abstract thesis same

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

19 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Nicely explained. Very simple to understand. Thank you!

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

• Features for Creative Writers
• Features for Work
• Features for Higher Education
• Features for Teachers
• Features for Non-Native Speakers
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Get started with ProWritingAid

Drop us a line or let's stay in touch via :

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 3. The Abstract
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

An abstract summarizes, usually in one paragraph of 300 words or less, the major aspects of the entire paper in a prescribed sequence that includes: 1) the overall purpose of the study and the research problem(s) you investigated; 2) the basic design of the study; 3) major findings or trends found as a result of your analysis; and, 4) a brief summary of your interpretations and conclusions.

Writing an Abstract. The Writing Center. Clarion University, 2009; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century . Oxford, UK: Chandos Publishing, 2010;

Importance of a Good Abstract

Sometimes your professor will ask you to include an abstract, or general summary of your work, with your research paper. The abstract allows you to elaborate upon each major aspect of the paper and helps readers decide whether they want to read the rest of the paper. Therefore, enough key information [e.g., summary results, observations, trends, etc.] must be included to make the abstract useful to someone who may want to examine your work.

How do you know when you have enough information in your abstract? A simple rule-of-thumb is to imagine that you are another researcher doing a similar study. Then ask yourself: if your abstract was the only part of the paper you could access, would you be happy with the amount of information presented there? Does it tell the whole story about your study? If the answer is "no" then the abstract likely needs to be revised.

Farkas, David K. “A Scheme for Understanding and Writing Summaries.” Technical Communication 67 (August 2020): 45-60;  How to Write a Research Abstract. Office of Undergraduate Research. University of Kentucky; Staiger, David L. “What Today’s Students Need to Know about Writing Abstracts.” International Journal of Business Communication January 3 (1966): 29-33; Swales, John M. and Christine B. Feak. Abstracts and the Writing of Abstracts . Ann Arbor, MI: University of Michigan Press, 2009.

Structure and Writing Style

I.  Types of Abstracts

To begin, you need to determine which type of abstract you should include with your paper. There are four general types.

Critical Abstract A critical abstract provides, in addition to describing main findings and information, a judgment or comment about the study’s validity, reliability, or completeness. The researcher evaluates the paper and often compares it with other works on the same subject. Critical abstracts are generally 400-500 words in length due to the additional interpretive commentary. These types of abstracts are used infrequently.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarized. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less. Informative Abstract The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Highlight Abstract A highlight abstract is specifically written to attract the reader’s attention to the study. No pretense is made of there being either a balanced or complete picture of the paper and, in fact, incomplete and leading remarks may be used to spark the reader’s interest. In that a highlight abstract cannot stand independent of its associated article, it is not a true abstract and, therefore, rarely used in academic writing.

II.  Writing Style

Use the active voice when possible , but note that much of your abstract may require passive sentence constructions. Regardless, write your abstract using concise, but complete, sentences. Get to the point quickly and always use the past tense because you are reporting on a study that has been completed.

Abstracts should be formatted as a single paragraph in a block format and with no paragraph indentations. In most cases, the abstract page immediately follows the title page. Do not number the page. Rules set forth in writing manual vary but, in general, you should center the word "Abstract" at the top of the page with double spacing between the heading and the abstract. The final sentences of an abstract concisely summarize your study’s conclusions, implications, or applications to practice and, if appropriate, can be followed by a statement about the need for additional research revealed from the findings.

Composing Your Abstract

Although it is the first section of your paper, the abstract should be written last since it will summarize the contents of your entire paper. A good strategy to begin composing your abstract is to take whole sentences or key phrases from each section of the paper and put them in a sequence that summarizes the contents. Then revise or add connecting phrases or words to make the narrative flow clearly and smoothly. Note that statistical findings should be reported parenthetically [i.e., written in parentheses].

Before handing in your final paper, check to make sure that the information in the abstract completely agrees with what you have written in the paper. Think of the abstract as a sequential set of complete sentences describing the most crucial information using the fewest necessary words. The abstract SHOULD NOT contain:

• A catchy introductory phrase, provocative quote, or other device to grab the reader's attention,
• Lengthy background or contextual information,
• Redundant phrases, unnecessary adverbs and adjectives, and repetitive information;
• Acronyms or abbreviations,
• References to other literature [say something like, "current research shows that..." or "studies have indicated..."],
• Using ellipticals [i.e., ending with "..."] or incomplete sentences,
• Jargon or terms that may be confusing to the reader,
• Citations to other works, and
• Any sort of image, illustration, figure, or table, or references to them.

