phd thesis research objectives

• Aims and Objectives – A Guide for Academic Writing
• Doing a PhD

One of the most important aspects of a thesis, dissertation or research paper is the correct formulation of the aims and objectives. This is because your aims and objectives will establish the scope, depth and direction that your research will ultimately take. An effective set of aims and objectives will give your research focus and your reader clarity, with your aims indicating what is to be achieved, and your objectives indicating how it will be achieved.

Introduction

There is no getting away from the importance of the aims and objectives in determining the success of your research project. Unfortunately, however, it is an aspect that many students struggle with, and ultimately end up doing poorly. Given their importance, if you suspect that there is even the smallest possibility that you belong to this group of students, we strongly recommend you read this page in full.

This page describes what research aims and objectives are, how they differ from each other, how to write them correctly, and the common mistakes students make and how to avoid them. An example of a good aim and objectives from a past thesis has also been deconstructed to help your understanding.

What Are Aims and Objectives?

Research aims.

A research aim describes the main goal or the overarching purpose of your research project.

In doing so, it acts as a focal point for your research and provides your readers with clarity as to what your study is all about. Because of this, research aims are almost always located within its own subsection under the introduction section of a research document, regardless of whether it’s a thesis , a dissertation, or a research paper .

A research aim is usually formulated as a broad statement of the main goal of the research and can range in length from a single sentence to a short paragraph. Although the exact format may vary according to preference, they should all describe why your research is needed (i.e. the context), what it sets out to accomplish (the actual aim) and, briefly, how it intends to accomplish it (overview of your objectives).

To give an example, we have extracted the following research aim from a real PhD thesis:

Example of a Research Aim

The role of diametrical cup deformation as a factor to unsatisfactory implant performance has not been widely reported. The aim of this thesis was to gain an understanding of the diametrical deformation behaviour of acetabular cups and shells following impaction into the reamed acetabulum. The influence of a range of factors on deformation was investigated to ascertain if cup and shell deformation may be high enough to potentially contribute to early failure and high wear rates in metal-on-metal implants.

Note: Extracted with permission from thesis titled “T he Impact And Deformation Of Press-Fit Metal Acetabular Components ” produced by Dr H Hothi of previously Queen Mary University of London.

Research Objectives

Where a research aim specifies what your study will answer, research objectives specify how your study will answer it.

They divide your research aim into several smaller parts, each of which represents a key section of your research project. As a result, almost all research objectives take the form of a numbered list, with each item usually receiving its own chapter in a dissertation or thesis.

Following the example of the research aim shared above, here are it’s real research objectives as an example:

Example of a Research Objective

• Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.
• Investigate the number, velocity and position of impacts needed to insert a cup.
• Determine the relationship between the size of interference between the cup and cavity and deformation for different cup types.
• Investigate the influence of non-uniform cup support and varying the orientation of the component in the cavity on deformation.
• Examine the influence of errors during reaming of the acetabulum which introduce ovality to the cavity.
• Determine the relationship between changes in the geometry of the component and deformation for different cup designs.
• Develop three dimensional pelvis models with non-uniform bone material properties from a range of patients with varying bone quality.
• Use the key parameters that influence deformation, as identified in the foam models to determine the range of deformations that may occur clinically using the anatomic models and if these deformations are clinically significant.

It’s worth noting that researchers sometimes use research questions instead of research objectives, or in other cases both. From a high-level perspective, research questions and research objectives make the same statements, but just in different formats.

Taking the first three research objectives as an example, they can be restructured into research questions as follows:

Restructuring Research Objectives as Research Questions

• Can finite element models using simplified experimentally validated foam models to represent the acetabulum together with explicit dynamics be used to mimic mallet blows during cup/shell insertion?
• What is the number, velocity and position of impacts needed to insert a cup?
• What is the relationship between the size of interference between the cup and cavity and deformation for different cup types?

Difference Between Aims and Objectives

Hopefully the above explanations make clear the differences between aims and objectives, but to clarify:

• The research aim focus on what the research project is intended to achieve; research objectives focus on how the aim will be achieved.
• Research aims are relatively broad; research objectives are specific.
• Research aims focus on a project’s long-term outcomes; research objectives focus on its immediate, short-term outcomes.
• A research aim can be written in a single sentence or short paragraph; research objectives should be written as a numbered list.

How to Write Aims and Objectives

Before we discuss how to write a clear set of research aims and objectives, we should make it clear that there is no single way they must be written. Each researcher will approach their aims and objectives slightly differently, and often your supervisor will influence the formulation of yours on the basis of their own preferences.

Regardless, there are some basic principles that you should observe for good practice; these principles are described below.

Your aim should be made up of three parts that answer the below questions:

• Why is this research required?
• What is this research about?
• How are you going to do it?

The easiest way to achieve this would be to address each question in its own sentence, although it does not matter whether you combine them or write multiple sentences for each, the key is to address each one.

The first question, why , provides context to your research project, the second question, what , describes the aim of your research, and the last question, how , acts as an introduction to your objectives which will immediately follow.

Scroll through the image set below to see the ‘why, what and how’ associated with our research aim example.

Note: Your research aims need not be limited to one. Some individuals per to define one broad ‘overarching aim’ of a project and then adopt two or three specific research aims for their thesis or dissertation. Remember, however, that in order for your assessors to consider your research project complete, you will need to prove you have fulfilled all of the aims you set out to achieve. Therefore, while having more than one research aim is not necessarily disadvantageous, consider whether a single overarching one will do.

Research Objectives

Each of your research objectives should be SMART :

• Specific – is there any ambiguity in the action you are going to undertake, or is it focused and well-defined?
• Measurable – how will you measure progress and determine when you have achieved the action?
• Achievable – do you have the support, resources and facilities required to carry out the action?
• Relevant – is the action essential to the achievement of your research aim?
• Timebound – can you realistically complete the action in the available time alongside your other research tasks?

In addition to being SMART, your research objectives should start with a verb that helps communicate your intent. Common research verbs include:

Table of Research Verbs to Use in Aims and Objectives

Last, format your objectives into a numbered list. This is because when you write your thesis or dissertation, you will at times need to make reference to a specific research objective; structuring your research objectives in a numbered list will provide a clear way of doing this.

To bring all this together, let’s compare the first research objective in the previous example with the above guidance:

Checking Research Objective Example Against Recommended Approach

Research Objective:

1. Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.

Checking Against Recommended Approach:

Q: Is it specific? A: Yes, it is clear what the student intends to do (produce a finite element model), why they intend to do it (mimic cup/shell blows) and their parameters have been well-defined ( using simplified experimentally validated foam models to represent the acetabulum ).

Q: Is it measurable? A: Yes, it is clear that the research objective will be achieved once the finite element model is complete.

Q: Is it achievable? A: Yes, provided the student has access to a computer lab, modelling software and laboratory data.

Q: Is it relevant? A: Yes, mimicking impacts to a cup/shell is fundamental to the overall aim of understanding how they deform when impacted upon.

Q: Is it timebound? A: Yes, it is possible to create a limited-scope finite element model in a relatively short time, especially if you already have experience in modelling.

Q: Does it start with a verb? A: Yes, it starts with ‘develop’, which makes the intent of the objective immediately clear.

Q: Is it a numbered list? A: Yes, it is the first research objective in a list of eight.

Mistakes in Writing Research Aims and Objectives

1. making your research aim too broad.

Having a research aim too broad becomes very difficult to achieve. Normally, this occurs when a student develops their research aim before they have a good understanding of what they want to research. Remember that at the end of your project and during your viva defence , you will have to prove that you have achieved your research aims; if they are too broad, this will be an almost impossible task. In the early stages of your research project, your priority should be to narrow your study to a specific area. A good way to do this is to take the time to study existing literature, question their current approaches, findings and limitations, and consider whether there are any recurring gaps that could be investigated .

