introduction journal thesis

Get science-backed answers as you write with Paperpal's Research feature

How to Write a Research Paper Introduction (with Examples)

The research paper introduction section, along with the Title and Abstract, can be considered the face of any research paper. The following article is intended to guide you in organizing and writing the research paper introduction for a quality academic article or dissertation.

The research paper introduction aims to present the topic to the reader. A study will only be accepted for publishing if you can ascertain that the available literature cannot answer your research question. So it is important to ensure that you have read important studies on that particular topic, especially those within the last five to ten years, and that they are properly referenced in this section. 1 What should be included in the research paper introduction is decided by what you want to tell readers about the reason behind the research and how you plan to fill the knowledge gap. The best research paper introduction provides a systemic review of existing work and demonstrates additional work that needs to be done. It needs to be brief, captivating, and well-referenced; a well-drafted research paper introduction will help the researcher win half the battle.

The introduction for a research paper is where you set up your topic and approach for the reader. It has several key goals:

• Present your research topic
• Capture reader interest
• Summarize existing research
• Position your own approach
• Define your specific research problem and problem statement
• Highlight the novelty and contributions of the study
• Give an overview of the paper’s structure

The research paper introduction can vary in size and structure depending on whether your paper presents the results of original empirical research or is a review paper. Some research paper introduction examples are only half a page while others are a few pages long. In many cases, the introduction will be shorter than all of the other sections of your paper; its length depends on the size of your paper as a whole.

• Break through writer’s block. Write your research paper introduction with Paperpal Copilot

Table of Contents

What is the introduction for a research paper, why is the introduction important in a research paper, craft a compelling introduction section with paperpal. try now, 1. introduce the research topic:, 2. determine a research niche:, 3. place your research within the research niche:, craft accurate research paper introductions with paperpal. start writing now, frequently asked questions on research paper introduction, key points to remember.

The introduction in a research paper is placed at the beginning to guide the reader from a broad subject area to the specific topic that your research addresses. They present the following information to the reader

• Scope: The topic covered in the research paper
• Context: Background of your topic
• Importance: Why your research matters in that particular area of research and the industry problem that can be targeted

The research paper introduction conveys a lot of information and can be considered an essential roadmap for the rest of your paper. A good introduction for a research paper is important for the following reasons:

• It stimulates your reader’s interest: A good introduction section can make your readers want to read your paper by capturing their interest. It informs the reader what they are going to learn and helps determine if the topic is of interest to them.
• It helps the reader understand the research background: Without a clear introduction, your readers may feel confused and even struggle when reading your paper. A good research paper introduction will prepare them for the in-depth research to come. It provides you the opportunity to engage with the readers and demonstrate your knowledge and authority on the specific topic.
• It explains why your research paper is worth reading: Your introduction can convey a lot of information to your readers. It introduces the topic, why the topic is important, and how you plan to proceed with your research.
• It helps guide the reader through the rest of the paper: The research paper introduction gives the reader a sense of the nature of the information that will support your arguments and the general organization of the paragraphs that will follow. It offers an overview of what to expect when reading the main body of your paper.

What are the parts of introduction in the research?

A good research paper introduction section should comprise three main elements: 2

• What is known: This sets the stage for your research. It informs the readers of what is known on the subject.
• What is lacking: This is aimed at justifying the reason for carrying out your research. This could involve investigating a new concept or method or building upon previous research.
• What you aim to do: This part briefly states the objectives of your research and its major contributions. Your detailed hypothesis will also form a part of this section.

How to write a research paper introduction?

The first step in writing the research paper introduction is to inform the reader what your topic is and why it’s interesting or important. This is generally accomplished with a strong opening statement. The second step involves establishing the kinds of research that have been done and ending with limitations or gaps in the research that you intend to address. Finally, the research paper introduction clarifies how your own research fits in and what problem it addresses. If your research involved testing hypotheses, these should be stated along with your research question. The hypothesis should be presented in the past tense since it will have been tested by the time you are writing the research paper introduction.

The following key points, with examples, can guide you when writing the research paper introduction section:

• Highlight the importance of the research field or topic
• Describe the background of the topic
• Present an overview of current research on the topic

Example: The inclusion of experiential and competency-based learning has benefitted electronics engineering education. Industry partnerships provide an excellent alternative for students wanting to engage in solving real-world challenges. Industry-academia participation has grown in recent years due to the need for skilled engineers with practical training and specialized expertise. However, from the educational perspective, many activities are needed to incorporate sustainable development goals into the university curricula and consolidate learning innovation in universities.

• Reveal a gap in existing research or oppose an existing assumption
• Formulate the research question

Example: There have been plausible efforts to integrate educational activities in higher education electronics engineering programs. However, very few studies have considered using educational research methods for performance evaluation of competency-based higher engineering education, with a focus on technical and or transversal skills. To remedy the current need for evaluating competencies in STEM fields and providing sustainable development goals in engineering education, in this study, a comparison was drawn between study groups without and with industry partners.

• State the purpose of your study
• Highlight the key characteristics of your study
• Describe important results
• Highlight the novelty of the study.
• Offer a brief overview of the structure of the paper.

Example: The study evaluates the main competency needed in the applied electronics course, which is a fundamental core subject for many electronics engineering undergraduate programs. We compared two groups, without and with an industrial partner, that offered real-world projects to solve during the semester. This comparison can help determine significant differences in both groups in terms of developing subject competency and achieving sustainable development goals.

Write a Research Paper Introduction in Minutes with Paperpal

Paperpal Copilot is a generative AI-powered academic writing assistant. It’s trained on millions of published scholarly articles and over 20 years of STM experience. Paperpal Copilot helps authors write better and faster with:

• Real-time writing suggestions
• In-depth checks for language and grammar correction
• Paraphrasing to add variety, ensure academic tone, and trim text to meet journal limits

With Paperpal Copilot, create a research paper introduction effortlessly. In this step-by-step guide, we’ll walk you through how Paperpal transforms your initial ideas into a polished and publication-ready introduction.

How to use Paperpal to write the Introduction section

Step 1: Sign up on Paperpal and click on the Copilot feature, under this choose Outlines > Research Article > Introduction

Step 2: Add your unstructured notes or initial draft, whether in English or another language, to Paperpal, which is to be used as the base for your content.

Step 3: Fill in the specifics, such as your field of study, brief description or details you want to include, which will help the AI generate the outline for your Introduction.

Step 4: Use this outline and sentence suggestions to develop your content, adding citations where needed and modifying it to align with your specific research focus.

Step 5: Turn to Paperpal’s granular language checks to refine your content, tailor it to reflect your personal writing style, and ensure it effectively conveys your message.

You can use the same process to develop each section of your article, and finally your research paper in half the time and without any of the stress.

The purpose of the research paper introduction is to introduce the reader to the problem definition, justify the need for the study, and describe the main theme of the study. The aim is to gain the reader’s attention by providing them with necessary background information and establishing the main purpose and direction of the research.

The length of the research paper introduction can vary across journals and disciplines. While there are no strict word limits for writing the research paper introduction, an ideal length would be one page, with a maximum of 400 words over 1-4 paragraphs. Generally, it is one of the shorter sections of the paper as the reader is assumed to have at least a reasonable knowledge about the topic. 2 For example, for a study evaluating the role of building design in ensuring fire safety, there is no need to discuss definitions and nature of fire in the introduction; you could start by commenting upon the existing practices for fire safety and how your study will add to the existing knowledge and practice.

When deciding what to include in the research paper introduction, the rest of the paper should also be considered. The aim is to introduce the reader smoothly to the topic and facilitate an easy read without much dependency on external sources. 3 Below is a list of elements you can include to prepare a research paper introduction outline and follow it when you are writing the research paper introduction. Topic introduction: This can include key definitions and a brief history of the topic. Research context and background: Offer the readers some general information and then narrow it down to specific aspects. Details of the research you conducted: A brief literature review can be included to support your arguments or line of thought. Rationale for the study: This establishes the relevance of your study and establishes its importance. Importance of your research: The main contributions are highlighted to help establish the novelty of your study Research hypothesis: Introduce your research question and propose an expected outcome. Organization of the paper: Include a short paragraph of 3-4 sentences that highlights your plan for the entire paper

Cite only works that are most relevant to your topic; as a general rule, you can include one to three. Note that readers want to see evidence of original thinking. So it is better to avoid using too many references as it does not leave much room for your personal standpoint to shine through. Citations in your research paper introduction support the key points, and the number of citations depend on the subject matter and the point discussed. If the research paper introduction is too long or overflowing with citations, it is better to cite a few review articles rather than the individual articles summarized in the review. A good point to remember when citing research papers in the introduction section is to include at least one-third of the references in the introduction.

