, then this favors fair use. 

For further assistance with fair use, consult the Office for Scholarly Communication's guide, Fair Use: Made for the Harvard Community and the Office of the General Counsel's Copyright and Fair Use: A Guide for the Harvard Community .

What are my options if I don’t have a strong fair use claim? 

Consider the following options if you find you cannot reasonably make a fair use claim for the content you wish to incorporate:

• Seek permission from the copyright holder. 
• Use openly licensed content as an alternative to the original third-party content you intended to use. Openly-licensed content grants permission up-front for reuse of in-copyright content, provided your use meets the terms of the open license.
• Use content in the public domain, as this content is not in-copyright and is therefore free of all copyright restrictions. Whereas third-party content is owned by parties other than you, no one owns content in the public domain; everyone, therefore, has the right to use it.

For use of images in your dissertation, please consult this guide to Finding Public Domain & Creative Commons Media , which is a great resource for finding images without copyright restrictions. 

Who can help me with questions about copyright and fair use?

Contact your Copyright First Responder . Please note, Copyright First Responders assist with questions concerning copyright and fair use, but do not assist with the process of obtaining permission from copyright holders.

Pages should be assigned a number except for the Dissertation Acceptance Certificate . Preliminary pages (abstract, table of contents, list of tables, graphs, illustrations, and preface) should use small Roman numerals (i, ii, iii, iv, v, etc.). All pages must contain text or images.  

Count the title page as page i and the copyright page as page ii, but do not print page numbers on either page .

For the body of text, use Arabic numbers (1, 2, 3, 4, 5, etc.) starting with page 1 on the first page of text. Page numbers must be centered throughout the manuscript at the top or bottom. Every numbered page must be consecutively ordered, including tables, graphs, illustrations, and bibliography/index (if included); letter suffixes (such as 10a, 10b, etc.) are not allowed. It is customary not to have a page number on the page containing a chapter heading.

• Check pagination carefully. Account for all pages.

A copy of the Dissertation Acceptance Certificate (DAC) should appear as the first page. This page should not be counted or numbered. The DAC will appear in the online version of the published dissertation. The author name and date on the DAC and title page should be the same. 

The dissertation begins with the title page; the title should be as concise as possible and should provide an accurate description of the dissertation. The author name and date on the DAC and title page should be the same. 

• Do not print a page number on the title page. It is understood to be page  i  for counting purposes only.

A copyright notice should appear on a separate page immediately following the title page and include the copyright symbol ©, the year of first publication of the work, and the name of the author:

© [ year ] [ Author’s Name ] All rights reserved.

Alternatively, students may choose to license their work openly under a  Creative Commons  license. The author remains the copyright holder while at the same time granting up-front permission to others to read, share, and (depending on the license) adapt the work, so long as proper attribution is given. (By default, under copyright law, the author reserves all rights; under a Creative Commons license, the author reserves some rights.)

• Do  not  print a page number on the copyright page. It is understood to be page  ii  for counting purposes only.

An abstract, numbered as page  iii , should immediately follow the copyright page and should state the problem, describe the methods and procedures used, and give the main results or conclusions of the research. The abstract will appear in the online and bound versions of the dissertation and will be published by ProQuest. There is no maximum word count for the abstract. 

• double-spaced
• left-justified
• indented on the first line of each paragraph
• The author’s name, right justified
• The words “Dissertation Advisor:” followed by the advisor’s name, left-justified (a maximum of two advisors is allowed)
• Title of the dissertation, centered, several lines below author and advisor

Dissertations divided into sections must contain a table of contents that lists, at minimum, the major headings in the following order:

• Front Matter
• Body of Text
• Back Matter

Front matter includes (if applicable):

• acknowledgements of help or encouragement from individuals or institutions
• a dedication
• a list of illustrations or tables
• a glossary of terms
• one or more epigraphs.

Back matter includes (if applicable):

• bibliography
• supplemental materials, including figures and tables
• an index (in rare instances).

Supplemental figures and tables must be placed at the end of the dissertation in an appendix, not within or at the end of a chapter. If additional digital information (including audio, video, image, or datasets) will accompany the main body of the dissertation, it should be uploaded as a supplemental file through ProQuest ETD . Supplemental material will be available in DASH and ProQuest and preserved digitally in the Harvard University Archives.