Note: Achieving a set of aims does not necessarily mean proving or disproving a theory or hypothesis, even if your research aim was to, but having done enough work to provide a useful and original insight into the principles that underlie your research aim.

2. Making Your Research Objectives Too Ambitious

Be realistic about what you can achieve in the time you have available. It is natural to want to set ambitious research objectives that require sophisticated data collection and analysis, but only completing this with six months before the end of your PhD registration period is not a worthwhile trade-off.

3. Formulating Repetitive Research Objectives

Each research objective should have its own purpose and distinct measurable outcome. To this effect, a common mistake is to form research objectives which have large amounts of overlap. This makes it difficult to determine when an objective is truly complete, and also presents challenges in estimating the duration of objectives when creating your project timeline. It also makes it difficult to structure your thesis into unique chapters, making it more challenging for you to write and for your audience to read.

Fortunately, this oversight can be easily avoided by using SMART objectives.

Hopefully, you now have a good idea of how to create an effective set of aims and objectives for your research project, whether it be a thesis, dissertation or research paper. While it may be tempting to dive directly into your research, spending time on getting your aims and objectives right will give your research clear direction. This won’t only reduce the likelihood of problems arising later down the line, but will also lead to a more thorough and coherent research project.

Finding a PhD has never been this easy – search for a PhD by keyword, location or academic area of interest.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Research Aims, Objectives & Questions

The “Golden Thread” Explained Simply (+ Examples)

By: David Phair (PhD) and Alexandra Shaeffer (PhD) | June 2022

The research aims , objectives and research questions (collectively called the “golden thread”) are arguably the most important thing you need to get right when you’re crafting a research proposal , dissertation or thesis . We receive questions almost every day about this “holy trinity” of research and there’s certainly a lot of confusion out there, so we’ve crafted this post to help you navigate your way through the fog.

Overview: The Golden Thread

• What is the golden thread
• What are research aims ( examples )
• What are research objectives ( examples )
• What are research questions ( examples )
• The importance of alignment in the golden thread

What is the “golden thread”?  

The golden thread simply refers to the collective research aims , research objectives , and research questions for any given project (i.e., a dissertation, thesis, or research paper ). These three elements are bundled together because it’s extremely important that they align with each other, and that the entire research project aligns with them.

Importantly, the golden thread needs to weave its way through the entirety of any research project , from start to end. In other words, it needs to be very clearly defined right at the beginning of the project (the topic ideation and proposal stage) and it needs to inform almost every decision throughout the rest of the project. For example, your research design and methodology will be heavily influenced by the golden thread (we’ll explain this in more detail later), as well as your literature review.

The research aims, objectives and research questions (the golden thread) define the focus and scope ( the delimitations ) of your research project. In other words, they help ringfence your dissertation or thesis to a relatively narrow domain, so that you can “go deep” and really dig into a specific problem or opportunity. They also help keep you on track , as they act as a litmus test for relevance. In other words, if you’re ever unsure whether to include something in your document, simply ask yourself the question, “does this contribute toward my research aims, objectives or questions?”. If it doesn’t, chances are you can drop it.

Alright, enough of the fluffy, conceptual stuff. Let’s get down to business and look at what exactly the research aims, objectives and questions are and outline a few examples to bring these concepts to life.

Research Aims: What are they?

Simply put, the research aim(s) is a statement that reflects the broad overarching goal (s) of the research project. Research aims are fairly high-level (low resolution) as they outline the general direction of the research and what it’s trying to achieve .

Research Aims: Examples  

True to the name, research aims usually start with the wording “this research aims to…”, “this research seeks to…”, and so on. For example:

“This research aims to explore employee experiences of digital transformation in retail HR.”   “This study sets out to assess the interaction between student support and self-care on well-being in engineering graduate students”  

As you can see, these research aims provide a high-level description of what the study is about and what it seeks to achieve. They’re not hyper-specific or action-oriented, but they’re clear about what the study’s focus is and what is being investigated.

Need a helping hand?

Research Objectives: What are they?

The research objectives take the research aims and make them more practical and actionable . In other words, the research objectives showcase the steps that the researcher will take to achieve the research aims.

The research objectives need to be far more specific (higher resolution) and actionable than the research aims. In fact, it’s always a good idea to craft your research objectives using the “SMART” criteria. In other words, they should be specific, measurable, achievable, relevant and time-bound”.

Research Objectives: Examples  

Let’s look at two examples of research objectives. We’ll stick with the topic and research aims we mentioned previously.  

For the digital transformation topic:

To observe the retail HR employees throughout the digital transformation. To assess employee perceptions of digital transformation in retail HR. To identify the barriers and facilitators of digital transformation in retail HR.

And for the student wellness topic:

To determine whether student self-care predicts the well-being score of engineering graduate students. To determine whether student support predicts the well-being score of engineering students. To assess the interaction between student self-care and student support when predicting well-being in engineering graduate students.

  As you can see, these research objectives clearly align with the previously mentioned research aims and effectively translate the low-resolution aims into (comparatively) higher-resolution objectives and action points . They give the research project a clear focus and present something that resembles a research-based “to-do” list.

Research Questions: What are they?

Finally, we arrive at the all-important research questions. The research questions are, as the name suggests, the key questions that your study will seek to answer . Simply put, they are the core purpose of your dissertation, thesis, or research project. You’ll present them at the beginning of your document (either in the introduction chapter or literature review chapter) and you’ll answer them at the end of your document (typically in the discussion and conclusion chapters).  

The research questions will be the driving force throughout the research process. For example, in the literature review chapter, you’ll assess the relevance of any given resource based on whether it helps you move towards answering your research questions. Similarly, your methodology and research design will be heavily influenced by the nature of your research questions. For instance, research questions that are exploratory in nature will usually make use of a qualitative approach, whereas questions that relate to measurement or relationship testing will make use of a quantitative approach.  

Let’s look at some examples of research questions to make this more tangible.

Research Questions: Examples  

Again, we’ll stick with the research aims and research objectives we mentioned previously.  

For the digital transformation topic (which would be qualitative in nature):

How do employees perceive digital transformation in retail HR? What are the barriers and facilitators of digital transformation in retail HR?  

And for the student wellness topic (which would be quantitative in nature):

Does student self-care predict the well-being scores of engineering graduate students? Does student support predict the well-being scores of engineering students? Do student self-care and student support interact when predicting well-being in engineering graduate students?  

You’ll probably notice that there’s quite a formulaic approach to this. In other words, the research questions are basically the research objectives “converted” into question format. While that is true most of the time, it’s not always the case. For example, the first research objective for the digital transformation topic was more or less a step on the path toward the other objectives, and as such, it didn’t warrant its own research question.  

So, don’t rush your research questions and sloppily reword your objectives as questions. Carefully think about what exactly you’re trying to achieve (i.e. your research aim) and the objectives you’ve set out, then craft a set of well-aligned research questions . Also, keep in mind that this can be a somewhat iterative process , where you go back and tweak research objectives and aims to ensure tight alignment throughout the golden thread.

The importance of strong alignment 

Alignment is the keyword here and we have to stress its importance . Simply put, you need to make sure that there is a very tight alignment between all three pieces of the golden thread. If your research aims and research questions don’t align, for example, your project will be pulling in different directions and will lack focus . This is a common problem students face and can cause many headaches (and tears), so be warned.

Take the time to carefully craft your research aims, objectives and research questions before you run off down the research path. Ideally, get your research supervisor/advisor to review and comment on your golden thread before you invest significant time into your project, and certainly before you start collecting data .  

Recap: The golden thread

In this post, we unpacked the golden thread of research, consisting of the research aims , research objectives and research questions . You can jump back to any section using the links below.

