what is an abstract thesis

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

• Features for Creative Writers
• Features for Work
• Features for Higher Education
• Features for Teachers
• Features for Non-Native Speakers
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Get started with ProWritingAid

Drop us a line or let's stay in touch via :

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

19 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Nicely explained. Very simple to understand. Thank you!

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 412 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 3. The Abstract
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

An abstract summarizes, usually in one paragraph of 300 words or less, the major aspects of the entire paper in a prescribed sequence that includes: 1) the overall purpose of the study and the research problem(s) you investigated; 2) the basic design of the study; 3) major findings or trends found as a result of your analysis; and, 4) a brief summary of your interpretations and conclusions.

Writing an Abstract. The Writing Center. Clarion University, 2009; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century . Oxford, UK: Chandos Publishing, 2010;

Importance of a Good Abstract

Sometimes your professor will ask you to include an abstract, or general summary of your work, with your research paper. The abstract allows you to elaborate upon each major aspect of the paper and helps readers decide whether they want to read the rest of the paper. Therefore, enough key information [e.g., summary results, observations, trends, etc.] must be included to make the abstract useful to someone who may want to examine your work.

How do you know when you have enough information in your abstract? A simple rule-of-thumb is to imagine that you are another researcher doing a similar study. Then ask yourself: if your abstract was the only part of the paper you could access, would you be happy with the amount of information presented there? Does it tell the whole story about your study? If the answer is "no" then the abstract likely needs to be revised.

Farkas, David K. “A Scheme for Understanding and Writing Summaries.” Technical Communication 67 (August 2020): 45-60;  How to Write a Research Abstract. Office of Undergraduate Research. University of Kentucky; Staiger, David L. “What Today’s Students Need to Know about Writing Abstracts.” International Journal of Business Communication January 3 (1966): 29-33; Swales, John M. and Christine B. Feak. Abstracts and the Writing of Abstracts . Ann Arbor, MI: University of Michigan Press, 2009.

Structure and Writing Style

I.  Types of Abstracts

To begin, you need to determine which type of abstract you should include with your paper. There are four general types.

Critical Abstract A critical abstract provides, in addition to describing main findings and information, a judgment or comment about the study’s validity, reliability, or completeness. The researcher evaluates the paper and often compares it with other works on the same subject. Critical abstracts are generally 400-500 words in length due to the additional interpretive commentary. These types of abstracts are used infrequently.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarized. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less. Informative Abstract The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Highlight Abstract A highlight abstract is specifically written to attract the reader’s attention to the study. No pretense is made of there being either a balanced or complete picture of the paper and, in fact, incomplete and leading remarks may be used to spark the reader’s interest. In that a highlight abstract cannot stand independent of its associated article, it is not a true abstract and, therefore, rarely used in academic writing.

II.  Writing Style

Use the active voice when possible , but note that much of your abstract may require passive sentence constructions. Regardless, write your abstract using concise, but complete, sentences. Get to the point quickly and always use the past tense because you are reporting on a study that has been completed.

Abstracts should be formatted as a single paragraph in a block format and with no paragraph indentations. In most cases, the abstract page immediately follows the title page. Do not number the page. Rules set forth in writing manual vary but, in general, you should center the word "Abstract" at the top of the page with double spacing between the heading and the abstract. The final sentences of an abstract concisely summarize your study’s conclusions, implications, or applications to practice and, if appropriate, can be followed by a statement about the need for additional research revealed from the findings.

Composing Your Abstract

Although it is the first section of your paper, the abstract should be written last since it will summarize the contents of your entire paper. A good strategy to begin composing your abstract is to take whole sentences or key phrases from each section of the paper and put them in a sequence that summarizes the contents. Then revise or add connecting phrases or words to make the narrative flow clearly and smoothly. Note that statistical findings should be reported parenthetically [i.e., written in parentheses].

Before handing in your final paper, check to make sure that the information in the abstract completely agrees with what you have written in the paper. Think of the abstract as a sequential set of complete sentences describing the most crucial information using the fewest necessary words. The abstract SHOULD NOT contain:

• A catchy introductory phrase, provocative quote, or other device to grab the reader's attention,
• Lengthy background or contextual information,
• Redundant phrases, unnecessary adverbs and adjectives, and repetitive information;
• Acronyms or abbreviations,
• References to other literature [say something like, "current research shows that..." or "studies have indicated..."],
• Using ellipticals [i.e., ending with "..."] or incomplete sentences,
• Jargon or terms that may be confusing to the reader,
• Citations to other works, and
• Any sort of image, illustration, figure, or table, or references to them.

Abstract. Writing Center. University of Kansas; Abstract. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Abstracts. The Writing Center. University of North Carolina; Borko, Harold and Seymour Chatman. "Criteria for Acceptable Abstracts: A Survey of Abstracters' Instructions." American Documentation 14 (April 1963): 149-160; Abstracts. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Hartley, James and Lucy Betts. "Common Weaknesses in Traditional Abstracts in the Social Sciences." Journal of the American Society for Information Science and Technology 60 (October 2009): 2010-2018; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century. Oxford, UK: Chandos Publishing, 2010; Procter, Margaret. The Abstract. University College Writing Centre. University of Toronto; Riordan, Laura. “Mastering the Art of Abstracts.” The Journal of the American Osteopathic Association 115 (January 2015 ): 41-47; Writing Report Abstracts. The Writing Lab and The OWL. Purdue University; Writing Abstracts. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-First Century . Oxford, UK: 2010; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison.

Writing Tip

Never Cite Just the Abstract!