The literature review plays a significant role in the research paper introduction section. A good literature review accomplishes the following: Introduces the topic – Establishes the study’s significance – Provides an overview of the relevant literature – Provides context for the study using literature – Identifies knowledge gaps However, remember to avoid making the following mistakes when writing a research paper introduction: Do not use studies from the literature review to aggressively support your research Avoid direct quoting Do not allow literature review to be the focus of this section. Instead, the literature review should only aid in setting a foundation for the manuscript.

Remember the following key points for writing a good research paper introduction: 4

• Avoid stuffing too much general information: Avoid including what an average reader would know and include only that information related to the problem being addressed in the research paper introduction. For example, when describing a comparative study of non-traditional methods for mechanical design optimization, information related to the traditional methods and differences between traditional and non-traditional methods would not be relevant. In this case, the introduction for the research paper should begin with the state-of-the-art non-traditional methods and methods to evaluate the efficiency of newly developed algorithms.
• Avoid packing too many references: Cite only the required works in your research paper introduction. The other works can be included in the discussion section to strengthen your findings.
• Avoid extensive criticism of previous studies: Avoid being overly critical of earlier studies while setting the rationale for your study. A better place for this would be the Discussion section, where you can highlight the advantages of your method.
• Avoid describing conclusions of the study: When writing a research paper introduction remember not to include the findings of your study. The aim is to let the readers know what question is being answered. The actual answer should only be given in the Results and Discussion section.

To summarize, the research paper introduction section should be brief yet informative. It should convince the reader the need to conduct the study and motivate him to read further. If you’re feeling stuck or unsure, choose trusted AI academic writing assistants like Paperpal to effortlessly craft your research paper introduction and other sections of your research article.

1. Jawaid, S. A., & Jawaid, M. (2019). How to write introduction and discussion. Saudi Journal of Anaesthesia, 13(Suppl 1), S18.

2. Dewan, P., & Gupta, P. (2016). Writing the title, abstract and introduction: Looks matter!. Indian pediatrics, 53, 235-241.

3. Cetin, S., & Hackam, D. J. (2005). An approach to the writing of a scientific Manuscript1. Journal of Surgical Research, 128(2), 165-167.

4. Bavdekar, S. B. (2015). Writing introduction: Laying the foundations of a research paper. Journal of the Association of Physicians of India, 63(7), 44-6.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• Scientific Writing Style Guides Explained
• 5 Reasons for Rejection After Peer Review
• Ethical Research Practices For Research with Human Subjects
• 8 Most Effective Ways to Increase Motivation for Thesis Writing 

Practice vs. Practise: Learn the Difference

Academic paraphrasing: why paperpal’s rewrite should be your first choice , you may also like, how to write a high-quality conference paper, academic editing: how to self-edit academic text with..., measuring academic success: definition & strategies for excellence, phd qualifying exam: tips for success , ai in education: it’s time to change the..., is it ethical to use ai-generated abstracts without..., what are journal guidelines on using generative ai..., quillbot review: features, pricing, and free alternatives, what is an academic paper types and elements , should you use ai tools like chatgpt for....

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write a Journal Article Introduction Section

Our journal manuscript series has covered the various sections of a scientific article according to the order in which we recommend you write them ( Figures ,  Methods section ,  Results section ,  Discussion section , and Conclusion section ). In this second-to-last installment, we’ll talk about the Introduction and how to draft it in a way that intrigues your readers and makes them want to continue reading. After all, the journal publications industry is a business, so editors won’t accept your article unless they’re confident their readership will be interested.

What is an Introduction in a research paper?

After the Abstract (the final section of the paper you should draft) and the visual aids, like figures,  a reader’s first true interaction with your work is the Introduction . Thus, like any other story, you must set a compelling stage that invites your readers into your research world. Essentially,  your Introduction will establish the foundation upon which your readers will approach your work . You lay down the rules of interpretation, and if your manuscript follows the tips we’ve given in this series, your readers should be able to logically apply those rules throughout all parts of your paper, including the conclusion in your Discussion section.

Before we examine what specifically belongs in this critical context-defining section of your manuscript, let’s explore a practical point about writing the Introduction.

When should I write the Introduction section?

You may recall that we recommended a particular order for drafting your manuscript—an order that suggests the Introduction should be written second to last. You may also remember we talked about how the Discussion (or the Conclusion section for journals that separate the Discussion and Conclusion) should answer the questions raised in the Introduction. So which is it? Write the Introduction first or the Discussion? Honestly, the Introduction should come second to last because it is one of the harder sections of the manuscript to nail correctly. Therefore,  we recommend writing the Introduction in two stages.

Start with a skeletal Introduction that clearly states the hypothesis (the question your research answers). Then proceed with fully drafting the remaining parts of your manuscript, including analyzing your results in the Discussion and drawing rough conclusions that you will later refine. Once you’ve finished the other parts, return to your Introduction and incorporate the information we outline further below under the heading “What should I include in the Introduction?” After, modify the Discussion’s conclusion accordingly and polish the entire piece once again.

What to Include in the Introduction Section

Your paper must read like a chronological story ; it will begin with point A (the Introduction) and advance in time toward point B (the Discussion/Conclusion). If you recall from our prior article,  the Discussion should answer the questions  “why  this  particular study was needed to fill the gap in scientific knowledge we currently have and why that gap needed filling in the first place.” The Introduction answers similar but distinct questions.  The context you establish in the Introduction must first identify that there is a knowledge gap and then explain how you intend to fill that gap and why .

Imagine that your paper is an hourglass figure, as in the infographic below. Your Introduction holds the sand of knowledge that we currently have (the top bulb), and as the sand trickles through the neck (your research), it builds up a new base of knowledge (the bottom bulb). Thus your paper traces that journey from the top of the hourglass to the bottom, answering the questions in the infographic along the way. As a part of that journey, your Introduction is the starting point that answers the first three questions concisely.

As you can see from above, your Introduction should start broadly and narrow until it reaches your hypothesis. Now, let’s examine how we can achieve this flow of ideas more closely.

What is known about the current research topic?

• Start the Introduction with a strong statement that reflects your research subject area.  Use keywords from your title to help you focus and avoid starting too broadly .
• Avoid stating too many obvious facts that your target readers would know . You should be precise about the area of focus so that readers can properly orient themselves before diving into your paper.
• As a trick to help you combat too broad a start, write down your hypothesis or purpose first .
• Then work backward to think about what background information your reader needs to appreciate the significance of your study.
• Stop going back when you reach the point where your readers would be comfortable understanding the statements you make but might not be fully confident to explain all the aspects of those facts.
• Cite relevant, up-to-date primary literature to support your explanation of our current base of knowledge . Make sure to include any significant works that might contradict your argument and address the flaws with that opposing line of thought. You want your readers to conclude that your approach is more plausible than alternative theories.
• Be sure to cite your sources . Plagiarism is a serious offense in the academic community that will hurt your credibility (not to mention it is a violation of many copyright laws). Direct copying or a closely matched language should be avoided. Instead, be sure to use your own words to rephrase what you read in the literature and include references.
• Remember that  the Introduction is not meant to be a comprehensive literature review ! Don’t overwhelm your reader with a sea of citations. Instead, use key primary literature (i.e., journal articles) to quickly guide your reader from the general study area to more specific material covered by your hypothesis. In other words, the literature you cite should logically lead your reader to develop the same questions that prompted you to do your research project. Roughly a half page should suffice, but double-check with your target journal’s information for authors.

What is the gap in knowledge?

• As you describe our understanding of the relevant subject matter,  highlight areas where too little information is available . However, don’t stop at saying “little is known about…” You must elaborate and tell your readers why we should care about unearthing additional information about this knowledge gap. See the subheading “How and why should we fill that gap?” for further details.
• Alternatively, your Introduction should  identify what logical next steps can be developed based on existing research . After all, the purpose of sharing research is to prompt other researchers to develop new inquiries and improve our comprehension of a particular issue. By showing you have examined current data and devised a method to find new applications and make new inferences, you’re showing your peers that you are aware of the direction your field is moving in and confident in your decision to pursue the study contemplated by your paper.

How should we fill that knowledge gap?