As always, feel free to leave a comment below – we always love to hear from you. Also, if you’re interested in 1-on-1 support, take a look at our private coaching service here.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

39 Comments

Thank you very much for your great effort put. As an Undergraduate taking Demographic Research & Methodology, I’ve been trying so hard to understand clearly what is a Research Question, Research Aim and the Objectives in a research and the relationship between them etc. But as for now I’m thankful that you’ve solved my problem.

Well appreciated. This has helped me greatly in doing my dissertation.

An so delighted with this wonderful information thank you a lot.

so impressive i have benefited a lot looking forward to learn more on research.

I am very happy to have carefully gone through this well researched article.

Infact,I used to be phobia about anything research, because of my poor understanding of the concepts.

Now,I get to know that my research question is the same as my research objective(s) rephrased in question format.

I please I would need a follow up on the subject,as I intends to join the team of researchers. Thanks once again.

Thanks so much. This was really helpful.

I know you pepole have tried to break things into more understandable and easy format. And God bless you. Keep it up

i found this document so useful towards my study in research methods. thanks so much.

This is my 2nd read topic in your course and I should commend the simplified explanations of each part. I’m beginning to understand and absorb the use of each part of a dissertation/thesis. I’ll keep on reading your free course and might be able to avail the training course! Kudos!

Thank you! Better put that my lecture and helped to easily understand the basics which I feel often get brushed over when beginning dissertation work.

This is quite helpful. I like how the Golden thread has been explained and the needed alignment.

This is quite helpful. I really appreciate!

The article made it simple for researcher students to differentiate between three concepts.

Very innovative and educational in approach to conducting research.

I am very impressed with all these terminology, as I am a fresh student for post graduate, I am highly guided and I promised to continue making consultation when the need arise. Thanks a lot.

A very helpful piece. thanks, I really appreciate it .

Very well explained, and it might be helpful to many people like me.

Wish i had found this (and other) resource(s) at the beginning of my PhD journey… not in my writing up year… 😩 Anyways… just a quick question as i’m having some issues ordering my “golden thread”…. does it matter in what order you mention them? i.e., is it always first aims, then objectives, and finally the questions? or can you first mention the research questions and then the aims and objectives?

Thank you for a very simple explanation that builds upon the concepts in a very logical manner. Just prior to this, I read the research hypothesis article, which was equally very good. This met my primary objective.

My secondary objective was to understand the difference between research questions and research hypothesis, and in which context to use which one. However, I am still not clear on this. Can you kindly please guide?

In research, a research question is a clear and specific inquiry that the researcher wants to answer, while a research hypothesis is a tentative statement or prediction about the relationship between variables or the expected outcome of the study. Research questions are broader and guide the overall study, while hypotheses are specific and testable statements used in quantitative research. Research questions identify the problem, while hypotheses provide a focus for testing in the study.

Exactly what I need in this research journey, I look forward to more of your coaching videos.

This helped a lot. Thanks so much for the effort put into explaining it.

What data source in writing dissertation/Thesis requires?

What is data source covers when writing dessertation/thesis

This is quite useful thanks

I’m excited and thankful. I got so much value which will help me progress in my thesis.

where are the locations of the reserch statement, research objective and research question in a reserach paper? Can you write an ouline that defines their places in the researh paper?

Very helpful and important tips on Aims, Objectives and Questions.

Thank you so much for making research aim, research objectives and research question so clear. This will be helpful to me as i continue with my thesis.

Thanks much for this content. I learned a lot. And I am inspired to learn more. I am still struggling with my preparation for dissertation outline/proposal. But I consistently follow contents and tutorials and the new FB of GRAD Coach. Hope to really become confident in writing my dissertation and successfully defend it.

As a researcher and lecturer, I find splitting research goals into research aims, objectives, and questions is unnecessarily bureaucratic and confusing for students. For most biomedical research projects, including ‘real research’, 1-3 research questions will suffice (numbers may differ by discipline).

Awesome! Very important resources and presented in an informative way to easily understand the golden thread. Indeed, thank you so much.

Well explained

The blog article on research aims, objectives, and questions by Grad Coach is a clear and insightful guide that aligns with my experiences in academic research. The article effectively breaks down the often complex concepts of research aims and objectives, providing a straightforward and accessible explanation. Drawing from my own research endeavors, I appreciate the practical tips offered, such as the need for specificity and clarity when formulating research questions. The article serves as a valuable resource for students and researchers, offering a concise roadmap for crafting well-defined research goals and objectives. Whether you’re a novice or an experienced researcher, this article provides practical insights that contribute to the foundational aspects of a successful research endeavor.

A great thanks for you. it is really amazing explanation. I grasp a lot and one step up to research knowledge.

I really found these tips helpful. Thank you very much Grad Coach.

I found this article helpful. Thanks for sharing this.

thank you so much, the explanation and examples are really helpful

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Research Voyage

Research Tips and Infromation

How to Write Aims and Objectives for your Dissertation or Thesis?

Introduction

Understanding aims and objectives, crafting aims, break it down into objectives, developing specific objectives, align with research questions, consider feasibility, review and refine, seek feedback, documenting aims and objectives.

In a PhD or Post Graduate dissertation, the aims and objectives play a crucial role in shaping the research process and ensuring focus. They provide a clear roadmap for your study and serve as the guiding principles that steer your research in the right direction.

Aims represent the broader purpose or the overarching goal of your research. They define what you want to achieve with your dissertation. For example, let’s say you’re conducting a study on renewable energy sources. Your aim could be to analyze the economic viability and environmental impact of solar energy adoption in residential areas.

Objectives, on the other hand, break down the aim into specific, measurable, and achievable targets that help you accomplish your research goal. They outline the specific steps or tasks you need to undertake to fulfill the aim. Continuing with the previous example, some objectives could be:

• Evaluate the current state of solar energy technologies and their efficiency.
• Assess the economic costs and benefits associated with the installation of solar panels in residential areas.
• Analyze the environmental impact of solar energy adoption in terms of carbon emissions reduction.
• Investigate the potential barriers to the widespread adoption of solar energy in residential communities.
• Develop recommendations for policymakers and stakeholders to promote the use of solar energy in residential areas.

These objectives, when combined, address different aspects related to the aim of analyzing the economic viability and environmental impact of solar energy adoption. Each objective guides a specific aspect of the research and contributes to answering the research questions.

By having clear aims and objectives, you establish a solid framework for your study. They help you stay focused on the main purpose of your research and prevent you from getting sidetracked or overwhelmed by tangential topics. Moreover, they provide clarity to both you and your readers, ensuring that your research remains coherent and well-structured.

In summary, clear aims and objectives are instrumental in guiding the research process of a PhD dissertation. They provide a roadmap, define the research goal, and break it down into specific targets. Through the example provided, it is evident how aims and objectives bring focus to a study on renewable energy sources and solar energy adoption in residential areas.

If you are in paucity of time, not confident of your writing skills and in a hurry to complete the writing task then you can think of hiring a research consultant that solves all your problems. Please visit my article on Hiring a Research consultant for your PhD tasks for further details.

Aims and objectives play a crucial role in guiding research projects. It’s important to define these terms and differentiate between them to ensure a clear focus in your work.

Aims represent the broader purpose or goal of your study. They define what you aim to achieve through your research project. Aims provide the overarching context and direction for your work, guiding the selection of topics, methodologies, and outcomes.

Example: Suppose you’re working on a PhD dissertation in computer science with a focus on natural language processing. Your aim could be: “To develop an efficient and accurate algorithm for sentiment analysis in social media data.”

In this example, the aim highlights the objective of creating an algorithm specifically for sentiment analysis in social media data, indicating the main objective of your research.

Objectives break down the aim into specific, measurable, and achievable targets that contribute to achieving the overall goal. They are more focused and concrete than aims, outlining the steps or tasks necessary to fulfill the aim. Objectives serve as the building blocks of your research, guiding the implementation and evaluation of your work.