Citing to just a journal article's abstract does not confirm for the reader that you have conducted a thorough or reliable review of the literature. If the full-text is not available, go to the USC Libraries main page and enter the title of the article [NOT the title of the journal]. If the Libraries have a subscription to the journal, the article should appear with a link to the full-text or to the journal publisher page where you can get the article. If the article does not appear, try searching Google Scholar using the link on the USC Libraries main page. If you still can't find the article after doing this, contact a librarian or you can request it from our free i nterlibrary loan and document delivery service .

• << Previous: Research Process Video Series
• Next: Executive Summary >>
• Last Updated: May 22, 2024 12:03 PM
• URL: https://libguides.usc.edu/writingguide

• Walden University
• Faculty Portal

Writing for Publication: Abstracts

An abstract is "a brief, comprehensive summary of the contents of the paper" (American Psychological Association [APA], 2020, p. 38). This summary is intended to share the topic, argument, and conclusions of a research study or course paper, similar to the text on the back cover of a book. When submitting your work for publication, an abstract is often the first piece of your writing a reviewer will encounter. An abstract may not be required for course papers.

Read on for more tips on making a good first impression with a successful abstract.

An abstract is a single paragraph preceded by the heading " Abstract ," centered and in bold font. The abstract does not begin with an indented line. APA (2020) recommends that abstracts should generally be less than 250 words, though many journals have their own word limits; it is always a good idea to check journal-specific requirements before submitting. The Writing Center's APA templates are great resources for visual examples of abstracts.

Abstracts use the present tense to describe currently applicable results (e.g., "Results indicate...") and the past tense to describe research steps (e.g., "The survey measured..."), and they do not typically include citations.

Key terms are sometimes included at the end of the abstract and should be chosen by considering the words or phrases that a reader might use to search for your article.

An abstract should include information such as

• The problem or central argument of your article
• A brief exposition of research design, methods, and procedures.
• A brief summary of your findings
• A brief summary of the implications of the research on practice and theory

It is also appropriate, depending on the type of article you are writing, to include information such as:

• Participant number and type
• Study eligibility criteria
• Limitations of your study
• Implications of your study's conclusions or areas for additional research

Your abstract should avoid unnecessary wordiness and focus on quickly and concisely summarizing the major points of your work. An abstract is not an introduction; you are not trying to capture the reader's attention with timeliness or to orient the reader to the entire background of your study. When readers finish reading your abstract, they should have a strong sense of your article's purpose, approach, and conclusions. The Walden Office of Research and Doctoral Services has additional  tutorial material on abstracts .

Clinical or Empirical Study Abstract Exemplar

In the following abstract, the article's problem is stated in red , the approach and design are in blue , and the results are in green .

End-stage renal disease (ESRD) patients have a high cardiovascular mortality rate. Precise estimates of the prevalence, risk factors and prognosis of different manifestations of cardiac disease are unavailable. In this study a prospective cohort of 433 ESRD patients was followed from the start of ESRD therapy for a mean of 41 months. Baseline clinical assessment and echocardiography were performed on all patients.  The major outcome measure was death while on dialysis therapy. Clinical manifestations of cardiovascular disease were highly prevalent at the start of ESRD therapy: 14% had coronary artery disease, 19% angina pectoris, 31% cardiac failure, 7% dysrhythmia and 8% peripheral vascular disease. On echocardiography 15% had systolic dysfunction, 32% left ventricular dilatation and 74% left ventricular hypertrophy. The overall median survival time was 50 months. Age, diabetes mellitus, cardiac failure, peripheral vascular disease and systolic dysfunction independently predicted death in all time frames. Coronary artery disease was associated with a worse prognosis in patients with cardiac failure at baseline. High left ventricular cavity volume and mass index were independently associated with death after two years. The independent associations of the different echocardiographic abnormalities were: systolic dysfunction--older age and coronary artery disease; left ventricular dilatation--male gender, anemia, hypocalcemia and hyperphosphatemia; left ventricular hypertrophy--older age, female gender, wide arterial pulse pressure, low blood urea and hypoalbuminemia. We conclude that clinical and echocardiographic cardiovascular disease are already present in a very high proportion of patients starting ESRD therapy and are independent mortality factors.

Foley, R. N., Parfrey, P. S., Harnett, J. D., Kent, G. M., Martin, C. J., Murray, D. C., & Barre, P. E. (1995). Clinical and echocardiographic disease in patients starting end-stage renal disease therapy. Kidney International , 47 , 186–192. https://doi.org/10.1038/ki.1995.22

Literature Review Abstract Exemplar

In the following abstract, the purpose and scope of the literature review are in red , the specific span of topics is in blue , and the implications for further research are in green .

This paper provides a review of research into the relationships between psychological types, as measured by the Myers-Briggs Type Indicator (MBTI), and managerial attributes, behaviors and effectiveness. The literature review includes an examination of the psychometric properties of the MBTI and the contributions and limitations of research on psychological types. Next, key findings are discussed and used to advance propositions that relate psychological type to diverse topics such as risk tolerance, problem solving, information systems design, conflict management and leadership. We conclude with a research agenda that advocates: (a) the exploration of potential psychometric refinements of the MBTI, (b) more rigorous research designs, and (c) a broadening of the scope of managerial research into type.

Gardner, W. L., & Martinko, M. J. (1996). Using the Myers-Briggs Type Indicator to study managers: A literature review and research agenda. Journal of Management, 22 (1), 45–83. https://doi.org/10.1177/014920639602200103

Didn't find what you need? Email us at [email protected] .

• Previous Page: Cover Letters
• Next Page: Formatting and Editing
• Office of Student Disability Services

Walden Resources

Departments.