• State your purpose/hypothesis clearly . Surprisingly, many people actually forget to do so! If all else fails, a simple “The purpose of this study was to examine/study X” will suffice.
• You are proposing a solution to a problem (the gap) you observed in our current knowledge base. As such,  your Introduction must convince your readers that this problem needs solving .
• In particular, since we are  writing with a particular journal’s readership in mind  (or, at least, you should be!), make sure to address how pertinent your project would be to the reader’s interests.
• In other words,  if we fill this gap, what useful information will the readers gain ? The answer to that question is the promise you are delivering to your readers, and in the conclusion part of your Discussion, you will give final confirmation of your findings and elaborate more on what your readers can now do with the information your project has contributed to the research community.
• DON’T draw any conclusions or include any data from your study . Those aspects belong in other parts of your paper.
• Similarly , DON’T talk about specific techniques in your Introduction  because your readers ought to be familiar with most of them. If you employed a novel technique in your study, and the development of that process is central to your study, then, by all means, include a brief overview.

How to Write the Introduction Section

To round out our guide to drafting the Introduction of your journal article, we provide some general tips about the technical aspects of writing the Introduction section below.

• Use the active voice.
• Be concise.
• Avoid nominalizations (converting phrases, including adjectives and verbs, into nouns). Instead, use the verb form where practical. When you eliminate nominalizations, your sentences will shorten, you’ll maintain an active voice, and your sentences will flow more like natural speech.
• Do you see those uber long sentences in your draft? Revise them. Anything longer than three to four lines is absurd, and even sentences of that length should be rare. Shorter sentences are clearer, making it easier for your readers to follow your arguments. With that said, don’t condense every sentence. Incorporate a variety of sentence structures and lengths.
• Similarly, drop the extended sentences with semicolons and serial clauses connected by commas. Again, the purpose of your paper is to provide a CLEAR explanation of your findings.
• Avoid overusing first-person pronouns. Use them rarely at the beginning of the section and sprinkle them toward the end when you discuss your hypothesis and the rationale behind your study.
• Organize your thoughts from broad to specific (as described in the section “What should I include in the Introduction” above).
• BONUS TIP #1: Like any other type of writing,  start your Introduction with an active hook . Writing a summary of your findings shouldn’t be boring. In fact, a dull start will make your readers stop long before they get to the good stuff—your results and discussion! So how do you make an exciting hook? Think about techniques in creative nonfiction like starting with a provoking anecdote, quote or striking piece of empirical data. You’re telling a story, after all, so make it enjoyable!
• BONUS TIP #2: As one author, reviewer, and editor once stated ,  your Introduction should avoid using phrases like  “novel,” “first ever,” and “paradigm-changing.” Your project might not be paradigm-shifting (few studies truly are); however, if your idea isn’t novel in the first instance, then should you be writing the paper now? If you don’t feel like your research would make a meaningful contribution to current knowledge, then you might want to consider conducting further research before approaching the drafting table.

And keep in mind that receiving English proofreading and paper editing services for your manuscript before submission to journals greatly increases your chances of publication. Wordvice provides high-quality professional editing for all types of academic documents and includes a free certificate of editing .

You can also find these resources plus information about the journal submission process in our FREE downloadable e-book:  Research Writing and Journal Publication E-Book .

Wordvice Resources

• How to Write a Research Paper Introduction 
• Which Verb Tenses to Use in a Research Paper
• How to Write an Abstract for a Research Paper
• How to Write a Research Paper Title
• Useful Phrases for Academic Writing
• Common Transition Terms in Academic Papers
• Active and Passive Voice in Research Papers
• 100+ Verbs That Will Make Your Research Writing Amazing
• Tips for Paraphrasing in R esearch Papers

Additional Resources

•   Guide for Authors.  (Elsevier)
•  How to Write the Results Section of a Research Paper.  (Bates College)
•   Structure of a Research Paper.  (University of Minnesota Biomedical Library)
•   How to Choose a Target Journal  (Springer)
•   How to Write Figures and Tables  (UNC Writing Center)

Orsuamaeze Blessings, Adebayo Alaba Joseph and Oguntimehin Ilemobayo Ifedayo, 2018. Deleterious effects of cadmium solutions on onion (Allium cepa)  growth and the plant’s potential as bioindicator of Cd exposure. Res. J. Environ. Sci., 12: 114-120. Online:  http://docsdrive.com/pdfs/academicjournals/rjes/2018/114-120.pdf

Reference management. Clean and simple.

How to write a good thesis introduction

1. Identify your readership

2. hook the reader and grab their attention, 3. provide relevant background, 4. give the reader a sense of what the paper is about, 5. preview key points and lead into your thesis statement, frequently asked questions about writing a good thesis introduction, related articles.

Many people struggle to write a thesis introduction. Much of your research prep should be done and you should be ready to start your introduction. But often, it’s not clear what needs to be included in a thesis introduction. If you feel stuck at this point not knowing how to start, this guide can help.

Tip: If you’re really struggling to write your thesis intro, consider putting in a placeholder until you write more of the body of your thesis. Then, come back to your intro once you have a stronger sense of the overall content of your thesis.

A good introduction draws readers in while providing the setup for the entire project. There is no single way to write an introduction that will always work for every topic , but the points below can act as a guide. These points can help you write a good thesis introduction.

Before even starting with your first sentence, consider who your readers are. Most likely, your readers will be the professors who are advising you on your thesis.

You should also consider readers of your thesis who are not specialists in your field. Writing with them in your mind will help you to be as clear as possible; this will make your thesis more understandable and enjoyable overall.

Tip: Always strive to be clear, correct, concrete, and concise in your writing.

The first sentence of the thesis is crucial. Looking back at your own research, think about how other writers may have hooked you.

It is common to start with a question or quotation, but these types of hooks are often overused. The best way to start your introduction is with a sentence that is broad and interesting and that seamlessly transitions into your argument.

Once again, consider your audience and how much background information they need to understand your approach. You can start by making a list of what is interesting about your topic:

• Are there any current events or controversies associated with your topic that might be interesting for your introduction?
• What kinds of background information might be useful for a reader to understand right away?
• Are there historical anecdotes or other situations that uniquely illustrate an important aspect of your argument?

A good introduction also needs to contain enough background information to allow the reader to understand the thesis statement and arguments. The amount of background information required will depend on the topic .

There should be enough background information so you don't have to spend too much time with it in the body of the thesis, but not so much that it becomes uninteresting.

Tip: Strike a balance between background information that is too broad or too specific.

Let the reader know what the purpose of the study is. Make sure to include the following points:

• Briefly describe the motivation behind your research.
• Describe the topic and scope of your research.
• Explain the practical relevance of your research.
• Explain the scholarly consensus related to your topic: briefly explain the most important articles and how they are related to your research.

At the end of your introduction, you should lead into your thesis statement by briefly bringing up a few of your main supporting details and by previewing what will be covered in the main part of the thesis. You’ll want to highlight the overall structure of your thesis so that readers will have a sense of what they will encounter as they read.

A good introduction draws readers in while providing the setup for the entire project. There is no single way to write an introduction that will always work for every topic, but these tips will help you write a great introduction:

• Identify your readership.
• Grab the reader's attention.
• Provide relevant background.
• Preview key points and lead into the thesis statement.

A good introduction needs to contain enough background information, and let the reader know what the purpose of the study is. Make sure to include the following points:

• Briefly describe the motivation for your research.

The length of the introduction will depend on the length of the whole thesis. Usually, an introduction makes up roughly 10 per cent of the total word count.

The best way to start your introduction is with a sentence that is broad and interesting and that seamlessly transitions into your argument. Consider the audience, then think of something that would grab their attention.

In Open Access: Theses and Dissertations you can find thousands of recent works. Take a look at any of the theses or dissertations for real-life examples of introductions that were already approved.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation

How to Write a Thesis or Dissertation Introduction

Published on 9 September 2022 by Tegan George and Shona McCombes.

The introduction is the first section of your thesis or dissertation , appearing right after the table of contents . Your introduction draws your reader in, setting the stage for your research with a clear focus, purpose, and direction.

Your introduction should include:

• Your topic, in context: what does your reader need to know to understand your thesis dissertation?
• Your focus and scope: what specific aspect of the topic will you address?
• The relevance of your research: how does your work fit into existing studies on your topic?
• Your questions and objectives: what does your research aim to find out, and how?
• An overview of your structure: what does each section contribute to the overall aim?

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to start your introduction, topic and context, focus and scope, relevance and importance, questions and objectives, overview of the structure, thesis introduction example, introduction checklist, frequently asked questions about introductions.

Although your introduction kicks off your dissertation, it doesn’t have to be the first thing you write – in fact, it’s often one of the very last parts to be completed (just before your abstract ).

It’s a good idea to write a rough draft of your introduction as you begin your research, to help guide you. If you wrote a research proposal , consider using this as a template, as it contains many of the same elements. However, be sure to revise your introduction throughout the writing process, making sure it matches the content of your ensuing sections.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Begin by introducing your research topic and giving any necessary background information. It’s important to contextualise your research and generate interest. Aim to show why your topic is timely or important. You may want to mention a relevant news item, academic debate, or practical problem.