Example: Continuing with the previous aim, let’s define some specific objectives:

• Collect and preprocess a large dataset of social media posts for sentiment analysis.
• Explore and compare existing sentiment analysis techniques to identify their limitations and strengths.
• Design and develop a novel algorithm that addresses the limitations of current approaches.
• Implement the algorithm and evaluate its performance on the collected dataset.
• Analyze the results and compare them with existing state-of-the-art sentiment analysis methods.

These objectives, when combined, address different aspects necessary to fulfill the aim of developing an efficient and accurate sentiment analysis algorithm for social media data. Each objective represents a specific task or milestone that contributes to the overall research goal.

The relationship between aims and objectives is critical in driving research. Objectives are derived from the aim and provide the means to accomplish it. They act as stepping stones, guiding the researcher towards achieving the broader aim.

In summary, aims provide the broader context and goal, while objectives break down the aim into specific tasks and milestones. Together, they ensure focus and direction in your research, guiding the selection of topics, methodologies, and outcomes. The objectives serve as the means to achieve the overall aim, highlighting the relationship between aims and objectives in driving research in the computer science domain.

Formulating the overarching aim of your research is a crucial step in defining the direction and purpose of your dissertation. The aim represents the primary goal or intention of your study, and crafting it effectively is essential for setting the foundation of your research.

Research Topic: Enhancing cybersecurity in cloud computing environments.

In this example, the aim focuses on improving cybersecurity in the context of cloud computing. The aim should be formulated in a concise and focused manner that aligns with the research topic. Here’s an example of how the aim could be crafted effectively:

Aim: Develop an efficient and robust security framework for ensuring data confidentiality, integrity, and availability in cloud computing environments.

The above aim encapsulates the overall goal of the research, which is to develop a security framework for enhancing cybersecurity in cloud computing. It clearly states the intention to address key aspects such as data confidentiality, integrity, and availability. The aim is concise, specific, and directly aligned with the research topic.

The significance of a well-defined aim cannot be overstated. It serves as a guiding beacon throughout your research journey, providing a clear direction and purpose. A well-crafted aim helps you stay focused and ensures that your efforts are aligned with the research’s core objectives. It also helps you communicate the purpose of your study to others, including your advisor, peers, and potential readers of your dissertation.

Additionally, an effective aim sets the stage for the subsequent development of specific objectives and research questions. It serves as a foundation upon which you can break down the aim into smaller, manageable objectives that contribute to achieving the overall research goal. Each objective should align with the aim and work together harmoniously to address the research questions and gaps in the field.

Moreover, a concise and aligned aim allows readers to quickly grasp the essence of your research. It provides them with a clear understanding of the research’s scope and purpose. By stating the aim concisely and aligning it with the research topic, you demonstrate your ability to articulate the core objective of your study in a succinct manner.

In summary, crafting effective aims involves formulating the overarching goal or intention of your research in a concise and focused manner. A well-defined aim sets the direction for your dissertation, guiding your efforts and ensuring alignment with the research topic. It serves as a foundation for the development of specific objectives and research questions. By presenting a clear and aligned aim, you convey the purpose of your study to others and demonstrate your ability to articulate the core objective of your research.

After defining the aim of your research, it’s important to break it down into smaller, manageable objectives. These objectives should address key research questions or subtopics that are necessary to achieve the overall aim. Additionally, objectives should be specific, measurable, and utilize action verbs to describe the intended actions or achievements.

Example: Suppose the aim of your research is to develop a recommendation system for an e-commerce platform. Here are some examples of specific objectives:

• Action Verbs: Analyze, Identify
• Description: Gather and analyze user preferences and historical data from the e-commerce platform to identify patterns in user behavior and item preferences.
• Action Verbs: Design, Implement
• Description: Develop and implement collaborative filtering algorithms, such as user-based or item-based methods, to generate personalized recommendations based on user similarities or item similarities.
• Action Verbs: Incorporate
• Description: Integrate machine learning techniques, such as matrix factorization or deep learning models, into the recommendation system to improve the accuracy and personalization of the recommendations.
• Action Verbs: Evaluate
• Description: Conduct experiments and evaluate the performance of the recommendation system using appropriate evaluation metrics, such as precision, recall, or mean average precision, to assess the effectiveness and efficiency of the system.
• Action Verbs: Optimize
• Description: Identify and implement optimization techniques, such as parallel computing or distributed systems, to enhance the scalability and efficiency of the recommendation algorithm, allowing it to handle large-scale datasets and real-time recommendations.

By breaking down the aim into these specific objectives, you address key components of developing a recommendation system, such as data analysis, algorithm design, evaluation, and optimization. Each objective represents a distinct step that contributes to achieving the overall aim.

Importantly, these objectives are specific and measurable, allowing you to determine whether you have successfully achieved them. For instance, you can measure the accuracy of the recommendation system, evaluate its performance against baseline models, or assess its scalability in terms of handling large datasets.

In summary, when conducting research, breaking down the aim into specific objectives helps in managing the workload and providing a clear roadmap for your research. These objectives should address key research questions or subtopics, be specific and measurable, and use action verbs to describe the intended actions or achievements. By following this approach, you can ensure a systematic and focused research process.

To develop specific objectives for your research, you need to break down the overarching aim into smaller, measurable objectives. These objectives should be clear, specific, and actionable, providing a roadmap for your research and guiding the entire research process.

Aim: Develop a machine learning-based system for automated sentiment analysis in social media data.

Objective 1: Conduct a comprehensive literature review on existing sentiment analysis techniques and methodologies.

• Breakdown: This objective focuses on reviewing the literature in the field of sentiment analysis, specifically examining the various techniques and methodologies that have been developed and applied. It involves gathering and analyzing research papers, books, and other relevant sources to gain a comprehensive understanding of the existing knowledge in sentiment analysis.

Objective 2: Collect a large dataset of social media posts for training and evaluation.

• Breakdown: This objective entails the collection of a substantial amount of social media data that will be used as input for training and evaluating the machine learning model. It involves designing data collection mechanisms, such as web scraping or utilizing available APIs, to gather a diverse set of social media posts from platforms like Twitter or Facebook.

Objective 3: Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.

• Breakdown: This objective focuses on the development of a machine learning algorithm tailored for sentiment analysis in social media text. It involves designing and implementing the necessary algorithms, selecting appropriate feature representations, and training a model to accurately classify sentiment polarity (positive, negative, or neutral) of social media posts.

Objective 4: Evaluate the performance of the developed sentiment analysis system against benchmark datasets and compare it with existing state-of-the-art approaches.

• Breakdown: This objective involves assessing the performance of the developed sentiment analysis system by evaluating it against established benchmark datasets. It requires selecting appropriate evaluation metrics and comparing the system’s performance with existing state-of-the-art approaches in sentiment analysis, such as accuracy, precision, recall, or F1 score.

The importance of clear, specific objectives cannot be overstated. These objectives provide a clear roadmap and direction for your research, guiding your efforts and ensuring that you stay on track. They help you structure your research activities, allocate resources effectively, and measure progress along the way.

Using action verbs to articulate objectives effectively is another crucial aspect. Action verbs convey specific actions or achievements that need to be accomplished. They provide clarity and precision, leaving no room for ambiguity. For example:

By using action verbs, you explicitly state what needs to be done or achieved in each objective, making it easier to track progress and assess the completion of objectives.

In summary, developing specific objectives involves breaking down the overarching aim into smaller, measurable objectives. Clear and specific objectives provide a roadmap for your research and guide the entire research process. By using action verbs, you articulate objectives effectively, leaving no room for ambiguity. These objectives help structure your research activities, allocate resources effectively, and measure progress, ultimately leading to the successful completion of your research.

When formulating objectives for your research, it is essential to ensure that they align with the research questions you have formulated. Each objective should contribute to addressing or answering a specific research question, creating a cohesive and focused research framework.

