abstract section dissertation

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Prevent plagiarism, run a free check.

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 14 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

How to Write an Abstract APA Format

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

An APA abstract is a brief, comprehensive summary of the contents of an article, research paper, dissertation, or report.

It is written in accordance with the guidelines of the American Psychological Association (APA), which is a widely used format in social and behavioral sciences. 

An APA abstract summarizes, usually in one paragraph of between 150–250 words, the major aspects of a research paper or dissertation in a prescribed sequence that includes:

• The rationale: the overall purpose of the study, providing a clear context for the research undertaken.
• Information regarding the method and participants: including materials/instruments, design, procedure, and data analysis.
• Main findings or trends: effectively highlighting the key outcomes of the hypotheses.
• Interpretations and conclusion(s): solidify the implications of the research.
• Keywords related to the study: assist the paper’s discoverability in academic databases.

The abstract should stand alone, be “self-contained,” and make sense to the reader in isolation from the main article.

The purpose of the abstract is to give the reader a quick overview of the essential information before reading the entire article. The abstract is placed on its own page, directly after the title page and before the main body of the paper.

Although the abstract will appear as the very first part of your paper, it’s good practice to write your abstract after you’ve drafted your full paper, so that you know what you’re summarizing.

Note : This page reflects the latest version of the APA Publication Manual (i.e., APA 7), released in October 2019.

Structure of the Abstract

[NOTE: DO NOT separate the components of the abstract – it should be written as a single paragraph. This section is separated to illustrate the abstract’s structure.]

1) The Rationale

One or two sentences describing the overall purpose of the study and the research problem(s) you investigated. You are basically justifying why this study was conducted.

• What is the importance of the research?
• Why would a reader be interested in the larger work?
• For example, are you filling a gap in previous research or applying new methods to take a fresh look at existing ideas or data?
• Women who are diagnosed with breast cancer can experience an array of psychosocial difficulties; however, social support, particularly from a spouse, has been shown to have a protective function during this time. This study examined the ways in which a woman’s daily mood, pain, and fatigue, and her spouse’s marital satisfaction predict the woman’s report of partner support in the context of breast cancer.
• The current nursing shortage, high hospital nurse job dissatisfaction, and reports of uneven quality of hospital care are not uniquely American phenomena.
• Students with special educational needs and disabilities (SEND) are more likely to exhibit behavioral difficulties than their typically developing peers. The aim of this study was to identify specific risk factors that influence variability in behavior difficulties among individuals with SEND.

2) The Method

Information regarding the participants (number, and population). One or two sentences outlining the method, explaining what was done and how. The method is described in the present tense.

• Pretest data from a larger intervention study and multilevel modeling were used to examine the effects of women’s daily mood, pain, and fatigue and average levels of mood, pain, and fatigue on women’s report of social support received from her partner, as well as how the effects of mood interacted with partners’ marital satisfaction.
• This paper presents reports from 43,000 nurses from more than 700 hospitals in the United States, Canada, England, Scotland, and Germany in 1998–1999.
• The study sample comprised 4,228 students with SEND, aged 5–15, drawn from 305 primary and secondary schools across England. Explanatory variables were measured at the individual and school levels at baseline, along with a teacher-reported measure of behavior difficulties (assessed at baseline and the 18-month follow-up).

3) The Results

One or two sentences indicating the main findings or trends found as a result of your analysis. The results are described in the present or past tense.

• Results show that on days in which women reported higher levels of negative or positive mood, as well as on days they reported more pain and fatigue, they reported receiving more support. Women who, on average, reported higher levels of positive mood tended to report receiving more support than those who, on average, reported lower positive mood. However, average levels of negative mood were not associated with support. Higher average levels of fatigue but not pain were associated with higher support. Finally, women whose husbands reported higher levels of marital satisfaction reported receiving more partner support, but husbands’ marital satisfaction did not moderate the effect of women’s mood on support.
• Nurses in countries with distinctly different healthcare systems report similar shortcomings in their work environments and the quality of hospital care. While the competence of and relation between nurses and physicians appear satisfactory, core problems in work design and workforce management threaten the provision of care.
• Hierarchical linear modeling of data revealed that differences between schools accounted for between 13% (secondary) and 15.4% (primary) of the total variance in the development of students’ behavior difficulties, with the remainder attributable to individual differences. Statistically significant risk markers for these problems across both phases of education were being male, eligibility for free school meals, being identified as a bully, and lower academic achievement. Additional risk markers specific to each phase of education at the individual and school levels are also acknowledged.