Abstract. Writing Center. University of Kansas; Abstract. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Abstracts. The Writing Center. University of North Carolina; Borko, Harold and Seymour Chatman. "Criteria for Acceptable Abstracts: A Survey of Abstracters' Instructions." American Documentation 14 (April 1963): 149-160; Abstracts. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Hartley, James and Lucy Betts. "Common Weaknesses in Traditional Abstracts in the Social Sciences." Journal of the American Society for Information Science and Technology 60 (October 2009): 2010-2018; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century. Oxford, UK: Chandos Publishing, 2010; Procter, Margaret. The Abstract. University College Writing Centre. University of Toronto; Riordan, Laura. “Mastering the Art of Abstracts.” The Journal of the American Osteopathic Association 115 (January 2015 ): 41-47; Writing Report Abstracts. The Writing Lab and The OWL. Purdue University; Writing Abstracts. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-First Century . Oxford, UK: 2010; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison.

Writing Tip

Never Cite Just the Abstract!

Citing to just a journal article's abstract does not confirm for the reader that you have conducted a thorough or reliable review of the literature. If the full-text is not available, go to the USC Libraries main page and enter the title of the article [NOT the title of the journal]. If the Libraries have a subscription to the journal, the article should appear with a link to the full-text or to the journal publisher page where you can get the article. If the article does not appear, try searching Google Scholar using the link on the USC Libraries main page. If you still can't find the article after doing this, contact a librarian or you can request it from our free i nterlibrary loan and document delivery service .

• << Previous: Research Process Video Series
• Next: Executive Summary >>
• Last Updated: May 30, 2024 9:38 AM
• URL: https://libguides.usc.edu/writingguide

• How to Write a Thesis Statement for Your Research: Tips + Examples

Every research paper builds on a central argument that reflects the position of the researcher—this is known as the thesis statement. More than defining the researcher’s central argument, a good thesis statement tells the reader how to interpret the subject matter being discussed. 

Without any doubt, writing a good thesis statement is an important step in developing an effective research paper. In this article, we’ll show you how to create different types of thesis statements plus examples you can learn from. Ready? Let’s get started! 

What is a Thesis Statement?  

A thesis statement is a single sentence or assertion that captures the core argument of your research. In other words, it summarizes the claim or primary idea that you want to pass across in the dissertation. 

A good thesis statement helps you achieve two major things. First, it gives the reader a clear idea of what your research is about; that is, what the paper is saying about the topic. Next, it asserts your unique position for or against the argument at hand. 

Typically, you’d find the thesis statement at the conclusion of your research paper’s introductory paragraph. So when next you’re reading a research paper, look out for that ONE sentence that ties together the main idea of the research paper’s argument. 

Explore: 21 Chrome Extensions for Academic Researchers in 2021

Importance of a Thesis Statement

Since you have an abstract and research proposal, why should you bother writing a thesis statement? The first thing you need to know is that the abstract and thesis statement work differently. An abstract summarizes your research paper, highlighting its key points while a thesis statement communicates the core idea of your paper. 

Let’s go through a few reasons why you need a thesis statement in research. 

• A good thesis statement establishes the core idea behind your research paper. It introduces readers to the core idea of your work. 
• After reading your thesis statement, your professor would understand your unique position on the argument at hand. In other words, a thesis statement declares the position of the researcher on the specific subject. 
• It serves as an “accountability check”. When you make a claim in research, you’d have to provide supporting arguments and points that confirm this claim. 
• A good thesis helps the reader to focus on the main idea of your research paper. 
• A thesis statement sets the pace for your essay and helps you to organize your ideas neatly. 
• It tells the audience what comes next by presenting the writer’s point of view. The rest of your paper is about reinforcing this statement with supporting facts or case studies.
• A good thesis statement helps you achieve cohesion and coherence in your essay. 

Read: Writing Research Proposals: Tips, Examples & Mistakes

Categories of Thesis Statements

1. informative thesis .

You’d find an informative thesis statement in essays and research papers that do not argue for or against a topic. In other words, an informative thesis is one that simply communicates the purpose of an essay, without making any arguments or claims that can be true or false. 

When writing an informative thesis, your primary focus should be communicating the purpose of your research in a clear and concise manner. Be careful not to steer up any arguments or make any claims that you need to provide evidence for. 