After a brief introduction to your general area of interest, narrow your focus and define the scope of your research.

You can narrow this down in many ways, such as by:

• Geographical area
• Time period
• Demographics or communities
• Themes or aspects of the topic

It’s essential to share your motivation for doing this research, as well as how it relates to existing work on your topic. Further, you should also mention what new insights you expect it will contribute.

Start by giving a brief overview of the current state of research. You should definitely cite the most relevant literature, but remember that you will conduct a more in-depth survey of relevant sources in the literature review section, so there’s no need to go too in-depth in the introduction.

Depending on your field, the importance of your research might focus on its practical application (e.g., in policy or management) or on advancing scholarly understanding of the topic (e.g., by developing theories or adding new empirical data). In many cases, it will do both.

Ultimately, your introduction should explain how your thesis or dissertation:

• Helps solve a practical or theoretical problem
• Addresses a gap in the literature
• Builds on existing research
• Proposes a new understanding of your topic

Prevent plagiarism, run a free check.

Perhaps the most important part of your introduction is your questions and objectives, as it sets up the expectations for the rest of your thesis or dissertation. How you formulate your research questions and research objectives will depend on your discipline, topic, and focus, but you should always clearly state the central aim of your research.

If your research aims to test hypotheses , you can formulate them here. Your introduction is also a good place for a conceptual framework that suggests relationships between variables .

• Conduct surveys to collect data on students’ levels of knowledge, understanding, and positive/negative perceptions of government policy.
• Determine whether attitudes to climate policy are associated with variables such as age, gender, region, and social class.
• Conduct interviews to gain qualitative insights into students’ perspectives and actions in relation to climate policy.

To help guide your reader, end your introduction with an outline  of the structure of the thesis or dissertation to follow. Share a brief summary of each chapter, clearly showing how each contributes to your central aims. However, be careful to keep this overview concise: 1-2 sentences should be enough.

I. Introduction

Human language consists of a set of vowels and consonants which are combined to form words. During the speech production process, thoughts are converted into spoken utterances to convey a message. The appropriate words and their meanings are selected in the mental lexicon (Dell & Burger, 1997). This pre-verbal message is then grammatically coded, during which a syntactic representation of the utterance is built.

Speech, language, and voice disorders affect the vocal cords, nerves, muscles, and brain structures, which result in a distorted language reception or speech production (Sataloff & Hawkshaw, 2014). The symptoms vary from adding superfluous words and taking pauses to hoarseness of the voice, depending on the type of disorder (Dodd, 2005). However, distortions of the speech may also occur as a result of a disease that seems unrelated to speech, such as multiple sclerosis or chronic obstructive pulmonary disease.

This study aims to determine which acoustic parameters are suitable for the automatic detection of exacerbations in patients suffering from chronic obstructive pulmonary disease (COPD) by investigating which aspects of speech differ between COPD patients and healthy speakers and which aspects differ between COPD patients in exacerbation and stable COPD patients.

Checklist: Introduction

I have introduced my research topic in an engaging way.

I have provided necessary context to help the reader understand my topic.

I have clearly specified the focus of my research.

I have shown the relevance and importance of the dissertation topic .

I have clearly stated the problem or question that my research addresses.

I have outlined the specific objectives of the research .

I have provided an overview of the dissertation’s structure .

You've written a strong introduction for your thesis or dissertation. Use the other checklists to continue improving your dissertation.

The introduction of a research paper includes several key elements:

• A hook to catch the reader’s interest
• Relevant background on the topic
• Details of your research problem
• A thesis statement or research question
• Sometimes an outline of the paper

Don’t feel that you have to write the introduction first. The introduction is often one of the last parts of the research paper you’ll write, along with the conclusion.

This is because it can be easier to introduce your paper once you’ve already written the body ; you may not have the clearest idea of your arguments until you’ve written them, and things can change during the writing process .

Research objectives describe what you intend your research project to accomplish.

They summarise the approach and purpose of the project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. & McCombes, S. (2022, September 09). How to Write a Thesis or Dissertation Introduction. Scribbr. Retrieved 14 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/introduction/

Is this article helpful?

Tegan George

Other students also liked, what is a dissertation | 5 essential questions to get started, how to write an abstract | steps & examples, how to write a thesis or dissertation conclusion.

How to write a literature review introduction (+ examples)

The introduction to a literature review serves as your reader’s guide through your academic work and thought process. Explore the significance of literature review introductions in review papers, academic papers, essays, theses, and dissertations. We delve into the purpose and necessity of these introductions, explore the essential components of literature review introductions, and provide step-by-step guidance on how to craft your own, along with examples.

Why you need an introduction for a literature review

When you need an introduction for a literature review, what to include in a literature review introduction, examples of literature review introductions, steps to write your own literature review introduction.

A literature review is a comprehensive examination of the international academic literature concerning a particular topic. It involves summarizing published works, theories, and concepts while also highlighting gaps and offering critical reflections.

In academic writing , the introduction for a literature review is an indispensable component. Effective academic writing requires proper paragraph structuring to guide your reader through your argumentation. This includes providing an introduction to your literature review.

It is imperative to remember that you should never start sharing your findings abruptly. Even if there isn’t a dedicated introduction section .

Instead, you should always offer some form of introduction to orient the reader and clarify what they can expect.

There are three main scenarios in which you need an introduction for a literature review:

• Academic literature review papers: When your literature review constitutes the entirety of an academic review paper, a more substantial introduction is necessary. This introduction should resemble the standard introduction found in regular academic papers.
• Literature review section in an academic paper or essay: While this section tends to be brief, it’s important to precede the detailed literature review with a few introductory sentences. This helps orient the reader before delving into the literature itself.
• Literature review chapter or section in your thesis/dissertation: Every thesis and dissertation includes a literature review component, which also requires a concise introduction to set the stage for the subsequent review.

You may also like: How to write a fantastic thesis introduction (+15 examples)

It is crucial to customize the content and depth of your literature review introduction according to the specific format of your academic work.

In practical terms, this implies, for instance, that the introduction in an academic literature review paper, especially one derived from a systematic literature review , is quite comprehensive. Particularly compared to the rather brief one or two introductory sentences that are often found at the beginning of a literature review section in a standard academic paper. The introduction to the literature review chapter in a thesis or dissertation again adheres to different standards.

Here’s a structured breakdown based on length and the necessary information:

Academic literature review paper

The introduction of an academic literature review paper, which does not rely on empirical data, often necessitates a more extensive introduction than the brief literature review introductions typically found in empirical papers. It should encompass:

• The research problem: Clearly articulate the problem or question that your literature review aims to address.
• The research gap: Highlight the existing gaps, limitations, or unresolved aspects within the current body of literature related to the research problem.
• The research relevance: Explain why the chosen research problem and its subsequent investigation through a literature review are significant and relevant in your academic field.
• The literature review method: If applicable, describe the methodology employed in your literature review, especially if it is a systematic review or follows a specific research framework.
• The main findings or insights of the literature review: Summarize the key discoveries, insights, or trends that have emerged from your comprehensive review of the literature.
• The main argument of the literature review: Conclude the introduction by outlining the primary argument or statement that your literature review will substantiate, linking it to the research problem and relevance you’ve established.
• Preview of the literature review’s structure: Offer a glimpse into the organization of the literature review paper, acting as a guide for the reader. This overview outlines the subsequent sections of the paper and provides an understanding of what to anticipate.

By addressing these elements, your introduction will provide a clear and structured overview of what readers can expect in your literature review paper.

Regular literature review section in an academic article or essay

Most academic articles or essays incorporate regular literature review sections, often placed after the introduction. These sections serve to establish a scholarly basis for the research or discussion within the paper.

In a standard 8000-word journal article, the literature review section typically spans between 750 and 1250 words. The first few sentences or the first paragraph within this section often serve as an introduction. It should encompass:

• An introduction to the topic: When delving into the academic literature on a specific topic, it’s important to provide a smooth transition that aids the reader in comprehending why certain aspects will be discussed within your literature review.
• The core argument: While literature review sections primarily synthesize the work of other scholars, they should consistently connect to your central argument. This central argument serves as the crux of your message or the key takeaway you want your readers to retain. By positioning it at the outset of the literature review section and systematically substantiating it with evidence, you not only enhance reader comprehension but also elevate overall readability. This primary argument can typically be distilled into 1-2 succinct sentences.

In some cases, you might include:

• Methodology: Details about the methodology used, but only if your literature review employed a specialized method. If your approach involved a broader overview without a systematic methodology, you can omit this section, thereby conserving word count.