4) The Conclusion / Implications

A brief summary of your conclusions and implications of the results, described in the present tense. Explain the results and why the study is important to the reader.

• For example, what changes should be implemented as a result of the findings of the work?
• How does this work add to the body of knowledge on the topic?

Implications of these findings are discussed relative to assisting couples during this difficult time in their lives.

• Resolving these issues, which are amenable to managerial intervention, is essential to preserving patient safety and care of consistently high quality.
• Behavior difficulties are affected by risks across multiple ecological levels. Addressing any one of these potential influences is therefore likely to contribute to the reduction in the problems displayed.

The above examples of abstracts are from the following papers:

Aiken, L. H., Clarke, S. P., Sloane, D. M., Sochalski, J. A., Busse, R., Clarke, H., … & Shamian, J. (2001). Nurses’ reports on hospital care in five countries . Health affairs, 20(3) , 43-53.

Boeding, S. E., Pukay-Martin, N. D., Baucom, D. H., Porter, L. S., Kirby, J. S., Gremore, T. M., & Keefe, F. J. (2014). Couples and breast cancer: Women’s mood and partners’ marital satisfaction predicting support perception . Journal of Family Psychology, 28(5) , 675.

Oldfield, J., Humphrey, N., & Hebron, J. (2017). Risk factors in the development of behavior difficulties among students with special educational needs and disabilities: A multilevel analysis . British journal of educational psychology, 87(2) , 146-169.

5) Keywords

APA style suggests including a list of keywords at the end of the abstract. This is particularly common in academic articles and helps other researchers find your work in databases.

Keywords in an abstract should be selected to help other researchers find your work when searching an online database. These keywords should effectively represent the main topics of your study. Here are some tips for choosing keywords:

Core Concepts: Identify the most important ideas or concepts in your paper. These often include your main research topic, the methods you’ve used, or the theories you’re discussing.

Specificity: Your keywords should be specific to your research. For example, suppose your paper is about the effects of climate change on bird migration patterns in a specific region. In that case, your keywords might include “climate change,” “bird migration,” and the region’s name.

Consistency with Paper: Make sure your keywords are consistent with the terms you’ve used in your paper. For example, if you use the term “adolescent” rather than “teen” in your paper, choose “adolescent” as your keyword, not “teen.”

Jargon and Acronyms: Avoid using too much-specialized jargon or acronyms in your keywords, as these might not be understood or used by all researchers in your field.

Synonyms: Consider including synonyms of your keywords to capture as many relevant searches as possible. For example, if your paper discusses “post-traumatic stress disorder,” you might include “PTSD” as a keyword.

Remember, keywords are a tool for others to find your work, so think about what terms other researchers might use when searching for papers on your topic.

The Abstract SHOULD NOT contain:

Lengthy background or contextual information: The abstract should focus on your research and findings, not general topic background.

Undefined jargon, abbreviations,  or acronyms: The abstract should be accessible to a wide audience, so avoid highly specialized terms without defining them.

Citations: Abstracts typically do not include citations, as they summarize original research.

Incomplete sentences or bulleted lists: The abstract should be a single, coherent paragraph written in complete sentences.

New information not covered in the paper: The abstract should only summarize the paper’s content.

Subjective comments or value judgments: Stick to objective descriptions of your research.

Excessive details on methods or procedures: Keep descriptions of methods brief and focused on main steps.

Speculative or inconclusive statements: The abstract should state the research’s clear findings, not hypotheses or possible interpretations.

• Any illustration, figure, table, or references to them . All visual aids, data, or extensive details should be included in the main body of your paper, not in the abstract. 
• Elliptical or incomplete sentences should be avoided in an abstract . The use of ellipses (…), which could indicate incomplete thoughts or omitted text, is not appropriate in an abstract.

APA Style for Abstracts

An APA abstract must be formatted as follows:

Include the running head aligned to the left at the top of the page (professional papers only) and page number. Note, student papers do not require a running head. On the first line, center the heading “Abstract” and bold (do not underlined or italicize). Do not indent the single abstract paragraph (which begins one line below the section title). Double-space the text. Use Times New Roman font in 12 pt. Set one-inch (or 2.54 cm) margins. If you include a “keywords” section at the end of the abstract, indent the first line and italicize the word “Keywords” while leaving the keywords themselves without any formatting.