Examples of Informative Thesis Statements 

• The first wave of feminism focused on securing women’s rights to vote and other legal issues. 
• Diabetes is a major cause of medical conditions like blindness, kidney failure, and stroke. 

Important Read: Research Questions: Definitions, Types + [Examples]

2. Persuasive Thesis  

A persuasive thesis statement is one that makes a claim and goes on to show why that claim is true. Unlike an informative thesis, a persuasive thesis sets out to make a bold argument that forms the core idea of your research process. 

Persuasive statements have two parts. In the first part, the researcher makes an assertion that she believes to be true. In the second part of the statement, the researcher provides some evidence to back up this claim. The goal is to provide a solid backing that convinces the reader to agree with the researcher’s position. 

Let’s look at a few examples of a persuasive thesis statement. 

Learn About: How to Write a Problem Statement for your Research

Examples of a Persuasive Thesis Statement

• Students who sleep early perform better in the classroom because they have higher levels of concentration. 
• Peanut butter and jelly sandwiches are the best types of sandwiches because they are versatile, easy to make, and taste good.

Many research papers adopt persuasive thesis statements because it allows the researcher to highlight major discoveries from their systematic investigation. 

Learn More: Cross-Sectional Studies: Types, Pros, Cons & Uses

Types of Thesis Statements 

Now that you’re familiar with the major categories of thesis statements, let’s discuss some common types of thesis in academic research. 

1. Analytical Thesis Statement 

An analytical statement is a logical presentation of the researcher’s stance in a systematic investigation. Here, the researcher breaks down an idea into different parts, evaluates these parts closely, and clearly presents the order of the analysis to the reader. This means that your thesis needs to mention the specific aspect that you’ll focus on and state what insight it gives us into the text’s meaning or purpose.

How to Formulate an Analytical Thesis Statement

• Break down your main idea into its key components.
• Discover the logical relationship among the parts.
• Discover the motives, causes, and underlying assumptions. 
• Make the required inferences and lay out evidence to support your claims. 

Examples of Analytical Thesis Statement 

Sample 1: Purdue.edu (Source)

An analysis of the college admission process reveals one challenge facing counselors: accepting students with high test scores or students with strong extracurricular backgrounds.

Sample 2: Study.com (Source) 

Though World War I had many different causes, burgeoning nationalism fomented the sense of aggression that ultimately led to the War’s beginning and proliferation.

Read: Double Blind Studies in Research: Types, Pros & Cons

2. Expository Thesis Statement 

The purpose of an expository thesis statement is to get the reader acquainted with your research paper. In other words, it sets the expectations for your essay by stating your research topic plus the key areas you will touch on in the paper. 

Because of its nature, an expository thesis doesn’t have to give a strong opinion. Rather, it should clearly communicate the theme of your essay, and hint at supporting arguments that you will touch on. After reading your expository thesis, the reader should have a clear idea of what they’ll learn from your essay. 

Examples of an Expository Thesis Statement 

Sample 1: Scribbr.com (Source)

The invention of Braille transformed the lives of blind people in the nineteenth century, but its success depended on mainstream acceptance by sighted teachers, and this process was shaped by debates about disabled people’s place in society.

Although there are different causes of world war 1, Militarism, Nationalism, Alliances, Imperialism, and Assassination led to the war’s beginning.

Read: Hypothesis Testing: Definition, Uses, Limitations + Examples

3. Argumentative Thesis Statement

This is the most common type of thesis you’d find in research papers. Basically, the purpose of an argumentative thesis is to make a claim that people can agree or disagree with. Throughout the research paper, you’d have to provide facts, figures, and data that convince the audience to agree with your position.  

Examples of an Argumentative Thesis Statement 

• Children who have single parents find socialization more challenging compared to their counterparts. 
• Junk food can help you become healthier and get rid of excess calories. 

Elements of a Good Thesis Statement

How do you know you’ve written an excellent thesis statement? The simple way to do this is to match your thesis statement against the features on this list. 

In this section, we’d go through some of the elements of a good thesis statement. 

• Interpretation: More than regurgitating facts, a good thesis statement must explain these facts and show their significance.
• Precision: Your thesis statement should highlight specific facts, and create a logical relationship among these facts. it states that two ideas were similar or different, without explaining how they were similar or different, it is too vague.
• Element of Surprise: Do you have any information that can catch the reader’s attention and convince them to agree with your position? Now is a good time to highlight them and win the reader over to your side. 
• Evidence: A thesis statement should contain an opinion or point of view that can be supported with evidence.
• Demonstrability : Any claims you’ve made in your statement must be backed by reasons and examples for your opinion. 