By addressing these elements, your introduction will effectively integrate your literature review into the broader context of your academic paper or essay. This will, in turn, assist your reader in seamlessly following your overarching line of argumentation.

Introduction to a literature review chapter in thesis or dissertation

The literature review typically constitutes a distinct chapter within a thesis or dissertation. Often, it is Chapter 2 of a thesis or dissertation.

Some students choose to incorporate a brief introductory section at the beginning of each chapter, including the literature review chapter. Alternatively, others opt to seamlessly integrate the introduction into the initial sentences of the literature review itself. Both approaches are acceptable, provided that you incorporate the following elements:

• Purpose of the literature review and its relevance to the thesis/dissertation research: Explain the broader objectives of the literature review within the context of your research and how it contributes to your thesis or dissertation. Essentially, you’re telling the reader why this literature review is important and how it fits into the larger scope of your academic work.
• Primary argument: Succinctly communicate what you aim to prove, explain, or explore through the review of existing literature. This statement helps guide the reader’s understanding of the review’s purpose and what to expect from it.
• Preview of the literature review’s content: Provide a brief overview of the topics or themes that your literature review will cover. It’s like a roadmap for the reader, outlining the main areas of focus within the review. This preview can help the reader anticipate the structure and organization of your literature review.
• Methodology: If your literature review involved a specific research method, such as a systematic review or meta-analysis, you should briefly describe that methodology. However, this is not always necessary, especially if your literature review is more of a narrative synthesis without a distinct research method.

By addressing these elements, your introduction will empower your literature review to play a pivotal role in your thesis or dissertation research. It will accomplish this by integrating your research into the broader academic literature and providing a solid theoretical foundation for your work.

Comprehending the art of crafting your own literature review introduction becomes significantly more accessible when you have concrete examples to examine. Here, you will find several examples that meet, or in most cases, adhere to the criteria described earlier.

Example 1: An effective introduction for an academic literature review paper

To begin, let’s delve into the introduction of an academic literature review paper. We will examine the paper “How does culture influence innovation? A systematic literature review”, which was published in 2018 in the journal Management Decision.

The entire introduction spans 611 words and is divided into five paragraphs. In this introduction, the authors accomplish the following:

• In the first paragraph, the authors introduce the broader topic of the literature review, which focuses on innovation and its significance in the context of economic competition. They underscore the importance of this topic, highlighting its relevance for both researchers and policymakers.
• In the second paragraph, the authors narrow down their focus to emphasize the specific role of culture in relation to innovation.
• In the third paragraph, the authors identify research gaps, noting that existing studies are often fragmented and disconnected. They then emphasize the value of conducting a systematic literature review to enhance our understanding of the topic.
• In the fourth paragraph, the authors introduce their specific objectives and explain how their insights can benefit other researchers and business practitioners.
• In the fifth and final paragraph, the authors provide an overview of the paper’s organization and structure.

In summary, this introduction stands as a solid example. While the authors deviate from previewing their key findings (which is a common practice at least in the social sciences), they do effectively cover all the other previously mentioned points.

Example 2: An effective introduction to a literature review section in an academic paper

The second example represents a typical academic paper, encompassing not only a literature review section but also empirical data, a case study, and other elements. We will closely examine the introduction to the literature review section in the paper “The environmentalism of the subalterns: a case study of environmental activism in Eastern Kurdistan/Rojhelat”, which was published in 2021 in the journal Local Environment.

The paper begins with a general introduction and then proceeds to the literature review, designated by the authors as their conceptual framework. Of particular interest is the first paragraph of this conceptual framework, comprising 142 words across five sentences:

“ A peripheral and marginalised nationality within a multinational though-Persian dominated Iranian society, the Kurdish people of Iranian Kurdistan (a region referred by the Kurds as Rojhelat/Eastern Kurdi-stan) have since the early twentieth century been subject to multifaceted and systematic discriminatory and exclusionary state policy in Iran. This condition has left a population of 12–15 million Kurds in Iran suffering from structural inequalities, disenfranchisement and deprivation. Mismanagement of Kurdistan’s natural resources and the degradation of its natural environmental are among examples of this disenfranchisement. As asserted by Julian Agyeman (2005), structural inequalities that sustain the domination of political and economic elites often simultaneously result in environmental degradation, injustice and discrimination against subaltern communities. This study argues that the environmental struggle in Eastern Kurdistan can be asserted as a (sub)element of the Kurdish liberation movement in Iran. Conceptually this research is inspired by and has been conducted through the lens of ‘subalternity’ ” ( Hassaniyan, 2021, p. 931 ).

In this first paragraph, the author is doing the following:

• The author contextualises the research
• The author links the research focus to the international literature on structural inequalities
• The author clearly presents the argument of the research
• The author clarifies how the research is inspired by and uses the concept of ‘subalternity’.

Thus, the author successfully introduces the literature review, from which point onward it dives into the main concept (‘subalternity’) of the research, and reviews the literature on socio-economic justice and environmental degradation.

While introductions to a literature review section aren’t always required to offer the same level of study context detail as demonstrated here, this introduction serves as a commendable model for orienting the reader within the literature review. It effectively underscores the literature review’s significance within the context of the study being conducted.

Examples 3-5: Effective introductions to literature review chapters

The introduction to a literature review chapter can vary in length, depending largely on the overall length of the literature review chapter itself. For example, a master’s thesis typically features a more concise literature review, thus necessitating a shorter introduction. In contrast, a Ph.D. thesis, with its more extensive literature review, often includes a more detailed introduction.

Numerous universities offer online repositories where you can access theses and dissertations from previous years, serving as valuable sources of reference. Many of these repositories, however, may require you to log in through your university account. Nevertheless, a few open-access repositories are accessible to anyone, such as the one by the University of Manchester . It’s important to note though that copyright restrictions apply to these resources, just as they would with published papers.

Master’s thesis literature review introduction

The first example is “Benchmarking Asymmetrical Heating Models of Spider Pulsar Companions” by P. Sun, a master’s thesis completed at the University of Manchester on January 9, 2024. The author, P. Sun, introduces the literature review chapter very briefly but effectively:

PhD thesis literature review chapter introduction

The second example is Deep Learning on Semi-Structured Data and its Applications to Video-Game AI, Woof, W. (Author). 31 Dec 2020, a PhD thesis completed at the University of Manchester . In Chapter 2, the author offers a comprehensive introduction to the topic in four paragraphs, with the final paragraph serving as an overview of the chapter’s structure:

PhD thesis literature review introduction

The last example is the doctoral thesis Metacognitive strategies and beliefs: Child correlates and early experiences Chan, K. Y. M. (Author). 31 Dec 2020 . The author clearly conducted a systematic literature review, commencing the review section with a discussion of the methodology and approach employed in locating and analyzing the selected records.

Having absorbed all of this information, let’s recap the essential steps and offer a succinct guide on how to proceed with creating your literature review introduction:

• Contextualize your review : Begin by clearly identifying the academic context in which your literature review resides and determining the necessary information to include.
• Outline your structure : Develop a structured outline for your literature review, highlighting the essential information you plan to incorporate in your introduction.
• Literature review process : Conduct a rigorous literature review, reviewing and analyzing relevant sources.
• Summarize and abstract : After completing the review, synthesize the findings and abstract key insights, trends, and knowledge gaps from the literature.
• Craft the introduction : Write your literature review introduction with meticulous attention to the seamless integration of your review into the larger context of your work. Ensure that your introduction effectively elucidates your rationale for the chosen review topics and the underlying reasons guiding your selection.

Master Academia

Get new content delivered directly to your inbox.

Subscribe and receive Master Academia's quarterly newsletter.

The best answers to "What are your plans for the future?"

10 tips for engaging your audience in academic writing, related articles.

10 key skills of successful master’s students

How to write effective cover letters for a paper submission

Dealing with failure as a PhD student

Reject decisions: Sample peer review comments and examples

What’s Included: Introduction Template

This template covers all the core components required in the introduction chapter/section of a typical dissertation or thesis, including:

• The opening section
• Background of the research topic
• Statement of the problem
• Rationale (including the research aims, objectives, and questions)
• Scope of the study
• Significance of the study
• Structure of the document

The purpose of each section is clearly explained, followed by an overview of the key elements that you need to cover. We’ve also included practical examples to help you understand exactly what’s required, along with links to additional free resources (articles, videos, etc.) to help you along your research journey.

The cleanly formatted Google Doc can be downloaded as a fully editable MS Word Document (DOCX format), so you can use it as-is or convert it to LaTeX.

PS – if you’d like a high-level template for the entire thesis, you can we’ve got that too .