• Academic Residencies
• Academic Skills
• Career Planning and Development
• Customer Care Team
• Field Experience
• Military Services
• Student Success Advising
• Writing Skills

Centers and Offices

• Center for Social Change
• Office of Academic Support and Instructional Services
• Office of Degree Acceleration
• Office of Research and Doctoral Services
• Office of Student Affairs

Student Resources

• Doctoral Writing Assessment
• Form & Style Review
• Quick Answers
• ScholarWorks
• SKIL Courses and Workshops
• Walden Bookstore
• Walden Catalog & Student Handbook
• Student Safety/Title IX
• Legal & Consumer Information
• Website Terms and Conditions
• Cookie Policy
• Accessibility
• Accreditation
• State Authorization
• Net Price Calculator
• Contact Walden

Walden University is a member of Adtalem Global Education, Inc. www.adtalem.com Walden University is certified to operate by SCHEV © 2024 Walden University LLC. All rights reserved.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 21 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

How to Write an Abstract APA Format

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

An APA abstract is a brief, comprehensive summary of the contents of an article, research paper, dissertation, or report.

It is written in accordance with the guidelines of the American Psychological Association (APA), which is a widely used format in social and behavioral sciences. 

An APA abstract summarizes, usually in one paragraph of between 150–250 words, the major aspects of a research paper or dissertation in a prescribed sequence that includes:

• The rationale: the overall purpose of the study, providing a clear context for the research undertaken.
• Information regarding the method and participants: including materials/instruments, design, procedure, and data analysis.
• Main findings or trends: effectively highlighting the key outcomes of the hypotheses.
• Interpretations and conclusion(s): solidify the implications of the research.
• Keywords related to the study: assist the paper’s discoverability in academic databases.

The abstract should stand alone, be “self-contained,” and make sense to the reader in isolation from the main article.

The purpose of the abstract is to give the reader a quick overview of the essential information before reading the entire article. The abstract is placed on its own page, directly after the title page and before the main body of the paper.

Although the abstract will appear as the very first part of your paper, it’s good practice to write your abstract after you’ve drafted your full paper, so that you know what you’re summarizing.

Note : This page reflects the latest version of the APA Publication Manual (i.e., APA 7), released in October 2019.

Structure of the Abstract

[NOTE: DO NOT separate the components of the abstract – it should be written as a single paragraph. This section is separated to illustrate the abstract’s structure.]

1) The Rationale

One or two sentences describing the overall purpose of the study and the research problem(s) you investigated. You are basically justifying why this study was conducted.

• What is the importance of the research?
• Why would a reader be interested in the larger work?
• For example, are you filling a gap in previous research or applying new methods to take a fresh look at existing ideas or data?
• Women who are diagnosed with breast cancer can experience an array of psychosocial difficulties; however, social support, particularly from a spouse, has been shown to have a protective function during this time. This study examined the ways in which a woman’s daily mood, pain, and fatigue, and her spouse’s marital satisfaction predict the woman’s report of partner support in the context of breast cancer.
• The current nursing shortage, high hospital nurse job dissatisfaction, and reports of uneven quality of hospital care are not uniquely American phenomena.
• Students with special educational needs and disabilities (SEND) are more likely to exhibit behavioral difficulties than their typically developing peers. The aim of this study was to identify specific risk factors that influence variability in behavior difficulties among individuals with SEND.

2) The Method

Information regarding the participants (number, and population). One or two sentences outlining the method, explaining what was done and how. The method is described in the present tense.

• Pretest data from a larger intervention study and multilevel modeling were used to examine the effects of women’s daily mood, pain, and fatigue and average levels of mood, pain, and fatigue on women’s report of social support received from her partner, as well as how the effects of mood interacted with partners’ marital satisfaction.
• This paper presents reports from 43,000 nurses from more than 700 hospitals in the United States, Canada, England, Scotland, and Germany in 1998–1999.
• The study sample comprised 4,228 students with SEND, aged 5–15, drawn from 305 primary and secondary schools across England. Explanatory variables were measured at the individual and school levels at baseline, along with a teacher-reported measure of behavior difficulties (assessed at baseline and the 18-month follow-up).

3) The Results

One or two sentences indicating the main findings or trends found as a result of your analysis. The results are described in the present or past tense.

• Results show that on days in which women reported higher levels of negative or positive mood, as well as on days they reported more pain and fatigue, they reported receiving more support. Women who, on average, reported higher levels of positive mood tended to report receiving more support than those who, on average, reported lower positive mood. However, average levels of negative mood were not associated with support. Higher average levels of fatigue but not pain were associated with higher support. Finally, women whose husbands reported higher levels of marital satisfaction reported receiving more partner support, but husbands’ marital satisfaction did not moderate the effect of women’s mood on support.
• Nurses in countries with distinctly different healthcare systems report similar shortcomings in their work environments and the quality of hospital care. While the competence of and relation between nurses and physicians appear satisfactory, core problems in work design and workforce management threaten the provision of care.
• Hierarchical linear modeling of data revealed that differences between schools accounted for between 13% (secondary) and 15.4% (primary) of the total variance in the development of students’ behavior difficulties, with the remainder attributable to individual differences. Statistically significant risk markers for these problems across both phases of education were being male, eligibility for free school meals, being identified as a bully, and lower academic achievement. Additional risk markers specific to each phase of education at the individual and school levels are also acknowledged.

4) The Conclusion / Implications

A brief summary of your conclusions and implications of the results, described in the present tense. Explain the results and why the study is important to the reader.

• For example, what changes should be implemented as a result of the findings of the work?
• How does this work add to the body of knowledge on the topic?

