dissertation methods chapter

• Privacy Policy

Home » Dissertation Methodology – Structure, Example and Writing Guide

Dissertation Methodology – Structure, Example and Writing Guide

• Table of Contents

Dissertation Methodology

In any research, the methodology chapter is one of the key components of your dissertation. It provides a detailed description of the methods you used to conduct your research and helps readers understand how you obtained your data and how you plan to analyze it. This section is crucial for replicating the study and validating its results.

Here are the basic elements that are typically included in a dissertation methodology:

• Introduction : This section should explain the importance and goals of your research .
• Research Design : Outline your research approach and why it’s appropriate for your study. You might be conducting an experimental research, a qualitative research, a quantitative research, or a mixed-methods research.
• Data Collection : This section should detail the methods you used to collect your data. Did you use surveys, interviews, observations, etc.? Why did you choose these methods? You should also include who your participants were, how you recruited them, and any ethical considerations.
• Data Analysis : Explain how you intend to analyze the data you collected. This could include statistical analysis, thematic analysis, content analysis, etc., depending on the nature of your study.
• Reliability and Validity : Discuss how you’ve ensured the reliability and validity of your study. For instance, you could discuss measures taken to reduce bias, how you ensured that your measures accurately capture what they were intended to, or how you will handle any limitations in your study.
• Ethical Considerations : This is where you state how you have considered ethical issues related to your research, how you have protected the participants’ rights, and how you have complied with the relevant ethical guidelines.
• Limitations : Acknowledge any limitations of your methodology, including any biases and constraints that might have affected your study.
• Summary : Recap the key points of your methodology chapter, highlighting the overall approach and rationalization of your research.

Types of Dissertation Methodology

The type of methodology you choose for your dissertation will depend on the nature of your research question and the field you’re working in. Here are some of the most common types of methodologies used in dissertations:

Experimental Research

This involves creating an experiment that will test your hypothesis. You’ll need to design an experiment, manipulate variables, collect data, and analyze that data to draw conclusions. This is commonly used in fields like psychology, biology, and physics.

Survey Research

This type of research involves gathering data from a large number of participants using tools like questionnaires or surveys. It can be used to collect a large amount of data and is often used in fields like sociology, marketing, and public health.

Qualitative Research

This type of research is used to explore complex phenomena that can’t be easily quantified. Methods include interviews, focus groups, and observations. This methodology is common in fields like anthropology, sociology, and education.

Quantitative Research

Quantitative research uses numerical data to answer research questions. This can include statistical, mathematical, or computational techniques. It’s common in fields like economics, psychology, and health sciences.

Case Study Research

This type of research involves in-depth investigation of a particular case, such as an individual, group, or event. This methodology is often used in psychology, social sciences, and business.

Mixed Methods Research

This combines qualitative and quantitative research methods in a single study. It’s used to answer more complex research questions and is becoming more popular in fields like social sciences, health sciences, and education.

Action Research

This type of research involves taking action and then reflecting upon the results. This cycle of action-reflection-action continues throughout the study. It’s often used in fields like education and organizational development.

Longitudinal Research

This type of research involves studying the same group of individuals over an extended period of time. This could involve surveys, observations, or experiments. It’s common in fields like psychology, sociology, and medicine.

Ethnographic Research

This type of research involves the in-depth study of people and cultures. Researchers immerse themselves in the culture they’re studying to collect data. This is often used in fields like anthropology and social sciences.

Structure of Dissertation Methodology

The structure of a dissertation methodology can vary depending on your field of study, the nature of your research, and the guidelines of your institution. However, a standard structure typically includes the following elements:

• Introduction : Briefly introduce your overall approach to the research. Explain what you plan to explore and why it’s important.
• Research Design/Approach : Describe your overall research design. This can be qualitative, quantitative, or mixed methods. Explain the rationale behind your chosen design and why it is suitable for your research questions or hypotheses.
• Data Collection Methods : Detail the methods you used to collect your data. You should include what type of data you collected, how you collected it, and why you chose this method. If relevant, you can also include information about your sample population, such as how many people participated, how they were chosen, and any relevant demographic information.
• Data Analysis Methods : Explain how you plan to analyze your collected data. This will depend on the nature of your data. For example, if you collected quantitative data, you might discuss statistical analysis techniques. If you collected qualitative data, you might discuss coding strategies, thematic analysis, or narrative analysis.
• Reliability and Validity : Discuss how you’ve ensured the reliability and validity of your research. This might include steps you took to reduce bias or increase the accuracy of your measurements.
• Ethical Considerations : If relevant, discuss any ethical issues associated with your research. This might include how you obtained informed consent from participants, how you ensured participants’ privacy and confidentiality, or any potential conflicts of interest.
• Limitations : Acknowledge any limitations in your research methodology. This could include potential sources of bias, difficulties with data collection, or limitations in your analysis methods.
• Summary/Conclusion : Briefly summarize the key points of your methodology, emphasizing how it helps answer your research questions or hypotheses.

How to Write Dissertation Methodology

Writing a dissertation methodology requires you to be clear and precise about the way you’ve carried out your research. It’s an opportunity to convince your readers of the appropriateness and reliability of your approach to your research question. Here is a basic guideline on how to write your methodology section:

1. Introduction

Start your methodology section by restating your research question(s) or objective(s). This ensures your methodology directly ties into the aim of your research.

2. Approach

Identify your overall approach: qualitative, quantitative, or mixed methods. Explain why you have chosen this approach.

• Qualitative methods are typically used for exploratory research and involve collecting non-numerical data. This might involve interviews, observations, or analysis of texts.
• Quantitative methods are used for research that relies on numerical data. This might involve surveys, experiments, or statistical analysis.
• Mixed methods use a combination of both qualitative and quantitative research methods.

3. Research Design

Describe the overall design of your research. This could involve explaining the type of study (e.g., case study, ethnography, experimental research, etc.), how you’ve defined and measured your variables, and any control measures you’ve implemented.

4. Data Collection

Explain in detail how you collected your data.

• If you’ve used qualitative methods, you might detail how you selected participants for interviews or focus groups, how you conducted observations, or how you analyzed existing texts.
• If you’ve used quantitative methods, you might detail how you designed your survey or experiment, how you collected responses, and how you ensured your data is reliable and valid.

5. Data Analysis

Describe how you analyzed your data.

• If you’re doing qualitative research, this might involve thematic analysis, discourse analysis, or grounded theory.
• If you’re doing quantitative research, you might be conducting statistical tests, regression analysis, or factor analysis.

Discuss any ethical issues related to your research. This might involve explaining how you obtained informed consent, how you’re protecting participants’ privacy, or how you’re managing any potential harms to participants.

7. Reliability and Validity

Discuss the steps you’ve taken to ensure the reliability and validity of your data.

• Reliability refers to the consistency of your measurements, and you might discuss how you’ve piloted your instruments or used standardized measures.
• Validity refers to the accuracy of your measurements, and you might discuss how you’ve ensured your measures reflect the concepts they’re supposed to measure.

8. Limitations

Every study has its limitations. Discuss the potential weaknesses of your chosen methods and explain any obstacles you faced in your research.

9. Conclusion

Summarize the key points of your methodology, emphasizing how it helps to address your research question or objective.

Example of Dissertation Methodology

An Example of Dissertation Methodology is as follows:

Chapter 3: Methodology

• Introduction

This chapter details the methodology adopted in this research. The study aimed to explore the relationship between stress and productivity in the workplace. A mixed-methods research design was used to collect and analyze data.

Research Design

This study adopted a mixed-methods approach, combining quantitative surveys with qualitative interviews to provide a comprehensive understanding of the research problem. The rationale for this approach is that while quantitative data can provide a broad overview of the relationships between variables, qualitative data can provide deeper insights into the nuances of these relationships.

Data Collection Methods

Quantitative Data Collection : An online self-report questionnaire was used to collect data from participants. The questionnaire consisted of two standardized scales: the Perceived Stress Scale (PSS) to measure stress levels and the Individual Work Productivity Questionnaire (IWPQ) to measure productivity. The sample consisted of 200 office workers randomly selected from various companies in the city.

Qualitative Data Collection : Semi-structured interviews were conducted with 20 participants chosen from the initial sample. The interview guide included questions about participants’ experiences with stress and how they perceived its impact on their productivity.

Data Analysis Methods

Quantitative Data Analysis : Descriptive and inferential statistics were used to analyze the survey data. Pearson’s correlation was used to examine the relationship between stress and productivity.

Qualitative Data Analysis : Interviews were transcribed and subjected to thematic analysis using NVivo software. This process allowed for identifying and analyzing patterns and themes regarding the impact of stress on productivity.

Reliability and Validity

To ensure reliability and validity, standardized measures with good psychometric properties were used. In qualitative data analysis, triangulation was employed by having two researchers independently analyze the data and then compare findings.

Ethical Considerations

All participants provided informed consent prior to their involvement in the study. They were informed about the purpose of the study, their rights as participants, and the confidentiality of their responses.

Limitations

The main limitation of this study is its reliance on self-report measures, which can be subject to biases such as social desirability bias. Moreover, the sample was drawn from a single city, which may limit the generalizability of the findings.

Where to Write Dissertation Methodology

In a dissertation or thesis, the Methodology section usually follows the Literature Review. This placement allows the Methodology to build upon the theoretical framework and existing research outlined in the Literature Review, and precedes the Results or Findings section. Here’s a basic outline of how most dissertations are structured:

• Acknowledgements
• Literature Review (or it may be interspersed throughout the dissertation)
• Methodology
• Results/Findings
• References/Bibliography

In the Methodology chapter, you will discuss the research design, data collection methods, data analysis methods, and any ethical considerations pertaining to your study. This allows your readers to understand how your research was conducted and how you arrived at your results.

Advantages of Dissertation Methodology

The dissertation methodology section plays an important role in a dissertation for several reasons. Here are some of the advantages of having a well-crafted methodology section in your dissertation:

• Clarifies Your Research Approach : The methodology section explains how you plan to tackle your research question, providing a clear plan for data collection and analysis.
• Enables Replication : A detailed methodology allows other researchers to replicate your study. Replication is an important aspect of scientific research because it provides validation of the study’s results.
• Demonstrates Rigor : A well-written methodology shows that you’ve thought critically about your research methods and have chosen the most appropriate ones for your research question. This adds credibility to your study.
• Enhances Transparency : Detailing your methods allows readers to understand the steps you took in your research. This increases the transparency of your study and allows readers to evaluate potential biases or limitations.
• Helps in Addressing Research Limitations : In your methodology section, you can acknowledge and explain the limitations of your research. This is important as it shows you understand that no research method is perfect and there are always potential weaknesses.
• Facilitates Peer Review : A detailed methodology helps peer reviewers assess the soundness of your research design. This is an important part of the publication process if you aim to publish your dissertation in a peer-reviewed journal.
• Establishes the Validity and Reliability : Your methodology section should also include a discussion of the steps you took to ensure the validity and reliability of your measurements, which is crucial for establishing the overall quality of your research.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Delimitations in Research – Types, Examples and...

Research Design – Types, Methods and Examples

What is a Hypothesis – Types, Examples and...

Dissertation – Format, Example and Template

Dissertation vs Thesis – Key Differences

Ethical Considerations – Types, Examples and...

Writing the Dissertation - Guides for Success: The Methodology

• Writing the Dissertation Homepage
• Overview and Planning
• The Literature Review
• The Methodology
• The Results and Discussion
• The Conclusion
• The Abstract
• Getting Started
• What to Avoid

Overview of writing the methodology

The methodology chapter precisely outlines the research method(s) employed in your dissertation and considers any relevant decisions you made, and challenges faced, when conducting your research. Getting this right is crucial because it lays the foundation for what’s to come: your results and discussion.

Disciplinary differences

Please note: this guide is not specific to any one discipline. The methodology can vary depending on the nature of the research and the expectations of the school or department. Please adapt the following advice to meet the demands of your dissertation and the expectations of your school or department. Consult your supervisor for further guidance; you can also check out our  Writing Across Subjects guide .