Example APA Abstract Page

Download this example as a PDF

Further Information

• APA 7th Edition Abstract and Keywords Guide
• Example APA Abstract
• How to Write a Good Abstract for a Scientific Paper or Conference Presentation
• How to Write a Lab Report
• Writing an APA paper

How long should an APA abstract be?

An APA abstract should typically be between 150 to 250 words long. However, the exact length may vary depending on specific publication or assignment guidelines. It is crucial that it succinctly summarizes the essential elements of the work, including purpose, methods, findings, and conclusions.

Where does the abstract go in an APA paper?

In an APA formatted paper, the abstract is placed on its own page, directly after the title page and before the main body of the paper. It’s typically the second page of the document. It starts with the word “Abstract” (centered and not in bold) at the top of the page, followed by the text of the abstract itself.

What are the 4 C’s of abstract writing?

The 4 C’s of abstract writing are an approach to help you create a well-structured and informative abstract. They are:

Conciseness: An abstract should briefly summarize the key points of your study. Stick to the word limit (typically between 150-250 words for an APA abstract) and avoid unnecessary details.

Clarity: Your abstract should be easy to understand. Avoid jargon and complex sentences. Clearly explain the purpose, methods, results, and conclusions of your study.

Completeness: Even though it’s brief, the abstract should provide a complete overview of your study, including the purpose, methods, key findings, and your interpretation of the results.

Cohesion: The abstract should flow logically from one point to the next, maintaining a coherent narrative about your study. It’s not just a list of disjointed elements; it’s a brief story of your research from start to finish.

What is the abstract of a psychology paper?

An abstract in a psychology paper serves as a snapshot of the paper, allowing readers to quickly understand the purpose, methodology, results, and implications of the research without reading the entire paper. It is generally between 150-250 words long.

Related Articles

Student Resources

How To Cite A YouTube Video In APA Style – With Examples

APA References Page Formatting and Example

APA Title Page (Cover Page) Format, Example, & Templates

How do I Cite a Source with Multiple Authors in APA Style?

How to Write a Psychology Essay

Lab Report Format: Step-by-Step Guide & Examples

How to Write an Abstract for a Dissertation

At roughly 200 words, the abstract is the shortest part of the dissertation! Thankfully, it’s also one of the simplest to write – as long as you approach it sensibly…

The cardinal rule for writing an abstract is to leave it ‘til last. After all, the abstract is a summary of the entire dissertation, so it makes sense to leave it until the end.

Having said that, it’s a good idea to prepare yourself. If you learn how to write an abstract well ahead of time, there’ll be no last-minute panics. With that in mind, let’s run through the basics of writing a dissertation abstract.

What is the purpose of an abstract?

As mentioned, the abstract is essentially a summary of your dissertation. Think of it like a film synopsis or a book blurb. In roughly 200 words, it should tell the reader exactly what to expect from reading your dissertation.

A good abstract will also hint at the relevance and usefulness of the project. Indeed, in many ways, the abstract is an opportunity for you to ‘sell’ your project to the reader. The more compelling the abstract is, the more likely they are to read your dissertation.

What should an abstract include?

Later on, we’ll show you exactly how to structure an abstract. But first, it’s important to understand the elements of an abstract. In brief, an abstract should:

• Intrigue – In the first few sentences, you should introduce your topic to the reader, and highlight a key debate or issue that inspired the dissertation. If you can intrigue your reader in the opening sentence, they’re much more likely to continue reading!
• Convince – You’ll then need to convince your reader that your dissertation is necessary and worthwhile. Often, this is achieved by explaining how your dissertation extends or challenges the existing literature.
• Describe – You should describe the research methods very briefly but accurately.
• Inform – The abstract should be informative, particularly in relation to the findings of the study. It is not necessary to state all the findings, but you should highlight the key insights.
• Demonstrate relevance and usefulness – As mentioned, a good abstract finishes by saying who will find this research useful and why. Occasionally, it may also suggest directions for future research.

Remember, since the abstract is a summary of a project you’ve completed, it should be written in the present or past simple tense .

How should you structure an abstract?

The structure of an abstract can vary depending on the subject you are studying at university. Also, some universities have specific guidelines for writing an abstract, so always check with your tutor first. In particular, APA style has quite specific rules for formatting an abstract.

Though, generally speaking, the following structure is a good starting point for students in most subject areas:

1. Provide some background

The first 1-2 sentences should provide a very brief background to your topic of study. Remember, the aim is to intrigue here. These sentences are usually written in the present tense.

2. Refer to existing debates

Next, you should briefly explain the existing theory/research that has informed your chosen topic. If there are any key debates relevant to your topic, briefly mention them here. Try to limit this to 1-2 sentences and stick with the present or past tense.