Implications of these findings are discussed relative to assisting couples during this difficult time in their lives.

• Resolving these issues, which are amenable to managerial intervention, is essential to preserving patient safety and care of consistently high quality.
• Behavior difficulties are affected by risks across multiple ecological levels. Addressing any one of these potential influences is therefore likely to contribute to the reduction in the problems displayed.

The above examples of abstracts are from the following papers:

Aiken, L. H., Clarke, S. P., Sloane, D. M., Sochalski, J. A., Busse, R., Clarke, H., … & Shamian, J. (2001). Nurses’ reports on hospital care in five countries . Health affairs, 20(3) , 43-53.

Boeding, S. E., Pukay-Martin, N. D., Baucom, D. H., Porter, L. S., Kirby, J. S., Gremore, T. M., & Keefe, F. J. (2014). Couples and breast cancer: Women’s mood and partners’ marital satisfaction predicting support perception . Journal of Family Psychology, 28(5) , 675.

Oldfield, J., Humphrey, N., & Hebron, J. (2017). Risk factors in the development of behavior difficulties among students with special educational needs and disabilities: A multilevel analysis . British journal of educational psychology, 87(2) , 146-169.

5) Keywords

APA style suggests including a list of keywords at the end of the abstract. This is particularly common in academic articles and helps other researchers find your work in databases.

Keywords in an abstract should be selected to help other researchers find your work when searching an online database. These keywords should effectively represent the main topics of your study. Here are some tips for choosing keywords:

Core Concepts: Identify the most important ideas or concepts in your paper. These often include your main research topic, the methods you’ve used, or the theories you’re discussing.

Specificity: Your keywords should be specific to your research. For example, suppose your paper is about the effects of climate change on bird migration patterns in a specific region. In that case, your keywords might include “climate change,” “bird migration,” and the region’s name.

Consistency with Paper: Make sure your keywords are consistent with the terms you’ve used in your paper. For example, if you use the term “adolescent” rather than “teen” in your paper, choose “adolescent” as your keyword, not “teen.”

Jargon and Acronyms: Avoid using too much-specialized jargon or acronyms in your keywords, as these might not be understood or used by all researchers in your field.

Synonyms: Consider including synonyms of your keywords to capture as many relevant searches as possible. For example, if your paper discusses “post-traumatic stress disorder,” you might include “PTSD” as a keyword.

Remember, keywords are a tool for others to find your work, so think about what terms other researchers might use when searching for papers on your topic.

The Abstract SHOULD NOT contain:

Lengthy background or contextual information: The abstract should focus on your research and findings, not general topic background.

Undefined jargon, abbreviations,  or acronyms: The abstract should be accessible to a wide audience, so avoid highly specialized terms without defining them.

Citations: Abstracts typically do not include citations, as they summarize original research.

Incomplete sentences or bulleted lists: The abstract should be a single, coherent paragraph written in complete sentences.

New information not covered in the paper: The abstract should only summarize the paper’s content.

Subjective comments or value judgments: Stick to objective descriptions of your research.

Excessive details on methods or procedures: Keep descriptions of methods brief and focused on main steps.

Speculative or inconclusive statements: The abstract should state the research’s clear findings, not hypotheses or possible interpretations.

• Any illustration, figure, table, or references to them . All visual aids, data, or extensive details should be included in the main body of your paper, not in the abstract. 
• Elliptical or incomplete sentences should be avoided in an abstract . The use of ellipses (…), which could indicate incomplete thoughts or omitted text, is not appropriate in an abstract.

APA Style for Abstracts

An APA abstract must be formatted as follows:

Include the running head aligned to the left at the top of the page (professional papers only) and page number. Note, student papers do not require a running head. On the first line, center the heading “Abstract” and bold (do not underlined or italicize). Do not indent the single abstract paragraph (which begins one line below the section title). Double-space the text. Use Times New Roman font in 12 pt. Set one-inch (or 2.54 cm) margins. If you include a “keywords” section at the end of the abstract, indent the first line and italicize the word “Keywords” while leaving the keywords themselves without any formatting.

Example APA Abstract Page

Download this example as a PDF

Further Information

• APA 7th Edition Abstract and Keywords Guide
• Example APA Abstract
• How to Write a Good Abstract for a Scientific Paper or Conference Presentation
• How to Write a Lab Report
• Writing an APA paper

How long should an APA abstract be?

An APA abstract should typically be between 150 to 250 words long. However, the exact length may vary depending on specific publication or assignment guidelines. It is crucial that it succinctly summarizes the essential elements of the work, including purpose, methods, findings, and conclusions.

Where does the abstract go in an APA paper?

In an APA formatted paper, the abstract is placed on its own page, directly after the title page and before the main body of the paper. It’s typically the second page of the document. It starts with the word “Abstract” (centered and not in bold) at the top of the page, followed by the text of the abstract itself.

What are the 4 C’s of abstract writing?

The 4 C’s of abstract writing are an approach to help you create a well-structured and informative abstract. They are:

Conciseness: An abstract should briefly summarize the key points of your study. Stick to the word limit (typically between 150-250 words for an APA abstract) and avoid unnecessary details.

Clarity: Your abstract should be easy to understand. Avoid jargon and complex sentences. Clearly explain the purpose, methods, results, and conclusions of your study.

Completeness: Even though it’s brief, the abstract should provide a complete overview of your study, including the purpose, methods, key findings, and your interpretation of the results.

Cohesion: The abstract should flow logically from one point to the next, maintaining a coherent narrative about your study. It’s not just a list of disjointed elements; it’s a brief story of your research from start to finish.

What is the abstract of a psychology paper?