Guide contents

As part of the Writing the Dissertation series, this guide covers the most common conventions found in a methodology chapter, giving you the necessary knowledge, tips and guidance needed to impress your markers!  The sections are organised as follows:

• Getting Started  - Defines the methodology and its core characteristics.
• Structure  - Provides a detailed walk-through of common subsections or components of the methodology.
• What to Avoid  - Covers a few frequent mistakes you'll want to...avoid!
• FAQs  - Guidance on first- vs. third-person, secondary literature and more.
• Checklist  - Includes a summary of key points and a self-evaluation checklist.

Training and tools

• The Academic Skills team has recorded a Writing the Dissertation workshop series to help you with each section of a standard dissertation, including a video on writing the method/methodology .
• For more on methods and methodologies, you can check out USC's methodology research guide  and Huddersfield's guide to writing the methodology of an undergraduate dissertation .
• The dissertation planner tool can help you think through the timeline for planning, research, drafting and editing.
• iSolutions offers training and a Word template to help you digitally format and structure your dissertation.

What is the methodology?

The methodology of a dissertation is like constructing a house of cards. Having strong and stable foundations for your research relies on your ability to make informed and rational choices about the design of your study. Everything from this point on – your results and discussion –  rests on these decisions, like the bottom layer of a house of cards.

The methodology is where you explicitly state, in relevant detail, how you conduced your study in direct response to your research question(s) and/or hypotheses. You should work through the linear process of devising your study to implementing it, covering the important choices you made and any potential obstacles you faced along the way.

Methods or methodology?

Some disciplines refer to this chapter as the research methods , whilst others call it the methodology . The two are often used interchangeably, but they are slightly different. The methods chapter outlines the techniques used to conduct the research and the specific steps taken throughout the research process. The methodology also outlines how the research was conducted, but is particularly interested in the philosophical underpinning that shapes the research process. As indicated by the suffix, -ology , meaning the study of something, the methodology is like the study of research, as opposed to simply stating how the research was conducted.

This guide focuses on the methodology, as opposed to the methods, although the content and guidance can be tailored to a methods chapter. Every dissertation is different and every methodology has its own nuances, so ensure you adapt the content here to your research and always consult your supervisor for more detailed guidance.

What are my markers looking for?

Your markers are looking   for your understanding of the complex process behind original (see definition) research. They are assessing your ability to...

• Demonstrate   an understanding of the impact that methodological choices can have on the reliability and validity of your findings, meaning you should engage with ‘why’ you did that, as opposed to simply ‘what’ you did.
• Make   informed methodological choices that clearly relate to your research question(s).

But what does it mean to engage in 'original' research? Originality doesn’t strictly mean you should be inventing something entirely new. Originality comes in many forms, from updating the application of a theory, to adapting a previous experiment for new purposes – it’s about making a worthwhile contribution.

Structuring your methodology

The methodology chapter should outline the research process undertaken, from selecting the method to articulating the tool or approach adopted to analyse your results. Because you are outlining this process, it's important that you structure your methodology in a linear way, showing how certain decisions have impacted on subsequent choices.

Scroll to continue reading, or click a link below to jump immediately to that section:

The 'research onion'

To ensure you write your methodology in a linear way, it can be useful to think of the methodology in terms of layers, as shown in the figure below.

Figure: 'Research onion' from Saunders et al. (2007).

You don't need to precisely follow these exact layers as some won't be relevant to your research. However, the layered 'out to in' structure developed by Saunders et al. (2007) is appropriate for any methodology chapter because it guides your reader through the process in a linear fashion, demonstrating how certain decisions impacted on others. For example, you need to state whether your research is qualitative, quantitative or mixed before articulating your precise research method. Likewise, you need to explain how you collected your data before you inform the reader of how you subsequently analysed that data.

Using this linear approach from 'outer' layer to 'inner' layer, the next sections will take you through the most common layers used to structure a methodology chapter.

Introduction and research outline

Like any chapter, you should open your methodology with an introduction. It's good to start by briefly restating the research problem, or gap, that you're addressing, along with your research question(s) and/or hypotheses. Following this, it's common to provide a very condensed statement that outlines the most important elements of your research design. Here's a short example:

This study adopted qualitative research through a series of semi-structured interviews with seven experienced industry professionals.

Like any other introduction, you can then provide a brief statement outlining what the chapter is about and how it's structured (e.g., an essay map ).

Restating the research problem (or gap) and your research question(s) and/or hypotheses creates a natural transition from your previous review of the literature - which helped you to identify the gap or problem - to how you are now going to address such a problem. Your markers are also going to assess the relevance and suitability of your method and methodological choices against your research question(s), so it's good to 'frame' the entire chapter around the research question(s) by bringing them to the fore.

Research philosophy

A research philosophy is an underlying belief that shapes the way research is conducted. For this reason, as featured in the 'research onion' above, the philosophy should be the outermost layer - the first methodological issue you deal with following the introduction and research outline - because every subsequent choice, from the method employed to the way you analyse data, is directly influenced by your philosophical stance.

You can say something about other philosophies, but it's best to directly relate this to your research and the philosophy you have selected - why the other philosophy isn't appropriate for you to adopt, for instance. Otherwise, explain to your reader the philosophy you have selected (using secondary literature), its underlying principles, and why this philosophy, therefore, is particularly relevant to your research.

The research philosophy is sometimes featured in a methodology chapter, but not always. It depends on the conventions within your school or discipline , so only include this if it's expected.

The reason for outlining the research philosophy is to show your understanding of the role that your chosen philosophy plays in shaping the design and approach of your research study. The philosophy you adopt also indicates your worldview (in the context of this research), which is an important way of highlighting the role you, the researcher, play in shaping new knowledge.

Research method

This is where you state whether you're doing qualitative, quantitative or mixed-methods research before outlining the exact instrument or strategy (see definition) adopted for research (interviews, case study, etc.). It's also important that you explain why you have chosen that particular method and strategy. You can also explain why you're not adopting an alternate form of research, or why you haven't used a particular instrument, but keep this brief and use it to reinforce why you have chosen your method and strategy.

Your research method, more than anything else, is going to directly influence how effectively you answer your research question(s). For that reason, it's crucial that you emphasise the suitability of your chosen method and instrument for the purposes of your research.                       

Data collection

The data collection part of your methodology explain the process of how you accessed and collected your data. Using an interview as a qualitative example, this might include the criteria for selecting participants, how you recruited the participants and how and where you conducted the interviews. There is often some overlap with data collection and research method, so don't worry about this. Just make sure you get the essential information across to your reader.

The details of how you accessed and collected your data are important for replicability purposes - the ability for someone to adopt the same approach and repeat the study. It's also important to include this information for reliability and consistency purposes (see  validity and reliability  on the next tab of this guide for more).

Data analysis

After describing how you collected the data, you need to identify your chosen method of data analysis. Inevitably, this will vary depending on whether your research is qualitative or quantitative (see note below).

Qualitative research tends to be narrative-based where forms of ‘coding’ are employed to categorise and group the data into meaningful themes and patterns (Bui, 2014). Quantitative deals with numerical data meaning some form of statistical approach is taken to measure the results against the research question(s).

Tell your reader which data analysis software (such as SPSS or Atlast.ti) or method you’ve used and why, using relevant literature. Again, you can mention other data analysis tools that you haven’t used, but keep this brief and relate it to your discussion of your chosen approach. This isn’t to be confused with the results and discussion chapters where you actually state and then analyse your results. This is simply a discussion of the approach taken, how you applied this approach to your data and why you opted for this method of data analysis.

Detail of how you analysed your data helps to contextualise your results and discussion chapters. This is also a validity issue (see next tab of guide), as you need to ensure that your chosen method for data analysis helps you to answer your research question(s) and/or respond to your hypotheses. To use an example from Bui (2014: 155), 'if one of the research questions asks whether the participants changed their behaviour before and after the study, then one of the procedures for data analysis needs to be a comparison of the pre- and postdata'.

Validity and reliability

Validity simply refers to whether the research method(s) and instrument(s) applied are directly suited to meet the purposes of your research – whether they help you to answer your research question(s), or allow you to formulate a response to your hypotheses.

Validity can be separated into two forms: internal and external. The difference between the two is defined by what exists inside the study (internal) and what exists outside the study (external).

• Internal validity is the extent to which ‘the results obtained can be attributed to the manipulation of the independent variable' (Salkind, 2011: 147).
• External validity refers to the application of your study’s findings outside the setting of your study. This is known as generalisability , meaning to what extent are the results applicable to a wider context or population.

Reliability

Reliability refers to the consistency with which you designed and implemented your research instrument(s). The idea behind this is to ensure that someone else could replicate your study and, by applying the instrument in the exact same way, would achieve the same results. This is crucial to quantitative and scientific based research, but isn’t strictly the case with qualitative research given the subjective nature of the data.

With qualitative data, it’s important to emphasise that data was collected in a consistent way to avoid any distortions. For example, let’s say you’ve circulated a questionnaire to participants. You would want to ensure that every participant receives the exact same questionnaire with precisely the same questions and wording, unless different questionnaires are required for different members of the sample for the purposes of the research.

Ethical considerations

Any research involving human participants needs to consider ethical factors. In response, you need to show your markers that you have implemented the necessary measures to cover the relevant ethical issues. These are some of the factors that are typically included:

• How did you gain the consent of participants, and how did you formally record this consent?
• What measures did you take to ensure participants had enough understanding of their role to make an informed decision, including the right to withdraw at any stage?
• What measures did you take to maintain the confidentiality of participants during the research and, potentially, for the write-up?
• What measures did you take to store the raw data and protect it from external access and use prior to the write-up?

These are only a few examples of the ethical factors you need to write about in your methodology. Depending on the nature of your research, ethical considerations might form a significant part of your methodology chapter, or may only constitute a few sentences. Either way, it’s imperative that you show your markers that you’ve considered the relevant ethical implications of your research.

Limitations

Don’t make the mistake of ignoring the limitations of your study (see the next tab, 'What to Avoid', for more on this) – it’s a common part of research and should be confronted. Limitations of research can be diverse, but tend to be logistical issues relating to time, scope and access . Whilst accepting that your study has certain limitations, the key is to put a positive spin on it, like the example below:

Despite having a limited sample size compared to other similar studies, the number of participants is enough to provide sufficient data, whilst the in-depth nature of the interviews facilitates detailed responses from participants.

• Bui, Y. N. (2014) How to Write a Master’s Thesis. 2dn Edtn. Thousand Oaks, CA: Sage.
• Guba, E. G. and Lincoln, Y. S. (1994) ‘Competing paradigms in qualitative research’, in Denzin, N. K. and Lincoln, N. S. (eds.) Handbook of Qualitative Research. Thousand Oaks, CA: Sage, pp. 105-117.
• Salkind, N. J. (2011) ‘Internal and external validity’, in Moutinho, L. and Hutchenson, G. D. (eds.) The SAGE Dictionary of Quantitative Management Research . Thousand Oaks, CA: Sage, pp. 147-149.
• Saunders, M., Lewis, P. and Thornhill, A. (2007) Research Methods for Business Students . 4th Edtn. Harlow: Pearson.

What to avoid

This portion of the guide will cover some common missteps you should try to avoid in writing your methodology.

Ignoring limitations

It might seem instinctive to hide any flaws or limitations with your research to protect yourself from criticism. However, you need to highlight any problems you encountered during the research phase, or any limitations with your approach. Your markers are expecting you to engage with these limitations and highlight the kind of impact they may have had on your research.

Just be careful that you don’t overstress these limitations. Doing so could undermine the reliability and validity of your results, and your credibility as a researcher.

Literature review of methods

Don’t mistake your methodology chapter as a detailed review of methods employed in other studies. This level of detail should, where relevant, be incorporated in the literature review chapter, instead (see our Writing the Literature Review guide ). Any reference to methodological choices made by other researchers should come into your methodology chapter, but only in support of the decisions you made.