Thesis Introduction FAQS

What types of dissertations/theses can this template be used for.

The template follows the standard format for academic research projects, which means it will be suitable for the vast majority of dissertations and theses (especially those within the sciences), whether they are qualitative or quantitative in terms of design.

Keep in mind that the exact requirements for the introduction chapter/section will vary between universities and degree programs. These are typically minor, but it’s always a good idea to double-check your university’s requirements before you finalize your structure.

Is this template for an undergrad, Master or PhD-level thesis?

This template can be used for a dissertation, thesis or research project at any level of study. Doctoral-level projects typically require the introduction chapter to be more extensive/comprehensive, but the structure will typically remain the same.

Can I share this template with my friends/colleagues?

Yes, you’re welcome to share this template in its original format (no editing allowed). If you want to post about it on your blog or social media, we kindly request that you reference this page as your source.

What format is the template (DOC, PDF, PPT, etc.)?

The dissertation introduction chapter template is provided as a Google Doc. You can download it in MS Word format or make a copy to your Google Drive. You’re also welcome to convert it to whatever format works best for you, such as LaTeX or PDF.

What is the core purpose of this chapter?

The introduction chapter of a dissertation or thesis serves to introduce the research topic, clearly state the research problem, and outline the main research questions. It justifies the significance of the study, delineates its scope, and provides a roadmap of the dissertation’s structure.

In a nutshell, the introduction chapter sets the academic tone and context, laying the foundation for the subsequent analysis and discussion.

How long should the introduction chapter be?

This depends on the level of study (undergrad, Master or Doctoral), as well as your university’s specific requirements, so it’s best to check with them. As a general ballpark, introduction chapters for Masters-level projects are usually 1,500 – 2,000 words in length, while Doctoral-level projects can reach multiples of this.

How specific should the research objectives be in the introduction chapter?

In this chapter, your research objectives should be specific enough to clearly define the scope and direction of your study, but broad enough to encompass its overall aims.

Make sure that each objective can be realistically accomplished within the scope of your study and that each objective is directly related to and supports your research question(s).

As a rule of thumb, you should leave in-depth explanations for later chapters; the introduction should just provide a concise overview.

Can I mention the research results in the introduction?

How do i link the introduction to the literature review.

To transition smoothly from the introduction chapter to the literature review chapter in a thesis, it’s a good idea to:

• Conclude the introduction by summarising the main points, such as the research problem, objectives, and significance of your study.
• Explicitly state that the following chapter (literature review) will explore existing research and theoretical frameworks related to your topic.
• Emphasise how the literature review will address gaps or issues identified in the introduction, setting the stage for your research question or hypothesis.
• Use a sentence that acts as a bridge between the two chapters. For example, “To further understand this issue, the next chapter will critically examine the existing literature on [your topic].”

This approach will help form a logical flow and prepare the reader for the depth and context provided in the literature review.

Do you have templates for the other chapters?

Yes, we do. We are constantly developing our collection of free resources to help students complete their dissertations and theses. You can view all of our template resources here .

Can Grad Coach help me with my dissertation/thesis?

Yes, you’re welcome to get in touch with us to discuss our private coaching services .

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

How to Write an Introduction for a Psychology Paper

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Emily is a board-certified science editor who has worked with top digital publishing brands like Voices for Biodiversity, Study.com, GoodTherapy, Vox, and Verywell.

• Writing Tips

If you are writing a psychology paper, it is essential to kick things off with a strong introduction. The introduction to a psychology research paper helps your readers understand why the topic is important and what they need to know before they delve deeper.

Your goal in this section is to introduce the topic to the reader, provide an overview of previous research on the topic, and identify your own hypothesis .

At a Glance

Writing a great introduction can be a great foundation for the rest of your psychology paper. To create a strong intro:

• Research your topic
• Outline your paper
• Introduce your topic
• Summarize the previous research
• Present your hypothesis or main argument

Before You Write an Introduction

There are some important steps you need to take before you even begin writing your introduction. To know what to write, you need to collect important background information and create a detailed plan.

Research Your Topic

Search a journal database, PsychInfo or ERIC, to find articles on your subject. Once you have located an article, look at the reference section to locate other studies cited in the article. As you take notes from these articles, be sure to write down where you found the information.

A simple note detailing the author's name, journal, and date of publication can help you keep track of sources and avoid plagiarism.

Create a Detailed Outline

This is often one of the most boring and onerous steps, so students tend to skip outlining and go straight to writing. Creating an outline might seem tedious, but it can be an enormous time-saver down the road and will make the writing process much easier.

Start by looking over the notes you made during the research process and consider how you want to present all of your ideas and research.

Introduce the Topic

Once you are ready to write your introduction, your first task is to provide a brief description of the research question. What is the experiment or study attempting to demonstrate? What phenomena are you studying? Provide a brief history of your topic and explain how it relates to your current research.

As you are introducing your topic, consider what makes it important. Why should it matter to your reader? The goal of your introduction is not only to let your reader know what your paper is about, but also to justify why it is important for them to learn more.

If your paper tackles a controversial subject and is focused on resolving the issue, it is important to summarize both sides of the controversy in a fair and impartial way. Consider how your paper fits in with the relevant research on the topic.

The introduction of a research paper is designed to grab interest. It should present a compelling look at the research that already exists and explain to readers what questions your own paper will address.

Summarize Previous Research

The second task of your introduction is to provide a well-rounded summary of previous research that is relevant to your topic. So, before you begin to write this summary, it is important to research your topic thoroughly.

Finding appropriate sources amid thousands of journal articles can be a daunting task, but there are several steps you can take to simplify your research. If you have completed the initial steps of researching and keeping detailed notes, writing your introduction will be much easier.

It is essential to give the reader a good overview of the historical context of the issue you are writing about, but do not feel like you must provide an exhaustive review of the subject. Focus on hitting the main points, and try to include the most relevant studies.

You might describe previous research findings and then explain how the current study differs or expands upon earlier research.

Provide Your Hypothesis

Once you have summarized the previous research, explain areas where the research is lacking or potentially flawed. What is missing from previous studies on your topic? What research questions have yet to be answered? Your hypothesis should lead to these questions.

At the end of your introduction, offer your hypothesis and describe what you expected to find in your experiment or study.

The introduction should be relatively brief. You want to give your readers an overview of a topic, explain why you are addressing it, and provide your arguments.

Tips for Writing Your Psychology Paper Intro

• Use 3x5 inch note cards to write down notes and sources.
• Look in professional psychology journals for examples of introductions.
• Remember to cite your sources.
• Maintain a working bibliography with all of the sources you might use in your final paper. This will make it much easier to prepare your reference section later on.
• Use a copy of the APA style manual to ensure that your introduction and references are in proper APA format .

What This Means For You

Before you delve into the main body of your paper, you need to give your readers some background and present your main argument in the introduction of you paper. You can do this by first explaining what your topic is about, summarizing past research, and then providing your thesis.

Armağan A. How to write an introduction section of a scientific article ?  Turk J Urol . 2013;39(Suppl 1):8-9. doi:10.5152/tud.2013.046

Fried T, Foltz C, Lendner M, Vaccaro AR. How to write an effective introduction .  Clin Spine Surg . 2019;32(3):111-112. doi:10.1097/BSD.0000000000000714

Jawaid SA, Jawaid M. How to write introduction and discussion .  Saudi J Anaesth . 2019;13(Suppl 1):S18-S19. doi:10.4103/sja.SJA_584_18

American Psychological Association. Information Recommended for Inclusion in Manuscripts That Report New Data Collections Regardless of Research Design . Published 2020.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

How to Write the Introduction to a Scientific Paper?

• Open Access
• First Online: 24 October 2021

Cite this chapter

You have full access to this open access chapter

• Samiran Nundy 4 ,
• Atul Kakar 5 &
• Zulfiqar A. Bhutta 6  

65k Accesses

142 Altmetric

An Introduction to a scientific paper familiarizes the reader with the background of the issue at hand. It must reflect why the issue is topical and its current importance in the vast sea of research being done globally. It lays the foundation of biomedical writing and is the first portion of an article according to the IMRAD pattern ( I ntroduction, M ethodology, R esults, a nd D iscussion) [1].

I once had a professor tell a class that he sifted through our pile of essays, glancing at the titles and introductions, looking for something that grabbed his attention. Everything else went to the bottom of the pile to be read last, when he was tired and probably grumpy from all the marking. Don’t get put at the bottom of the pile, he said. Anonymous

You have full access to this open access chapter,  Download chapter PDF

Similar content being viewed by others

The Introduction Section

Abstract and Keywords

Writing and publishing a scientific paper

1 what is the importance of an introduction.