As a matter of copyright, dissertations comprising the student's previously published works must be authorized for distribution from DASH. The guidelines in this section pertain to any previously published material that requires permission from publishers or other rightsholders before it may be distributed from DASH. Please note:

• Authors whose publishing agreements grant the publisher exclusive rights to display, distribute, and create derivative works will need to seek the publisher's permission for nonexclusive use of the underlying works before the dissertation may be distributed from DASH.
• Authors whose publishing agreements indicate the authors have retained the relevant nonexclusive rights to the original materials for display, distribution, and the creation of derivative works may distribute the dissertation as a whole from DASH without need for further permissions.

It is recommended that authors consult their publishing agreements directly to determine whether and to what extent they may have transferred exclusive rights under copyright. The Office for Scholarly Communication (OSC) is available to help the author determine whether she has retained the necessary rights or requires permission. Please note, however, the Office of Scholarly Communication is not able to assist with the permissions process itself.

• Missing Dissertation Acceptance Certificate.  The first page of the PDF dissertation file should be a scanned copy of the Dissertation Acceptance Certificate (DAC). This page should not be counted or numbered as a part of the dissertation pagination.
• Conflicts Between the DAC and the Title Page.  The DAC and the dissertation title page must match exactly, meaning that the author name and the title on the title page must match that on the DAC. If you use your full middle name or just an initial on one document, it must be the same on the other document.  
• Abstract Formatting Errors. The advisor name should be left-justified, and the author's name should be right-justified. Up to two advisor names are allowed. The Abstract should be double spaced and include the page title “Abstract,” as well as the page number “iii.” There is no maximum word count for the abstract. 
•  The front matter should be numbered using Roman numerals (iii, iv, v, …). The title page and the copyright page should be counted but not numbered. The first printed page number should appear on the Abstract page (iii). 
• The body of the dissertation should be numbered using Arabic numbers (1, 2, 3, …). The first page of the body of the text should begin with page 1. Pagination may not continue from the front matter. 
• All page numbers should be centered either at the top or the bottom of the page.
• Figures and tables Figures and tables must be placed within the text, as close to their first mention as possible. Figures and tables that span more than one page must be labeled on each page. Any second and subsequent page of the figure/table must include the “(Continued)” notation. This applies to figure captions as well as images. Each page of a figure/table must be accounted for and appropriately labeled. All figures/tables must have a unique number. They may not repeat within the dissertation.
• Any figures/tables placed in a horizontal orientation must be placed with the top of the figure/ table on the left-hand side. The top of the figure/table should be aligned with the spine of the dissertation when it is bound. 
• Page numbers must be placed in the same location on all pages of the dissertation, centered, at the bottom or top of the page. Page numbers may not appear under the table/ figure.
• Supplemental Figures and Tables. Supplemental figures and tables must be placed at the back of the dissertation in an appendix. They should not be placed at the back of the chapter. 
• Permission Letters Copyright. permission letters must be uploaded as a supplemental file, titled ‘do_not_publish_permission_letters,” within the dissertation submission tool.
•  DAC Attachment. The signed Dissertation Acceptance Certificate must additionally be uploaded as a document in the "Administrative Documents" section when submitting in Proquest ETD . Dissertation submission is not complete until all documents have been received and accepted.
• Overall Formatting. The entire document should be checked after all revisions, and before submitting online, to spot any inconsistencies or PDF conversion glitches.
• You can view dissertations successfully published from your department in DASH . This is a great place to check for specific formatting and area-specific conventions.
• Contact the  Office of Student Affairs  with further questions.

CONTACT INFO

Katie riggs, explore events.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation

How to Write a Thesis or Dissertation Introduction

Published on 9 September 2022 by Tegan George and Shona McCombes.

The introduction is the first section of your thesis or dissertation , appearing right after the table of contents . Your introduction draws your reader in, setting the stage for your research with a clear focus, purpose, and direction.

Your introduction should include:

• Your topic, in context: what does your reader need to know to understand your thesis dissertation?
• Your focus and scope: what specific aspect of the topic will you address?
• The relevance of your research: how does your work fit into existing studies on your topic?
• Your questions and objectives: what does your research aim to find out, and how?
• An overview of your structure: what does each section contribute to the overall aim?