Read: Research Report: Definition, Types + [Writing Guide]

Steps for Writing a Thesis Statement

Step 1: Start with a Question 

Ask yourself a simple question concerning what you’d like to explore or find out regarding a topic. 

Step 2: Write an Answer to this Question

After conducting your initial research, string all the information you gather to form a tentative answer to this question. The purpose of this temporary response is to guide your research. 

Step 3: Develop Your Answer

This is the point where you flesh out your answer with new and supporting evidence. You need to consider why this is your answer and how you will convince your reader to agree with you.

Examples of a Strong Thesis Statement

Sample 1 : Schools should provide educational resources for low-income students so that they can perform better in the classroom. 

Sample 2 : Prioritizing diversity and inclusion in the workplace can lead to richer ideas, better employee collaboration, and more empathy among people from different backgrounds. 

Sample 3 : Countries with high poverty levels record higher incidences of violence.   

Sample 4: Because half of all American elementary school children consume nine times the recommended daily allowance of sugar, schools should be required to replace the beverages in soda machines with healthy alternatives.

Examples of a Weak Thesis Statement 

A weak thesis statement is too broad or ambiguous, making it difficult for the reader to understand your position. Weak thesis statements may also lack evidence. Here are a few samples. 

Sample 1: Technology has its advantages and disadvantages. 

This statement is weak because it doesn’t point to the type of technology you’re referring to. Also, it attempts to argue two points in a single sentence. 

Sample 2 : Taking affirmative action is a way to reduce gender-based violence. 

This is a statement of fact that doesn’t pique the interest of the reader. Instead, you should establish a thesis that is arguable, and state the how or why of your position. 

Although a thesis statement is just a single sentence, you should take your time to formulate one. Before you develop an argument on any topic, you have to collect and organize evidence, look for possible relationships between known facts (such as surprising contrasts or similarities), and think about the significance of these relationships.

When you have a well-rounded understanding of the data, you can build a strong thesis statement that captures the core of your research.

Connect to Formplus, Get Started Now - It's Free!

• analytical thesis statement
• argumentative thesis statement
• expository thesis statement
• informative thesis statement
• persuasive thesis
• thesis statement categories
• busayo.longe

You may also like:

Explanatory Research: Types, Examples, Pros & Cons

This article will take you through some of the types of explanatory research and what they are used for.

Exploratory Research: What are its Method & Examples?

Overview on exploratory research, examples and methodology. Shows guides on how to conduct exploratory research with online surveys

Recall Bias: Definition, Types, Examples & Mitigation

This article will discuss the impact of recall bias in studies and the best ways to avoid them during research.

What is Pure or Basic Research? + [Examples & Method]

Simple guide on pure or basic research, its methods, characteristics, advantages, and examples in science, medicine, education and psychology

Formplus - For Seamless Data Collection

Collect data the right way with a versatile data collection tool. try formplus and transform your work productivity today..

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

• Enroll & Pay
• Prospective Students
• Current Students
• Degree Programs

An abstract is a summary of a longer written document. It is written with the same organization as the original document, usually without “review” or comment. Abstract lengths vary by discipline and purpose of the project; generally, they are 50-100 words for a short paper and 150-200 for a longer one. Abstracts are typically placed prior to the manuscript. Abstracts fall into two categories: indicative and informative.

The  indicative  abstract covers a less structured document (like a book, essay or editorial). It helps readers to understand the focus, arguments and conclusions of the larger document so that they can determine whether to read it more thoroughly.

An  informative  abstract is used for more strictly structured documents (like scientific experiments or investigations) and includes the elements of the original research report: its objective, methods, results, and conclusions.

Whichever type of abstract you write, it should be able to stand alone as a statement separate from the larger document.

Components of an Abstract

Abstracts, at heart, are decision-making documents. Based on the abstract, readers decide whether to read your article, support your proposal, grant your funding, or accept you to a conference. To write a successful abstract, you need to include these three components:  Context ,  Problem , and  Response  (CPR).

By definition, context is essentially what surrounds a thing. In other words, in order to understand a snippet of conversation, we often ask, “He said that in what context?” When we provide context for our readers, we are establishing a comfortable common ground, a shared understanding that provides an entry point into the larger or more specific ideas of our project. Common ground might take the form of a shared belief, a kind of truism, or a basic principle of the field. Frequently this takes the form of a brief survey of the field or an overview of a current situation. This might include what those in the discipline already know to be true, a point of conventional wisdom, something we’ve all seen and heard, a primary text, a case study, or an anecdote of some kind. 