An Introduction to a scientific paper familiarizes the reader with the background of the issue at hand. It must reflect why the issue is topical and its current importance in the vast sea of research being done globally. It lays the foundation of biomedical writing and is the first portion of an article according to the IMRAD pattern ( I ntroduction, M ethodology, R esults, a nd D iscussion) [ 1 ].

It provides the flavour of the article and many authors have used phrases to describe it for example—'like a gate of the city’ [ 2 ], ‘the beginning is half of the whole’ [ 3 ], ‘an introduction is not just wrestling with words to fit the facts, but it also strongly modulated by perception of the anticipated reactions of peer colleagues’, [ 4 ] and ‘an introduction is like the trailer to a movie’. A good introduction helps captivate the reader early.

2 What Are the Principles of Writing a Good Introduction?

A good introduction will ‘sell’ an article to a journal editor, reviewer, and finally to a reader [ 3 ]. It should contain the following information [ 5 , 6 ]:

The known—The background scientific data

The unknown—Gaps in the current knowledge

Research hypothesis or question

Methodologies used for the study

The known consist of citations from a review of the literature whereas the unknown is the new work to be undertaken. This part should address how your work is the required missing piece of the puzzle.

3 What Are the Models of Writing an Introduction?

The Problem-solving model

First described by Swales et al. in 1979, in this model the writer should identify the ‘problem’ in the research, address the ‘solution’ and also write about ‘the criteria for evaluating the problem’ [ 7 , 8 ].

The CARS model that stands for C reating A R esearch S pace [ 9 , 10 ].

The two important components of this model are:

Establishing a territory (situation)

Establishing a niche (problem)

Occupying a niche (the solution)

In this popular model, one can add a fourth point, i.e., a conclusion [ 10 ].

4 What Is Establishing a Territory?

This includes: [ 9 ]

Stating the general topic and providing some background about it.

Providing a brief and relevant review of the literature related to the topic.

Adding a paragraph on the scope of the topic including the need for your study.

5 What Is Establishing a Niche?

Establishing a niche includes:

Stating the importance of the problem.

Outlining the current situation regarding the problem citing both global and national data.

Evaluating the current situation (advantages/ disadvantages).

Identifying the gaps.

Emphasizing the importance of the proposed research and how the gaps will be addressed.

Stating the research problem/ questions.

Stating the hypotheses briefly.

Figure 17.1 depicts how the introduction needs to be written. A scientific paper should have an introduction in the form of an inverted pyramid. The writer should start with the general information about the topic and subsequently narrow it down to the specific topic-related introduction.

Flow of ideas from the general to the specific

6 What Does Occupying a Niche Mean?

This is the third portion of the introduction and defines the rationale of the research and states the research question. If this is missing the reviewers will not understand the logic for publication and is a common reason for rejection [ 11 , 12 ]. An example of this is given below:

Till date, no study has been done to see the effectiveness of a mesh alone or the effectiveness of double suturing along with a mesh in the closure of an umbilical hernia regarding the incidence of failure. So, the present study is aimed at comparing the effectiveness of a mesh alone versus the double suturing technique along with a mesh.

7 How Long Should the Introduction Be?

For a project protocol, the introduction should be about 1–2 pages long and for a thesis it should be 3–5 pages in a double-spaced typed setting. For a scientific paper it should be less than 10–15% of the total length of the manuscript [ 13 , 14 ].

8 How Many References Should an Introduction Have?

All sections in a scientific manuscript except the conclusion should contain references. It has been suggested that an introduction should have four or five or at the most one-third of the references in the whole paper [ 15 ].

9 What Are the Important Points Which Should be not Missed in an Introduction?

An introduction paves the way forward for the subsequent sections of the article. Frequently well-planned studies are rejected by journals during review because of the simple reason that the authors failed to clarify the data in this section to justify the study [ 16 , 17 ]. Thus, the existing gap in knowledge should be clearly brought out in this section (Fig. 17.2 ).

How should the abstract, introduction, and discussion look

The following points are important to consider:

The introduction should be written in simple sentences and in the present tense.

Many of the terms will be introduced in this section for the first time and these will require abbreviations to be used later.

The references in this section should be to papers published in quality journals (e.g., having a high impact factor).

The aims, problems, and hypotheses should be clearly mentioned.

Start with a generalization on the topic and go on to specific information relevant to your research.

10 Example of an Introduction

11 Conclusions

An Introduction is a brief account of what the study is about. It should be short, crisp, and complete.

It has to move from a general to a specific research topic and must include the need for the present study.

The Introduction should include data from a literature search, i.e., what is already known about this subject and progress to what we hope to add to this knowledge.

Moore A. What’s in a discussion section? Exploiting 2-dimensionality in the online world. Bioassays. 2016;38(12):1185.

Article   Google Scholar  

Annesley TM. The discussion section: your closing argument. Clin Chem. 2010;56(11):1671–4.

Article   CAS   Google Scholar  

Bavdekar SB. Writing the discussion section: describing the significance of the study findings. J Assoc Physicians India. 2015;63(11):40–2.

PubMed   Google Scholar  

Foote M. The proof of the pudding: how to report results and write a good discussion. Chest. 2009;135(3):866–8.

Kearney MH. The discussion section tells us where we are. Res Nurs Health. 2017;40(4):289–91.

Ghasemi A, Bahadoran Z, Mirmiran P, Hosseinpanah F, Shiva N, Zadeh-Vakili A. The principles of biomedical scientific writing: discussion. Int J Endocrinol Metab. 2019;17(3):e95415.

Swales JM, Feak CB. Academic writing for graduate students: essential tasks and skills. Ann Arbor, MI: University of Michigan Press; 2004.

Google Scholar  

Colombo M, Bucher L, Sprenger J. Determinants of judgments of explanatory power: credibility, generality, and statistical relevance. Front Psychol. 2017;8:1430.

Mozayan MR, Allami H, Fazilatfar AM. Metadiscourse features in medical research articles: subdisciplinary and paradigmatic influences in English and Persian. Res Appl Ling. 2018;9(1):83–104.

Hyland K. Metadiscourse: mapping interactions in academic writing. Nordic J English Stud. 2010;9(2):125.

Hill AB. The environment and disease: association or causation? Proc Royal Soc Med. 2016;58(5):295–300.

Alpert JS. Practicing medicine in Plato’s cave. Am J Med. 2006;119(6):455–6.

Walsh K. Discussing discursive discussions. Med Educ. 2016;50(12):1269–70.

Polit DF, Beck CT. Generalization in quantitative and qualitative research: myths and strategies. Int J Nurs Stud. 2010;47(11):1451–8.

Jawaid SA, Jawaid M. How to write introduction and discussion. Saudi J Anaesth. 2019;13(Suppl 1):S18–9.

Jawaid SA, Baig M. How to write an original article. In: Jawaid SA, Jawaid M, editors. Scientific writing: a guide to the art of medical writing and scientific publishing. Karachi: Published by Med-Print Services; 2018. p. 135–50.

Hall GM, editor. How to write a paper. London: BMJ Books, BMJ Publishing Group; 2003. Structure of a scientific paper. p. 1–5.

Download references

Author information

Authors and affiliations.

Department of Surgical Gastroenterology and Liver Transplantation, Sir Ganga Ram Hospital, New Delhi, India

Samiran Nundy

Department of Internal Medicine, Sir Ganga Ram Hospital, New Delhi, India

Institute for Global Health and Development, The Aga Khan University, South Central Asia, East Africa and United Kingdom, Karachi, Pakistan

Zulfiqar A. Bhutta

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

Reprints and permissions

Copyright information

© 2022 The Author(s)

About this chapter

Nundy, S., Kakar, A., Bhutta, Z.A. (2022). How to Write the Introduction to a Scientific Paper?. In: How to Practice Academic Medicine and Publish from Developing Countries?. Springer, Singapore. https://doi.org/10.1007/978-981-16-5248-6_17

Download citation

DOI : https://doi.org/10.1007/978-981-16-5248-6_17

Published : 24 October 2021

Publisher Name : Springer, Singapore

Print ISBN : 978-981-16-5247-9

Online ISBN : 978-981-16-5248-6

eBook Packages : Medicine Medicine (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Turk J Urol
• v.39(Suppl 1); 2013 Sep

How to write an introduction section of a scientific article?