An abstract in a psychology paper serves as a snapshot of the paper, allowing readers to quickly understand the purpose, methodology, results, and implications of the research without reading the entire paper. It is generally between 150-250 words long.

Related Articles

Student Resources

How To Cite A YouTube Video In APA Style – With Examples

APA References Page Formatting and Example

APA Title Page (Cover Page) Format, Example, & Templates

How do I Cite a Source with Multiple Authors in APA Style?

How to Write a Psychology Essay

Lab Report Format: Step-by-Step Guide & Examples

• Departments and Units
• Majors and Minors
• LSA Course Guide
• LSA Gateway

Search: {{$root.lsaSearchQuery.q}}, Page {{$root.page}}

• Accessibility
• Undergraduates
• Instructors
• Alums & Friends

• ★ Writing Support
• Minor in Writing
• First-Year Writing Requirement
• Transfer Students
• Writing Guides
• Peer Writing Consultant Program
• Upper-Level Writing Requirement
• Writing Prizes
• International Students
• ★ The Writing Workshop
• Dissertation ECoach
• Fellows Seminar
• Dissertation Writing Groups
• Rackham / Sweetland Workshops
• Dissertation Writing Institute
• Guides to Teaching Writing
• Teaching Support and Services
• Support for FYWR Courses
• Support for ULWR Courses
• Writing Prize Nominating
• Alums Gallery
• Commencement
• Giving Opportunities
• What Exactly is an Abstract?
• How Do I Make Sure I Understand an Assignment?
• How Do I Decide What I Should Argue?
• How Can I Create Stronger Analysis?
• How Do I Effectively Integrate Textual Evidence?
• How Do I Write a Great Title?
• How Do I Present Findings From My Experiment in a Report?
• What is a Run-on Sentence & How Do I Fix It?
• How Do I Check the Structure of My Argument?
• How Do I Write an Intro, Conclusion, & Body Paragraph?
• How Do I Incorporate Quotes?
• How Can I Create a More Successful Powerpoint?
• How Can I Create a Strong Thesis?
• How Can I Write More Descriptively?
• How Do I Incorporate a Counterargument?
• How Do I Check My Citations?

See the bottom of the main Writing Guides page for licensing information.

What Exactly is an Abstract, and How Do I Write One?

An abstract is a short summary of your completed research. It is intended to describe your work without going into great detail. Abstracts should be self-contained and concise, explaining your work as briefly and clearly as possible. Different disciplines call for slightly different approaches to abstracts, as will be illustrated by the examples below, so it would be wise to study some abstracts from your own field before you begin to write one.

General Considerations

Probably the most important function of an abstract is to help a reader decide if he or she is interested in reading your entire publication. For instance, imagine that you’re an undergraduate student sitting in the library late on a Friday night. You’re tired, bored, and sick of looking up articles about the history of celery. The last thing you want to do is reading an entire article only to discover it contributes nothing to your argument. A good abstract can solve this problem by indicating to the reader if the work is likely to be meaningful to his or her particular research project. Additionally, abstracts are used to help libraries catalogue publications based on the keywords that appear in them.

An effective abstract will contain several key features:

• Motivation/problem statement: Why is your research/argument important? What practical, scientific, theoretical or artistic gap is your project filling?
• Methods/procedure/approach: What did you actually do to get your results? (e.g. analyzed 3 novels, completed a series of 5 oil paintings, interviewed 17 students)
• Results/findings/product: As a result of completing the above procedure, what did you learn/invent/create?
• Conclusion/implications: What are the larger implications of your findings, especially for the problem/gap identified previously? Why is this research valuable?

In Practice

Let’s take a look at some sample abstracts, and see where these components show up. To give you an idea of how the author meets these “requirements” of abstract writing, the various features have been color-coded to correspond with the numbers listed above. The general format of an abstract is largely predictable, with some discipline-based differences. One type of abstract not discussed here is the “Descriptive Abstract,” which only summarizes and explains existing research, rather than informing the reader of a new perspective. As you can imagine, such an abstract would omit certain components of our four-colored model.

SAMPLE ABSTRACTS

ABSTRACT #1: History / Social Science

"Their War": The Perspective of the South Vietnamese Military in Their Own Words Author: Julie Pham

Despite the vast research by Americans on the Vietnam War, little is known about the perspective of South Vietnamese military, officially called the Republic of Vietnam Armed Forces (RVNAF). The overall image that emerges from the literature is negative: lazy, corrupt, unpatriotic, apathetic soldiers with poor fighting spirits. This study recovers some of the South Vietnamese military perspective for an American audience through qualititative interviews with 40 RVNAF veterans now living in San José, Sacramento, and Seattle, home to three of the top five largest Vietnamese American communities in the nation. An analysis of these interviews yields the veterans' own explanations that complicate and sometimes even challenge three widely held assumptions about the South Vietnamese military: 1) the RVNAF was rife with corruption at the top ranks, hurting the morale of the lower ranks; 2) racial relations between the South Vietnamese military and the Americans were tense and hostile; and 3) the RVNAF was apathetic in defending South Vietnam from communism. The stories add nuance to our understanding of who the South Vietnamese were in the Vietnam War. This study is part of a growing body of research on non-American perspectives of the war. In using a largely untapped source of Vietnamese history—oral histories with Vietnamese immigrants—this project will contribute to future research on similar topics.

That was a fairly basic abstract that allows us to examine its individual parts more thoroughly.

Motivation/problem statement: The author identifies that previous research has been done about the Vietnam War, but that it has failed to address the specific topic of South Vietnam’s military. This is good because it shows how the author’s research fits into the bigger picture. It isn’t a bad thing to be critical of other research, but be respectful from an academic standpoint (i.e. “Previous researchers are stupid and don’t know what they’re talking about” sounds kind of unprofessional).