The problem is essentially establishing a deficit. A deficit in this sense refers to a gap in knowledge or what might be misunderstood or overlooked. The problem is what our research question or project is trying to solve. This might be, for example, a practical question (how can we best distribute H1N1 vaccine?) or it can be a theoretical or conceptual question (to what degree is marital behavior determined by intergenerational influences?). As researchers, we begin with the problem, but often by the time we are ready to write our abstracts, introductions, or proposals, the problem has moved into the background, obscured by the details of our work. However, in terms of meeting the reader’s needs, the problem is an essential and necessary feature. The reader’s level of investment, and thus the grade, the acceptance, the funding for your project hinges upon how successfully you articulate the problem. 

This is generally your summary or description of your paper or project, which you position in dialogue with the problem as you’ve established it. Depending on the nature of your project, in your response you might explicitly state your main point or thesis, or you might present your hypothesis and generalize your results. In addition, research that relies on primary data often includes an abbreviated description of the methodology used. 

The ABCs of a Good Abstract

• Accuracy:  Include only information included in the original document.
• Brevity:  Get straight to the point, use precise language, and do not include superfluous adjectives.
• Clarity:  Do not use unnecessary technical jargon, colloquialisms or obscure vocabulary and detail and always explain any acronyms.

Abstracts are challenging because they require decisions about what constitutes that essence of a document full of important information. Here are some tips to help you:

• Write the final version of your abstract after your paper is completed so the organization and development of the two documents match.
• Begin with a topic sentence: what is this paper about?
• Use an outline to confirm that you are summarizing the most important information.
• Incorporate keywords for electronic retrieval into the text. (They may also be listed at the end of the abstract text.) Bibliographic references and graphics are typically excluded from an abstract.

Keep your readers in mind as you develop the abstract:

• Assume that they are generally familiar with the information being abstracted but are interested in evaluating the usefulness of the entire document for their research.
• Write in a concise and readable style so that they can read through the abstract quickly to ascertain the essence of the larger document.
• Provide information in each sentence; for example, if it is important enough to include, “a cost was given,” it is appropriate to give the specifics: “The cost was $5.25 per gallon.”

Sample Abstracts

Variation Among Isolates of Fusarium Circinatum in Tolerance of the Anti-fungal Metabolite   BOA

Amir Begovic

Fusarium circinatum is a fungal pathogen responsible for a disease affecting pines known as pitch canker. Although this is what F. circinatum is notorious for, recent work has shown that this fungus also can colonize grasses. However, the importance of grasses as a resource in the life history of F. circinatum is unknown. To learn more about how well adapted F. circinatum is to exploitation of grass hosts, the present study was undertaken to determine how well this fungus can tolerate anti-fungal compounds produced by corn, a member of the grass family. To this end, plates of PDA (potato dextrose agar) were amended with various concentrations of BOA (2-benzoxazolinone), and inoculated with a colonized agar plug of F. circinatum. All tested strains failed to grow at concentrations of 0.75 and 1.0 mg of BOA per ml of medium. Colonized plugs transferred from plates containing BOA to PDA without BOA did not grow, indicating the fungus was killed by exposure to this anti-fungal compound. The same strains were able to survive exposure to 0.5 mg of BOA per ml, although growth was strongly inhibited. The next step will be to test for heritable variation in tolerance of BOA in F. circinatum. (197 words)

Source: University of California, Davis 2013 Undergraduate Research Symposium  

Connecting the U.S. Media: A Network Analysis of Mutual Fund Ownership in Communication Corporations

Grace A. Benefield

Social scientists have long been interested in the ever increasing concentration and effects of computer, telecommunication and media corporations, such as Google, Apple and Verizon. By gathering statistics on mutual fund and individual stock owners, the study compares the proportion of institutional investment across communication corporations, which are service or technology corporations responsible for the exchange of information. The research incorporates network analysis software to identify outliers and central players in this web of media owners. The study seeks to measure centrality as a connection between two companies and their investors' similar interest investments, such as a similarity in size, expectations for growth, company values, or industrial interests. Surprisingly, the study finds that market capitalization did not result in centrality, such as IBM's peripheral status. The results find that smaller telecommunications companies, such as Sprint and Comcast, share a large portion of the same mutual funds. In contrast, other industries appear to have intermixed and varietal institutional owners. There are also indications of mutual fund interest groupings based on geography, as in west coast companies Disney, HP, and Qualcomm. Further research is needed to compare the individual stock owners who control large interests in various companies. (196 words)

Source: University of California, Davis 2013 Undergraduate Research Symposium

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 412 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

Abstract Vs. Introduction — Do you know the difference?