Unnecessary detail

It’s important to be thorough in a methodology chapter. However, don’t include unnecessary levels of detail. You should provide enough detail that allows other researchers to replicate or adapt your study, but don’t bore your reader with obvious or extraneous detail.

Any materials or content that you think is worth including, but not essential in the chapter, could be included in an appendix (see definition). These don’t count towards your word count (unless otherwise stated), and they can provide further detail and context for your reader. For instance, it’s quite common to include a copy of a questionnaire in an appendix, or a list of interview questions.

Q: Should the methodology be in the past or present tense?

A: The past tense. The study has already been conducted and the methodological decisions have been implemented, meaning the chapter should be written in the past tense. For example...

Data was collected over the course of four weeks.

I informed participants of their right to withdraw at any time.

The surveys included ten questions about job satisfaction and ten questions about familial life (see Appendix).

Q: Should the methodology include secondary literature?

A: Yes, where relevant. Unlike the literature review, the methodology is driven by what you did rather than what other people have done. However, you should still draw on secondary sources, when necessary, to support your methodological decisions.

Q: Do you still need to write a methodology for secondary research?

A: Yes, although it might not form a chapter, as such. Including some detail on how you approached the research phase is always a crucial part of a dissertation, whether primary or secondary. However, depending on the nature of your research, you may not have to provide the same level of detail as you would with a primary-based study.

For example, if you’re analysing two particular pieces of literature, then you probably need to clarify how you approached the analysis process, how you use the texts (whether you focus on particular passages, for example) and perhaps why these texts are scrutinised, as opposed to others from the relevant literary canon.

In such cases, the methodology may not be a chapter, but might constitute a small part of the introduction. Consult your supervisor for further guidance.

Q: Should the methodology be in the first-person or third?

A: It’s important to be consistent , so you should use whatever you’ve been using throughout your dissertation. Third-person is more commonly accepted, but certain disciplines are happy with the use of first-person. Just remember that the first-person pronoun can be a distracting, but powerful device, so use it sparingly. Consult your supervisor for further guidance.

It’s important to remember that all research is different and, as such, the methodology chapter is likely to be very different from dissertation to dissertation. Whilst this guide has covered the most common and essential layers featured in a methodology, your methodology might be very different in terms of what you focus on, the depth of focus and the wording used.

What’s important to remember, however, is that every methodology chapter needs to be structured in a linear, layered way that guides the reader through the methodological process in sequential order. Through this, your marker can see how certain decisions have impacted on others, showing your understanding of the research process.

Here’s a final checklist for writing your methodology. Remember that not all of these points will be relevant for your methodology, so make sure you cover whatever’s appropriate for your dissertation. The asterisk (*) indicates any content that might not be relevant for your dissertation. You can download a copy of the checklist to save and edit via the Word document, below.

• Methodology self-evaluation checklist

• << Previous: The Literature Review
• Next: The Results and Discussion >>
• Last Updated: Apr 19, 2024 12:38 PM
• URL: https://library.soton.ac.uk/writing_the_dissertation

How Do I Write the Methods Chapter?

Methods, Participants, and Describing Data Analysis

• First Online: 19 October 2023

Cite this chapter

• Sue Reeves   ORCID: orcid.org/0000-0002-3017-0559 3 &
• Bartek Buczkowski   ORCID: orcid.org/0000-0002-4146-3664 4  

353 Accesses

The methods chapter is where you describe what you did to collect and analyse your data. This book chapter will outline what the methods chapter should cover, potential differences in the styles between experiments, surveys, literature reviews, and audits. The different sections the methods chapter typically has including design, sample, measures, ethics and data analysis paragraphs, will be outlined, and there are also some general tips for writing your methods chapter in a scientific manner.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

• Available as EPUB and PDF
• Read on any device
• Instant download
• Own it forever
• Compact, lightweight edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Boynton PM (1998) People should participate in, not be subjects of research. Br Med J 317:1521. https://doi.org/10.1136/bmj.317.7171.1521a

Article   CAS   Google Scholar  

Braun VC (2006) Using thematic analysis in psychology. Qual Res Psychol 3:77–101. https://doi.org/10.1191/1478088706qp063oa

Article   Google Scholar  

Centre for Evidence-Based Medicine (2016) Study designs . https://www.cebm.net/2014/04/study-designs/

Cherry K (2022) How to write an APA method section of a research paper. https://www.verywellmind.com/how-to-write-a-method-section-2795726

Johnson S, Scott J (2019) Study and communication skills for the biosciences. Oxford University Press

Book   Google Scholar  

Ranganathan P, Aggarwal R (2018) Study designs: part 1–an overview and classification. Perspect Clin Res 9:184–186. https://doi.org/10.4103/picr.PICR_124_18

Article   PubMed   PubMed Central   Google Scholar  

Shorten A, Smith J (2017) Mixed methods research: expanding the evidence base. Evid Based Nurs 20:74–75

Article   PubMed   Google Scholar  

Smith V, Devane D, Begley CM et al (2011) Methodology in conducting a systematic review of systematic reviews of healthcare interventions. BMC Med Res Methodol 11:15. https://doi.org/10.1186/1471-2288-11-15

World Medical Association (2022) WMA Declaration of Helsinki–Ethics Principals for Medical Research Involving Human Subjects. https://www.wma.net/policies-post/wma-declaration-of-helsinki-ethical-principles-for-medical-research-involving-human-subjects/ . Accessed 23 Jan 2023

Further Reading

For more general information on research methodologies:

Google Scholar  

Kumar R (2019) Research methodology–a step by step guide for beginners. Sage, Thousand Oaks, Ca

For qualitative methods in particular:

Durdella N (2018) Qualitative dissertation methodology–a guide for research design and methods. Sage, Thousand Oaks, Ca

For power calculations:

Jones SR, Carley S, Harrison M (2003) An introduction to power and sample size estimation. Emerg Med J 20:453–458

Article   CAS   PubMed   PubMed Central   Google Scholar  

For help with statistics:

Petrie A, Sabin C (2019) Medical statistics at a glance, 4th edn. Wiley Blackwell, Oxford

Download references

Author information

Authors and affiliations.

University of Roehampton, London, UK

Manchester Metropolitan University, Manchester, UK

Bartek Buczkowski

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Reprints and permissions

Copyright information

© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this chapter

Reeves, S., Buczkowski, B. (2023). How Do I Write the Methods Chapter?. In: Mastering Your Dissertation. Springer, Cham. https://doi.org/10.1007/978-3-031-41911-9_7

Download citation

DOI : https://doi.org/10.1007/978-3-031-41911-9_7

Published : 19 October 2023

Publisher Name : Springer, Cham

Print ISBN : 978-3-031-41910-2

Online ISBN : 978-3-031-41911-9

eBook Packages : Biomedical and Life Sciences Biomedical and Life Sciences (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

Library Guides

Dissertations 4: methodology: start.

• Introduction & Philosophy
• Methodology

The Methodology Chapter

The methodology chapter flows organically from the literature review. This means that at this stage you should have reviewed the literature in your field of study, analysed research that has been conducted and highlighted how it was conducted. In turn, this should reflect the foundation of your own project as you will have to link it to your chosen research method.  

The methodology chapter also involves describing your method in detail and justifying the approach you are going to adopt, taking into consideration the limitations and ethical implications of your model. Your description should be detailed enough that someone reading your methodology can recreate your approach. 

Therefore, the methodology requires you to:

• describe your methods
• demonstrate a clear connection between your research question (or hypothesis) and the means by which you will reach your conclusions 
• present justification (strengths) and limitations (weaknesses) of your methods  

What are Methods & Methodology?

Methods 

In order to appreciate what methods are, let us remember what research is about. Research can be summarised into three points (Cottrell, 2014, p9): 

A question 

Methods of arriving at an answer 

The answer 

Thus, methods are the means to research and answer the research question, or test the hypothesis. Methods include techniques and procedures used to obtain and analyse data (Saunders, Lewis and Thornhill, 2015, p4). Your methods can consist of primary and secondary sources, qualitative, quantitative and mixed methods, as illustrated in this guide.  

Methodology 

Methodology is sometimes used interchangeably with methods, or as the set of methods used in a research. More specifically, as the name would suggest, methodo-logy is the logos, the reasoning, on the methods. It is also referred to as the theory of how research should be undertaken (Saunders, Lewis and Thornhill, 2015, p4). This is why you normally would have a methodology, rather than methods, chapter in a dissertation.  

First Key Tip

We hope this guide will be helpful, but it is of fundamental importance that you also use a  research methods book  (or other authoritative source) for your discipline . The book will guide you on best methods for your research, give you practical guidance, and present critical insights and limitations of the methods.

• Next: Structure >>
• Last Updated: Sep 14, 2022 12:58 PM
• URL: https://libguides.westminster.ac.uk/methodology-for-dissertations

CONNECT WITH US

Dissertations: Writing Chapters

• Choosing a topic
• Research Proposal
• Reviewing the literature
• Introductions & Conclusions

Writing Chapters

• Wrapping Up
• Abstracts & Summaries
• Managing Expectations

As part of your dissertation you will find that you need to write different types of chapters. In this guide we take you through those types, how to structure them. how to write them and some dos and dont's. Click on the links below to jump to the section you need.

• Writing a methodology chapter

Writing a results chapter

• Writing a discussion chapter

Writing a Methodology Chapter

What is a dissertation methodology.

• Structuring your methodology
• Dos and don’ts

A well-written methodology chapter is essential in establishing the credibility and validity of your research, as it allows other researchers to reproduce your study and build upon your findings . In this guide, we will provide you with step-by-step instructions on how to write a comprehensive and well-organized methodology chapter that will effectively communicate the methodology you used in your research. 

• The methodology explains your methodological approach and explains what you did and how , and why .
• The methodology section allows the reader to critically evaluate a study's overall credibility . 
• The purpose is to give another researcher enough information to replicate the study and obtain similar results.
• Methods and methodology are not synonyms (overarching approach vs  specific tools and procedures used to collect and analyse data).

The methodology chapter, as any other chapters of your dissertation except the introduction and conclusion chapters, consists of 3 main sections: introduction, main body and conclusion/summary.

[Adapted from: Succeeding with your Master’s Dissertation: A step-by-step handbook ]

The sections included in the main body depend on the type of research and the type of dissertation. For example:

• In the traditional dissertation , it is commonly a separate chapter preceding the Results chapter.
• In topic-based dissertations , the Methodology chapter might have a different title such as ‘Conducting Research’.
• In experiment-based or dissertations by compilation , each study or experiment might contain its own methodology or methods section. 

Step 1: Explain your research design/approach

This commonly includes a restatement of the research aim(s) , a justification of choice of research methods , overview of specific method(s) used .

Step 2: Explain your methods of data collection

This involves explaining how the research was conducted and how the data were obtained . It requires a detailed description of processes and procedures and a justification of the reasons for doing so . This might include describing:

• How was the data collection tool designed
• How participants were obtained and how was the sample drawn
• The location in which the data collection took place
• The themes covered during the data collection or any variables and measures
• Any piloting, adjustments made and reasons behind those
• Ethical considerations and any obstacles faced and how those were addressed

Step 3: Explain your methods of data analysis

This involves explaining how you processed and analysed the data. However, do not start discussing the results unless you are combining results and discussion into one chapter (commonly seen in qualitative research). For example, you might want to include:

• How you prepared the data before analysis (e.g., checking for missing data, removing outliers)
• The software used to analyse the data (e.g., SPSS, Atlas.ti)
• The methods used to analyse the data (e.g., regression analysis, thematic analysis)

[Adapted from: https://www.scribbr.co.uk/thesis-dissertation/methodology/ AND Thesis and Dissertation Writing in a Second Language: A Handbook for Students and their Supervisors ] 

For more information on language used in methodology chapters have a look at our page  Language used in dissertations . 