Example: Suppose your research in computer science focuses on developing an automated system for detecting and preventing cybersecurity threats. Here are examples of objectives aligned with research questions:

Research Question: How can machine learning algorithms be utilized to detect and mitigate cybersecurity threats effectively?

Objective 1: Evaluate and compare different machine learning algorithms for cybersecurity threat detection.

• Description: Explore and assess various machine learning algorithms, such as decision trees, random forests, or neural networks, to identify the most suitable approach for detecting cybersecurity threats accurately and efficiently.

Objective 2: Develop a dataset representative of diverse cybersecurity threats.

• Description: Create a comprehensive dataset containing various types of cybersecurity threats, including malware, phishing attacks, and network intrusions, to train and evaluate the machine learning models effectively.

Research Question: What are the key challenges and vulnerabilities in existing cybersecurity systems that need to be addressed?

Objective 3: Conduct a systematic analysis of existing cybersecurity systems and identify vulnerabilities.

• Description: Analyze and evaluate existing cybersecurity systems, such as intrusion detection systems or antivirus software, to identify vulnerabilities, weaknesses, and potential areas of improvement that can inform the development of a more robust automated system.

Objective 4: Propose novel techniques to enhance the resilience of the cybersecurity system.

• Description: Develop innovative approaches, such as anomaly detection algorithms or behavior-based analysis techniques, to enhance the resilience of the automated cybersecurity system and address the identified vulnerabilities.

By aligning the objectives with the research questions, you ensure that each objective contributes to addressing a specific aspect of your research. For example, Objective 1 directly addresses the research question regarding the utilization of machine learning algorithms for cybersecurity threat detection. Objective 3 focuses on analyzing existing systems to identify vulnerabilities, which is in line with the question about challenges and vulnerabilities in existing cybersecurity systems.

The alignment between research questions and objectives helps maintain a clear focus on the research objectives and ensures that your efforts are directed towards addressing the research questions. It also enhances the coherence of your research, as each objective becomes a stepping stone towards answering the research questions and achieving the overall aim of your study.

In summary, aligning objectives with research questions is crucial in research. It ensures that each objective contributes to answering or addressing a specific research question, creating a logical and cohesive framework for your study. By establishing this alignment, you can maintain a clear focus on the research objectives and make meaningful contributions to the field.

When setting objectives for your research, it is important to consider their feasibility. Feasibility refers to the realistic achievability of your objectives within the scope of your PhD research, taking into account available resources, time constraints, and other practical limitations.

Example: Suppose your research focuses on developing a new algorithm for real-time video processing and analysis. Here are examples of objectives that consider feasibility:

Objective 1: Implement the real-time video processing algorithm on a high-performance computing cluster.

• Feasibility Considerations: Before setting this objective, assess whether you have access to a high-performance computing cluster and the necessary resources (e.g., hardware, software, computational power) to support the implementation and testing of the algorithm. If such resources are available within your research environment or institution, this objective is feasible.

Objective 2: Collect and annotate a large-scale video dataset for algorithm training and evaluation.

• Feasibility Considerations: Consider the practical aspects of collecting and annotating a large-scale video dataset. Evaluate the time, manpower, and equipment required for this task. Assess whether you have access to the necessary resources (e.g., cameras, storage, annotation tools) and the capability to manage and process such a dataset. If these resources and capabilities are available within your research context, this objective is feasible.

Objective 3: Collaborate with industry partners to obtain real-world video data for testing and validation.

• Feasibility Considerations: Evaluate the feasibility of establishing collaborations with industry partners to obtain real-world video data. Consider factors such as data sharing agreements, legal and privacy considerations, and the willingness of industry partners to provide access to their data. Assess the potential challenges and limitations that may arise during this collaboration process. If such collaborations are feasible and can be established within the constraints of your research, this objective is feasible.

By considering feasibility, you ensure that your objectives are realistically achievable within the resources, time, and other constraints of your PhD research. It helps you avoid setting objectives that are too ambitious or beyond the scope of what you can reasonably accomplish.

Feasibility assessment is crucial in ensuring the successful completion of your research project. It allows you to allocate resources effectively, manage your time, and avoid potential pitfalls or setbacks that could hinder your progress. By setting feasible objectives, you can maintain a practical and manageable research plan that is more likely to lead to meaningful outcomes within the given constraints.

In summary, considering feasibility when setting objectives in computer science research is essential. Assess the available resources, time constraints, and practical limitations to ensure that your objectives are realistically achievable within the scope of your PhD research. By doing so, you can plan and execute your research effectively, making the most of the resources at your disposal and increasing the likelihood of successful outcomes.

Once you have defined your aims and objectives for your research, it’s important to review and refine them to ensure clarity, coherence, and logical flow. This step allows you to make any necessary revisions to ensure that your aims and objectives accurately reflect the scope and purpose of your research.

Example: Suppose your research in computer science focuses on developing a mobile application for enhancing cybersecurity awareness among smartphone users. Here’s an example of reviewing and refining aims and objectives:

Aim: Develop a mobile application for enhancing cybersecurity awareness among smartphone users.

Objective 1: Conduct a comprehensive literature review on cybersecurity awareness strategies and mobile application design principles.

• Review and Refinement: Upon review, you find that the objective is clear and aligned with the aim. However, you decide to refine it to include specific aspects you intend to cover in the literature review, such as user education techniques, persuasive design elements, and existing cybersecurity awareness mobile applications.

Objective 2: Design and develop a user-friendly mobile application prototype that delivers educational content and interactive features.

• Review and Refinement: During the review, you realize that the objective lacks specificity regarding the educational content and interactive features. You refine it to explicitly mention the inclusion of topics like phishing prevention, password management, and interactive quizzes to reinforce learning.

Objective 3: Conduct usability testing and collect feedback from potential users to evaluate the effectiveness of the mobile application.

• Review and Refinement: While reviewing, you realize that the objective could benefit from additional information. You refine it to include details such as the target user group (e.g., smartphone users aged 18-35), the number of participants you plan to involve in the usability testing, and the specific metrics you will use to evaluate the effectiveness of the application.

By reviewing and refining your aims and objectives, you ensure that they accurately capture the scope and purpose of your research. It helps you identify any gaps, ambiguities, or areas that need further clarification. Through this process, you can enhance the clarity, coherence, and logical flow of your aims and objectives, making them more robust and aligned with your research goals.

Additionally, reviewing and refining your aims and objectives allows you to align them with the current state of knowledge in the field. As you conduct literature reviews and gain more insights into existing research, you may discover the need to make adjustments to your aims and objectives to reflect the most relevant and up-to-date information.

In summary, reviewing and refining aims and objectives in research is essential to ensure clarity, coherence, and logical flow. By carefully reviewing each aim and objective, you can identify areas for improvement, refine them to include specific details, and align them with the current state of knowledge in the field. This process enhances the accuracy and effectiveness of your aims and objectives, providing a strong foundation for your research.

Once you have developed your aims and objectives for your research, it is important to seek feedback from your supervisor or peers. Sharing your aims and objectives with others allows you to gather valuable insights, suggestions, and perspectives that can help refine and improve your objectives, ensuring they are appropriate and aligned with your research.

Imagine you have formulated the following objectives for your computer science research on developing an intelligent tutoring system:

Objective 1: Conduct a literature review on existing intelligent tutoring systems and their effectiveness in enhancing student learning outcomes.

Objective 2: Design and develop an adaptive learning algorithm to personalize the tutoring experience based on individual student needs.

Objective 3: Implement a user-friendly interface for the intelligent tutoring system that provides an intuitive and engaging learning environment.

Objective 4: Evaluate the effectiveness of the developed intelligent tutoring system through a series of user studies and compare it with traditional tutoring methods.