Methods/procedure/approach: The author does a good job of explaining how she performed her research, without giving unnecessary detail. Noting that she conducted qualitative interviews with 40 subjects is significant, but she wisely does not explicitly state the kinds of questions asked during the interview, which would be excessive.

Results/findings/product: The results make good use of numbering to clearly indicate what was ascertained from the research—particularly useful, as people often just scan abstracts for the results of an experiment.

Conclusion/implications: Since this paper is historical in nature, its findings may be hard to extrapolate to modern-day phenomena, but the author identifies the importance of her work as part of a growing body of research, which merits further investigation. This strategy functions to encourage future research on the topic.

ABSTRACT #2: Natural Science “A Lysimeter Study of Grass Cover and Water Table Depth Effects on Pesticide Residues in Drainage Water” Authors: A. Liaghat, S.O. Prasher

A study was undertaken to investigate the effect of soil and grass cover, when integrated with water table management (subsurface drainage and controlled drainage), in reducing herbicide residues in agricultural drainage water. Twelve PVC lysimeters, 1 m long and 450 mm diameter, were packed with a sandy soil and used to study the following four treatments: subsurface drainage, controlled drainage, grass (sod) cover, and bare soil. Contaminated water containing atrazine, metolachlor, and metribuzin residues was applied to the lysimeters and samples of drain effluent were collected. Significant reductions in pesticide concentrations were found in all treatments. In the first year, herbicide levels were reduced significantly (1% level), from an average of 250 mg/L to less than 10 mg/L . In the second year, polluted water of 50 mg/L, which is considered more realistic and reasonable in natural drainage waters, was applied to the lysimeters and herbicide residues in the drainage waters were reduced to less than 1 mg/L. The subsurface drainage lysimeters covered with grass proved to be the most effective treatment system.

Motivation/problem statement: Once again, we see that the problem—more like subject of study —is stated first in the abstract. This is normal for abstracts, in that you want to include the most important information first. The results may seem like the most important part of the abstract, but without mentioning the subject, the results won’t make much sense to readers. Notice that the abstract makes no references to other research, which is fine. It is not obligatory to cite other publications in an abstract, and in fact, doing so might distract your reader from YOUR experiment. Either way, it is likely that other sources will surface in your paper’s discussion/conclusion.

Methods/procedure/approach: Notice that the authors include pertinent numbers and figures in describing their methods. An extended description of the methods would probably include a long list of numerical values and conditions for each experimental trial, so it is important to include only the most important values in your abstract—ones that might make your study unique. Additionally, we see that a methodological description appears in two different parts of the abstract. This is fine. It may work better to explain your experiment by more closely connecting each method to its result. One last point: the author doesn’t take time to define—or give any background information about—“atrazine,” “metalachlor,” “lysimeter,” or “metribuzin.” This may be because other ecologists know what these are, but even if that’s not the case, you shouldn’t take time to define terms in your abstract.

Results/findings/product: Similar to the methods component of the abstract, you want to condense your findings to include only the major result of the experiment. Again, this study focused on two major trials, so both trials and both major results are listed. A particularly important word to consider when sharing results in an abstract is “significant.” In statistics, “significant” means roughly that your results were not due to chance. In your paper, your results may be hundreds of words long, and involve dozens of tables and graphs, but ultimately, your reader only wants to know: “What was the main result, and was that result significant?” So, try to answer both these questions in the abstract.

Conclusion/implications: This abstract’s conclusion sounds more like a result: “…lysimeters covered with grass were found to be the most effective treatment system.” This may seem incomplete, since it does not explain how this system could/should/would be applied to other situations, but that’s okay. There is plenty of space for addressing those issues in the body of the paper.

ABSTRACT #3: Philosophy / Literature [Note: Many papers don’t precisely follow the previous format, since they do not involve an experiment and its methods. Nonetheless, they typically rely on a similar structure.]

“Participatory Legitimation: A Reply to Arash Abizadeh” Author: Eric Schmidt, Louisiana State University, 2011

Arash Abizadeh’s argument against unilateral border control relies on his unbounded demos thesis, which is supported negatively by arguing that the ‘bounded demos thesis’ is incoherent. The incoherency arises for two reasons: (1) Democratic principles cannot be brought to bear on matters (border control) logically prior to the constitution of a group, and (2), the civic definition of citizens and non-citizens creates an ‘externality problem’ because the act of definition is an exercise of coercive power over all persons. The bounded demos thesis is rejected because the “will of the people” fails to legitimate democratic political order because there can be no pre-political political will of the people. However, I argue that “the will of the people” can be made manifest under a robust understanding of participatory legitimation, which exists concurrently with the political state, and thus defines both its borders and citizens as bounded , rescuing the bounded demos thesis and compromising the rest of Abizadeh’s article.

This paper may not make any sense to someone not studying philosophy, or not having read the text being critiqued. However, we can still see where the author separates the different components of the abstract, even if we don’t understand the terminology used.

Motivation/problem statement: The problem is not really a problem, but rather another person’s belief on a subject matter. For that reason, the author takes time to carefully explain the exact theory that he will be arguing against.

Methods/procedure/approach: [Note that there is no traditional “Methods” component of this abstract.] Reviews like this are purely critical and don’t necessarily involve performing experiments as in the other abstracts we have seen. Still, a paper like this may incorporate ideas from other sources, much like our traditional definition of experimental research.