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to start your introduction, topic and context, focus and scope, relevance and importance, questions and objectives, overview of the structure, thesis introduction example, introduction checklist, frequently asked questions about introductions.

Although your introduction kicks off your dissertation, it doesn’t have to be the first thing you write – in fact, it’s often one of the very last parts to be completed (just before your abstract ).

It’s a good idea to write a rough draft of your introduction as you begin your research, to help guide you. If you wrote a research proposal , consider using this as a template, as it contains many of the same elements. However, be sure to revise your introduction throughout the writing process, making sure it matches the content of your ensuing sections.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Begin by introducing your research topic and giving any necessary background information. It’s important to contextualise your research and generate interest. Aim to show why your topic is timely or important. You may want to mention a relevant news item, academic debate, or practical problem.

After a brief introduction to your general area of interest, narrow your focus and define the scope of your research.

You can narrow this down in many ways, such as by:

• Geographical area
• Time period
• Demographics or communities
• Themes or aspects of the topic

It’s essential to share your motivation for doing this research, as well as how it relates to existing work on your topic. Further, you should also mention what new insights you expect it will contribute.

Start by giving a brief overview of the current state of research. You should definitely cite the most relevant literature, but remember that you will conduct a more in-depth survey of relevant sources in the literature review section, so there’s no need to go too in-depth in the introduction.

Depending on your field, the importance of your research might focus on its practical application (e.g., in policy or management) or on advancing scholarly understanding of the topic (e.g., by developing theories or adding new empirical data). In many cases, it will do both.

Ultimately, your introduction should explain how your thesis or dissertation:

• Helps solve a practical or theoretical problem
• Addresses a gap in the literature
• Builds on existing research
• Proposes a new understanding of your topic

Prevent plagiarism, run a free check.

Perhaps the most important part of your introduction is your questions and objectives, as it sets up the expectations for the rest of your thesis or dissertation. How you formulate your research questions and research objectives will depend on your discipline, topic, and focus, but you should always clearly state the central aim of your research.

If your research aims to test hypotheses , you can formulate them here. Your introduction is also a good place for a conceptual framework that suggests relationships between variables .

• Conduct surveys to collect data on students’ levels of knowledge, understanding, and positive/negative perceptions of government policy.
• Determine whether attitudes to climate policy are associated with variables such as age, gender, region, and social class.
• Conduct interviews to gain qualitative insights into students’ perspectives and actions in relation to climate policy.

To help guide your reader, end your introduction with an outline  of the structure of the thesis or dissertation to follow. Share a brief summary of each chapter, clearly showing how each contributes to your central aims. However, be careful to keep this overview concise: 1-2 sentences should be enough.

I. Introduction

Human language consists of a set of vowels and consonants which are combined to form words. During the speech production process, thoughts are converted into spoken utterances to convey a message. The appropriate words and their meanings are selected in the mental lexicon (Dell & Burger, 1997). This pre-verbal message is then grammatically coded, during which a syntactic representation of the utterance is built.

Speech, language, and voice disorders affect the vocal cords, nerves, muscles, and brain structures, which result in a distorted language reception or speech production (Sataloff & Hawkshaw, 2014). The symptoms vary from adding superfluous words and taking pauses to hoarseness of the voice, depending on the type of disorder (Dodd, 2005). However, distortions of the speech may also occur as a result of a disease that seems unrelated to speech, such as multiple sclerosis or chronic obstructive pulmonary disease.

This study aims to determine which acoustic parameters are suitable for the automatic detection of exacerbations in patients suffering from chronic obstructive pulmonary disease (COPD) by investigating which aspects of speech differ between COPD patients and healthy speakers and which aspects differ between COPD patients in exacerbation and stable COPD patients.

Checklist: Introduction

I have introduced my research topic in an engaging way.

I have provided necessary context to help the reader understand my topic.

I have clearly specified the focus of my research.

I have shown the relevance and importance of the dissertation topic .

I have clearly stated the problem or question that my research addresses.

I have outlined the specific objectives of the research .

I have provided an overview of the dissertation’s structure .

You've written a strong introduction for your thesis or dissertation. Use the other checklists to continue improving your dissertation.