3. Explain why the dissertation was worthwhile

In the next sentence or two, you’ll need to convince your reader that this study was worthwhile. Try to use the previous few sentences as a springboard, but explain why your study was unique.

4. State your research question

If it was not stated in the last section, the next sentence should clearly state your research question. You may have had more than one research question/research aim, but try to be as succinct as possible here.

5. State the methodology

In this sentence, you should clearly describe the methodology used . There is no need to explain why this method was chosen; just be as precise and succinct as possible.

6. State the key findings

The next sentence should explain the findings of your dissertation. Try not to be too technical here as your reader may be a novice. Also, there probably won’t be space to state all your findings, so present the ones that are most relevant and interesting. In fact, leaving a bit to the imagination is a good thing because it should intrigue the reader…

7. State who will find this research useful and why

In the last sentence, you should explain the usefulness and relevance of your dissertation. Consider: Who will benefit from this research? Does it have any practical applications?

8. List of keywords

Depending on your subject, you may be expected to provide a short list of keywords. This is common in Psychology research, for example. Check with your tutor if keywords are necessary. Remember, these should be listed in alphabetical order underneath the body of the abstract.

What’s the secret to writing a great abstract?

So, we’ve covered the basics of writing an abstract, but how can you write a first-class dissertation abstract? Well, we have two pieces of advice.

Firstly, be precise and succinct. Once you’ve written your abstract, you should set it aside for at least 24 hours, and then return to it with fresh eyes. As you read through it, cut out anything that’s not absolutely essential. Also, consider rewording sentences so that they are clear and readable. You can use our disseration writing services to help you with this.

Secondly, when you reveal your findings, try to find the right balance between revealing too much and revealing too little. It’s important to demonstrate that your study was interesting and relevant, but if you reveal too much, the reader may not want to bother reading your dissertation.

Indeed, writing a good dissertation is all about taking your reader on a journey and building momentum as you go. If you can manage this, you’ll keep your reader’s attention until the very last page! Creating this balance is not easy but it is a skill that can be developed through practice.

Common mistakes to avoid

So, we’ve reviewed the components of a good dissertation abstract. But what constitutes a bad abstract? Let’s finish by exploring some of the common mistakes students make when writing an abstract:

• Too long – Generally speaking, an abstract should be between 150 and 250 words, and it should fit on one page. If you make it too long, it won’t be compelling, and it’ll probably just confuse the reader.
• Lack of relevant keywords in the body of the abstract – Although an abstract should be written in reasonably non-technical language, it should include some relevant keywords. E.g. In the above example “Green marketing” and “Green purchasing behaviour” were pertinent keywords. Using appropriate keywords shows you’ve done wider reading and you understand where your project ‘fits in’ to the literature. Also, if your research were to be published, keywords would help other researchers to find it.
• Written in the wrong tense – A common mistake students make is that they write their abstract in the future tense (I.e. “This dissertation will explore the relationship between…”). The research has already been conducted, so it should be written in the past tense.
• Wrong positioning – The abstract should go after the title page and before the contents page.
• References and quotes – Generally speaking, an abstract should not contain references or quotations from other theorists. The only exception might be if your dissertation was solely focused on one particular theory/debate. In that case, keep quotes and references to an absolute minimum – your introduction and literature review will provide a comprehensive description of the theory!

You may also like

• Features for Creative Writers
• Features for Work
• Features for Higher Education
• Features for Teachers
• Features for Non-Native Speakers
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Get started with ProWritingAid

Drop us a line or let's stay in touch via :

• Cookies & Privacy
• GETTING STARTED
• Introduction
• FUNDAMENTALS
• Acknowledgements
• Research questions & hypotheses
• Concepts, constructs & variables
• Research limitations
• Getting started
• Sampling Strategy
• Research Quality
• Research Ethics
• Data Analysis

How to structure your dissertation abstract

Abstracts written for undergraduate and master's level dissertations have a number of structural components [ NOTE ]. Even though every dissertation is different, these structural components are likely to be relevant for most dissertations. When writing the dissertation abstract, the most important thing to remember is why your research was significant. This should have been clearly explained in the introductory chapter of your dissertation ( Chapter One: Introduction ). Understanding the significance of your research is important because how much you write for each component of the abstract (in terms of word count or number of sentences) will depend on the relative importance of each of these components to your research.