Results/findings/product: In a paper like this, the “findings” tend to resemble what you have concluded about something, which will largely be based on your own opinion, supported by various examples. For that reason, the finding of this paper is: “The ‘will of the people,’ actually corresponds to a ‘bounded demos thesis.’” Even though we aren’t sure what the terms mean, we can plainly see that the finding (argument) is in support of “bounded,” rather than “unbounded.”

Conclusion/implications: If our finding is that “bounded” is correct, then what should we conclude? [In this case, the conclusion is simply that the initial author, A.A., is wrong.] Some critical papers attempt to broaden the conclusion to show something outside the scope of the paper. For example, if A.A. believes his “unbounded demos thesis” to be correct (when he is actually mistaken), what does this say about him? About his philosophy? About society as a whole? Maybe people who agree with him are more likely to vote Democrat, more likely to approve of certain immigration policies, more likely to own Labrador retrievers as pets, etc.

Applying These Skills

Now that you know the general layout of an abstract, here are some tips to keep in mind as you write your own:

1. The abstract stands alone

• An abstract shouldn’t be considered “part” of a paper—it should be able to stand independently and still tell the reader something significant.

2. Keep it short

• A general rule of abstract length is 200-300 words, or about 1/10th of the entire paper.

3. Don’t add new information

• If something doesn’t appear in your actual paper, then don’t put it in the abstract.

4. Be consistent with voice, tone, and style

• Try to write the abstract in the same style as your paper (i.e. If you’re not using contractions in your paper, the do not use them in your abstract).

5. Be concise

• Try to shorten your sentences as often as possible. If you can say something clearly in five words rather than ten, then do it.

6. Break up its components

• If allowed, subdivide the components of your abstract with bolded headings for “Background,” “Methods,” etc.

7. The abstract should be part of your writing process

• Consider writing your abstract after you finish your entire paper.
• There’s nothing wrong with copying and pasting important sentences and phrases from your paper … provided that they’re your own words.
• Write multiple drafts, and keep revising. An abstract is very important to your publication (or assignment) and should be treated as such.

"Abstracts." The Writing Center. The University of North Carolina, n.d. Web. 1 Jun 2011. http://www.unc.edu/depts/wcweb/handouts/abstracts.html "Abstracts." The Writing Center. Rensselaer Polytechnic Institute, n.d. Web. 1 Jun 2011. http://www.rpi.edu/web/writingcenter/abstracts.html

Last updated August 2013

• Information For
• Prospective Students
• Current Students
• Faculty and Staff
• Alumni and Friends
• More about LSA
• How Do I Apply?
• LSA Magazine
• Student Resources
• Academic Advising
• Global Studies
• LSA Opportunity Hub
• Social Media
• Update Contact Info
• Privacy Statement
• Report Feedback

School of Criminology

Congratulations to Korrie Grant on successfully defending her MA thesis

• Administration and Staff
• Criminology Faculty
• Applied Legal Studies Faculty
• Adjunct Professors & Associate members
• Emeritus & retired faculty
• In Memoriam
• Visiting Faculty & Term Lecturers
• Director's Welcome
• Why study criminology
• Honours Program
• Post Baccalaureate Diploma Programs
• Second Degree Option
• Directed Readings and Directed Studies
• Application Process
• Placement Opportunities
• Guidelines for Field Placement Descriptions
• Responsibility of the Agency Field Supervisor
• Advising FAQ
• Contact an Advisor
• Sample Course Plan A (3 Term)
• Sample Course Plan B (2 Term)
• Sample Course Plan C (Lighter Option)
• Program Completion Check Sheets
• Alumni Testimonials
• Graduate Director's Welcome
• Faculty & Administration
• Program Overview
• BC Notaries Public
• Research group
• Alumni Profiles
• Graduate Students' Association
• MA Students
• PHD Students
• Upcoming Thesis Defence
• Research Clusters
• Institute & Centres
• Research Connections
• Presentations & Videos
• Student Association (CSA)
• Publications
• The Founding Family
• Annual Forum
• Annual Lecture and Dialogue Series
• The Ting Ocassional Forums

Congratulations to Korrie Grant for successfully defending her MA thesis titled “Learning to Walk in a Good Way: A White Occupier’s Path to Decolonizing Criminology”.

The TRC (2015) and National Inquiry (2019) call on settler-Canadian educators, researchers, students, and criminal justice system members to address the genocides against Indigenous peoples. This thesis explores how criminology can work with and for Indigenous peoples in research, what a decolonizing lens in criminology might look like, and how the discipline can walk in the good way in addressing the MMIWG. Between 2018-2024, I participated in 20 workshops, conferences and lectures and 14 conversational dialogues to explore these subjects. I then employed Absolon’s Flower Petal Framework to frame what I learned. This experience showed me settlers need to: learn where we have come from to embrace the teachings to walk in the good way; understand where we are to see the siloed stories and experience transformative learning for reconciliation (TL4R); and act in alignment with Indigenous resurgence to work on the ‘next now’ for the next seven generations.

• Criminology  graduate programs

Get involved

• Sign up  for our monthly newsletter 

• Search Menu
• Sign in through your institution
• Advance Articles
• Editor's Choice
• Braunwald's Corner
• ESC Guidelines
• EHJ Dialogues
• Issue @ a Glance Podcasts
• CardioPulse
• Weekly Journal Scan
• European Heart Journal Supplements
• Year in Cardiovascular Medicine
• Asia in EHJ
• Most Cited Articles
• ESC Content Collections
• Author Guidelines
• Submission Site
• Why publish with EHJ?
• Open Access Options
• Submit from medRxiv or bioRxiv
• Author Resources
• Self-Archiving Policy
• Read & Publish
• Advertising and Corporate Services
• Advertising
• Reprints and ePrints
• Sponsored Supplements
• Journals Career Network
• About European Heart Journal
• Editorial Board
• About the European Society of Cardiology
• ESC Publications
• War in Ukraine
• ESC Membership
• ESC Journals App
• Developing Countries Initiative
• Dispatch Dates
• Terms and Conditions
• Journals on Oxford Academic
• Books on Oxford Academic

Article Contents

Risk of heart failure in inflammatory bowel disease: a swedish population-based study.