The introduction of a research paper includes several key elements:

• A hook to catch the reader’s interest
• Relevant background on the topic
• Details of your research problem
• A thesis statement or research question
• Sometimes an outline of the paper

Don’t feel that you have to write the introduction first. The introduction is often one of the last parts of the research paper you’ll write, along with the conclusion.

This is because it can be easier to introduce your paper once you’ve already written the body ; you may not have the clearest idea of your arguments until you’ve written them, and things can change during the writing process .

Research objectives describe what you intend your research project to accomplish.

They summarise the approach and purpose of the project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. & McCombes, S. (2022, September 09). How to Write a Thesis or Dissertation Introduction. Scribbr. Retrieved 14 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/introduction/

Is this article helpful?

Tegan George

Other students also liked, what is a dissertation | 5 essential questions to get started, how to write an abstract | steps & examples, how to write a thesis or dissertation conclusion.

May 15, 2024

Tips and Resources for a Successful Summer of Dissertation Writing

By Yana Zlochistaya

Summer can be a strange time for graduate students. Gone are the seminars and workshops, the student clubs, and the working group, that structured the semester and provided us with a sense of community. Instead, we’re faced with a three-month expanse of time that can feel equal parts liberating and intimidating. This double-edged freedom is only exacerbated for those of us in the writing stage of our dissertation, when isolation and a lack of discipline can have a particularly big impact. For those hoping not to enter another summer with lofty plans, only to blink and find ourselves in August disappointed with our progress, we’ve compiled some tips and resources that can help.

According to Graduate Writing Center Director Sabrina Soracco, the most important thing you can do to set yourself up for writing success is to clarify your goals. She recommends starting this process by looking at departmental requirements for a completed dissertation. Consider when you would like to file and work backwards from that point, determining what you have to get done in order to hit that target. Next, check in with your dissertation committee members to set up an accountability structure. Would they prefer an end-of-summer update to the whole committee? A monthly check-in with your chair or one of your readers? Setting up explicit expectations that work for you and your committee can cut through the aimlessness that comes with a major writing project.

For those early on in their dissertation-writing process, a committee meeting is also a valuable opportunity to set parameters. “One of the problems with the excitement for the discipline that happens post-quals is that it results in too many ideas,” says Director Soracco. Your committee members should give you input on productive research directions so that you can begin to hone in on your project. It is also important to remember that your dissertation does not have to be the end-all-and-be-all of your academic research. Ideas that do not fit into its scope can end up becoming conference papers or even book chapters.

Once you have a clear goal that you have discussed with your committee, the hard part begins: you have to actually write. The Graduate Writing Center offers several resources to make that process easier:

• The Graduate Writing Community. This is a totally remote, two-month program that is based on a model of “gentle accountability.” When you sign up, you are added to a bCourses site moderated by a Graduate Writing Consultant. At the beginning of the week, everyone sets their goals in a discussion post, and by the end of the week, everyone checks in with progress updates. During the week, the writing consultants offer nine hours of remote synchronous writing sessions. As a writing community member, you can attend whichever sessions work best for your schedule. All that’s required is that you show up, set a goal for that hour, and work towards that goal for the length of two 25-minute Pomodoro sessions . This year’s summer writing community will begin in June. Keep your eye on your email for the registration link!
• Writing Consultations : As a graduate student, you can sign up for an individual meeting with a Graduate Writing Consultant. They can give you feedback on your work, help you figure out the structure of a chapter, or just talk through how to get started on a writing project. 
• Independent Writing Groups: If you would prefer to write with specific friends or colleagues, you can contact Graduate Writing Center Director Sabrina Soracco at [email protected] so that she can help you set up your own writing group. The structure and length of these groups can differ; often, members will send each other one to five pages of writing weekly and meet the next day for two hours to provide feedback and get advice. Sometimes, groups will meet up not only to share writing, but to work in a common space before coming together to debrief. Regardless of what the groups look like, the important thing is to create a guilt-free space. Some weeks, you might submit an outline; other weeks, it might be the roughest of rough drafts; sometimes, you might come to a session without having submitted anything. As long as we continue to make progress (and show up even when we don’t), we’re doing what we need to. As Director Soracco puts it, “it often takes slogging through a lot of stuff to get to that great epiphany.”

Yana Zlochistaya is a fifth-year graduate student in the Department of Comparative Literature and a Professional Development Liaison with the Graduate Division. She previously served as a co-director for Beyond Academia.