Writing a Results Chapter

• What is a results chapter?
• Structuring your results
• Presenting your results
• Using tables & figures

The results chapter is a crucial section of any piece of research, as it presents and interprets the findings obtained from the study. This chapter allows you to communicate the outcomes of your investigation, analyse the data, and draw meaningful conclusions . Crafting an effective results chapter requires careful planning, organization, and attention to detail. This guide aims to provide you with a step-by-step approach to writing a results chapter that effectively communicates your research findings.

• The results section of your dissertation is where you report the findings of your study based upon the information gathered as a result of the methodology you applied.
• The results section should simply state the findings , without bias or interpretation, and arranged in a logical sequence . 
• The results section should always be written in the past tense . 
• The page length of this section is set by the amount and types of data to be reported. Try to be concise and use non-textual elements .
• Avoid providing data that is not critical to answering the research question(s). 

The results chapter, as any other chapters of your dissertation except the introduction and conclusion chapters, consists of 3 main sections: introduction, main body and conclusion/summary.

Introduction

This might include:

• A brief reminder of the methodological approach or methods.
• A preview of the chapter: outline the organisation and state the scope (What is included? How is the chapter organised?)

The order of results can vary.  Some suggestions are:

• From most important to least important.
• As a logical response to the research questions or problems you are trying to answer or solve.  
• If you are using a range of methods or a number of experimental elements , group the method/procedure together with the relevant results. 
• In quantitative research , the descriptive statistics are generally presented first, then the results of each of the hypotheses or research questions that were tested.
• The information in the results section should be organised to show how the data tests the research questions or hypotheses , and should be presented sequentially to respond to each research question or hypothesis.

Conclusion or Chapter Summary

• A brief summary of the key results.
• Signpost how these will be discussed in the following chapter (leads to your discussion chapter).

Describe the findings of the study, but do not start to interpret the results . This will take place in the discussion section, which comes next, unless you decide to combine results and discussion, which is common in qualitative research.

Presenting Qualitative Results

• Structure your results around key themes .
• For each theme, make general observations about what the data showed.
• Support these points with direct quotations .
• If possible, include a brief conclusion (‘so what?’) to the observation and highlight any links with other findings.
• Repeat this process as many times as necessary.
• Further information can be included in an appendix .

Presenting Quantitative Results

• Structure your results around your research sub-questions .
• For each sub-question, present the relevant results , including any statistical analysis you conducted, and briefly evaluate their significance. 
• Highlight the most important trends , differences, and relationships among the data, but do not speculate on their meaning or consequences.
• If you have results that are not directly relevant to answering your questions, or any extra information that will help the reader understand how you gathered the data, you can include them in an appendix .

The description of tables and figures in academic written texts commonly includes two different elements:

• Location or summary statement: identifies the table or figure and indicates its content.
• Highlighting statement or statements: point out and describe the relevant or significant data.

Dos and don'ts of using tables and figures

For more information on the language used in results chapters see the Language section of this guide.

You can use the checklist below to ensure your results chapter includes all relevant information:

Writing a Discussion Chapter

What is a discussion chapter.

• Structuring your discussion
• Dos and don'ts

The discussion chapter of a dissertation is an essential component that showcases your ability to analyse and interpret your research findings, draw meaningful conclusions, and provide valuable insights into the broader academic and practical implications of your study. This guide aims to provide you with a comprehensive overview of how to write a compelling and well-structured discussion chapter that strengthens the overall impact of your dissertation.

• Explains what the results mean;
• Interprets and discusses the data;
• Compares it with other research (literature review);
• Evaluates its importance;
• Points out the limitations of your research;
• Raises questions for future directions .

Tip: When writing your discussion chapter, you might want to revisit your literature review chapter and ensure that the relevant literature included in this chapter has been already presented in the Literature Review.

The discussion chapter, as any other chapters of your dissertation except the introduction and conclusion chapters, consists of 3 main sections: introduction, main body and conclusion/summary.

[Adapted from: Succeeding with your Master’s Dissertation: A step-by-step handbook ]  

Your discussion should focus on explaining and evaluating your findings, displaying their connection to the previous literature (i.e., your literature review ) and research questions , as well as presenting a persuasive argument to support your overall conclusion.  While there are many different ways to write this section, you can focus your discussion around three key aspects:

• Interpretations: What is the meaning behind the results?
• Implications: Why do the results matter? Why are the results relevant?
• Limitations: What can’t the results tell us? What are the constraints or limitations of the results in terms of what they can reveal?

This can be done following the 5 steps below:  

Step 1: Summarise your findings

You can begin this section by reiterating your research problem and providing a succinct overview of your main findings. Do not just repeat all the data that you have already reported in the previous chapter, instead present a clear statement that directly addresses your research questions.

Step 2: Interpret your findings

While the significance of your results may appear apparent to you, it is crucial to explicitly articulate their importance for your reader by demonstrating how they directly address your research question. The manner in which you interpret the data will vary depending on the type of research conducted. However, some common approaches to interpreting the data include:

• Recognizing correlations, patterns, and relationships within the data
• Analysing whether the results align with your expectations or support your hypotheses
• Placing your findings within the context of prior research and established theories
• Elucidating unexpected results and assessing their significance
• Considering alternative explanations and presenting a compelling argument in favour of your position.

Step 3: Place your findings in context (literature review)

A helpful way to place your findings within context and identifying how your findings agree or disagree with the previous literature is to use a summary table such as the one below:

This can result in a paragraph like: The importance of timely feedback in block has also been stressed by students and faculty as one of the reasons as to why single assessments at the end of the module, and more specifically exams, are the least accurate method in block delivery. Although exams were considered by some participants as necessary in certain disciplines, participants agreed that this assessment type does not show knowledge depth as indicated by Dang et al. (2022) and students might receive limited or no feedback as highlighted by Race (2015). Therefore, incorporating frequent and a variety of assessments with timely feedback into block delivery could enhance student learning outcomes and improve the accuracy of assessments.

Step 4: Acknowledge the limitations

Every piece of research has limitations and acknowledging these is crucial for establishing the credibility of the study. The purpose of discussing these limitations is not to highlight errors, but rather to provide an accurate understanding of the conclusions that can and cannot be drawn from the study, as well as to highlight further areas for research on the topic. Limitations might relate to your research design, methodological choices, or unforeseen challenges encountered during the research process. Here are some examples:

• If the sample size was small or limited to a specific group of individuals, it is necessary to explain how the generalizability of the findings is constrained.
• If difficulties were encountered during data collection or analysis, it is important to elucidate how these challenges might have impacted the results.
• If there are potential confounding variables that could not be controlled, it is essential to acknowledge the potential effects they might have had.

[Adapted from: https://www.scribbr.co.uk/thesis-dissertation/discussion/ ]

For more information on the language used in discussions, have a look at our  Language used in dissertations guide

Further Reading

Journal of Suffolk Student Research

The Journal of Suffolk Student Research is an online academic journal, dedicated to the publication of high-quality undergraduate and postgraduate student research undertaken by University of Suffolk students. The journal will showcase the most outstanding student research undertaken at the University of Suffolk. It aims to promote and recognise this outstanding student research by offering valuable early experience of academic publishing and the peer review process. 

Find out more here

• << Previous: Introductions & Conclusions
• Next: Wrapping Up >>
• Last Updated: Feb 1, 2024 4:22 PM
• URL: https://libguides.uos.ac.uk/dissertations

➔ About the Library

➔ Meet the Team

➔ Customer Service Charter

➔ Library Policies & Regulations

➔ Privacy & Data Protection

Essential Links

➔ A-Z of eResources

➔ Frequently Asked Questions

➔Discover the Library

➔Referencing Help

➔ Print & Copy Services

➔ Service Updates

Library & Learning Services, University of Suffolk, Library Building, Long Street, Ipswich, IP4 1QJ

✉ Email Us: [email protected]

✆ Call Us: +44 (0)1473 3 38700

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• What Is a Research Methodology? | Steps & Tips

What Is a Research Methodology? | Steps & Tips

Published on 25 February 2019 by Shona McCombes . Revised on 10 October 2022.

Your research methodology discusses and explains the data collection and analysis methods you used in your research. A key part of your thesis, dissertation, or research paper, the methodology chapter explains what you did and how you did it, allowing readers to evaluate the reliability and validity of your research.

It should include:

• The type of research you conducted
• How you collected and analysed your data
• Any tools or materials you used in the research
• Why you chose these methods
• Your methodology section should generally be written in the past tense .
• Academic style guides in your field may provide detailed guidelines on what to include for different types of studies.
• Your citation style might provide guidelines for your methodology section (e.g., an APA Style methods section ).

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to write a research methodology, why is a methods section important, step 1: explain your methodological approach, step 2: describe your data collection methods, step 3: describe your analysis method, step 4: evaluate and justify the methodological choices you made, tips for writing a strong methodology chapter, frequently asked questions about methodology.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Your methods section is your opportunity to share how you conducted your research and why you chose the methods you chose. It’s also the place to show that your research was rigorously conducted and can be replicated .

It gives your research legitimacy and situates it within your field, and also gives your readers a place to refer to if they have any questions or critiques in other sections.

You can start by introducing your overall approach to your research. You have two options here.

Option 1: Start with your “what”

What research problem or question did you investigate?

• Aim to describe the characteristics of something?
• Explore an under-researched topic?
• Establish a causal relationship?

And what type of data did you need to achieve this aim?

• Quantitative data , qualitative data , or a mix of both?
• Primary data collected yourself, or secondary data collected by someone else?
• Experimental data gathered by controlling and manipulating variables, or descriptive data gathered via observations?

Option 2: Start with your “why”

Depending on your discipline, you can also start with a discussion of the rationale and assumptions underpinning your methodology. In other words, why did you choose these methods for your study?

• Why is this the best way to answer your research question?
• Is this a standard methodology in your field, or does it require justification?
• Were there any ethical considerations involved in your choices?
• What are the criteria for validity and reliability in this type of research ?

Once you have introduced your reader to your methodological approach, you should share full details about your data collection methods .

Quantitative methods

In order to be considered generalisable, you should describe quantitative research methods in enough detail for another researcher to replicate your study.

Here, explain how you operationalised your concepts and measured your variables. Discuss your sampling method or inclusion/exclusion criteria, as well as any tools, procedures, and materials you used to gather your data.

Surveys Describe where, when, and how the survey was conducted.

• How did you design the questionnaire?
• What form did your questions take (e.g., multiple choice, Likert scale )?
• Were your surveys conducted in-person or virtually?
• What sampling method did you use to select participants?
• What was your sample size and response rate?

Experiments Share full details of the tools, techniques, and procedures you used to conduct your experiment.

• How did you design the experiment ?
• How did you recruit participants?
• How did you manipulate and measure the variables ?
• What tools did you use?

Existing data Explain how you gathered and selected the material (such as datasets or archival data) that you used in your analysis.

• Where did you source the material?
• How was the data originally produced?
• What criteria did you use to select material (e.g., date range)?

The survey consisted of 5 multiple-choice questions and 10 questions measured on a 7-point Likert scale.

The goal was to collect survey responses from 350 customers visiting the fitness apparel company’s brick-and-mortar location in Boston on 4–8 July 2022, between 11:00 and 15:00.

Here, a customer was defined as a person who had purchased a product from the company on the day they took the survey. Participants were given 5 minutes to fill in the survey anonymously. In total, 408 customers responded, but not all surveys were fully completed. Due to this, 371 survey results were included in the analysis.

Qualitative methods

In qualitative research , methods are often more flexible and subjective. For this reason, it’s crucial to robustly explain the methodology choices you made.

Be sure to discuss the criteria you used to select your data, the context in which your research was conducted, and the role you played in collecting your data (e.g., were you an active participant, or a passive observer?)

Interviews or focus groups Describe where, when, and how the interviews were conducted.

• How did you find and select participants?
• How many participants took part?
• What form did the interviews take ( structured , semi-structured , or unstructured )?
• How long were the interviews?
• How were they recorded?

Participant observation Describe where, when, and how you conducted the observation or ethnography .