• Article contents
• Figures & tables
• Supplementary Data

Jiangwei Sun, Jialu Yao, Ola Olén, Jonas Halfvarson, David Bergman, Fahim Ebrahimi, Annika Rosengren, Johan Sundström, Jonas F Ludvigsson, Risk of heart failure in inflammatory bowel disease: a Swedish population-based study, European Heart Journal , 2024;, ehae338, https://doi.org/10.1093/eurheartj/ehae338

• Permissions Icon Permissions

Dysregulation of inflammatory and immune responses has been implicated in the pathogenesis of heart failure (HF). But even if inflammation is a prerequisite for inflammatory bowel disease (IBD), little is known about HF risk in IBD.

In this Swedish nationwide cohort, patients with biopsy-confirmed IBD were identified between 1969 and 2017 [n = 81,749, Crohn’s disease (CD, n = 24,303), ulcerative colitis (UC, n = 45,709), and IBD-unclassified (IBD-U, n = 11,737)]. Each patient was matched with up to five general population reference individuals (n = 382,190) and IBD-free full siblings (n = 95,239) and followed until 31 December 2019. Flexible parametric survival models estimated the adjusted hazard ratio (aHR) and standardized cumulative incidence for HF, with 95% confidence intervals (CI).

There were 5,582 incident HF identified in IBD patients (incidence rate [IR]: 50.3/10,000 person-years) and 20,343 in reference individuals (IR: 37.9) during a median follow-up of 12.4 years. IBD patients had a higher risk of HF than reference individuals (aHR 1.19, 95% CI 1.15 to 1.23). This increased risk remained significant ≥20 years after IBD diagnosis, leading to one extra HF case per 130 IBD patients until then. The increased risk was also observed across IBD subtypes: CD (IR: 46.9 vs. 34.4; aHR 1.28 [1.20 to 1.36]), UC (IR: 50.1 vs. 39.7; aHR 1.14 [1.09 to 1.19]), and IBD-U (IR: 60.9 vs. 39.0; aHR 1.28 [1.16 to 1.42]). Sibling-controlled analyses showed slightly attenuated association (IBD: aHR 1.10 [1.03 to 1.19]).

Patients with IBD had a moderately higher risk of developing HF for ≥20 years after IBD diagnosis than the general population.

• heart failure
• inflammatory bowel disease

Supplementary data

Email alerts, companion article.

• Human Immunology of Heart Failure: Deconstructing Inflammatory Risk

Related articles in PubMed

Citing articles via, looking for your next opportunity, affiliations.

• Online ISSN 1522-9645
• Print ISSN 0195-668X
• Copyright © 2024 European Society of Cardiology
• About Oxford Academic
• Publish journals with us
• University press partners
• What we publish
• New features  
• Open access
• Institutional account management
• Rights and permissions
• Get help with access
• Accessibility
• Media enquiries
• Oxford University Press
• Oxford Languages
• University of Oxford

Oxford University Press is a department of the University of Oxford. It furthers the University's objective of excellence in research, scholarship, and education by publishing worldwide

• Copyright © 2024 Oxford University Press
• Cookie settings
• Cookie policy
• Privacy policy
• Legal notice

This Feature Is Available To Subscribers Only

Sign In or Create an Account

This PDF is available to Subscribers Only

For full access to this pdf, sign in to an existing account, or purchase an annual subscription.

ADVANCES IN IMAGE-BASED DATA HIDING, FEATURE DETECTION, GRID ALIGNMENT, AND DOCUMENT CLASSIFICATION

Data embedding tools such as barcodes are very popular nowadays but not aesthetically pleasing. In this research, we propose a watermarking scheme and an image-based surface coding scheme using the grid points as fiducial markers and the shifted points as data-bearing features. Detecting and aligning point grids play a fundamental role in these applications. Joint determination of non-grid points and estimation of non-linear spatial distortions applied to the grid is a key challenge for grid alignment. We modify a SIFT-based surface feature detection method to eliminate as many spurious feature points as possible and propose a grid alignment algorithm that starts from a small nearly regular region found in the point set and then expands the list of candidate points included in the grid. Our method is tested on both synthetically generated and real samples. Furthermore, we extend some applications of the surface coding scheme to 3D space, including hyper-conformal mapping of the grid pattern onto the 3D models, 3D surface feature detection, and 3D grid points alignment. 

A document routing system is crucial to the concept of the smart office. We abstract it as an online class-incremental image classification problem. There are two kinds of classifiers to solve this problem: exemplar, and parametric classifiers. The architecture of exemplar-based classification is summarized here. We propose a one-versus-rest parametric classifier and four different updating algorithms based on the passive-aggressiveness algorithm. An adaptive thresholding method is also proposed to indicate the low-confidence prediction. We test our methods on 547 real document images that we collected and labeled and high cumulative accuracy is reported. 

Degree Type

• Doctor of Philosophy
• Electrical and Computer Engineering

Campus location

• West Lafayette

Advisor/Supervisor/Committee Chair

Additional committee member 2, additional committee member 3, additional committee member 4, additional committee member 5, usage metrics.

• Signal processing