An article primarily includes the following sections: introduction, materials and methods, results, discussion, and conclusion. Before writing the introduction, the main steps, the heading and the familiarity level of the readers should be considered. Writing should begin when the experimental system and the equipment are available. The introduction section comprises the first portion of the manuscript, and it should be written using the simple present tense. Additionally, abbreviations and explanations are included in this section. The main goal of the introduction is to convey basic information to the readers without obligating them to investigate previous publications and to provide clues as to the results of the present study. To do this, the subject of the article should be thoroughly reviewed, and the aim of the study should be clearly stated immediately after discussing the basic references. In this review, we aim to convey the principles of writing the introduction section of a manuscript to residents and young investigators who have just begun to write a manuscript.

Introduction

When entering a gate of a magnificent city we can make a prediction about the splendor, pomposity, history, and civilization we will encounter in the city. Occasionally, gates do not give even a glimpse of the city, and it can mislead the visitors about inner sections of the city. Introduction sections of the articles are like gates of a city. It is a presentation aiming at introducing itself to the readers, and attracting their attention. Attractiveness, clarity, piquancy, and analytical capacity of the presentation will urge the reader to read the subsequent sections of the article. On the other hand as is understood from the motto of antique Greek poet Euripides “a bad beginning makes a bad ending”, ‘Introduction’ section of a scientific article is important in that it can reveal the conclusion of the article. [ 1 ]

It is useful to analyze the issues to be considered in the ‘Introduction’ section under 3 headings. Firstly, information should be provided about the general topic of the article in the light of the current literature which paves the way for the disclosure of the objective of the manuscript. Then the specific subject matter, and the issue to be focused on should be dealt with, the problem should be brought forth, and fundamental references related to the topic should be discussed. Finally, our recommendations for solution should be described, in other words our aim should be communicated. When these steps are followed in that order, the reader can track the problem, and its solution from his/her own perspective under the light of current literature. Otherwise, even a perfect study presented in a non-systematized, confused design will lose the chance of reading. Indeed inadequate information, inability to clarify the problem, and sometimes concealing the solution will keep the reader who has a desire to attain new information away from reading the manuscript. [ 1 – 3 ]

First of all, explanation of the topic in the light of the current literature should be made in clear, and precise terms as if the reader is completely ignorant of the subject. In this section, establishment of a warm rapport between the reader, and the manuscript is aimed. Since frantic plunging into the problem or the solution will push the reader into the dilemma of either screening the literature about the subject matter or refraining from reading the article. Updated, and robust information should be presented in the ‘Introduction’ section.

Then main topic of our manuscript, and the encountered problem should be analyzed in the light of the current literature following a short instance of brain exercise. At this point the problems should be reduced to one issue as far as possible. Of course, there might be more than one problem, however this new issue, and its solution should be the subject matter of another article. Problems should be expressed clearly. If targets are more numerous, and complex, solutions will be more than one, and confusing.

Finally, the last paragraphs of the ‘Introduction’ section should include the solution in which we will describe the information we generated, and related data. Our sentences which arouse curiosity in the readers should not be left unanswered. The reader who thinks to obtain the most effective information in no time while reading a scientific article should not be smothered with mysterious sentences, and word plays, and the readers should not be left alone to arrive at a conclusion by themselves. If we have contrary expectations, then we might write an article which won’t have any reader. A clearly expressed or recommended solutions to an explicitly revealed problem is also very important for the integrity of the ‘Introduction’ section. [ 1 – 5 ]

We can summarize our arguments with the following example ( Figure 1 ). The introduction section of the exemplary article is written in simple present tense which includes abbreviations, acronyms, and their explanations. Based on our statements above we can divide the introduction section into 3 parts. In the first paragraph, miniaturization, and evolvement of pediatric endourological instruments, and competitions among PNL, ESWL, and URS in the treatment of urinary system stone disease are described, in other words the background is prepared. In the second paragraph, a newly defined system which facilitates intrarenal access in PNL procedure has been described. Besides basic references related to the subject matter have been given, and their outcomes have been indicated. In other words, fundamental references concerning main subject have been discussed. In the last paragraph the aim of the researchers to investigate the outcomes, and safety of the application of this new method in the light of current information has been indicated.

An exemplary introduction section of an article

Apart from the abovementioned information about the introduction section of a scientific article we will summarize a few major issues in brief headings

Important points which one should take heed of:

• Abbreviations should be given following their explanations in the ‘Introduction’ section (their explanations in the summary does not count)
• Simple present tense should be used.
• References should be selected from updated publication with a higher impact factor, and prestigous source books.
• Avoid mysterious, and confounding expressions, construct clear sentences aiming at problematic issues, and their solutions.
• The sentences should be attractive, tempting, and comjprehensible.
• Firstly general, then subject-specific information should be given. Finally our aim should be clearly explained.

HOW TO: Use Articles for Research: Introduction: Hypothesis/Thesis

• What's a Scholarly Journal?
• Reading the Citation
• Authors' Credentials
• Introduction: Hypothesis/Thesis
• Literature Review
• Research Method
• Results/Data
• Discussion/Conclusions

Hypothesis or Thesis

The first few paragraphs of a journal article serve to introduce the topic, to provide the author's hypothesis or thesis, and to indicate why the research was done.  A thesis or hypothesis is not always clearly labled; you may need to read through the introductory paragraphs to determine what the authors are proposing.

• << Previous: Abstract
• Next: Literature Review >>
• Last Updated: Jan 29, 2024 3:35 PM
• URL: https://libguides.cayuga-cc.edu/1ST-PRIORITY/articles

• Manuscript Preparation

Differentiating between the abstract and the introduction of a research paper

• 3 minute read
• 47.3K views

Table of Contents

While writing a manuscript for the first time, you might find yourself confused about the differences between an abstract and the introduction. Both are adjacent sections of a research paper and share certain elements. However, they serve entirely different purposes. So, how does one ensure that these sections are written correctly?

Knowing the intended purpose of the abstract and the introduction is a good start!

What is an abstract?

An abstract is a very short summary of all the sections of your research paper—the introduction, objectives, materials and methods, results, and conclusion. It ends by emphasising the novelty or relevance of your study, or by posing questions for future research. The abstract should cover all important aspects of the study, so that the reader can quickly decide if the paper is of their interest or not.

In simple terms, just like a restaurant’s menu that provides an overview of all available dishes, an abstract gives the reader an idea of what the research paper has to offer. Most journals have a strict word limit for abstracts, which is usually 10% of the research paper.

What is the purpose of an abstract?

The abstract should ideally induce curiosity in the reader’s mind and contain strategic keywords. By generating curiosity and interest, an abstract can push readers to read the entire paper or buy it if it is behind a paywall. By using keywords strategically in the abstract, authors can improve the chances of their paper appearing in online searches.

What is an introduction?

The introduction is the first section in a research paper after the abstract, which describes in detail the background information that is necessary for the reader to understand the topic and aim of the study.

What is the purpose of an introduction?

The introduction points to specific gaps in knowledge and explains how the study addresses these gaps. It lists previous studies in a chronological order, complete with citations, to explain why the study was warranted.

A good introduction sets the context for your study and clearly distinguishes between the knowns and the unknowns in a research topic.

Often, the introduction mentions the materials and methods used in a study and outlines the hypotheses tested. Both the abstract and the introduction have this in common. So, what are the key differences between the two sections?

Key differences between an abstract and the introduction:

• The word limit for an abstract is usually 250 words or less. In contrast, the typical word limit for an introduction is 500 words or more.
• When writing the abstract, it is essential to use keywords to make the paper more visible to search engines. This is not a significant concern when writing the introduction.
• The abstract features a summary of the results and conclusions of your study, while the introduction does not. The abstract, unlike the introduction, may also suggest future directions for research.
• While a short review of previous research features in both the abstract and the introduction, it is more elaborate in the latter.
• All references to previous research in the introduction come with citations. The abstract does not mention specific studies, although it may briefly outline previous research.
• The abstract always comes before the introduction in a research paper.
• Every paper does not need an abstract. However, an introduction is an essential component of all research papers.

If you are still confused about how to write the abstract and the introduction of your research paper while accounting for the differences between them, head over to Elsevier Author Services . Our experts will be happy to guide you throughout your research journey, with useful advice on how to write high quality research papers and get them published in reputed journals!

• Research Process

Scholarly Sources: What are They and Where can You Find Them?

What are Implications in Research?

You may also like.

Make Hook, Line, and Sinker: The Art of Crafting Engaging Introductions

Can Describing Study Limitations Improve the Quality of Your Paper?

A Guide to Crafting Shorter, Impactful Sentences in Academic Writing

6 Steps to Write an Excellent Discussion in Your Manuscript

How to Write Clear and Crisp Civil Engineering Papers? Here are 5 Key Tips to Consider

The Clear Path to An Impactful Paper: ②

The Essentials of Writing to Communicate Research in Medicine

Changing Lines: Sentence Patterns in Academic Writing

Input your search keywords and press Enter.