Ross wants to publish his research. Feeling positive about his research outcomes, he begins to draft his manuscript. After completing the abstract, he proceeds to write the introduction. That’s when he pauses in confusion. Do the abstract and introduction mean the same? How is the content for both the sections different?

This is a dilemma faced by several young researchers while drafting their first manuscript. An  abstract  is similar to a summary except that it is more concise and direct. Whereas, the  introduction  section of your paper is more detailed. It states why you conducted your study, what you wanted to accomplish, and what is your hypothesis.

This blog will allow us to learn more about the difference between the abstract and the introduction.

What Is an Abstract for a Research Paper?

An abstract provides the reader with a clear description of your research study and its results without the reader having to read the entire paper. The details of a study, such as precise methods and measurements, are not necessarily mentioned in the abstract. The abstract is an important tool for researchers who must sift through hundreds of papers from their field of study.

The abstract  holds more significance  in articles without open access. Reading the abstract would give an idea of the articles, which would otherwise require monetary payment for access. In most cases, reviewers will read the abstract to decide whether to continue to review the paper, which is important for you.

Your abstract should begin with a background or objective to clearly state why the research was done, its importance to the field of study, and any previous roadblocks encountered. It should include a very concise version of your methods, results, and conclusions but no references. It must be brief while still providing enough information so that the reader need not read the full article. Most journals ask that the abstract be no more than 200–250 words long.

Format of an Abstract

There are two general   formats — structured and unstructured. A  structured abstract   helps the reader find pertinent information  very quickly. It is divided into sections clearly defined by headings as follows:

• Background : Latest information on the topic; key phrases that pique interest (e.g., “…the role of this enzyme has never been clearly understood”).
• Objective : The research goals; what the study examined and why.
• Methods : Brief description of the study (e.g., retrospective study).
• Results : Findings and observations.
• Conclusions : Were these results expected? Whether more research is needed or not?

Authors get tempted to write too much  in an abstract but it is helpful to remember that there is usually a maximum word count. The main point is to relay the important aspects of the study without sharing too many details so that the readers do not have to go through the entire manuscript text for finding more information.

The  unstructured abstract  is often used in fields of study that do not fall under the category of science. This type of abstracts does not have different sections. It summarizes the manuscript’s objectives, methods, etc., in one paragraph.

Related: Create an impressive manuscript with a compelling abstract.   Check out these resources and improve your abstract writing process!

Lastly, you must check the author guidelines of the target journal. It will describe the format required and the maximum word count of your abstract.

What Is an Introduction?

Your introduction is the first section of your research paper . It is not a repetition of the abstract. It does not provide data about methods, results, or conclusions. However, it  provides more in-depth information  on the background of the subject matter. It also explains your hypothesis , what you attempted to discover, or issues that you wanted to resolve. The introduction will also explain if and why your study is new in the subject field and why it is important.

It is often a good idea to wait until the rest of the paper is completed before drafting your introduction. This will help you to stay focused on the manuscript’s important points. The introduction, unlike the abstract, should contain citations to references. The information will help guide your readers through the rest of your document. The key tips for writing an effective introduction :

• Beginning:  The importance of the study.
• Tone/Tense:  Formal, impersonal; present tense.
• Content:  Brief description of manuscript but without results and conclusions.
• Length:  Generally up to four paragraphs. May vary slightly with journal guidelines.

Once you are sure that possible doubts on the difference between the abstract and introduction are clear, review and submit your manuscript.

What struggles have you had in writing an abstract or introduction? Were you able to resolve them? Please share your thoughts with us in the comments section below.

Insightful and educating Indeed. Thank You

Quite a helpful and precise for scholars and students alike. Keep it up…

thanks! very helpful.

thanks. helped

Greeting from Enago Academy! Thank you for your positive comment. We are glad to know that you found our resources useful. Your feedback is very valuable to us. Happy reading!

Really helpful as I prepare to write the introduction to my dissertation. Thank you Enago Academy

This gave me more detail finding the pieces of a research article being used for a critique paper in nursing school! thank you!