At this stage, it would be beneficial to share your aims and objectives with your supervisor or peers to receive feedback. They can provide valuable insights and suggestions to help you refine and improve your objectives. For example:

• Your supervisor may suggest including a specific research question to further clarify the focus of Objective 1, such as “What are the key features and techniques used in successful intelligent tutoring systems?”
• Peers may provide feedback on the clarity and specificity of Objective 2, suggesting adding details on the specific adaptability mechanisms to be incorporated.
• Your supervisor might suggest considering the inclusion of usability testing as part of Objective 3 to ensure the interface meets the needs and preferences of the target users.
• Peers may offer suggestions on additional evaluation metrics or experimental setups to strengthen Objective 4 and provide more robust comparisons.

By seeking feedback, you open yourself up to constructive criticism and valuable perspectives that can help enhance the quality and effectiveness of your aims and objectives. Feedback from experienced researchers or knowledgeable peers can help you identify any potential gaps or weaknesses in your objectives and provide suggestions for improvement.

Remember that feedback is an iterative process, and it is important to carefully consider the suggestions provided while also critically evaluating them in the context of your research. Incorporating constructive feedback will help you refine your aims and objectives, ensuring they are robust, relevant, and aligned with your research goals.

In summary, seeking feedback on your aims and objectives is a valuable step in the process of developing your research. Sharing your objectives with your supervisor or peers allows you to gather insights, suggestions, and perspectives that can help refine and improve your objectives. Feedback helps ensure that your objectives are appropriate, clear, and aligned with your research goals, ultimately strengthening the overall quality of your research.

When writing your dissertation, it is crucial to properly document and present your aims and objectives. The placement and presentation of aims and objectives play a significant role in providing readers with a clear understanding of the research’s purpose and direction.

Placement: The aims and objectives of your research should be presented early on in your dissertation, typically within the introduction chapter. This allows readers to grasp the overall scope and intent of your research from the beginning. Placing them in the introduction helps set the context and provides a roadmap for the rest of the dissertation.

Presentation: When presenting aims and objectives, it is important to clearly distinguish between the two and articulate their role in driving the research. Here’s an example of how you can document aims and objectives:

Aims: Start by presenting the overarching aim of your research, which represents the primary goal or intention of your study. It should be a concise statement that captures the essence of your research focus.

For example:

Aim: The aim of this research is to develop a machine learning-based system for automated sentiment analysis in social media data.

Objectives: Following the aim, present a list of specific objectives that outline the key steps or milestones required to achieve the aim. Each objective should be clear, specific, and measurable. Here’s an example:

Objectives:

• Analyze existing sentiment analysis techniques and methodologies in the literature to identify their limitations and challenges.
• Collect and preprocess a large dataset of social media posts to serve as the training and evaluation data for the sentiment analysis system.
• Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.
• Evaluate the performance of the developed sentiment analysis system against existing state-of-the-art approaches, using appropriate evaluation metrics.
• Optimize the system for scalability and efficiency, allowing it to handle large volumes of real-time social media data.

By clearly documenting the aims and objectives in your dissertation, you provide readers with a clear understanding of the purpose and direction of your research. This enables them to follow your thought process and evaluate the relevance and significance of your study. Aims and objectives serve as guideposts that help readers navigate through your dissertation and understand the specific research questions you seek to address.

Moreover, the well-documented aims and objectives help you maintain focus throughout your research journey and provide a framework for organizing your dissertation. They establish the foundation upon which your methodology, analysis, and conclusions are built.

In summary, when documenting aims and objectives in a dissertation, it is important to place them in the introduction chapter and clearly present their role in guiding the research. Aims and objectives should be distinct, with the aim of capturing the overarching goal and the objectives outlining the specific steps or milestones to achieve it. By effectively documenting aims and objectives, you provide readers with a clear understanding of the research’s purpose and direction, facilitating their engagement with your work.

Crafting clear and well-defined aims and objectives is a critical aspect of writing a PhD or Post Graduate dissertation. These aims and objectives provide a solid foundation for your research, guiding your efforts and ensuring a focused and coherent study. Through this discussion, we have explored the importance of aims and objectives in a PhD dissertation and how they contribute to the research process.

Upcoming Events

• Visit the Upcoming International Conferences at Exotic Travel Destinations with Travel Plan
• Visit for  Research Internships Worldwide

Recent Posts

• EditPad Research Title Generator: Is It Helpful to Create a Title for Your Research?
• Are Postdoctoral Fellowships Taxable? A Guide to Understanding Tax Implications
• How to Get Off-Cycle Research/Academic Internships
• How to End Your Academic/Research Internship?
• PhD or Industry Job? A Comprehensive Career Guide
• All Blog Posts
• Research Career
• Research Conference
• Research Internship
• Research Journal
• Research Tools
• Uncategorized
• Research Conferences
• Research Journals
• Research Grants
• Internships
• Research Internships
• Email Templates
• Conferences
• Blog Partners
• Privacy Policy

Copyright © 2024 Research Voyage

Design by ThemesDNA.com

• How it works

How to Write the Dissertation Aims and Objectives – Guide & Examples

Published by Grace Graffin at January 27th, 2023 , Revised On October 9, 2023

Aims and objectives are among the essential aspects of a dissertation. If you write aims and objectives effectively, they can act as a foundation to give your research clarity and focus.

This article will provide you with all the necessary information regarding aims and objectives, their differences, writing tips , and the common mistakes you should avoid while writing them.

The aim is often a single sentence or a short paragraph that describes your dissertation’s main goal and intent. It tells what you hope to achieve at the end. You should write the aim so that it becomes identifiable when it is achieved with the completion of your dissertation .

The aim is written in a subsection of the introduction to clarify the overall purpose of the dissertation .

Example: It is often observed that employees in culturally diverse workplaces struggle to work effectively in a team. A probable cause of this issue is bullying at the workplace. This research investigates the impact of bullying on employee job satisfaction at culturally diverse workplaces and the resulting loss of employee productivity. This research will use surveys and case study analysis to analyze the impact of bullying on employees.

The objectives in a dissertation describe the ways through which you intend to achieve the research aim. They are specific statements that break down the aim into several smaller key sections of the overall research. Suitable objectives can help you stay focused and conduct research in the direction of your aim.

The number of objectives should be realistic; usually, between three to six, and each one should be possible to achieve. The following example shows the objectives for the previously-mentioned dissertation aim.

1. identification of the behaviors that are considered as bullying 2. exploring the factors that cause bullying at a culturally diverse workplace 3. analyzing the relationship between bullying and job satisfaction of employees 4. providing suitable recommendations on minimizing the bullying at the workplace

The objectives of a dissertation should be SMART.

• Specific: should be precise, focused, and well-defined
• Measurable: the progress should be measurable, and you should be able to determine when you have achieved an objective.
• Achievable: you should be able to carry out the required action within your available resources
• Relevant: should be related to the dissertation aim
• Time-bound: should be possible within the available time

Differences between aims and objectives

Aims and objectives are often mixed, but there are clear differences between them.

Hire an Expert Writer

Orders completed by our expert writers are

• Formally drafted in an academic style
• Free Amendments and 100% Plagiarism Free – or your money back!
• 100% Confidential and Timely Delivery!
• Free anti-plagiarism report
• Appreciated by thousands of clients. Check client reviews

How to write aims and objectives?

There is no particular way or standard to write the aims and objectives. Different researchers have different writing styles, and often it can be influenced by your research supervisor. However, you should follow certain basic principles while writing aims and objectives in a dissertation.

Writing the aim statement

The aim statement should cover the following essential elements.

• Why is the research necessary? (covers the underlying problem on which the study is to be conducted)
• What is the research about? (description of the research title)
• How are you going to conduct it? (a brief statement of intended research methods)

An appropriate aim clearly defines the research purpose without confusing the reader. If you struggle to explain your research and its importance in simpler terms, you should consider refining your research to clarify it further.