There are four major structural components, which aim to let the reader know about the background to and significance of your study, the research strategy being followed, the findings of the research, and the conclusions that were made. You should write one or a number of sentences for each of these components, with each making up a part of the 150 to 350 words that are typically written in dissertation abstracts. This section sets out and explains these structural components. These four major components are:

• COMPONENT #1: Study background and significance
• COMPONENT #2: Components of your research strategy
• COMPONENT #3: Findings
• COMPONENT #4: Conclusions

COMPONENT #1 Study background and significance

The first few sentences of the dissertation abstract highlight the background to your research, as well as the significance of the study. Hopefully, by the time you come to write the abstract, you will already know why your study is significant.

In explaining the significance of your study, you will also need to provide some context for your research. This includes the problem that you are addressing and your motivation for conducting the study. In building the background to the study, this part of the abstract should address questions such as:

What is the purpose of the research?

Why did you carry out the research?

How is the study significant? Why should anyone care or why do they care (is the study interesting)?

Remember, all of this needs to be encompassed within just a few sentences. Therefore, only outline those aspects of your study that you feel are the most important; those aspects that you think will catch the reader's attention.

COMPONENT #2 Components of your research strategy

The relative importance of the methodological components discussed in the dissertation abstract will depend on whether any of these components made the study significant in some way. Ask yourself the question: Did any of the following components of research strategy help make my study significant?

The broad research design (e.g., qualitative, quantitative, mixed, etc.)

The type of research design (e.g., experimental research, case study approach, grounded theory, ethnography, etc.)

The research methods (e.g., survey, interviews, focus groups, observation, etc.)

The analytical techniques used (e.g., content analysis, statistical analyses, etc.)

If the answer is YES , greater focus (and word count) should probably be dedicated to explaining these components of research strategy in the dissertation abstract. If not, try and summarise the components used more succinctly (i.e., in fewer words). Since the way that you would write the research strategy part of your dissertation abstract will vary depending on the relative significance of these components to your study, we have produced examples to help.

In explaining the approach to research strategy that you adopted in this part of your dissertation abstract, addressing some of the following questions may help:

What research design guided your study?

What was the scope of your study?

What research methods did you use?

What were the main ideas, constructs and/or variables that you examined, measured, controlled and/or ignored?

What was your unit of analysis?

What was your sample (and population)?

What analysis techniques did you use to arrive at your findings?

Often, you will be able to combine the answer to a number of these questions in a single sentence, which will help make the abstract more concise and succinct.

COMPONENT #3 Major findings

Following a discussion of the components of your research strategy, the dissertation abstract should move on to present the main findings from your research. We use the word findings and not results to emphasise the fact that the abstract is not the section where you should include lots of data; and it should definitely not include any analysis. Leave this to the Results/Findings chapter of your dissertation (often Chapter Four: Results/Findings ). Remember that the findings part of the dissertation abstract should focus on answering your research questions and/or hypotheses.

It may help to answer some of the following questions in order to write this part of the dissertation abstract:

Did the findings answer your research questions and/or hypotheses?

What did the findings show in terms of these research questions and/or hypotheses?

What are the most important findings?

What is the significance of your findings?

To what extent are your findings trustworthy (i.e., reliable, generalisable, consistent, dependable, etc.)?

You should avoid making comments that are vague or over-exaggerate your findings. You should also ensure that you explain the findings in a way that non-experts could understand without having to read additional parts of your dissertation.

COMPONENT #4 Conclusions

The final part of your dissertation abstract should focus on the conclusions from your research and the resultant implications. Bearing in mind the findings that have just been discussed, you need to address questions such as:

What has been learned?

What are the implications of the findings?

Is there potential for generalisation of your findings?

What are the limitations of your research?

When writing the conclusion part of your abstract, remember that these conclusions should be precise and concise. There is no need to re-summarise what you have already discussed or the contents of your dissertation. This is an informative abstract, not a descriptive one. If you are unsure of the difference, you may find the section, Choosing between dissertation abstract styles: Descriptive and informative , helpful. Furthermore, be careful not to make claims that cannot be supported by your findings. There is always a danger to over-exaggerate and/or over-generalise in this part of the abstract, which should be avoided. It is unlikely that you will have changed the world through your study, but you may still have added something significant to the literature, so try and strike the right balance.

NOTE: This article is based on the use of the informative abstract style, not the descriptive style; the former being the typical style adopted in undergraduate and master's dissertations and theses. For a comparison of the two styles - descriptive and informative - see the article, Choosing between dissertation abstract styles: Descriptive or informative .