The guidelines have really assisted me with my assignment on writing argument essay on social media. The difference between the abstract and introduction is quite clear now for me to start my essay…thank you so much…

Quite helpful! I’m writing a paper on eyewitness testimony for one of my undergraduate courses at the University of Northern Colorado, and found this to be extremely helpful in clarifications

This was hugely helpful. Keep up the great work!

This was quite helpful. Keep it up!

Very comprehensive and simple. thanks

As a student, this website has helped me greatly to understand how to formally report my research

Thanks a lot.I can now handle my doubts after reading through.

thanks alot! this website has given me huge clarification on writing a good Introduction and Abttract i really appreciate what you share!. hope to see more to come1 God bless you.

Thank you, this was very helpful for writing my research paper!

That was helpful. geed job.

Thank you very much. This article really helped with my assignment.

Woohoo! Amazing. I couldnt stop listening to the audio; so enlightening.

Thank you for such a clear breakdown!

I am grateful for the assistance rendered me. I was mystified over the difference between an abstract and introduction during thesis writing. Now I have understood the concept theoretically, I will put that in practice. So thanks a lots it is great help to me.

Rate this article Cancel Reply

Your email address will not be published.

Enago Academy's Most Popular Articles

• AI in Academia
• Infographic
• Manuscripts & Grants
• Reporting Research
• Trending Now

Can AI Tools Prepare a Research Manuscript From Scratch? — A comprehensive guide

As technology continues to advance, the question of whether artificial intelligence (AI) tools can prepare…

• Old Webinars
• Webinar Mobile App

Demystifying Research Methodology With Field Experts

Choosing research methodology Research design and methodology Evidence-based research approach How RAxter can assist researchers

• Manuscript Preparation
• Publishing Research

How to Choose Best Research Methodology for Your Study

Successful research conduction requires proper planning and execution. While there are multiple reasons and aspects…

Top 5 Key Differences Between Methods and Methodology

While burning the midnight oil during literature review, most researchers do not realize that the…

如何准备高质量的金融和科技领域学术论文

如何寻找原创研究课题 快速定位目标文献的有效搜索策略 如何根据期刊指南准备手稿的对应部分 论文手稿语言润色实用技巧分享

How to Draft the Acknowledgment Section of a Manuscript

Discussion Vs. Conclusion: Know the Difference Before Drafting Manuscripts

Annex Vs. Appendix: Do You Know the Difference?

Sign-up to read more

Subscribe for free to get unrestricted access to all our resources on research writing and academic publishing including:

• 2000+ blog articles
• 50+ Webinars
• 10+ Expert podcasts
• 50+ Infographics
• 10+ Checklists
• Research Guides

We hate spam too. We promise to protect your privacy and never spam you.

I am looking for Editing/ Proofreading services for my manuscript Tentative date of next journal submission:

As a researcher, what do you consider most when choosing an image manipulation detector?

Advertisement

Asian hornets have overwintered in the UK for the first time

Queen Asian hornets found in East Sussex this year are a genetic match to a 2023 nest, suggesting the invasive species is becoming established in the UK

By Madeleine Cuff

31 May 2024

Asian hornets are a threat to native insects in the UK

Eduardo Gonzalez / Alamy

Asian hornets found in East Sussex, UK, this spring are genetically linked to a nest destroyed in the area last year, confirming that the invasive species has overwintered in Britain for the first time.

UK officials have been fighting to prevent the Asian hornet ( Vespa velutina ) from becoming established in the country since the first sighting in 2016.

Spiders think with their webs, challenging our ideas of intelligence

Asian hornets are smaller than native European hornets ( Vespa…

Sign up to our weekly newsletter

Receive a weekly dose of discovery in your inbox! We'll also keep you up to date with New Scientist events and special offers.

To continue reading, subscribe today with our introductory offers

No commitment, cancel anytime*

Offer ends 2nd of July 2024.

*Cancel anytime within 14 days of payment to receive a refund on unserved issues.

Inclusive of applicable taxes (VAT)

Existing subscribers

More from New Scientist

Explore the latest news, articles and features

Asian honeybees scream in alarm when giant hornets attack the hive

Asian honeybees use animal faeces to defend themselves from hornets, wasps can grasp abstract concepts such as 'same' and 'different', environment, bees vs wasps: which insect is really worthy of all the buzz.