• What group or community did you observe? How long did you spend there?
• How did you gain access to this group? What role did you play in the community?
• How long did you spend conducting the research? Where was it located?
• How did you record your data (e.g., audiovisual recordings, note-taking)?

Existing data Explain how you selected case study materials for your analysis.

• What type of materials did you analyse?
• How did you select them?

In order to gain better insight into possibilities for future improvement of the fitness shop’s product range, semi-structured interviews were conducted with 8 returning customers.

Here, a returning customer was defined as someone who usually bought products at least twice a week from the store.

Surveys were used to select participants. Interviews were conducted in a small office next to the cash register and lasted approximately 20 minutes each. Answers were recorded by note-taking, and seven interviews were also filmed with consent. One interviewee preferred not to be filmed.

Mixed methods

Mixed methods research combines quantitative and qualitative approaches. If a standalone quantitative or qualitative study is insufficient to answer your research question, mixed methods may be a good fit for you.

Mixed methods are less common than standalone analyses, largely because they require a great deal of effort to pull off successfully. If you choose to pursue mixed methods, it’s especially important to robustly justify your methods here.

Prevent plagiarism, run a free check.

Next, you should indicate how you processed and analysed your data. Avoid going into too much detail: you should not start introducing or discussing any of your results at this stage.

In quantitative research , your analysis will be based on numbers. In your methods section, you can include:

• How you prepared the data before analysing it (e.g., checking for missing data , removing outliers , transforming variables)
• Which software you used (e.g., SPSS, Stata or R)
• Which statistical tests you used (e.g., two-tailed t test , simple linear regression )

In qualitative research, your analysis will be based on language, images, and observations (often involving some form of textual analysis ).

Specific methods might include:

• Content analysis : Categorising and discussing the meaning of words, phrases and sentences
• Thematic analysis : Coding and closely examining the data to identify broad themes and patterns
• Discourse analysis : Studying communication and meaning in relation to their social context

Mixed methods combine the above two research methods, integrating both qualitative and quantitative approaches into one coherent analytical process.

Above all, your methodology section should clearly make the case for why you chose the methods you did. This is especially true if you did not take the most standard approach to your topic. In this case, discuss why other methods were not suitable for your objectives, and show how this approach contributes new knowledge or understanding.

In any case, it should be overwhelmingly clear to your reader that you set yourself up for success in terms of your methodology’s design. Show how your methods should lead to results that are valid and reliable, while leaving the analysis of the meaning, importance, and relevance of your results for your discussion section .

• Quantitative: Lab-based experiments cannot always accurately simulate real-life situations and behaviours, but they are effective for testing causal relationships between variables .
• Qualitative: Unstructured interviews usually produce results that cannot be generalised beyond the sample group , but they provide a more in-depth understanding of participants’ perceptions, motivations, and emotions.
• Mixed methods: Despite issues systematically comparing differing types of data, a solely quantitative study would not sufficiently incorporate the lived experience of each participant, while a solely qualitative study would be insufficiently generalisable.

Remember that your aim is not just to describe your methods, but to show how and why you applied them. Again, it’s critical to demonstrate that your research was rigorously conducted and can be replicated.

1. Focus on your objectives and research questions

The methodology section should clearly show why your methods suit your objectives  and convince the reader that you chose the best possible approach to answering your problem statement and research questions .

2. Cite relevant sources

Your methodology can be strengthened by referencing existing research in your field. This can help you to:

• Show that you followed established practice for your type of research
• Discuss how you decided on your approach by evaluating existing research
• Present a novel methodological approach to address a gap in the literature

3. Write for your audience

Consider how much information you need to give, and avoid getting too lengthy. If you are using methods that are standard for your discipline, you probably don’t need to give a lot of background or justification.

Regardless, your methodology should be a clear, well-structured text that makes an argument for your approach, not just a list of technical details and procedures.

Methodology refers to the overarching strategy and rationale of your research. Developing your methodology involves studying the research methods used in your field and the theories or principles that underpin them, in order to choose the approach that best matches your objectives.

Methods are the specific tools and procedures you use to collect and analyse data (e.g. interviews, experiments , surveys , statistical tests ).

In a dissertation or scientific paper, the methodology chapter or methods section comes after the introduction and before the results , discussion and conclusion .

Depending on the length and type of document, you might also include a literature review or theoretical framework before the methodology.

Quantitative research deals with numbers and statistics, while qualitative research deals with words and meanings.

Quantitative methods allow you to test a hypothesis by systematically collecting and analysing data, while qualitative methods allow you to explore ideas and experiences in depth.

A sample is a subset of individuals from a larger population. Sampling means selecting the group that you will actually collect data from in your research.

For example, if you are researching the opinions of students in your university, you could survey a sample of 100 students.

Statistical sampling allows you to test a hypothesis about the characteristics of a population. There are various sampling methods you can use to ensure that your sample is representative of the population as a whole.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). What Is a Research Methodology? | Steps & Tips. Scribbr. Retrieved 14 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/methodology/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a dissertation proposal | a step-by-step guide, what is a literature review | guide, template, & examples, what is a theoretical framework | a step-by-step guide.

• Customer Reviews
• Extended Essays
• IB Internal Assessment
• Theory of Knowledge
• Literature Review
• Dissertations
• Essay Writing
• Research Writing
• Assignment Help
• Capstone Projects
• College Application
• Online Class

How to Write the Methodology Chapter: The Complete Guide

by  Antony W

April 20, 2022

In this lesson, you’ll learn how to write the methodology chapter of a thesis, dissertation, or a research paper, step-by-step. So if you’ve reached this section in your assignment and you simply no idea how to proceed, this article will point you in the right direction.

You’ll learn what the methodology chapter is about and how you can go about writing one by following a systematic approach guaranteed to help you complete the project faster.

By definition, the methodology chapter of a thesis, dissertation, or research paper is the section where you explain about the specific research design options used in your research. It’s in the methodology chapter that you explain the process you used to design your research and give a justification for the research design.

In other words, the methodology section should clearly demonstrate:

• Whether you conducted quantitative or qualitative research
• The approach you used to collect the data
• What your approach to analyzing the data was and
• The kind of sampling that you did

With that said, let’s get into more details on dealing with the methodology chapter of your research work.

What is the Methodology Chapter for a Research Paper and Dissertation?

In your methodology chapter, you’ll explain the conceptual foundations of your study as well as the specific research design decisions you’ve made. The purpose of this chapter is to explain how you designed your research. 

There are two reasons why your research paper, thesis, and dissertation should have a methodology section:

• It shows that you understand the concept of research design theory, that you understand what you’re doing in research, and that the results you’ll present have a high degree of credibility.
• Because it outlines the steps you took to do and analyze your research, the methodology chapter is what sets your study apart from the others. It also allows you to identify and describe any methodological concerns or problems that you ran into, as well as explain how you dealt with them.

How to Write The Methodology Chapter – Step-by-Step

It’s worth mentioning that the methodology chapter’s specific format and contents will differ based on the study topic and the university. We strongly recommend that you check with your professor to find out what structure they would like you to use.

More often than not, they will allow you to use the standard structure for your paper, which should make the writing process easier for you. Ideally, the methodology chapter of your research paper, thesis, or dissertation should have the following sections:

• Introduction
• Research design
• Methodological limitation
• A concluding summary

Let’s look at each section in more details below:

The Introduction

The methodology chapter should contain a brief introduction of your dissertation or thesis. You should remind your readers about the emphasis of your study, particularly the research objectives.

Your research design must correspond with your research aims, objectives, and research questions, so include this up front to remind the reader what you intend to accomplish with your research design.

We strongly recommend that you explain how you’ve organized the chapter. Doing so will make it easy for the reader to have a clear roadmap of what to expect from reading the rest of the section of your methodology chapter.

Research Design

We like to refer to research design as the heart of the methodology chapter because it presents your research design in great depth to the reader. The information you provide here should be good enough to justify the design choices you made for your paper.

Here’s how to approach it: 

1. Describe Your Methodological Approach

Start by explaining the research subject or problem you looked into. It could be that you wanted to methodically define something’s qualities, investigate a little-studied issue, or prove a cause-and-effect relationship. Whatever it is, write it down because it will guide your reader throughout the other section of the research design.

Some questions to think about when working on your methodological approach include:

• Did you require quantitative or qualitative data?
• Was it necessary for you to obtain primary data personally, or did you rely on secondary data gathered by others?
• Did you collect descriptive data by gathering observations without intervening, or did you collect experimental data by altering variables?
• Were there any ethical factors involved in your decision-making?

2. Explain Your Methods of Data Collection

Next step in research design is to explain the data collection method you used to gather information for your research project.

The following table is a summary of the data collection methods as used in research writing:

3. Explain Your Data Analysis Methods

The next step is to describe how you processed and analyzed the data.

• Quantitative analysis: Your analysis in quantitative research will be on numbers. You may include how you prepared the data for analysis, the computer software you used, and the statistical you employed.
• Qualitative analysis:   Your analysis in qualitative research will be based on language, visuals, and observations (often involving some form of textual analysis).

4. Methodological Limitations 

You can admit to the approach’s limits or flaws, but explain why the advantages exceeded the disadvantages. Explain why prior strategies were ineffective in achieving your goals, and how this strategy adds new information or insight.

Your methodology should be a well-structured, unambiguous document that argues for your approach rather than a collection of technical information and processes.

About the author 

Antony W is a professional writer and coach at Help for Assessment. He spends countless hours every day researching and writing great content filled with expert advice on how to write engaging essays, research papers, and assignments.

• Doctoral Writing Center
• Doctoral Support

What is the Methods Chapter?

This chapter provides information on what you did and how you did it over the course of your research. Essentially, this chapter will list the steps you followed to help you answer your research questions and determine the accuracy of your hypotheses. A goal to have in mind when you are writing this chapter is to be detailed enough so that a colleague reading through the steps of your study could replicate your research without needing additional information. It is important that as you write your methods section, you ensure alignment with other sections of your dissertation.

(Important note: Remember that in this chapter, you are not getting into your findings or the results from your study. This is only to explain the process you used to obtain these results)

Before you Begin

What tense should i use in this chapter.

By the time you are writing this chapter of your dissertation, you should have completed your research. Thus, you will write the methods chapter in past tense .

Organization

Consider organizing this chapter in the following manner: 1. Introductory paragraph including general research design and organization of chapter 2. Data collection methods (how did you gather your data?) 3. Data analysis methods (how did you analyze your data?)

1. What do I Include in my Introductory Paragraph?

As is the intent of any introduction paragraphs, this paragraph will provide your readers with context for the research you conducted and provide them with an understanding of what will follow it. Consider incorporating the following information:

Reference to the Aim: Consider starting this paragraph by referencing the overall aim/purpose of your research. Be careful not to go into too much detail about why this was your aim or why this purpose matters. This information will be added to other chapters. Here stick to one sentence.

Research Design Statement: In one to two sentences, describe the research design you used for this study. There are a variety of research design approaches; for additional support on this topic, see here. If you are using a specific type of quantitative or qualitative design (ex: quasi experimental, case study), consider also stating this in your introduction.

Quantitative

Study Information: Emailed a survey to 200 undergraduate educators who just finished teaching their first classes to determine how effective their program was at preparing them for the role itself.

Statement: This study used a cross-sectional survey design to assess how prepared first-time undergraduate educators felt after teaching their initial courses.

Qualitative

Study Information: Interviewed 35 students who participated in a study incorporating the wise intervention strategy to their feedback to determine perception of bias.

Statement: This study used a narrative research design to identify how the wise intervention strategy influenced the perception of bias in freshman students at the university level.

Organization of the Chapter: Add a statement or two describing what information the reader will find in this chapter and how it is organized.

2. What do I Include in the Data Collections Section?

This section will be dedicated to explaining to your readers how you collected the data that you needed in order to answer your research questions and verify the accuracy of your hypotheses (if applicable). The way you organize this information may vary, but ensure you have the following information available.