In the next section, Useful phrases when writing a dissertation abstract , we set out some phrases that you may find useful when writing up your dissertation abstract.

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 412 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 3. The Abstract
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

An abstract summarizes, usually in one paragraph of 300 words or less, the major aspects of the entire paper in a prescribed sequence that includes: 1) the overall purpose of the study and the research problem(s) you investigated; 2) the basic design of the study; 3) major findings or trends found as a result of your analysis; and, 4) a brief summary of your interpretations and conclusions.

Writing an Abstract. The Writing Center. Clarion University, 2009; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century . Oxford, UK: Chandos Publishing, 2010;

Importance of a Good Abstract

Sometimes your professor will ask you to include an abstract, or general summary of your work, with your research paper. The abstract allows you to elaborate upon each major aspect of the paper and helps readers decide whether they want to read the rest of the paper. Therefore, enough key information [e.g., summary results, observations, trends, etc.] must be included to make the abstract useful to someone who may want to examine your work.

How do you know when you have enough information in your abstract? A simple rule-of-thumb is to imagine that you are another researcher doing a similar study. Then ask yourself: if your abstract was the only part of the paper you could access, would you be happy with the amount of information presented there? Does it tell the whole story about your study? If the answer is "no" then the abstract likely needs to be revised.

Farkas, David K. “A Scheme for Understanding and Writing Summaries.” Technical Communication 67 (August 2020): 45-60;  How to Write a Research Abstract. Office of Undergraduate Research. University of Kentucky; Staiger, David L. “What Today’s Students Need to Know about Writing Abstracts.” International Journal of Business Communication January 3 (1966): 29-33; Swales, John M. and Christine B. Feak. Abstracts and the Writing of Abstracts . Ann Arbor, MI: University of Michigan Press, 2009.

Structure and Writing Style

I.  Types of Abstracts

To begin, you need to determine which type of abstract you should include with your paper. There are four general types.

Critical Abstract A critical abstract provides, in addition to describing main findings and information, a judgment or comment about the study’s validity, reliability, or completeness. The researcher evaluates the paper and often compares it with other works on the same subject. Critical abstracts are generally 400-500 words in length due to the additional interpretive commentary. These types of abstracts are used infrequently.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarized. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less. Informative Abstract The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Highlight Abstract A highlight abstract is specifically written to attract the reader’s attention to the study. No pretense is made of there being either a balanced or complete picture of the paper and, in fact, incomplete and leading remarks may be used to spark the reader’s interest. In that a highlight abstract cannot stand independent of its associated article, it is not a true abstract and, therefore, rarely used in academic writing.

II.  Writing Style

Use the active voice when possible , but note that much of your abstract may require passive sentence constructions. Regardless, write your abstract using concise, but complete, sentences. Get to the point quickly and always use the past tense because you are reporting on a study that has been completed.

Abstracts should be formatted as a single paragraph in a block format and with no paragraph indentations. In most cases, the abstract page immediately follows the title page. Do not number the page. Rules set forth in writing manual vary but, in general, you should center the word "Abstract" at the top of the page with double spacing between the heading and the abstract. The final sentences of an abstract concisely summarize your study’s conclusions, implications, or applications to practice and, if appropriate, can be followed by a statement about the need for additional research revealed from the findings.

Composing Your Abstract

Although it is the first section of your paper, the abstract should be written last since it will summarize the contents of your entire paper. A good strategy to begin composing your abstract is to take whole sentences or key phrases from each section of the paper and put them in a sequence that summarizes the contents. Then revise or add connecting phrases or words to make the narrative flow clearly and smoothly. Note that statistical findings should be reported parenthetically [i.e., written in parentheses].

Before handing in your final paper, check to make sure that the information in the abstract completely agrees with what you have written in the paper. Think of the abstract as a sequential set of complete sentences describing the most crucial information using the fewest necessary words. The abstract SHOULD NOT contain:

• A catchy introductory phrase, provocative quote, or other device to grab the reader's attention,
• Lengthy background or contextual information,
• Redundant phrases, unnecessary adverbs and adjectives, and repetitive information;
• Acronyms or abbreviations,
• References to other literature [say something like, "current research shows that..." or "studies have indicated..."],
• Using ellipticals [i.e., ending with "..."] or incomplete sentences,
• Jargon or terms that may be confusing to the reader,
• Citations to other works, and
• Any sort of image, illustration, figure, or table, or references to them.