Writing objectives

The objectives describe how you would achieve your research aim. You can do this through the following steps,

• The first one to two objectives can be applied to the literature review . (Verbs to be used: investigate, examine, study)
• One objective can be applied to the methodology portion. (Verbs to be used: collect, select, demonstrate, estimate)
• Two to three objectives can cover the critical evaluation or discussion chapters (Verbs to be used: analyze, compare, evaluate)
• The final objective will cover the conclusion or recommendation portion. (Verbs to be used: conclude, recommend)

Instead of writing like a paragraph, the objectives should be written as a numbered list to give them more clarity.

How many aims and objectives should be there?

It depends upon the topic of your research and mainly upon your supervisor’s requirements. Generally, a dissertation has a single broad statement as the research aim. However, it is acceptable to include a main aim along with two to three subsidiary aims.

Similarly, the number of objectives should be realistic and sufficient to measure the progress regarding the achievement of the research aim. Their number can generally vary from three to six depending upon the aim.

Common mistakes to avoid while writing research aims and objectives

• Writing a broad research aim

Writing a broad research aim is a common mistake, and it often becomes difficult to achieve. It may create a problem when you are asked to prove how you have achieved your aims during your  viva defense . It would be best to narrow your study to a specific area in the early stages of the dissertation.

• Formulating overlapping research objectives

The objectives should be written such that they are measurable and distinct from each other. If they overlap, it makes it difficult to structure your dissertation properly in specific chapters.

• Setting unrealistic aims

Students often get over-ambitious while describing the research aim and face problems afterward in achieving those aims. You should avoid this mistake and be realistic about what you can achieve in the available time and resources.

Aims and objectives are the sections that require significant time and attention to avoid future hassles while conducting research and writing your dissertation.

Frequently Asked Questions

How to set dissertation aims and objectives.

To set dissertation aims and objectives, define your research goals clearly. Aims state what you want to achieve, while objectives outline specific, measurable steps to reach those goals. Ensure they align with your research question and contribute to your study’s significance.

You May Also Like

What are the key factors influencing language development and what can do to accelerate the process of language acquisition? Here is all you need to know!

Achieving a 95% on your dissertation? We reveal insider tips & discuss if it’s even possible. Aim for dissertation excellence!

Here are a few ways you can make use of online social media networks for gathering data and conducting research for your dissertation project.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

How to Write Research Objectives

3-minute read

• 22nd November 2021

Writing a research paper, thesis, or dissertation ? If so, you’ll want to state your research objectives in the introduction of your paper to make it clear to your readers what you’re trying to accomplish. But how do you write effective research objectives? In this post, we’ll look at two key topics to help you do this:

• How to use your research aims as a basis for developing objectives.
• How to use SMART criteria to refine your research objectives.

For more advice on how to write strong research objectives, see below.

Research Aims and Objectives

There is an important difference between research aims and research objectives:

• A research aim defines the main purpose of your research. As such, you can think of your research aim as answering the question “What are you doing?”
• Research objectives (as most studies will have more than one) are the steps you will take to fulfil your aims. As such, your objectives should answer the question “How are you conducting your research?”

For instance, an example research aim could be:

This study will investigate the link between dehydration and the incidence of urinary tract infections (UTIs) in intensive care patients in Australia.

To develop a set of research objectives, you would then break down the various steps involved in meeting said aim. For example:

This study will investigate the link between dehydration and the incidence of urinary tract infections (UTIs) in intensive care patients in Australia. To achieve this, the study objectives w ill include:

• Replicat ing a small Singaporean study into the role of dehydration in UTIs in hospital patients (Sepe, 2018) in a larger Australian cohort.
• Trialing the use of intravenous fluids for intensive care patients to prevent dehydration.
• Assessing the relationship between the age of patients and quantities of intravenous fluids needed to counter dehydration.

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

Note that the objectives don’t go into any great detail here. The key is to briefly summarize each component of your study. You can save details for how you will conduct the research for the methodology section of your paper.

Make Your Research Objectives SMART

A great way to refine your research objectives is to use SMART criteria . Borrowed from the world of project management, there are many versions of this system. However, we’re going to focus on developing specific, measurable, achievable, relevant, and timebound objectives.

In other words, a good research objective should be all of the following:

• S pecific – Is the objective clear and well-defined?
• M easurable – How will you know when the objective has been achieved? Is there a way to measure the thing you’re seeking to do?
• A chievable – Do you have the support and resources necessary to undertake this action? Are you being overly ambitious with this objective?
• R elevant – Is this objective vital for fulfilling your research aim?
• T imebound – Can this action be realistically undertaken in the time you have?

If you follow this system, your research objectives will be much stronger.

Expert Research Proofreading

Whatever your research aims and objectives, make sure to have your academic writing proofread by the experts!

Our academic editors can help you with research papers and proposals , as well as any other scholarly document you need checking. And this will help to ensure that your academic writing is always clear, concise, and precise.

Submit a free sample document today to trial our services and find out more.

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

9-minute read

How to Use Infographics to Boost Your Presentation

Is your content getting noticed? Capturing and maintaining an audience’s attention is a challenge when...

8-minute read

Why Interactive PDFs Are Better for Engagement

Are you looking to enhance engagement and captivate your audience through your professional documents? Interactive...

7-minute read

Seven Key Strategies for Voice Search Optimization

Voice search optimization is rapidly shaping the digital landscape, requiring content professionals to adapt their...

4-minute read

Five Creative Ways to Showcase Your Digital Portfolio

Are you a creative freelancer looking to make a lasting impression on potential clients or...

How to Ace Slack Messaging for Contractors and Freelancers

Effective professional communication is an important skill for contractors and freelancers navigating remote work environments....

How to Insert a Text Box in a Google Doc

Google Docs is a powerful collaborative tool, and mastering its features can significantly enhance your...

Make sure your writing is the best it can be with our expert English proofreading and editing.

• Manuscript Preparation

Know How to Structure Your PhD Thesis

• 4 minute read
• 34.8K views

Table of Contents

In your academic career, few projects are more important than your PhD thesis. Unfortunately, many university professors and advisors assume that their students know how to structure a PhD. Books have literally been written on the subject, but there’s no need to read a book in order to know about PhD thesis paper format and structure. With that said, however, it’s important to understand that your PhD thesis format requirement may not be the same as another student’s. The bottom line is that how to structure a PhD thesis often depends on your university and department guidelines.

But, let’s take a look at a general PhD thesis format. We’ll look at the main sections, and how to connect them to each other. We’ll also examine different hints and tips for each of the sections. As you read through this toolkit, compare it to published PhD theses in your area of study to see how a real-life example looks.

Main Sections of a PhD Thesis

In almost every PhD thesis or dissertation, there are standard sections. Of course, some of these may differ, depending on your university or department requirements, as well as your topic of study, but this will give you a good idea of the basic components of a PhD thesis format.

• Abstract : The abstract is a brief summary that quickly outlines your research, touches on each of the main sections of your thesis, and clearly outlines your contribution to the field by way of your PhD thesis. Even though the abstract is very short, similar to what you’ve seen in published research articles, its impact shouldn’t be underestimated. The abstract is there to answer the most important question to the reviewer. “Why is this important?”
• Introduction : In this section, you help the reviewer understand your entire dissertation, including what your paper is about, why it’s important to the field, a brief description of your methodology, and how your research and the thesis are laid out. Think of your introduction as an expansion of your abstract.
• Literature Review : Within the literature review, you are making a case for your new research by telling the story of the work that’s already been done. You’ll cover a bit about the history of the topic at hand, and how your study fits into the present and future.
• Theory Framework : Here, you explain assumptions related to your study. Here you’re explaining to the review what theoretical concepts you might have used in your research, how it relates to existing knowledge and ideas.
• Methods : This section of a PhD thesis is typically the most detailed and descriptive, depending of course on your research design. Here you’ll discuss the specific techniques you used to get the information you were looking for, in addition to how those methods are relevant and appropriate, as well as how you specifically used each method described.
• Results : Here you present your empirical findings. This section is sometimes also called the “empiracles” chapter. This section is usually pretty straightforward and technical, and full of details. Don’t shortcut this chapter.
• Discussion : This can be a tricky chapter, because it’s where you want to show the reviewer that you know what you’re talking about. You need to speak as a PhD versus a student. The discussion chapter is similar to the empirical/results chapter, but you’re building on those results to push the new information that you learned, prior to making your conclusion.
• Conclusion : Here, you take a step back and reflect on what your original goals and intentions for the research were. You’ll outline them in context of your new findings and expertise.