When explaining your sample, ensure you identify who the target population was, the size and demographics of your sample, the location of sample participants, and the sampling design you used to obtain your sample. Pay attention to justifying the rationale for the decisions you made in this section, and provide relevant citations to support these decisions.

(Note: For advice on how to avoid bias when referring to people or groups in this section, see this tutorial , for advice on selecting your sample, please see here ).

Instruments/Collection Method

In this section, you are both indicating the measures you used to answer your research questions and how they will measure the focus of your research (variables, cause-effect relationship, etc.). Data collection methods can include interviews, surveys, archival data, focus groups, ethnography, and much more. If you are using assessments or other instruments (ex: standardized interview protocols) as part of your data collection methods, information should be provided about the instruments themselves (reliability and validity in your population and in measuring your variables) and the relevancy for use in your study. For additional information on methods, please see here .

For qualitative research: Explain the appropriateness of the measure you chose (how did you ensure you were selecting the ‘best’ option?), the measurement characteristics of the instrument(s), and the administration and scoring of the measures. (See here for further information).

For qualitative research: Explain the training and practice of the observer, indicate instrument type (structured or unstructured), and include opening questions as well as examples of some sub-questions for your research. (Include the full set of questions used as an appendix). (See here for further information)

In this section, you will explain how you implemented your methods. Consider aspects such as what steps you took to contact your sample (or access your data), to gain their participation, to protect their anonymity/ensure confidentiality or any other ethical considerations you made, and how you administered the instruments.

(Note: If you provided participants with any documentation (recruitment letter, survey, etc., copies of these should be added as appendixes).

Example of a research project:

Study was conducted with undergraduate students to test the effectiveness of the wise interventional strategy approach in feedback on the perception of positive bias., some examples of what i would consider writing in this section include:.

Note: By the time you finish writing this section, your reader should be able to know when, where, and how you collected the data.

Step: Pre-contact

Information Included: How I chose the educator(s) I worked with, selected the classes (and when they ran), identified the assignment to use, created a benefit for student participant (extra credit/mandatory participation/etc.), information I needed to collect from the students, if the instructor would see the feedback provided to students, if I needed the school’s approval and the instructors or just the instructor, and more

Step: Contact

Information Included: How much information the educator provided to the students before the study (protect the validity of the results), how the students opted into the study

Step: Process

Information Included: How I set up the study so that the reviews of the assignments were blind reviews, how I protected student anonymity when providing feedback, how I stored the data, the timeline of providing feedback, the timeline of when students could submit revised versions for grading, the rubric used to assess grading, and how I collected revisions from the instructor.

3. What do I Include in My Data Analysis Section?

In this section, you will explain how you analyzed your data. Ensure that you are not getting into the results of what your analysis determined. You are only explaining how you analyzed the data in this section.

For quantitative research: Explain what you did prior to the analysis (did you have to sift through to remove any outliers, did you have to ensure you were not missing data, etc.), how you conducted the analysis (what software or tool did you use), what test did you use (T-test, linear regression, etc.), and what equation did you use within the test construct. Indicate what information that analysis provided you (ex: determining relationships, causal links).

For qualitative research: Explain what you did after collecting the responses from your participants. It is important that you outline the process you will use to analyze the data (ex: inductive analysis, discourse analysis), any coding methods, or tools that will be used to classify the data. Typically, people will transcribe their responses, identify a type of analysis (thematic, content, discourse), and code the information to determine patterns and relationships. It is also important to outline how the researcher will avoid bias in their analysis of the data.

Did I Include All of the Information I Need?

To double-check if you have added all of the information you need, please see this checklist as a guide. (Note: this is to help you self-assess in general but is not meant to be an exhaustive list – download to check off the boxes as you go). It is also a good idea to do one last check for alignment with your other chapters!

Please see the following tutorials created by methodologists to support you in the curation of this chapter. • How to Write the Methodology Section • Quantitative Studies: Methodology Considerations • Qualitative Studies: Methodology Considerations

• Technical Support
• Find My Rep

You are here

Qualitative Dissertation Methodology A Guide for Research Design and Methods

• Nathan Durdella - California State University, Northridge, USA
• Description

Designing and writing a qualitative dissertation methodology chapter can be done!

Qualitative Dissertation Methodology: A Guide for Research Design and Methods functions as a dissertation advisor to help students construct and write a qualitative methodological framework for their research. Drawing from the challenges author Nathan Durdella has experienced while supervising students, the book breaks down producing the dissertation chapter into smaller pieces and goes through each portion of the methodology process step by step. With a warm and supportive tone, he walks students through the process from the very start, from choosing chairs and developing qualitative support networks to outlining the qualitative chapter and delving into the writing. By the end of the book, students will have completed the most challenging chapter of a qualitative dissertation and laid a strong foundation for the rest of their dissertation work. Corresponding videos featuring the author help concepts come alive for your students. Learn more: Developing Skills in Formulating Qualitative Research Questions Key Skills in Writing a Qualitative Research Proposal

Available with Perusall—an eBook that makes it easier to prepare for class! Perusall is an award-winning eBook platform featuring social annotation tools that allow students and instructors to collaboratively mark up and discuss their SAGE textbook. Backed by research and supported by technological innovations developed at Harvard University, this process of learning through collaborative annotation keeps your students engaged and makes teaching easier and more effective. Learn more .

See what’s new to this edition by selecting the Features tab on this page. Should you need additional information or have questions regarding the HEOA information provided for this title, including what is new to this edition, please email [email protected] . Please include your name, contact information, and the name of the title for which you would like more information. For information on the HEOA, please go to http://ed.gov/policy/highered/leg/hea08/index.html .

For assistance with your order: Please email us at [email protected] or connect with your SAGE representative.

SAGE 2455 Teller Road Thousand Oaks, CA 91320 www.sagepub.com

The beauty of this text is it demystifies the process of constructing a qualitative dissertation methodology. This is the big hurdle a student must cross to make it to degree completion...Overall the text is a solid all-in-one qualitative research manual for students in applied and social behavioral science fields. And with more pressure being put on institutions to increase their graduation rates, this text could very well help more students earn their doctorate degrees.

KEY FEATURES:

• The book addresses the unique challenges inherent in qualitative research , such as analyzing and interpreting results and ethics and protecting human research participants.
• A section-by-section approach to methodology chapter development allows readers to develop one part of the methodological framework at a time instead focusing on the dissertation as an overwhelming whole.
• Doctoral student examples from real, interdisciplinary dissertations illustrate the variety of traditions and techniques available in qualitative methodology and make a complete dissertation seem attainable.
• “Key Questions to Ask Yourself” and “Questions for Application” ask students to stop and reflect on the concepts in the book and to take what they have learned and apply it to their own research.
• The book follows the timeline of methodology chapter development so readers can organize their work into manageable steps and operate within the conceptual and tactical work of qualitative dissertation methodology writing.
• Templates to draft qualitative dissertation methodology chapter sections and subsections serve as structured guides to frame design and writing.

Sample Materials & Chapters

Chapter 2: Understanding a Dissertation as Qualitative Methodology

Chapter 3: Framing a Dissertation Study Through a Research Tradition

For instructors

Select a purchasing option, related products.

This title is also available on SAGE Research Methods , the ultimate digital methods library. If your library doesn’t have access, ask your librarian to start a trial .

Lyndon James Defends Dissertation

Lyndon James , doctoral student in Health Policy concentrating in Decision Science, successfully defended his thesis, “Enhancing Health Policy Decisions in Diseases Affecting Disadvantaged Populations: Applied and Methodological Analyses.”  His dissertation committee was chaired by CHDS faculty Nicolas Menzies and included Theodore Cohen , Molly Franke and CHDS’ Ankur Pandya .

James employed three different analytic lenses to improve health policy decisions.  Each chapter focuses on either Rifampicin-resistant Tuberculosis (RR-TB) or Sickle Cell Disease, both of which mainly affect systematically disadvantaged populations.  Chapters one & two both focus on Rifampicin-resistant TB in Moldova.  For this analysis, James built a microsimulation model to estimate the quality-adjusted life expectancy and costs of a six month, four-drug “BPaLM” regimen versus the current standard of care of nine-to-eighteen month regimens.  Compared to longer regimens, he found that six months of the four-drug regimen was cost-effective across a broad range of scenarios and would save Moldova’s national TB program $7.1 million over five years.  Broadly, the six-month, four-drug regimen would also be beneficial with respect to duration of TB disease resistant to key drugs, and lifetime cumulative incidence of acquired drug resistance.

In chapter two, James compared the effectiveness of all-oral regimens containing Bedaquiline against injectable containing regimens, using routinely collected electronic medical records in Moldova. In intention-to-treat analyses, he found that all-oral regimens with Bedaquiline were associated with a higher likelihood of culture conversion in the six months following the initiation of treatment.  He noted that these results add to a growing evidence base in favor of shorter regimens for rifampicin-resistant TB, alongside other empirical and modeling evidence on the tolerability, long-term health outcomes, and cost-effectiveness of these regimens.

For his third chapter, James explored the impact of methodological decisions within distributional cost-effectiveness analysis (DCEA) using an example in Sickle Cell Disease.  DCEA is a modeling approach capable of balancing concerns for efficiency and equity, by giving extra priority to groups who are less well-off. Although interest is growing in applying these methods, guidance for conducting DCEA in the US setting is limited.  James modeled the US population in 2023 and showed that the choice of variables used to stratify the population into equity-relevant groups can affect whether a new Sickle Cell gene therapy would be recommended, even while holding the level of inequality aversion constant.  He noted that this work highlights the need for awareness of the implications of modeling decisions in DCEA, and for consensus on how these analyses are conducted in the US.

Learn more: Read the publication, Impact and Cost-Effectiveness of the 6-Month BPaLM Regimen for Rifampicin-resistant Tuberculosis: A Mathematical Modeling Analysis Learn more: Read the publication, Distributional Cost-Effectiveness of Equity-Enhancing Gene Therapy in Sickle Cell Disease in the United States

Related news: CHDS at 44th North America SMDM Related news: Hsieh and James Receive Raiffa Awards

School of Social Work

• Academic Programs
• Student Resources
• News & Events
• Faculty & Staff
• Request Info

Highfill defends dissertation on military domestic abuse policies

Thursday, May 16, 2024 • Jaelon Jackson :

By Jaelon Jackson School of Social Work

In her remarkable academic journey at The University of Texas at Arlington, Christine Highfill was supported by a dedicated team of mentors and collaborators. 

Her dissertation committee, chaired by Social Work Associate Professor Dr. Rachel Voth Schrag and Social Work Assistant Professor Dr. Donna Schuman, provided invaluable guidance and expertise throughout her research process. Other esteemed members of her committee included Social Work Assistant Professor Dr. Rebecca Mauldin, Social Work Associate Professor Dr. Ling Xu, and Sociology and Anthropology Professor Dr. Beth Anne Shelton.

Highfill's dissertation, under the guidance of her committee, examines the historical changes in laws regarding domestic violence, particularly within the military context. She investigates the current policies within the military and their real-world impact on individuals and families affected by domestic abuse. 

Drawing from her own experiences surviving domestic abuse within the military, Highfill's research is deeply personal and driven by a passion to make a difference in the lives of others facing similar challenges.

"Dr. Highfill's work highlights the importance of considering the unique needs of military families in domestic violence research. She is working to translate what we have learned in civilian survivorship research into the context of military connected families. 

“Her approach can serve as a crucial foundation to build and tailor effective interventions for military connected survivors of intimate partner violence in both civilian and military contexts," Voth Schrag said.

Her dedication to research is evident in her extensive publication record. Highfill has authored 11 articles and two reports, with one article recently accepted for publication and four others currently under review. 

Highfill has also registered six scoping review protocols and is contracted with Oxford Press to write the Encyclopedia of Social Work entry on scoping reviews—a methodology she has mastered to systematically analyze literature on diverse topics.