Abstract. Writing Center. University of Kansas; Abstract. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Abstracts. The Writing Center. University of North Carolina; Borko, Harold and Seymour Chatman. "Criteria for Acceptable Abstracts: A Survey of Abstracters' Instructions." American Documentation 14 (April 1963): 149-160; Abstracts. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Hartley, James and Lucy Betts. "Common Weaknesses in Traditional Abstracts in the Social Sciences." Journal of the American Society for Information Science and Technology 60 (October 2009): 2010-2018; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century. Oxford, UK: Chandos Publishing, 2010; Procter, Margaret. The Abstract. University College Writing Centre. University of Toronto; Riordan, Laura. “Mastering the Art of Abstracts.” The Journal of the American Osteopathic Association 115 (January 2015 ): 41-47; Writing Report Abstracts. The Writing Lab and The OWL. Purdue University; Writing Abstracts. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-First Century . Oxford, UK: 2010; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison.

Writing Tip

Never Cite Just the Abstract!

Citing to just a journal article's abstract does not confirm for the reader that you have conducted a thorough or reliable review of the literature. If the full-text is not available, go to the USC Libraries main page and enter the title of the article [NOT the title of the journal]. If the Libraries have a subscription to the journal, the article should appear with a link to the full-text or to the journal publisher page where you can get the article. If the article does not appear, try searching Google Scholar using the link on the USC Libraries main page. If you still can't find the article after doing this, contact a librarian or you can request it from our free i nterlibrary loan and document delivery service .

• << Previous: Research Process Video Series
• Next: Executive Summary >>
• Last Updated: May 15, 2024 9:53 AM
• URL: https://libguides.usc.edu/writingguide

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings . In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

How to Write a Dissertation Abstract | 12 Great Abstract Examples

Writing a dissertation is a monumental task that require dedication, perseverance, and meticulous attention to detail. As you navigate the world of academic research, one of the most crucial aspects of your dissertation will be learning how to write an abstract that quickly and easily communicates the essence of your study to readers.

In this article, we will explore the art of writing a dissertation abstract, a concise summary that encapsulates the essence and significance of your research.

What is an Abstract?

An abstract is a concise summary of a larger academic work, typically a research paper, thesis, or dissertation. It serves as a standalone representation of the main objectives, methods, results, and conclusions of the study, allowing readers to quickly understand what your dissertation is about without having to read the entire document.

Think of the abstract as a condensed version of your entire dissertation, distilled into a few paragraphs. It provides a snapshot of your research, highlighting the key points and findings in a clear way. While the abstract is usually located at the beginning of the document, it is often one of the last sections to be written, as it requires a thorough understanding of the entire study.

The primary purpose of an abstract is to inform and attract readers, providing them with enough information to determine whether the research is relevant to their interests and needs. In addition to summarizing the content of the research, the abstract also conveys the significance and potential impact of the study within its respective field or discipline. It should highlight the originality, relevance, and contribution of the research to existing knowledge, as well as its implications for future research, practice, or policy.

Overall, an abstract plays a crucial role in communicating the essence of your research to a wider audience. By writing a clear, concise, and compelling abstract, you can effectively engage readers, showcase the importance of your research, and increase the visibility and impact of your work within the academic community.

Read next: The Best Dissertation Proofreading Services

What Should a Dissertation Abstract Include?

You should ensure that your dissertation abstract contains the following sections:

• Title: The title of your dissertation should be prominently displayed at the beginning of the abstract. The title should accurately reflect the focus and scope of your research, providing readers with a clear understanding of the topic you have investigated.
• Objective: In this section, clearly state the main objective or research question addressed in your dissertation. This helps readers understand the specific purpose of your study and what you aimed to achieve through your research. Be concise yet informative in articulating the primary goal or purpose of your investigation.
• Methodology: Briefly describe the research methods and approach used to investigate the research question. Provide an overview of the research design, data collection methods, sampling techniques, and any other relevant procedures employed in your study. The methodology section should give readers insight into the empirical or theoretical framework guiding your research.
• Results: Summarize the key findings or outcomes of your study. Highlight the most significant results, trends, patterns, or conclusions that emerged from your analysis. Provide enough detail to convey the main findings of your research while remaining concise and focused. Avoid including extraneous details or raw data that are better suited for the main body of the dissertation.
• Conclusion: Provide a brief conclusion that synthesizes the significance of your research and its implications for the field. Reflect on how your findings contribute to existing knowledge, address gaps in the literature, or advance theoretical understanding within your discipline. Discuss the broader implications of your research and potential avenues for future research or application. End with a strong closing statement that emphasizes the importance of your work and leaves a lasting impression on the reader.