Subscriber-only

Popular articles

Trending New Scientist articles

• Search Menu
• Sign in through your institution
• Advance Articles
• Editor's Choice
• Braunwald's Corner
• ESC Guidelines
• EHJ Dialogues
• Issue @ a Glance Podcasts
• CardioPulse
• Weekly Journal Scan
• European Heart Journal Supplements
• Year in Cardiovascular Medicine
• Asia in EHJ
• Most Cited Articles
• ESC Content Collections
• Author Guidelines
• Submission Site
• Why publish with EHJ?
• Open Access Options
• Submit from medRxiv or bioRxiv
• Author Resources
• Self-Archiving Policy
• Read & Publish
• Advertising and Corporate Services
• Advertising
• Reprints and ePrints
• Sponsored Supplements
• Journals Career Network
• About European Heart Journal
• Editorial Board
• About the European Society of Cardiology
• ESC Publications
• War in Ukraine
• ESC Membership
• ESC Journals App
• Developing Countries Initiative
• Dispatch Dates
• Terms and Conditions
• Journals on Oxford Academic
• Books on Oxford Academic

Article Contents

Risk of heart failure in inflammatory bowel disease: a swedish population-based study.

• Article contents
• Figures & tables
• Supplementary Data

Jiangwei Sun, Jialu Yao, Ola Olén, Jonas Halfvarson, David Bergman, Fahim Ebrahimi, Annika Rosengren, Johan Sundström, Jonas F Ludvigsson, Risk of heart failure in inflammatory bowel disease: a Swedish population-based study, European Heart Journal , 2024;, ehae338, https://doi.org/10.1093/eurheartj/ehae338

• Permissions Icon Permissions

Dysregulation of inflammatory and immune responses has been implicated in the pathogenesis of heart failure (HF). But even if inflammation is a prerequisite for inflammatory bowel disease (IBD), little is known about HF risk in IBD.

In this Swedish nationwide cohort, patients with biopsy-confirmed IBD were identified between 1969 and 2017 [n = 81,749, Crohn’s disease (CD, n = 24,303), ulcerative colitis (UC, n = 45,709), and IBD-unclassified (IBD-U, n = 11,737)]. Each patient was matched with up to five general population reference individuals (n = 382,190) and IBD-free full siblings (n = 95,239) and followed until 31 December 2019. Flexible parametric survival models estimated the adjusted hazard ratio (aHR) and standardized cumulative incidence for HF, with 95% confidence intervals (CI).

There were 5,582 incident HF identified in IBD patients (incidence rate [IR]: 50.3/10,000 person-years) and 20,343 in reference individuals (IR: 37.9) during a median follow-up of 12.4 years. IBD patients had a higher risk of HF than reference individuals (aHR 1.19, 95% CI 1.15 to 1.23). This increased risk remained significant ≥20 years after IBD diagnosis, leading to one extra HF case per 130 IBD patients until then. The increased risk was also observed across IBD subtypes: CD (IR: 46.9 vs. 34.4; aHR 1.28 [1.20 to 1.36]), UC (IR: 50.1 vs. 39.7; aHR 1.14 [1.09 to 1.19]), and IBD-U (IR: 60.9 vs. 39.0; aHR 1.28 [1.16 to 1.42]). Sibling-controlled analyses showed slightly attenuated association (IBD: aHR 1.10 [1.03 to 1.19]).

Patients with IBD had a moderately higher risk of developing HF for ≥20 years after IBD diagnosis than the general population.

• heart failure
• inflammatory bowel disease

Supplementary data

Email alerts, companion article.

• Human Immunology of Heart Failure: Deconstructing Inflammatory Risk

Related articles in PubMed

Citing articles via, looking for your next opportunity, affiliations.

• Online ISSN 1522-9645
• Print ISSN 0195-668X
• Copyright © 2024 European Society of Cardiology
• About Oxford Academic
• Publish journals with us
• University press partners
• What we publish
• New features  
• Open access
• Institutional account management
• Rights and permissions
• Get help with access
• Accessibility
• Media enquiries
• Oxford University Press
• Oxford Languages
• University of Oxford

Oxford University Press is a department of the University of Oxford. It furthers the University's objective of excellence in research, scholarship, and education by publishing worldwide

• Copyright © 2024 Oxford University Press
• Cookie settings
• Cookie policy
• Privacy policy
• Legal notice

This Feature Is Available To Subscribers Only

Sign In or Create an Account

This PDF is available to Subscribers Only

For full access to this pdf, sign in to an existing account, or purchase an annual subscription.