In addition to her academic pursuits, Highfill is a Licensed Master Social Worker actively engaged in community service. She serves as the data and evaluation coordinator for a local nonprofit agency, facilitating communication between the agency and a national program evaluation firm. 

Moreover, Highfill provides mental health therapy services to community members in North Texas, contributing to the well-being of those she serves.

Highfill reflects on her journey. 

She said Antwan Williams, the School of Social Work’s assistant director of communications, marketing and recruiting and an adjunct assistant professor, was the first person she talked to when looking at if social work was right for her before deciding to start the Master of Social Work program here at UTA. Now she has not only earned her MSW degree but also a Ph.D. in Social Work from UTA.

“You start as one person and end up changed, with the Ph.D. title it represents not just academic success but personal growth," Highfill said.

Schuman says she has worked with Highfill on several research projects focused on improving health and well-being outcomes in military-connected populations. 

“She is a dedicated and intrepid researcher whose passion and commitment to her work shine through in every project she tackles. 

“I look forward to the next chapter of her professional journey and the outstanding contributions she will make toward improving the lives of our military and veteran families," Schuman said.

Highfill's expertise in military-connected domestic violence and abuse has earned her national recognition from The Institute for Military and Veteran Family Wellness. Her commitment to improving policies and support systems for survivors underscores her dedication to creating positive change in both academic and real-world contexts.

In addition to earning her MSW and PhD in Social Work degrees from UTA, Highfill received a Bachelor of Arts degree from Southwest Baptist University majoring in psychology, and a master's degree in human services counseling: military resilience cognate from Liberty University.

Dr. Highfill officially graduated on May 10, marking the culmination of her academic journey and the next step of what surely will be an impactful career.

Stay Connected

• SSW Communications & Marketing Office
• SSW in the Media
• Monthly Newsletters
• Monthly Video News Update
• Courtyard Conversations - Monthly Talk Show
• Marketing Products
• Video Gallery
• Photo Gallery
• SSW Upcoming Events

Address School of Social Work Box 19129 501 W. Mitchell Street Arlington, TX 76019-0129

Phone (Local): 817-272-3181 | (Toll Free): 866-272-3181 Fax : 817-272-5229

The School of Social Work Admissions office is located in Suite 203 in the Social Work and Smart Hospital Building (501 W. Mitchell Street, Arlington, TX 76019).

Follow us on social media

• Faculty/Staff Resources
• Parking Pass Request
• Request Information
• Conference Room/Classroom Reservation
• Special Event Request
• Faculty Academic & Student Affairs Resources

How To Write A Dissertation Introduction

A Simple Explainer With Examples + Free Template

By: Derek Jansen (MBA) | Reviewed By Dr Eunice Rautenbach (D. Tech) | March 2020

If you’re reading this, you’re probably at the daunting early phases of writing up the introduction chapter of your dissertation or thesis. It can be intimidating, I know. 

In this post, we’ll look at the 7 essential ingredients of a strong dissertation or thesis introduction chapter, as well as the essential things you need to keep in mind as you craft each section. We’ll also share some useful tips to help you optimize your approach.

Overview: Writing An Introduction Chapter

• The purpose and function of the intro chapter
• Craft an enticing and engaging opening section
• Provide a background and context to the study
• Clearly define the research problem
• State your research aims, objectives and questions
• Explain the significance of your study
• Identify the limitations of your research
• Outline the structure of your dissertation or thesis

A quick sidenote:

You’ll notice that I’ve used the words dissertation and thesis interchangeably. While these terms reflect different levels of research – for example, Masters vs PhD-level research – the introduction chapter generally contains the same 7 essential ingredients regardless of level. So, in this post, dissertation introduction equals thesis introduction.

Start with why.

To craft a high-quality dissertation or thesis introduction chapter, you need to understand exactly what this chapter needs to achieve. In other words, what’s its purpose ? As the name suggests, the introduction chapter needs to introduce the reader to your research so that they understand what you’re trying to figure out, or what problem you’re trying to solve. More specifically, you need to answer four important questions in your introduction chapter.

These questions are:

• What will you be researching? (in other words, your research topic)
• Why is that worthwhile? (in other words, your justification)
• What will the scope of your research be? (in other words, what will you cover and what won’t you cover)
• What will the limitations of your research be? (in other words, what will the potential shortcomings of your research be?)

Simply put, your dissertation’s introduction chapter needs to provide an overview of your planned research , as well as a clear rationale for it. In other words, this chapter has to explain the “what” and the “why” of your research – what’s it all about and why’s that important.

Simple enough, right?

Well, the trick is finding the appropriate depth of information. As the researcher, you’ll be extremely close to your topic and this makes it easy to get caught up in the minor details. While these intricate details might be interesting, you need to write your introduction chapter on more of a “need-to-know” type basis, or it will end up way too lengthy and dense. You need to balance painting a clear picture with keeping things concise. Don’t worry though – you’ll be able to explore all the intricate details in later chapters.

Now that you understand what you need to achieve from your introduction chapter, we can get into the details. While the exact requirements for this chapter can vary from university to university, there are seven core components that most universities will require. We call these the seven essential ingredients . 

The 7 Essential Ingredients

• The opening section – where you’ll introduce the reader to your research in high-level terms
• The background to the study – where you’ll explain the context of your project
• The research problem – where you’ll explain the “gap” that exists in the current research
• The research aims , objectives and questions – where you’ll clearly state what your research will aim to achieve
• The significance (or justification) – where you’ll explain why your research is worth doing and the value it will provide to the world
• The limitations – where you’ll acknowledge the potential limitations of your project and approach
• The structure – where you’ll briefly outline the structure of your dissertation or thesis to help orient the reader

By incorporating these seven essential ingredients into your introduction chapter, you’ll comprehensively cover both the “ what ” and the “ why ” I mentioned earlier – in other words, you’ll achieve the purpose of the chapter.

Side note – you can also use these 7 ingredients in this order as the structure for your chapter to ensure a smooth, logical flow. This isn’t essential, but, generally speaking, it helps create an engaging narrative that’s easy for your reader to understand. If you’d like, you can also download our free introduction chapter template here.

Alright – let’s look at each of the ingredients now.

#1 – The Opening Section

The very first essential ingredient for your dissertation introduction is, well, an introduction or opening section. Just like every other chapter, your introduction chapter needs to start by providing a brief overview of what you’ll be covering in the chapter.

This section needs to engage the reader with clear, concise language that can be easily understood and digested. If the reader (your marker!) has to struggle through it, they’ll lose interest, which will make it harder for you to earn marks. Just because you’re writing an academic paper doesn’t mean you can ignore the basic principles of engaging writing used by marketers, bloggers, and journalists. At the end of the day, you’re all trying to sell an idea – yours is just a research idea.

So, what goes into this opening section?

Well, while there’s no set formula, it’s a good idea to include the following four foundational sentences in your opening section:

1 – A sentence or two introducing the overall field of your research.

For example:

“Organisational skills development involves identifying current or potential skills gaps within a business and developing programs to resolve these gaps. Management research, including X, Y and Z, has clearly established that organisational skills development is an essential contributor to business growth.”

2 – A sentence introducing your specific research problem.

“However, there are conflicting views and an overall lack of research regarding how best to manage skills development initiatives in highly dynamic environments where subject knowledge is rapidly and continuously evolving – for example, in the website development industry.”

3 – A sentence stating your research aims and objectives.

“This research aims to identify and evaluate skills development approaches and strategies for highly dynamic industries in which subject knowledge is continuously evolving.”.

4 – A sentence outlining the layout of the chapter.

“This chapter will provide an introduction to the study by first discussing the background and context, followed by the research problem, the research aims, objectives and questions, the significance and finally, the limitations.”

As I mentioned, this opening section of your introduction chapter shouldn’t be lengthy . Typically, these four sentences should fit neatly into one or two paragraphs, max. What you’re aiming for here is a clear, concise introduction to your research – not a detailed account.

PS – If some of this terminology sounds unfamiliar, don’t stress – I’ll explain each of the concepts later in this post.

#2 – Background to the study

Now that you’ve provided a high-level overview of your dissertation or thesis, it’s time to go a little deeper and lay a foundation for your research topic. This foundation is what the second ingredient is all about – the background to your study.

So, what is the background section all about?

Well, this section of your introduction chapter should provide a broad overview of the topic area that you’ll be researching, as well as the current contextual factors . This could include, for example, a brief history of the topic, recent developments in the area, key pieces of research in the area and so on. In other words, in this section, you need to provide the relevant background information to give the reader a decent foundational understanding of your research area.

Let’s look at an example to make this a little more concrete.

If we stick with the skills development topic I mentioned earlier, the background to the study section would start by providing an overview of the skills development area and outline the key existing research. Then, it would go on to discuss how the modern-day context has created a new challenge for traditional skills development strategies and approaches. Specifically, that in many industries, technical knowledge is constantly and rapidly evolving, and traditional education providers struggle to keep up with the pace of new technologies.

Importantly, you need to write this section with the assumption that the reader is not an expert in your topic area. So, if there are industry-specific jargon and complex terminology, you should briefly explain that here , so that the reader can understand the rest of your document.

Don’t make assumptions about the reader’s knowledge – in most cases, your markers will not be able to ask you questions if they don’t understand something. So, always err on the safe side and explain anything that’s not common knowledge.

#3 – The research problem

Now that you’ve given your reader an overview of your research area, it’s time to get specific about the research problem that you’ll address in your dissertation or thesis. While the background section would have alluded to a potential research problem (or even multiple research problems), the purpose of this section is to narrow the focus and highlight the specific research problem you’ll focus on.

But, what exactly is a research problem, you ask?

Well, a research problem can be any issue or question for which there isn’t already a well-established and agreed-upon answer in the existing research. In other words, a research problem exists when there’s a need to answer a question (or set of questions), but there’s a gap in the existing literature , or the existing research is conflicting and/or inconsistent.

So, to present your research problem, you need to make it clear what exactly is missing in the current literature and why this is a problem . It’s usually a good idea to structure this discussion into three sections – specifically:

• What’s already well-established in the literature (in other words, the current state of research)
• What’s missing in the literature (in other words, the literature gap)
• Why this is a problem (in other words, why it’s important to fill this gap)

Let’s look at an example of this structure using the skills development topic.

Organisational skills development is critically important for employee satisfaction and company performance (reference). Numerous studies have investigated strategies and approaches to manage skills development programs within organisations (reference).

(this paragraph explains what’s already well-established in the literature)

However, these studies have traditionally focused on relatively slow-paced industries where key skills and knowledge do not change particularly often. This body of theory presents a problem for industries that face a rapidly changing skills landscape – for example, the website development industry – where new platforms, languages and best practices emerge on an extremely frequent basis.

(this paragraph explains what’s missing from the literature)

As a result, the existing research is inadequate for industries in which essential knowledge and skills are constantly and rapidly evolving, as it assumes a slow pace of knowledge development. Industries in such environments, therefore, find themselves ill-equipped in terms of skills development strategies and approaches.

(this paragraph explains why the research gap is problematic)

As you can see in this example, in a few lines, we’ve explained (1) the current state of research, (2) the literature gap and (3) why that gap is problematic. By doing this, the research problem is made crystal clear, which lays the foundation for the next ingredient.

#4 – The research aims, objectives and questions

Now that you’ve clearly identified your research problem, it’s time to identify your research aims and objectives , as well as your research questions . In other words, it’s time to explain what you’re going to do about the research problem.

So, what do you need to do here?

Well, the starting point is to clearly state your research aim (or aims) . The research aim is the main goal or the overarching purpose of your dissertation or thesis. In other words, it’s a high-level statement of what you’re aiming to achieve.

Let’s look at an example, sticking with the skills development topic:

“Given the lack of research regarding organisational skills development in fast-moving industries, this study will aim to identify and evaluate the skills development approaches utilised by web development companies in the UK”.

As you can see in this example, the research aim is clearly outlined, as well as the specific context in which the research will be undertaken (in other words, web development companies in the UK).