If you have invested enough legwork in choosing a good dissertation topic , justifying your research in this way should be relatively straightforward.

Why is The Abstract Section so Important?

Essentially, when people read your abstract, they will be asking themselves: Is this something I want to read? As such, the abstract serves the following important purposes:

• First Impression: The abstract serves as the initial point of contact between the reader and your dissertation. It is the first thing readers encounter when accessing your work, whether through academic databases, search engines, or publication indexes. As such, the abstract plays a crucial role in shaping readers’ perceptions of your research and influencing their decision to engage further with the full text.
• Accessibility and Discoverability: In today’s information-rich environment, researchers often rely on abstracts to quickly identify relevant literature and determine its suitability for their needs. By providing a concise summary of your research, the abstract enhances the accessibility and discoverability of your work, making it easier for scholars, practitioners, and other stakeholders to locate and access your dissertation amidst the vast sea of academic literature.
• Time-Efficient Communication: The abstract offers a time-efficient means of communication, allowing readers to glean essential insights from your research in a matter of minutes. In an era where time is a precious commodity, busy scholars and professionals often rely on abstracts to efficiently survey the landscape of research and identify studies of interest without having to invest extensive time and effort in reading the full text.
• Decision-Making Tool: For many readers, particularly journal editors, peer reviewers, and conference organizers, the abstract serves as a decision-making tool for evaluating the relevance, quality, and significance of your research. A well-crafted abstract can pique readers’ interest, demonstrate the novelty and importance of your findings, and persuade them to explore your dissertation further or consider it for publication or presentation.
• Representation of Your Work: The abstract serves as a condensed representation of your entire dissertation, encapsulating its core objectives, methods, results, and conclusions in a concise and coherent manner. As such, it plays a crucial role in shaping the overall narrative of your research and conveying its essence to a wider audience, including those who may not have the time or inclination to read the full text.
• Professional Recognition and Impact: A well-written abstract can enhance the visibility, impact, and recognition of your research within the academic community. It serves as a showcase of your scholarly abilities, showcasing your ability to articulate complex ideas, communicate effectively, and make a meaningful contribution to your field. A compelling abstract can attract attention, generate citations, and ultimately contribute to the dissemination and advancement of knowledge within your discipline.

When you have written your abstract, don’t forget to get is checked by a professional dissertation proofreader .

12 Examples of Dissertation Abstracts for a Range of Subjects

Leave a comment.

Adreanna Nattiel PhD Dissertation Defense: Carnal Knowledge: Black Women, Moral Panics & Sex Education Policy

Join us on Sunday, May 19 at 4:00 pm for Adreanna Nattiel's Dissertation Defense  Carnal Knowledge: Black Women, Moral Panics, and Sex Education Policy.  This event is virtual. To receive the link, please register using the "Get Tickets" link on the right hand side.

In Carnal Knowledge: Black Women, Moral Panics & Sex Education Policy , Adreanna Nattiel unveils the utilization of sex education as a political instrument to discipline and pathologize Black women while also highlighting Black women's political and theoretical resistance to those regimes. Her project scrutinizes the extensive history of sex education policies in the United States and their role in entrenching whiteness, particularly in politically unstable times. Carnal Knowledge contends that despite their racial, class, and gender bias, sex education policies often masquerade as neutral, decoupling sexuality from its inherent political nature. This project chronicles the legislative history of sex education, discovering instances where Black women's scholarship intersects or deviates from these policies.

Carnal Knowledge employs a mixed methods approach, utilizing original archival research, legal analysis, and Black feminist theory. At the heart of the dissertation lies an exploration of how sex education has functioned as a mechanism of racial definition. Through the incisive lens of Black feminist analysis, the researcher uncovers the striking nexus between moral panics surrounding the sexuality of (white) children and the underlying anxieties over white demographic and economic decline. Delving deeper, the project probes this connection, elucidating how sex education legislation frequently serves as an instrument within a broader political strategy aimed at policing, defining, and solidifying racial and sexual hierarchies. In a political moment where ideological battles seek to suppress discussions of racial and sexual identity allegedly to protect (white) children, this study emphasizes the urgency in understanding these legislative and cultural dynamics.

Dissertation Committee

Alexis Lothian (Co-chair), Iván A Ramos (Brown University, Co-chair), Christina Hanhardt, Eva Hageman, and Zenzele Isoke

Get Tickets