Tips for your PhD Thesis Format

As you put together your PhD thesis, it’s easy to get a little overwhelmed. Here are some tips that might keep you on track.

• Don’t try to write your PhD as a first-draft. Every great masterwork has typically been edited, and edited, and…edited.
• Work with your thesis supervisor to plan the structure and format of your PhD thesis. Be prepared to rewrite each section, as you work out rough drafts. Don’t get discouraged by this process. It’s typical.
• Make your writing interesting. Academic writing has a reputation of being very dry.
• You don’t have to necessarily work on the chapters and sections outlined above in chronological order. Work on each section as things come up, and while your work on that section is relevant to what you’re doing.
• Don’t rush things. Write a first draft, and leave it for a few days, so you can come back to it with a more critical take. Look at it objectively and carefully grammatical errors, clarity, logic and flow.
• Know what style your references need to be in, and utilize tools out there to organize them in the required format.
• It’s easier to accidentally plagiarize than you think. Make sure you’re referencing appropriately, and check your document for inadvertent plagiarism throughout your writing process.

PhD Thesis Editing Plus

Want some support during your PhD writing process? Our PhD Thesis Editing Plus service includes extensive and detailed editing of your thesis to improve the flow and quality of your writing. Unlimited editing support for guaranteed results. Learn more here , and get started today!

• Publication Process

Journal Acceptance Rates: Everything You Need to Know

• Publication Recognition

How to Make a PowerPoint Presentation of Your Research Paper

You may also like.

Make Hook, Line, and Sinker: The Art of Crafting Engaging Introductions

Can Describing Study Limitations Improve the Quality of Your Paper?

A Guide to Crafting Shorter, Impactful Sentences in Academic Writing

6 Steps to Write an Excellent Discussion in Your Manuscript

How to Write Clear and Crisp Civil Engineering Papers? Here are 5 Key Tips to Consider

The Clear Path to An Impactful Paper: ②

The Essentials of Writing to Communicate Research in Medicine

Changing Lines: Sentence Patterns in Academic Writing

Input your search keywords and press Enter.

Our website uses tracking cookies. By clicking "accept" you give your permission to this website to use tracking cookies.

Click here for our privacy and cookie policy Accept Deny

• Search Working at TU/e
• Academic Perspectives
• Irène Curie Fellowship
• Professional Development
• Scientific Staff Vacancies
• Support Staff Vacancies
• Compensation and benefits
• Application process
• Support for internationals

Working at TU/e

Phd on wellbeing and justice implications of innovations and transitions, job description.

Are you fascinated by the question of how we can transition to a circular and sustainable society without creating further damage and injustice? And are you interested in quantifying a range of environmental effects? This PhD project develops improved methods to include future developments and justice aspects into environmental impact assessment methods and applies them to real-world challenges. The research takes place in a multidisciplinary research group, involving social and natural scientists as well as humanities scholars, with a focus to work on sustainability transitions.  

You will do research on prospective impact assessment for just transitions, centered around the question:  

How can we estimate prospective impacts of environmental damage on human health and justice? As a first example we will quantify impacts caused by air pollution related to circular innovations and transition pathways. 

Current methods, like LCA, can assess the sustainability of value chains, business models or behavior. Although they are increasingly capable to take into account future characteristics of emerging technologies and circularity strategies, impact assessment methods are generally lagging behind. Moreover, while many assessment methods focus on environmental or social damages, justice implications of these damages are hardly addressed, let alone quantified. The objective of the PhD project is to develop and apply methods to assess the prospective impacts of environmental pollution on human health impacts and the justice implications of innovations and transition pathways. To achieve this goal you will derive indicators for footprint assessment, work with natural science based environmental models, prospective LCA and/or input-output analysis as well as the justice literature and just sustainability transition concepts. This PhD position is part of the Dutch stimulation program ‘Sectorplannen Bètawetenschappen 2023 (BÈTA II) focus point ‘circulariteit en duurzaamheidstransities’.  

The Technology, Innovation, and Society (TIS) group at Eindhoven University of Technology straddles natural science, social science and humanities disciplines and provides a stimulating and collaborative environment. The TIS group is part of the Department of Industrial Engineering & Innovation Sciences (IE&IS). Research at TIS concerns how humans and societies bring about technological change, and how technological innovations change society. With ~25 tenured staff and a large group of postdocs and PhD candidates, researchers in the TIS group try to bridge the engineering and social sciences in a systems perspective on sustainability transitions. The TIS staff teaches in the BSc program 'Sustainable Innovation', the MSc programs ‘Sustainable Energy Technologies’ and 'Innovation Management’, and in university-wide programs for engineers. 

Job requirements

• A master’s degree (or an equivalent university degree) in natural, engineering or innovation sciences (for instance but not restricted to Industrial Engineering, Innovation Science, Environmental Science)  
• A clear affinity with environmental topics. 
• A research-oriented attitude.  
• Eagerness to engage with social sciences and humanities.  
• Affinity with working with models. 
• Fluent in spoken and written English (C1 level).  

Conditions of employment

international network. You will work on a modern, green campus, close to the city center and with great public transport and cycling facilities. In addition, we offer: 

• Full-time employment for four years, with an intermediate evaluation (go/no-go) after nine months. You will spend 10% of your employment on teaching tasks.  
• Salary and great benefits (such as a pension scheme and attractive leave conditions for (prospective) parents)  in accordance with the Collective Labour Agreement for Dutch Universities, scale P (min. €2,770, max. €3,539).  
• A year-end bonus of 8.3% and annual vacation pay of 8%. 
• High-quality training programs and other support to grow into a self-aware, autonomous scientific researcher. At TU/e we challenge you to take charge of your own learning process . 
• An excellent technical infrastructure, on-campus daycare and sports facilities.  
• An allowance for commuting, working from home and internet costs. 
• A Staff Immigration Team and a tax compensation scheme for international candidates. 

Information and application

About us    Eindhoven University of Technology is an internationally top-ranking university in the Netherlands that combines scientific curiosity with a hands-on attitude. Our spirit of collaboration translates into an open culture and a top-five position in collaborating with advanced industries. Fundamental knowledge enables us to design solutions for the highly complex problems of today and tomorrow.   

Information    Do you recognize yourself in this profile and would you like to know more? You can contact the daily supervisor for this position dr. Mara Hauck ( [email protected] ). Prof. dr. Heleen de Coninck is the supervisor to award the doctoral degree. Cooperation with Dr. Johanna Höffken, Prof. dr. Mark Huijbregts (Radboud University) and prof. dr. Martijn Schaap (TNO) are expected and encouraged.   Visit our website for more information about the application process or the conditions of employment. Please contact the hiring manager Hanneke Huijs-Palmen ( [email protected] )  Are you inspired and would like to know more about working at TU/e? Please visit https://www.tue.nl/en/working-at-tue/scientific-staff . 

Application   We invite you to submit a complete application by using the apply button. The application should include a: 

• Cover letter in which you describe your motivation to apply and qualifications for the position. Why you want to work with us, and why we would want you.  
• Curriculum vitae, including a list of any publications, grades for your MSc and BSc thesis, and the contact information of three references. 

We look forward to receiving your application. The vacancy will remain open until May 31st. Interviews will be held in week 25 (online).