Next up is the research objective (or objectives) . While the research aims cover the high-level “what”, the research objectives are a bit more practically oriented, looking at specific things you’ll be doing to achieve those research aims.

Let’s take a look at an example of some research objectives (ROs) to fit the research aim.

• RO1 – To identify common skills development strategies and approaches utilised by web development companies in the UK.
• RO2 – To evaluate the effectiveness of these strategies and approaches.
• RO3 – To compare and contrast these strategies and approaches in terms of their strengths and weaknesses.

As you can see from this example, these objectives describe the actions you’ll take and the specific things you’ll investigate in order to achieve your research aims. They break down the research aims into more specific, actionable objectives.

The final step is to state your research questions . Your research questions bring the aims and objectives another level “down to earth”. These are the specific questions that your dissertation or theses will seek to answer. They’re not fluffy, ambiguous or conceptual – they’re very specific and you’ll need to directly answer them in your conclusions chapter .

The research questions typically relate directly to the research objectives and sometimes can look a bit obvious, but they are still extremely important. Let’s take a look at an example of the research questions (RQs) that would flow from the research objectives I mentioned earlier.

• RQ1 – What skills development strategies and approaches are currently being used by web development companies in the UK?
• RQ2 – How effective are each of these strategies and approaches?
• RQ3 – What are the strengths and weaknesses of each of these strategies and approaches?

As you can see, the research questions mimic the research objectives , but they are presented in question format. These questions will act as the driving force throughout your dissertation or thesis – from the literature review to the methodology and onward – so they’re really important.

A final note about this section – it’s really important to be clear about the scope of your study (more technically, the delimitations ). In other words, what you WILL cover and what you WON’T cover. If your research aims, objectives and questions are too broad, you’ll risk losing focus or investigating a problem that is too big to solve within a single dissertation.

Simply put, you need to establish clear boundaries in your research. You can do this, for example, by limiting it to a specific industry, country or time period. That way, you’ll ringfence your research, which will allow you to investigate your topic deeply and thoroughly – which is what earns marks!

Need a helping hand?

#5 – Significance

Now that you’ve made it clear what you’ll be researching, it’s time to make a strong argument regarding your study’s importance and significance . In other words, now that you’ve covered the what, it’s time to cover the why – enter essential ingredient number 5 – significance.

Of course, by this stage, you’ve already briefly alluded to the importance of your study in your background and research problem sections, but you haven’t explicitly stated how your research findings will benefit the world . So, now’s your chance to clearly state how your study will benefit either industry , academia , or – ideally – both . In other words, you need to explain how your research will make a difference and what implications it will have .

Let’s take a look at an example.

“This study will contribute to the body of knowledge on skills development by incorporating skills development strategies and approaches for industries in which knowledge and skills are rapidly and constantly changing. This will help address the current shortage of research in this area and provide real-world value to organisations operating in such dynamic environments.”

As you can see in this example, the paragraph clearly explains how the research will help fill a gap in the literature and also provide practical real-world value to organisations.

This section doesn’t need to be particularly lengthy, but it does need to be convincing . You need to “sell” the value of your research here so that the reader understands why it’s worth committing an entire dissertation or thesis to it. This section needs to be the salesman of your research. So, spend some time thinking about the ways in which your research will make a unique contribution to the world and how the knowledge you create could benefit both academia and industry – and then “sell it” in this section.

#6 – The limitations

Now that you’ve “sold” your research to the reader and hopefully got them excited about what’s coming up in the rest of your dissertation, it’s time to briefly discuss the potential limitations of your research.

But you’re probably thinking, hold up – what limitations? My research is well thought out and carefully designed – why would there be limitations?

Well, no piece of research is perfect . This is especially true for a dissertation or thesis – which typically has a very low or zero budget, tight time constraints and limited researcher experience. Generally, your dissertation will be the first or second formal research project you’ve ever undertaken, so it’s unlikely to win any research awards…

Simply put, your research will invariably have limitations. Don’t stress yourself out though – this is completely acceptable (and expected). Even “professional” research has limitations – as I said, no piece of research is perfect. The key is to recognise the limitations upfront and be completely transparent about them, so that future researchers are aware of them and can improve the study’s design to minimise the limitations and strengthen the findings.

Generally, you’ll want to consider at least the following four common limitations. These are:

• Your scope – for example, perhaps your focus is very narrow and doesn’t consider how certain variables interact with each other.
• Your research methodology – for example, a qualitative methodology could be criticised for being overly subjective, or a quantitative methodology could be criticised for oversimplifying the situation (learn more about methodologies here ).
• Your resources – for example, a lack of time, money, equipment and your own research experience.
• The generalisability of your findings – for example, the findings from the study of a specific industry or country can’t necessarily be generalised to other industries or countries.

Don’t be shy here. There’s no use trying to hide the limitations or weaknesses of your research. In fact, the more critical you can be of your study, the better. The markers want to see that you are aware of the limitations as this demonstrates your understanding of research design – so be brutal.

#7 – The structural outline

Now that you’ve clearly communicated what your research is going to be about, why it’s important and what the limitations of your research will be, the final ingredient is the structural outline.The purpose of this section is simply to provide your reader with a roadmap of what to expect in terms of the structure of your dissertation or thesis.

In this section, you’ll need to provide a brief summary of each chapter’s purpose and contents (including the introduction chapter). A sentence or two explaining what you’ll do in each chapter is generally enough to orient the reader. You don’t want to get too detailed here – it’s purely an outline, not a summary of your research.

Let’s look at an example:

In Chapter One, the context of the study has been introduced. The research objectives and questions have been identified, and the value of such research argued. The limitations of the study have also been discussed.

In Chapter Two, the existing literature will be reviewed and a foundation of theory will be laid out to identify key skills development approaches and strategies within the context of fast-moving industries, especially technology-intensive industries.

In Chapter Three, the methodological choices will be explored. Specifically, the adoption of a qualitative, inductive research approach will be justified, and the broader research design will be discussed, including the limitations thereof.

So, as you can see from the example, this section is simply an outline of the chapter structure, allocating a short paragraph to each chapter. Done correctly, the outline will help your reader understand what to expect and reassure them that you’ll address the multiple facets of the study.

By the way – if you’re unsure of how to structure your dissertation or thesis, be sure to check out our video post which explains dissertation structure .

Keep calm and carry on.

Hopefully you feel a bit more prepared for this challenge of crafting your dissertation or thesis introduction chapter now. Take a deep breath and remember that Rome wasn’t built in a day – conquer one ingredient at a time and you’ll be firmly on the path to success.

Let’s quickly recap – the 7 ingredients are:

• The opening section – where you give a brief, high-level overview of what your research will be about.
• The study background – where you introduce the reader to key theory, concepts and terminology, as well as the context of your study.
• The research problem – where you explain what the problem with the current research is. In other words, the research gap.
• The research aims , objectives and questions – where you clearly state what your dissertation will investigate.
• The significance – where you explain what value your research will provide to the world.
• The limitations – where you explain what the potential shortcomings and limitations of your research may be.
• The structural outline – where you provide a high-level overview of the structure of your document

If you bake these ingredients into your dissertation introduction chapter, you’ll be well on your way to building an engaging introduction chapter that lays a rock-solid foundation for the rest of your document.

Remember, while we’ve covered the essential ingredients here, there may be some additional components that your university requires, so be sure to double-check your project brief!

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

42 Comments

Thanks very much for such an insight. I feel confident enough in undertaking my thesis on the survey;The future of facial recognition and learning non verbal interaction

Glad to hear that. Good luck with your thesis!

Thanks very much for such an insight. I feel confident now undertaking my thesis; The future of facial recognition and learning non verbal interaction.

Thanks so much for this article. I found myself struggling and wasting a lot of time in my thesis writing but after reading this article and watching some of your youtube videos, I now have a clear understanding of what is required for a thesis.

Thank you Derek, i find your each post so useful. Keep it up.

Thank you so much Derek ,for shedding the light and making it easier for me to handle the daunting task of academic writing .

Thanks do much Dereck for the comprehensive guide. It will assist me queit a lot in my thesis.

thanks a lot for helping

i LOVE the gifs, such a fun way to engage readers. thanks for the advice, much appreciated

Thanks a lot Derek! It will be really useful to the beginner in research!

You’re welcome

This is a well written, easily comprehensible, simple introduction to the basics of a Research Dissertation../the need to keep the reader in mind while writing the dissertation is an important point that is covered../ I appreciate the efforts of the author../

The instruction given are perfect and clear. I was supposed to take the course , unfortunately in Nepal the service is not avaialble.However, I am much more hopeful that you will provide require documents whatever you have produced so far.

Thank you very much

Thanks so much ❤️😘 I feel am ready to start writing my research methodology

This is genuinely the most effective advice I have ever been given regarding academia. Thank you so much!

This is one of the best write up I have seen in my road to PhD thesis. regards, this write up update my knowledge of research

I was looking for some good blogs related to Education hopefully your article will help. Thanks for sharing.

This is an awesome masterpiece. It is one of the most comprehensive guides to writing a Dissertation/Thesis I have seen and read.

You just saved me from going astray in writing a Dissertation for my undergraduate studies. I could not be more grateful for such a relevant guide like this. Thank you so much.

Thank you so much Derek, this has been extremely helpful!!

I do have one question though, in the limitations part do you refer to the scope as the focus of the research on a specific industry/country/chronological period? I assume that in order to talk about whether or not the research could be generalized, the above would need to be already presented and described in the introduction.

Thank you again!

Phew! You have genuinely rescued me. I was stuck how to go about my thesis. Now l have started. Thank you.

This is the very best guide in anything that has to do with thesis or dissertation writing. The numerous blends of examples and detailed insights make it worth a read and in fact, a treasure that is worthy to be bookmarked.

Thanks a lot for this masterpiece!

Powerful insight. I can now take a step

Thank you very much for these valuable introductions to thesis chapters. I saw all your videos about writing the introduction, discussion, and conclusion chapter. Then, I am wondering if we need to explain our research limitations in all three chapters, introduction, discussion, and conclusion? Isn’t it a bit redundant? If not, could you please explain how can we write in different ways? Thank you.

Excellent!!! Thank you…

Thanks for this informative content. I have a question. The research gap is mentioned in both the introduction and literature section. I would like to know how can I demonstrate the research gap in both sections without repeating the contents?

I’m incredibly grateful for this invaluable content. I’ve been dreading compiling my postgrad thesis but breaking each chapter down into sections has made it so much easier for me to engage with the material without feeling overwhelmed. After relying on your guidance, I’m really happy with how I’ve laid out my introduction.

Thank you for the informative content you provided

Hi Derrick and Team, thank you so much for the comprehensive guide on how to write a dissertation or a thesis introduction section. For some of us first-timers, it is a daunting task. However, the instruction with relevant examples makes it clear and easy to follow through. Much appreciated.

It was so helpful. God Bless you. Thanks very much

I thank you Grad coach for your priceless help. I have two questions I have learned from your video the limitations of the research presented in chapter one. but in another video also presented in chapter five. which chapter limitation should be included? If possible, I need your answer since I am doing my thesis. how can I explain If I am asked what is my motivation for this research?

Thank you guys for the great work you are doing. Honestly, you have made the research to be interesting and simplified. Even a novice will easily grasp the ideas you put forward, Thank you once again.

Excellent piece!

I feel like just settling for a good topic is usually the hardest part.

Thank you so much. My confidence has been completely destroyed during my first year of PhD and you have helped me pull myself together again

Happy to help 🙂

I am so glad I ran into your resources and did not waste time doing the wrong this. Research is now making so much sense now.

Gratitude to Derrick and the team I was looking for a solid article that would aid me in drafting the thesis’ introduction. I felt quite happy when I came across the piece you wrote because it was so well-written and insightful. I wish you success in the future.

thank you so much. God Bless you

Thank you so much Grad Coach for these helpful insights. Now I can get started, with a great deal of confidence.

It’s ‘alluded to’ not ‘eluded to’.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly