example of methods section in dissertation

• Privacy Policy

Home » Dissertation Methodology – Structure, Example and Writing Guide

Dissertation Methodology – Structure, Example and Writing Guide

• Table of Contents

Dissertation Methodology

In any research, the methodology chapter is one of the key components of your dissertation. It provides a detailed description of the methods you used to conduct your research and helps readers understand how you obtained your data and how you plan to analyze it. This section is crucial for replicating the study and validating its results.

Here are the basic elements that are typically included in a dissertation methodology:

• Introduction : This section should explain the importance and goals of your research .
• Research Design : Outline your research approach and why it’s appropriate for your study. You might be conducting an experimental research, a qualitative research, a quantitative research, or a mixed-methods research.
• Data Collection : This section should detail the methods you used to collect your data. Did you use surveys, interviews, observations, etc.? Why did you choose these methods? You should also include who your participants were, how you recruited them, and any ethical considerations.
• Data Analysis : Explain how you intend to analyze the data you collected. This could include statistical analysis, thematic analysis, content analysis, etc., depending on the nature of your study.
• Reliability and Validity : Discuss how you’ve ensured the reliability and validity of your study. For instance, you could discuss measures taken to reduce bias, how you ensured that your measures accurately capture what they were intended to, or how you will handle any limitations in your study.
• Ethical Considerations : This is where you state how you have considered ethical issues related to your research, how you have protected the participants’ rights, and how you have complied with the relevant ethical guidelines.
• Limitations : Acknowledge any limitations of your methodology, including any biases and constraints that might have affected your study.
• Summary : Recap the key points of your methodology chapter, highlighting the overall approach and rationalization of your research.

Types of Dissertation Methodology

The type of methodology you choose for your dissertation will depend on the nature of your research question and the field you’re working in. Here are some of the most common types of methodologies used in dissertations:

Experimental Research

This involves creating an experiment that will test your hypothesis. You’ll need to design an experiment, manipulate variables, collect data, and analyze that data to draw conclusions. This is commonly used in fields like psychology, biology, and physics.

Survey Research

This type of research involves gathering data from a large number of participants using tools like questionnaires or surveys. It can be used to collect a large amount of data and is often used in fields like sociology, marketing, and public health.

Qualitative Research

This type of research is used to explore complex phenomena that can’t be easily quantified. Methods include interviews, focus groups, and observations. This methodology is common in fields like anthropology, sociology, and education.

Quantitative Research

Quantitative research uses numerical data to answer research questions. This can include statistical, mathematical, or computational techniques. It’s common in fields like economics, psychology, and health sciences.

Case Study Research

This type of research involves in-depth investigation of a particular case, such as an individual, group, or event. This methodology is often used in psychology, social sciences, and business.

Mixed Methods Research

This combines qualitative and quantitative research methods in a single study. It’s used to answer more complex research questions and is becoming more popular in fields like social sciences, health sciences, and education.

Action Research

This type of research involves taking action and then reflecting upon the results. This cycle of action-reflection-action continues throughout the study. It’s often used in fields like education and organizational development.

Longitudinal Research

This type of research involves studying the same group of individuals over an extended period of time. This could involve surveys, observations, or experiments. It’s common in fields like psychology, sociology, and medicine.

Ethnographic Research

This type of research involves the in-depth study of people and cultures. Researchers immerse themselves in the culture they’re studying to collect data. This is often used in fields like anthropology and social sciences.

Structure of Dissertation Methodology

The structure of a dissertation methodology can vary depending on your field of study, the nature of your research, and the guidelines of your institution. However, a standard structure typically includes the following elements:

• Introduction : Briefly introduce your overall approach to the research. Explain what you plan to explore and why it’s important.
• Research Design/Approach : Describe your overall research design. This can be qualitative, quantitative, or mixed methods. Explain the rationale behind your chosen design and why it is suitable for your research questions or hypotheses.
• Data Collection Methods : Detail the methods you used to collect your data. You should include what type of data you collected, how you collected it, and why you chose this method. If relevant, you can also include information about your sample population, such as how many people participated, how they were chosen, and any relevant demographic information.
• Data Analysis Methods : Explain how you plan to analyze your collected data. This will depend on the nature of your data. For example, if you collected quantitative data, you might discuss statistical analysis techniques. If you collected qualitative data, you might discuss coding strategies, thematic analysis, or narrative analysis.
• Reliability and Validity : Discuss how you’ve ensured the reliability and validity of your research. This might include steps you took to reduce bias or increase the accuracy of your measurements.
• Ethical Considerations : If relevant, discuss any ethical issues associated with your research. This might include how you obtained informed consent from participants, how you ensured participants’ privacy and confidentiality, or any potential conflicts of interest.
• Limitations : Acknowledge any limitations in your research methodology. This could include potential sources of bias, difficulties with data collection, or limitations in your analysis methods.
• Summary/Conclusion : Briefly summarize the key points of your methodology, emphasizing how it helps answer your research questions or hypotheses.

How to Write Dissertation Methodology

Writing a dissertation methodology requires you to be clear and precise about the way you’ve carried out your research. It’s an opportunity to convince your readers of the appropriateness and reliability of your approach to your research question. Here is a basic guideline on how to write your methodology section:

1. Introduction

Start your methodology section by restating your research question(s) or objective(s). This ensures your methodology directly ties into the aim of your research.

2. Approach

Identify your overall approach: qualitative, quantitative, or mixed methods. Explain why you have chosen this approach.

• Qualitative methods are typically used for exploratory research and involve collecting non-numerical data. This might involve interviews, observations, or analysis of texts.
• Quantitative methods are used for research that relies on numerical data. This might involve surveys, experiments, or statistical analysis.
• Mixed methods use a combination of both qualitative and quantitative research methods.

3. Research Design

Describe the overall design of your research. This could involve explaining the type of study (e.g., case study, ethnography, experimental research, etc.), how you’ve defined and measured your variables, and any control measures you’ve implemented.

4. Data Collection

Explain in detail how you collected your data.

• If you’ve used qualitative methods, you might detail how you selected participants for interviews or focus groups, how you conducted observations, or how you analyzed existing texts.
• If you’ve used quantitative methods, you might detail how you designed your survey or experiment, how you collected responses, and how you ensured your data is reliable and valid.

5. Data Analysis

Describe how you analyzed your data.

• If you’re doing qualitative research, this might involve thematic analysis, discourse analysis, or grounded theory.
• If you’re doing quantitative research, you might be conducting statistical tests, regression analysis, or factor analysis.

Discuss any ethical issues related to your research. This might involve explaining how you obtained informed consent, how you’re protecting participants’ privacy, or how you’re managing any potential harms to participants.

7. Reliability and Validity

Discuss the steps you’ve taken to ensure the reliability and validity of your data.

• Reliability refers to the consistency of your measurements, and you might discuss how you’ve piloted your instruments or used standardized measures.
• Validity refers to the accuracy of your measurements, and you might discuss how you’ve ensured your measures reflect the concepts they’re supposed to measure.

8. Limitations

Every study has its limitations. Discuss the potential weaknesses of your chosen methods and explain any obstacles you faced in your research.

9. Conclusion

Summarize the key points of your methodology, emphasizing how it helps to address your research question or objective.

Example of Dissertation Methodology

An Example of Dissertation Methodology is as follows:

Chapter 3: Methodology

• Introduction

This chapter details the methodology adopted in this research. The study aimed to explore the relationship between stress and productivity in the workplace. A mixed-methods research design was used to collect and analyze data.

Research Design

This study adopted a mixed-methods approach, combining quantitative surveys with qualitative interviews to provide a comprehensive understanding of the research problem. The rationale for this approach is that while quantitative data can provide a broad overview of the relationships between variables, qualitative data can provide deeper insights into the nuances of these relationships.

Data Collection Methods

Quantitative Data Collection : An online self-report questionnaire was used to collect data from participants. The questionnaire consisted of two standardized scales: the Perceived Stress Scale (PSS) to measure stress levels and the Individual Work Productivity Questionnaire (IWPQ) to measure productivity. The sample consisted of 200 office workers randomly selected from various companies in the city.

Qualitative Data Collection : Semi-structured interviews were conducted with 20 participants chosen from the initial sample. The interview guide included questions about participants’ experiences with stress and how they perceived its impact on their productivity.

Data Analysis Methods

Quantitative Data Analysis : Descriptive and inferential statistics were used to analyze the survey data. Pearson’s correlation was used to examine the relationship between stress and productivity.

Qualitative Data Analysis : Interviews were transcribed and subjected to thematic analysis using NVivo software. This process allowed for identifying and analyzing patterns and themes regarding the impact of stress on productivity.

Reliability and Validity

To ensure reliability and validity, standardized measures with good psychometric properties were used. In qualitative data analysis, triangulation was employed by having two researchers independently analyze the data and then compare findings.

Ethical Considerations

All participants provided informed consent prior to their involvement in the study. They were informed about the purpose of the study, their rights as participants, and the confidentiality of their responses.

Limitations

The main limitation of this study is its reliance on self-report measures, which can be subject to biases such as social desirability bias. Moreover, the sample was drawn from a single city, which may limit the generalizability of the findings.

Where to Write Dissertation Methodology

In a dissertation or thesis, the Methodology section usually follows the Literature Review. This placement allows the Methodology to build upon the theoretical framework and existing research outlined in the Literature Review, and precedes the Results or Findings section. Here’s a basic outline of how most dissertations are structured:

• Acknowledgements
• Literature Review (or it may be interspersed throughout the dissertation)
• Methodology
• Results/Findings
• References/Bibliography

In the Methodology chapter, you will discuss the research design, data collection methods, data analysis methods, and any ethical considerations pertaining to your study. This allows your readers to understand how your research was conducted and how you arrived at your results.

Advantages of Dissertation Methodology

The dissertation methodology section plays an important role in a dissertation for several reasons. Here are some of the advantages of having a well-crafted methodology section in your dissertation:

• Clarifies Your Research Approach : The methodology section explains how you plan to tackle your research question, providing a clear plan for data collection and analysis.
• Enables Replication : A detailed methodology allows other researchers to replicate your study. Replication is an important aspect of scientific research because it provides validation of the study’s results.
• Demonstrates Rigor : A well-written methodology shows that you’ve thought critically about your research methods and have chosen the most appropriate ones for your research question. This adds credibility to your study.
• Enhances Transparency : Detailing your methods allows readers to understand the steps you took in your research. This increases the transparency of your study and allows readers to evaluate potential biases or limitations.
• Helps in Addressing Research Limitations : In your methodology section, you can acknowledge and explain the limitations of your research. This is important as it shows you understand that no research method is perfect and there are always potential weaknesses.
• Facilitates Peer Review : A detailed methodology helps peer reviewers assess the soundness of your research design. This is an important part of the publication process if you aim to publish your dissertation in a peer-reviewed journal.
• Establishes the Validity and Reliability : Your methodology section should also include a discussion of the steps you took to ensure the validity and reliability of your measurements, which is crucial for establishing the overall quality of your research.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Dissertation vs Thesis – Key Differences

Research Contribution – Thesis Guide

Table of Contents – Types, Formats, Examples

Informed Consent in Research – Types, Templates...

Thesis Statement – Examples, Writing Guide

Thesis Outline – Example, Template and Writing...

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• What Is a Research Methodology? | Steps & Tips

What Is a Research Methodology? | Steps & Tips

Published on 25 February 2019 by Shona McCombes . Revised on 10 October 2022.

Your research methodology discusses and explains the data collection and analysis methods you used in your research. A key part of your thesis, dissertation, or research paper, the methodology chapter explains what you did and how you did it, allowing readers to evaluate the reliability and validity of your research.

It should include:

• The type of research you conducted
• How you collected and analysed your data
• Any tools or materials you used in the research
• Why you chose these methods
• Your methodology section should generally be written in the past tense .
• Academic style guides in your field may provide detailed guidelines on what to include for different types of studies.
• Your citation style might provide guidelines for your methodology section (e.g., an APA Style methods section ).

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to write a research methodology, why is a methods section important, step 1: explain your methodological approach, step 2: describe your data collection methods, step 3: describe your analysis method, step 4: evaluate and justify the methodological choices you made, tips for writing a strong methodology chapter, frequently asked questions about methodology.

Prevent plagiarism, run a free check.

Your methods section is your opportunity to share how you conducted your research and why you chose the methods you chose. It’s also the place to show that your research was rigorously conducted and can be replicated .

It gives your research legitimacy and situates it within your field, and also gives your readers a place to refer to if they have any questions or critiques in other sections.

You can start by introducing your overall approach to your research. You have two options here.

Option 1: Start with your “what”

What research problem or question did you investigate?

• Aim to describe the characteristics of something?
• Explore an under-researched topic?
• Establish a causal relationship?

And what type of data did you need to achieve this aim?

• Quantitative data , qualitative data , or a mix of both?
• Primary data collected yourself, or secondary data collected by someone else?
• Experimental data gathered by controlling and manipulating variables, or descriptive data gathered via observations?

Option 2: Start with your “why”

Depending on your discipline, you can also start with a discussion of the rationale and assumptions underpinning your methodology. In other words, why did you choose these methods for your study?

• Why is this the best way to answer your research question?
• Is this a standard methodology in your field, or does it require justification?
• Were there any ethical considerations involved in your choices?
• What are the criteria for validity and reliability in this type of research ?

Once you have introduced your reader to your methodological approach, you should share full details about your data collection methods .

Quantitative methods

In order to be considered generalisable, you should describe quantitative research methods in enough detail for another researcher to replicate your study.

Here, explain how you operationalised your concepts and measured your variables. Discuss your sampling method or inclusion/exclusion criteria, as well as any tools, procedures, and materials you used to gather your data.

Surveys Describe where, when, and how the survey was conducted.

• How did you design the questionnaire?
• What form did your questions take (e.g., multiple choice, Likert scale )?
• Were your surveys conducted in-person or virtually?
• What sampling method did you use to select participants?
• What was your sample size and response rate?

Experiments Share full details of the tools, techniques, and procedures you used to conduct your experiment.

• How did you design the experiment ?
• How did you recruit participants?
• How did you manipulate and measure the variables ?
• What tools did you use?

Existing data Explain how you gathered and selected the material (such as datasets or archival data) that you used in your analysis.

• Where did you source the material?
• How was the data originally produced?
• What criteria did you use to select material (e.g., date range)?

The survey consisted of 5 multiple-choice questions and 10 questions measured on a 7-point Likert scale.

The goal was to collect survey responses from 350 customers visiting the fitness apparel company’s brick-and-mortar location in Boston on 4–8 July 2022, between 11:00 and 15:00.

Here, a customer was defined as a person who had purchased a product from the company on the day they took the survey. Participants were given 5 minutes to fill in the survey anonymously. In total, 408 customers responded, but not all surveys were fully completed. Due to this, 371 survey results were included in the analysis.

Qualitative methods

In qualitative research , methods are often more flexible and subjective. For this reason, it’s crucial to robustly explain the methodology choices you made.

Be sure to discuss the criteria you used to select your data, the context in which your research was conducted, and the role you played in collecting your data (e.g., were you an active participant, or a passive observer?)

Interviews or focus groups Describe where, when, and how the interviews were conducted.

• How did you find and select participants?
• How many participants took part?
• What form did the interviews take ( structured , semi-structured , or unstructured )?
• How long were the interviews?
• How were they recorded?

Participant observation Describe where, when, and how you conducted the observation or ethnography .

• What group or community did you observe? How long did you spend there?
• How did you gain access to this group? What role did you play in the community?
• How long did you spend conducting the research? Where was it located?
• How did you record your data (e.g., audiovisual recordings, note-taking)?

Existing data Explain how you selected case study materials for your analysis.

• What type of materials did you analyse?
• How did you select them?

In order to gain better insight into possibilities for future improvement of the fitness shop’s product range, semi-structured interviews were conducted with 8 returning customers.

Here, a returning customer was defined as someone who usually bought products at least twice a week from the store.

Surveys were used to select participants. Interviews were conducted in a small office next to the cash register and lasted approximately 20 minutes each. Answers were recorded by note-taking, and seven interviews were also filmed with consent. One interviewee preferred not to be filmed.

Mixed methods

Mixed methods research combines quantitative and qualitative approaches. If a standalone quantitative or qualitative study is insufficient to answer your research question, mixed methods may be a good fit for you.

Mixed methods are less common than standalone analyses, largely because they require a great deal of effort to pull off successfully. If you choose to pursue mixed methods, it’s especially important to robustly justify your methods here.

Next, you should indicate how you processed and analysed your data. Avoid going into too much detail: you should not start introducing or discussing any of your results at this stage.

In quantitative research , your analysis will be based on numbers. In your methods section, you can include:

• How you prepared the data before analysing it (e.g., checking for missing data , removing outliers , transforming variables)
• Which software you used (e.g., SPSS, Stata or R)
• Which statistical tests you used (e.g., two-tailed t test , simple linear regression )

In qualitative research, your analysis will be based on language, images, and observations (often involving some form of textual analysis ).

Specific methods might include:

• Content analysis : Categorising and discussing the meaning of words, phrases and sentences
• Thematic analysis : Coding and closely examining the data to identify broad themes and patterns
• Discourse analysis : Studying communication and meaning in relation to their social context

Mixed methods combine the above two research methods, integrating both qualitative and quantitative approaches into one coherent analytical process.

Above all, your methodology section should clearly make the case for why you chose the methods you did. This is especially true if you did not take the most standard approach to your topic. In this case, discuss why other methods were not suitable for your objectives, and show how this approach contributes new knowledge or understanding.

In any case, it should be overwhelmingly clear to your reader that you set yourself up for success in terms of your methodology’s design. Show how your methods should lead to results that are valid and reliable, while leaving the analysis of the meaning, importance, and relevance of your results for your discussion section .

• Quantitative: Lab-based experiments cannot always accurately simulate real-life situations and behaviours, but they are effective for testing causal relationships between variables .
• Qualitative: Unstructured interviews usually produce results that cannot be generalised beyond the sample group , but they provide a more in-depth understanding of participants’ perceptions, motivations, and emotions.
• Mixed methods: Despite issues systematically comparing differing types of data, a solely quantitative study would not sufficiently incorporate the lived experience of each participant, while a solely qualitative study would be insufficiently generalisable.

Remember that your aim is not just to describe your methods, but to show how and why you applied them. Again, it’s critical to demonstrate that your research was rigorously conducted and can be replicated.

1. Focus on your objectives and research questions

The methodology section should clearly show why your methods suit your objectives  and convince the reader that you chose the best possible approach to answering your problem statement and research questions .

2. Cite relevant sources

Your methodology can be strengthened by referencing existing research in your field. This can help you to:

• Show that you followed established practice for your type of research
• Discuss how you decided on your approach by evaluating existing research
• Present a novel methodological approach to address a gap in the literature

3. Write for your audience

Consider how much information you need to give, and avoid getting too lengthy. If you are using methods that are standard for your discipline, you probably don’t need to give a lot of background or justification.

Regardless, your methodology should be a clear, well-structured text that makes an argument for your approach, not just a list of technical details and procedures.

Methodology refers to the overarching strategy and rationale of your research. Developing your methodology involves studying the research methods used in your field and the theories or principles that underpin them, in order to choose the approach that best matches your objectives.

Methods are the specific tools and procedures you use to collect and analyse data (e.g. interviews, experiments , surveys , statistical tests ).

In a dissertation or scientific paper, the methodology chapter or methods section comes after the introduction and before the results , discussion and conclusion .

Depending on the length and type of document, you might also include a literature review or theoretical framework before the methodology.

Quantitative research deals with numbers and statistics, while qualitative research deals with words and meanings.

Quantitative methods allow you to test a hypothesis by systematically collecting and analysing data, while qualitative methods allow you to explore ideas and experiences in depth.

A sample is a subset of individuals from a larger population. Sampling means selecting the group that you will actually collect data from in your research.

For example, if you are researching the opinions of students in your university, you could survey a sample of 100 students.

Statistical sampling allows you to test a hypothesis about the characteristics of a population. There are various sampling methods you can use to ensure that your sample is representative of the population as a whole.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). What Is a Research Methodology? | Steps & Tips. Scribbr. Retrieved 2 July 2024, from https://www.scribbr.co.uk/thesis-dissertation/methodology/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a dissertation proposal | a step-by-step guide, what is a literature review | guide, template, & examples, what is a theoretical framework | a step-by-step guide.

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

How to Write a Methods Section for a Psychology Paper

Tips and Examples of an APA Methods Section

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Emily is a board-certified science editor who has worked with top digital publishing brands like Voices for Biodiversity, Study.com, GoodTherapy, Vox, and Verywell.

Verywell / Brianna Gilmartin 

The methods section of an APA format psychology paper provides the methods and procedures used in a research study or experiment . This part of an APA paper is critical because it allows other researchers to see exactly how you conducted your research.

Method refers to the procedure that was used in a research study. It included a precise description of how the experiments were performed and why particular procedures were selected. While the APA technically refers to this section as the 'method section,' it is also often known as a 'methods section.'

The methods section ensures the experiment's reproducibility and the assessment of alternative methods that might produce different results. It also allows researchers to replicate the experiment and judge the study's validity.

This article discusses how to write a methods section for a psychology paper, including important elements to include and tips that can help.

What to Include in a Method Section

So what exactly do you need to include when writing your method section? You should provide detailed information on the following:

• Research design
• Participants
• Participant behavior

The method section should provide enough information to allow other researchers to replicate your experiment or study.

Components of a Method Section

The method section should utilize subheadings to divide up different subsections. These subsections typically include participants, materials, design, and procedure.

Participants 

In this part of the method section, you should describe the participants in your experiment, including who they were (and any unique features that set them apart from the general population), how many there were, and how they were selected. If you utilized random selection to choose your participants, it should be noted here.

For example: "We randomly selected 100 children from elementary schools near the University of Arizona."

At the very minimum, this part of your method section must convey:

• Basic demographic characteristics of your participants (such as sex, age, ethnicity, or religion)
• The population from which your participants were drawn
• Any restrictions on your pool of participants
• How many participants were assigned to each condition and how they were assigned to each group (i.e., randomly assignment , another selection method, etc.)
• Why participants took part in your research (i.e., the study was advertised at a college or hospital, they received some type of incentive, etc.)

Information about participants helps other researchers understand how your study was performed, how generalizable the result might be, and allows other researchers to replicate the experiment with other populations to see if they might obtain the same results.

In this part of the method section, you should describe the materials, measures, equipment, or stimuli used in the experiment. This may include:

• Testing instruments
• Technical equipment
• Any psychological assessments that were used
• Any special equipment that was used

For example: "Two stories from Sullivan et al.'s (1994) second-order false belief attribution tasks were used to assess children's understanding of second-order beliefs."

For standard equipment such as computers, televisions, and videos, you can simply name the device and not provide further explanation.

Specialized equipment should be given greater detail, especially if it is complex or created for a niche purpose. In some instances, such as if you created a special material or apparatus for your study, you might need to include an illustration of the item in the appendix of your paper.

In this part of your method section, describe the type of design used in the experiment. Specify the variables as well as the levels of these variables. Identify:

• The independent variables
• Dependent variables
• Control variables
• Any extraneous variables that might influence your results.

Also, explain whether your experiment uses a  within-groups  or between-groups design.

For example: "The experiment used a 3x2 between-subjects design. The independent variables were age and understanding of second-order beliefs."

The next part of your method section should detail the procedures used in your experiment. Your procedures should explain:

• What the participants did
• How data was collected
• The order in which steps occurred

For example: "An examiner interviewed children individually at their school in one session that lasted 20 minutes on average. The examiner explained to each child that he or she would be told two short stories and that some questions would be asked after each story. All sessions were videotaped so the data could later be coded."

Keep this subsection concise yet detailed. Explain what you did and how you did it, but do not overwhelm your readers with too much information.

Tips for How to Write a Methods Section

In addition to following the basic structure of an APA method section, there are also certain things you should remember when writing this section of your paper. Consider the following tips when writing this section:

• Use the past tense : Always write the method section in the past tense.
• Be descriptive : Provide enough detail that another researcher could replicate your experiment, but focus on brevity. Avoid unnecessary detail that is not relevant to the outcome of the experiment.
• Use an academic tone : Use formal language and avoid slang or colloquial expressions. Word choice is also important. Refer to the people in your experiment or study as "participants" rather than "subjects."
• Use APA format : Keep a style guide on hand as you write your method section. The Publication Manual of the American Psychological Association is the official source for APA style.
• Make connections : Read through each section of your paper for agreement with other sections. If you mention procedures in the method section, these elements should be discussed in the results and discussion sections.
• Proofread : Check your paper for grammar, spelling, and punctuation errors.. typos, grammar problems, and spelling errors. Although a spell checker is a handy tool, there are some errors only you can catch.

After writing a draft of your method section, be sure to get a second opinion. You can often become too close to your work to see errors or lack of clarity. Take a rough draft of your method section to your university's writing lab for additional assistance.

A Word From Verywell

The method section is one of the most important components of your APA format paper. The goal of your paper should be to clearly detail what you did in your experiment. Provide enough detail that another researcher could replicate your study if they wanted.

Finally, if you are writing your paper for a class or for a specific publication, be sure to keep in mind any specific instructions provided by your instructor or by the journal editor. Your instructor may have certain requirements that you need to follow while writing your method section.

Frequently Asked Questions

While the subsections can vary, the three components that should be included are sections on the participants, the materials, and the procedures.

• Describe who the participants were in the study and how they were selected.
• Define and describe the materials that were used including any equipment, tests, or assessments
• Describe how the data was collected

To write your methods section in APA format, describe your participants, materials, study design, and procedures. Keep this section succinct, and always write in the past tense. The main heading of this section should be labeled "Method" and it should be centered, bolded, and capitalized. Each subheading within this section should be bolded, left-aligned and in title case.

The purpose of the methods section is to describe what you did in your experiment. It should be brief, but include enough detail that someone could replicate your experiment based on this information. Your methods section should detail what you did to answer your research question. Describe how the study was conducted, the study design that was used and why it was chosen, and how you collected the data and analyzed the results.

Erdemir F. How to write a materials and methods section of a scientific article ? Turk J Urol . 2013;39(Suppl 1):10-5. doi:10.5152/tud.2013.047

Kallet RH. How to write the methods section of a research paper . Respir Care . 2004;49(10):1229-32. PMID: 15447808.

American Psychological Association.  Publication Manual of the American Psychological Association  (7th ed.). Washington DC: The American Psychological Association; 2019.

American Psychological Association. APA Style Journal Article Reporting Standards . Published 2020.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

When you choose to publish with PLOS, your research makes an impact. Make your work accessible to all, without restrictions, and accelerate scientific discovery with options like preprints and published peer review that make your work more Open.

• PLOS Biology
• PLOS Climate
• PLOS Complex Systems
• PLOS Computational Biology
• PLOS Digital Health
• PLOS Genetics
• PLOS Global Public Health
• PLOS Medicine
• PLOS Mental Health
• PLOS Neglected Tropical Diseases
• PLOS Pathogens
• PLOS Sustainability and Transformation
• PLOS Collections
• How to Write Your Methods

Ensure understanding, reproducibility and replicability

What should you include in your methods section, and how much detail is appropriate?

Why Methods Matter

The methods section was once the most likely part of a paper to be unfairly abbreviated, overly summarized, or even relegated to hard-to-find sections of a publisher’s website. While some journals may responsibly include more detailed elements of methods in supplementary sections, the movement for increased reproducibility and rigor in science has reinstated the importance of the methods section. Methods are now viewed as a key element in establishing the credibility of the research being reported, alongside the open availability of data and results.

A clear methods section impacts editorial evaluation and readers’ understanding, and is also the backbone of transparency and replicability.

For example, the Reproducibility Project: Cancer Biology project set out in 2013 to replicate experiments from 50 high profile cancer papers, but revised their target to 18 papers once they understood how much methodological detail was not contained in the original papers.

What to include in your methods section

What you include in your methods sections depends on what field you are in and what experiments you are performing. However, the general principle in place at the majority of journals is summarized well by the guidelines at PLOS ONE : “The Materials and Methods section should provide enough detail to allow suitably skilled investigators to fully replicate your study. ” The emphases here are deliberate: the methods should enable readers to understand your paper, and replicate your study. However, there is no need to go into the level of detail that a lay-person would require—the focus is on the reader who is also trained in your field, with the suitable skills and knowledge to attempt a replication.

A constant principle of rigorous science

A methods section that enables other researchers to understand and replicate your results is a constant principle of rigorous, transparent, and Open Science. Aim to be thorough, even if a particular journal doesn’t require the same level of detail . Reproducibility is all of our responsibility. You cannot create any problems by exceeding a minimum standard of information. If a journal still has word-limits—either for the overall article or specific sections—and requires some methodological details to be in a supplemental section, that is OK as long as the extra details are searchable and findable .

Imagine replicating your own work, years in the future

As part of PLOS’ presentation on Reproducibility and Open Publishing (part of UCSF’s Reproducibility Series ) we recommend planning the level of detail in your methods section by imagining you are writing for your future self, replicating your own work. When you consider that you might be at a different institution, with different account logins, applications, resources, and access levels—you can help yourself imagine the level of specificity that you yourself would require to redo the exact experiment. Consider:

• Which details would you need to be reminded of? 
• Which cell line, or antibody, or software, or reagent did you use, and does it have a Research Resource ID (RRID) that you can cite?
• Which version of a questionnaire did you use in your survey? 
• Exactly which visual stimulus did you show participants, and is it publicly available? 
• What participants did you decide to exclude? 
• What process did you adjust, during your work? 

Tip: Be sure to capture any changes to your protocols

You yourself would want to know about any adjustments, if you ever replicate the work, so you can surmise that anyone else would want to as well. Even if a necessary adjustment you made was not ideal, transparency is the key to ensuring this is not regarded as an issue in the future. It is far better to transparently convey any non-optimal methods, or methodological constraints, than to conceal them, which could result in reproducibility or ethical issues downstream.

Visual aids for methods help when reading the whole paper

Consider whether a visual representation of your methods could be appropriate or aid understanding your process. A visual reference readers can easily return to, like a flow-diagram, decision-tree, or checklist, can help readers to better understand the complete article, not just the methods section.

Ethical Considerations

In addition to describing what you did, it is just as important to assure readers that you also followed all relevant ethical guidelines when conducting your research. While ethical standards and reporting guidelines are often presented in a separate section of a paper, ensure that your methods and protocols actually follow these guidelines. Read more about ethics .

Existing standards, checklists, guidelines, partners

While the level of detail contained in a methods section should be guided by the universal principles of rigorous science outlined above, various disciplines, fields, and projects have worked hard to design and develop consistent standards, guidelines, and tools to help with reporting all types of experiment. Below, you’ll find some of the key initiatives. Ensure you read the submission guidelines for the specific journal you are submitting to, in order to discover any further journal- or field-specific policies to follow, or initiatives/tools to utilize.

Tip: Keep your paper moving forward by providing the proper paperwork up front

Be sure to check the journal guidelines and provide the necessary documents with your manuscript submission. Collecting the necessary documentation can greatly slow the first round of peer review, or cause delays when you submit your revision.

Randomized Controlled Trials – CONSORT The Consolidated Standards of Reporting Trials (CONSORT) project covers various initiatives intended to prevent the problems of  inadequate reporting of randomized controlled trials. The primary initiative is an evidence-based minimum set of recommendations for reporting randomized trials known as the CONSORT Statement . 

Systematic Reviews and Meta-Analyses – PRISMA The Preferred Reporting Items for Systematic Reviews and Meta-Analyses ( PRISMA ) is an evidence-based minimum set of items focusing  on the reporting of  reviews evaluating randomized trials and other types of research.

Research using Animals – ARRIVE The Animal Research: Reporting of In Vivo Experiments ( ARRIVE ) guidelines encourage maximizing the information reported in research using animals thereby minimizing unnecessary studies. (Original study and proposal , and updated guidelines , in PLOS Biology .) 

Laboratory Protocols Protocols.io has developed a platform specifically for the sharing and updating of laboratory protocols , which are assigned their own DOI and can be linked from methods sections of papers to enhance reproducibility. Contextualize your protocol and improve discovery with an accompanying Lab Protocol article in PLOS ONE .

Consistent reporting of Materials, Design, and Analysis – the MDAR checklist A cross-publisher group of editors and experts have developed, tested, and rolled out a checklist to help establish and harmonize reporting standards in the Life Sciences . The checklist , which is available for use by authors to compile their methods, and editors/reviewers to check methods, establishes a minimum set of requirements in transparent reporting and is adaptable to any discipline within the Life Sciences, by covering a breadth of potentially relevant methodological items and considerations. If you are in the Life Sciences and writing up your methods section, try working through the MDAR checklist and see whether it helps you include all relevant details into your methods, and whether it reminded you of anything you might have missed otherwise.

Summary Writing tips

The main challenge you may find when writing your methods is keeping it readable AND covering all the details needed for reproducibility and replicability. While this is difficult, do not compromise on rigorous standards for credibility!

• Keep in mind future replicability, alongside understanding and readability.
• Follow checklists, and field- and journal-specific guidelines.
• Consider a commitment to rigorous and transparent science a personal responsibility, and not just adhering to journal guidelines.
• Establish whether there are persistent identifiers for any research resources you use that can be specifically cited in your methods section.
• Deposit your laboratory protocols in Protocols.io, establishing a permanent link to them. You can update your protocols later if you improve on them, as can future scientists who follow your protocols.
• Consider visual aids like flow-diagrams, lists, to help with reading other sections of the paper.
• Be specific about all decisions made during the experiments that someone reproducing your work would need to know.

Don’t

• Summarize or abbreviate methods without giving full details in a discoverable supplemental section.
• Presume you will always be able to remember how you performed the experiments, or have access to private or institutional notebooks and resources.
• Attempt to hide constraints or non-optimal decisions you had to make–transparency is the key to ensuring the credibility of your research.
• How to Write a Great Title
• How to Write an Abstract
• How to Report Statistics
• How to Write Discussions and Conclusions
• How to Edit Your Work

The contents of the Peer Review Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

The contents of the Writing Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

There’s a lot to consider when deciding where to submit your work. Learn how to choose a journal that will help your study reach its audience, while reflecting your values as a researcher…

What Is a Dissertation Methodology?

How to choose your methodology, final thoughts, how to write your dissertation methodology.

Updated September 30, 2021

Due to the complexities of the different research methods, writing your dissertation methodology can often be the most challenging and time-consuming part of your postgraduate dissertation .

This article focuses on the importance of writing a good PhD or master's dissertation methodology – and how to achieve this.

A postgraduate dissertation (or thesis) is usually formed of several detailed sections, including:

Abstract – A summary of your research topic.

Introduction – Provides background information on your topic, putting it into context. You will also confirm the main focus of your study, explain why it will add value to your area of interest and specify your key objectives.

Literature Review – A critical review of literature that relates to your chosen research topic. You will also need to identify which gap in the literature your study aims to address.

Methodology – Focuses on the research methods used within your research.

Results – Used to report on your main findings and how these relate to your research question.

Conclusion – Used to confirm the answer to your main research question, reflect on the research process and offer recommendations on future research.

The dissertation methodology forms the skeleton of any research project. It provides the reader with a clear outline of the methods you decided to use when carrying out your research.

By studying your dissertation methodology, the reader will be able to assess your research in terms of its validity and reliability.

In line with the outline given above, the methodology chapter usually appears after the literature review . Your methodology should be closely linked to the research that you conducted as part of this review, as well as the questions you aim to answer through your research and analysis.

Taking the time to find out about the different types of research available to you will allow you to identify any potential drawbacks to the method you have chosen to use. You should then be able to make allowances or adjustments to address these when it comes to carrying out your research.

Choosing your methodology will largely depend on the discipline of the qualification you are studying for and the question your dissertation will seek to answer. In most cases, you will use quantitative or qualitative research methods, although some projects will benefit from using a combination of both.

Quantitative research methods are used to gather numerical information. This research method is particularly useful if you are seeking to count, categorise, measure or identify patterns in data. To collect quantitative data, you might choose to conduct experiments, tests or surveys.

Qualitative research methods are used to gather non-statistical data. Instead of using numbers to create charts or graphs, you will need to categorise the information according to identifiers. This research method is most useful if you are seeking to develop a hypothesis. To collect qualitative data, you might choose to conduct focus groups, interviews or observations.

What to Include in Your Dissertation Methodology

Below is a dissertation methodology example to show you what information to include:

You will need to reiterate your research topic or question and give an overview of how you plan to investigate this. If there were any ethical or philosophical considerations to be made, give details.

For example, you may have sought informed consent from the people taking part in interviews or surveys.

Outline of the Methods Chosen

Confirm whether you have chosen to use quantitative research, qualitative research or a combination of both.

When choosing between qualitative and quantitative research methods, you will need to carry out initial literature and textbook research to establish the standard research methods that are normally used within your chosen area of research.

If you are not sure where to start, you could visit the library at your college or university and ask one of the librarians to help you to identify the most relevant texts.

Explanation of the Methods Chosen

Explain your rationale for selecting your chosen research methods. You should also give an overview of why these were more appropriate than using another research method.

Think about where and when the research took place and who was involved. For example, this might include information on the venue used for interviews or focus groups, dates and timescales, and whether participants were part of a particular demographic group.

Here are some examples of the type of information you may wish to include:

Qualitative Research Methods

Personal observations – Where and when did you conduct the observations? Who did you observe? Were they part of a particular community or group? How long did each observation take? How did you record your findings – did you collect audio recordings, video footage or written observations?

Focus groups – Where and when did the focus group take place? Who was involved? How were they selected? How many people took part? Were the questions asked structured, unstructured or semi-structured? Remember to include a copy of the questions that were used as an appendix.

Interviews – Where and when did the interviews take place? Who took part? How did you select the participants? What type of questions did you ask? How did you record your findings? Remember to include a copy of the questions that were used as an appendix.

The researcher’s objective was to find out customer perceptions on improving the product range currently offered by Company Y. Semi-structured interviews were held with 15 returning customers from the key target demographic for Company Y (18- to 35-year-olds). For research purposes, a returning customer was defined as somebody who purchased products from Company Y at least two times per week during the past three months. The interviews were held in an office in the staff area of the retail premises. Each interview lasted approximately 25 minutes. Responses were recorded through note-taking as none of the respondents wished to give their consent to be filmed.

Quantitative Research Methods

Existing information or data – What were the sources of the material used? How did you select material? Did you only use data published within a particular time frame?

Experiments – What tools or equipment did you use? What techniques were required? Note that when conducting experiments, it is particularly important to provide enough information to allow another researcher to conduct the experiment and obtain the same results.

Surveys – Were respondents asked to answer multiple-choice questions or complete free-text fields? How many questions were used? How long were people given to answer all of the questions? What were the demographics of the participants? Remember to include a copy of the survey in the appendices.

The survey was made up of 10 multiple-choice questions and 5 questions to be rated using a 5-point Lickert scale. The objective was to have 250 customers of Company Z complete the survey at the Company Z HQ between 1st and 5th February 2019, between the hours of 12 p.m. and 5 p.m. For research purposes, a customer was defined as any person who had purchased a product from Company Z during 2018. Customers completing the survey were allowed a maximum of 10 minutes to answer all of the questions. 200 customers responded, however not all of the surveys were completed in full, so only 150 survey results were able to be used in the data analysis.

How Was the Data Analysed?

If you have chosen to use quantitative research methods, you will need to prepare the data before analysing it – for example, you will need to check for variables, missing data and outliers. If you have used computer software to aid with analysis, information on this should also be included.

For qualitative data, you will need to categorise and code the ideas and themes that are identified from the raw data. You may also need to use techniques such as narrative analysis or discourse analysis to interpret the meaning behind responses given.

What Materials and Equipment Were Used During the Research?

This could include anything from laboratory equipment used in a scientific experiment to computer software used to analyse the results.

Were There Any Hurdles or Difficulties Faced During the Research?

If so, what were they and how did you manage to overcome them? This could be anything from difficulties in finding participants, problems obtaining consent or a shortage of the required resources needed to conduct a scientific experiment.

This paragraph should be used to evaluate the research you have conducted and justify your reasons for choosing this approach.

You do not need to go into great detail, as you will present and discuss your results in-depth within your dissertation’s ‘Results’ section.

You will need to briefly explain whether your results were conclusive, whether there were any variables and whether your choice of methodology was effective in practice.

Tips for Writing Your Dissertation Methodology

The objective for the methodology is not only to describe the methods that you used for your research. You will also need to demonstrate why you chose to use them and how you applied them.

The key point is to show that your research was conducted meticulously.

Try to keep your writing style concise and clear; this will ensure that it is easy for the reader to understand and digest.

Here are five top tips to consider when writing your dissertation methodology:

1. Look at Other Methodology Sections

Ask your supervisor to provide you with a few different examples of previously written dissertations. Reading through methodologies that have been written by past students will give you a good idea of what your finished methodology section should look like.

2. Plan Your Structure

Whichever research methods you have chosen to use, your dissertation methodology should be a clearly structured, well written section that gives a strong and justified argument for your chosen research methods.

You may wish to use headings such as:

• Research methods
• Explanation of research methods chosen
• Data analysis and references

Once you have drafted an outline, ask your supervisor for advice on whether there is anything you have missed and whether your structure looks logical.

3. Consider Your Audience

When writing your methodology, have regard for the people who are likely to be reading it. For example, if you have chosen to use research methods that are commonly chosen within your area of research or discipline, there is no need to give a great deal of justification or background information.

If you decide to use a less popular approach, it is advisable to give much more detailed information on how and why you chose to use this method.

4. Remain Focused on Your Aims and Research Questions

Your dissertation methodology should give a clear indication as to why the research methods you have chosen are suitable for the aims of your research.

When writing your dissertation methodology, ensure that you link your research choices back to the overall aims and objectives of your dissertation. To help you to remain focused, it can be helpful to include a clear definition of the question you are aiming to answer at the start of your methodology section.

5. Refer to Any Obstacles or Difficulties That You Dealt With

If you faced any problems during the data collection or analysis phases, use the methodology section to talk about what you did to address these issues and minimise the impact.

Whether you are completing a PhD or master's degree, writing your thesis or dissertation methodology is often considered to be the most difficult and time-consuming part of completing your major research project.

The key to success when writing a methodology section is to have a clear structure. Remember, the purpose of the methodology section of your research project is to ensure that the reader has a full understanding of the methods you have chosen.

You should use your methodology section to provide clear justification as to why you have chosen a particular research method instead of other potential methods. Avoid referring to your personal opinions, thoughts or interests within your methodology; keep the information that you include factual and ensure that everything is backed up by appropriate academic references.

You might also be interested in these other Wikijob articles:

Or explore the Postgraduate / PHD sections.

Writing The Methodology Chapter

5 Time-Saving Tips & Tools

By: David Phair (PhD) and Amy Murdock (PhD) | July 2022

The methodology chapter is a crucial part of your dissertation or thesis – it’s where you provide context and justification for your study’s design. This in turn demonstrates your understanding of research theory, which is what earns you marks .

Over the years, we’ve helped thousands of students navigate this tricky section of the research process. In this post, we’ll share 5 time-saving tips to help you effectively write up your research methodology chapter .

Overview: Writing The Methodology Chapter

• Develop a (rough) outline before you start writing
• Draw inspiration from similar studies in your topic area
• Justify every research design choice that you make
• Err on the side of too much detail , rather than too little
• Back up every design choice by referencing literature

1. Develop an outline before you start writing 

The first thing to keep in mind when writing your methodology chapter (and the rest of your dissertation) is that it’s always a good idea to sketch out a rough outline of what you are going to write about before you start writing . This will ensure that you stay focused and have a clear structural logic – thereby making the writing process simpler and faster.

An easy method of finding a structure for this chapter is to use frameworks that already exist, such as Saunder’s “ research onion ” as an example. Alternatively, there are many free methodology chapter templates for you to use as a starting point, so don’t feel like you have to create a new one from scratch.

Next, you’ll want to consider what your research approach is , and how you can break it down from a top-down angle, i.e., from the philosophical down to the concrete/tactical level. For example, you’ll need to articulate the following:  

• Are you using a positivist , interpretivist , or pragmatist approach ?
• Are you using inductive or deductive reasoning?
• Are you using a qualitative , quantitative, or mixed methods study?

Keep these questions front of mind to ensure that you have a clear, well-aligned line of argument that will maintain your chapter’s internal and external consistency.

Remember, it’s okay if you feel overwhelmed when you first start the methodology chapter. Nobody is born with an innate knowledge of how to do this, so be prepared for the learning curve associated with new research projects. It’s no small task to write up a dissertation or thesis, so be kind to yourself!

2. Take inspiration from other studies 

Generally, there are plenty of existing journal articles that will share similar methodological approaches to your study. With any luck, there will also be existing dissertations and theses that adopt a similar methodological approach and topic. So, consider taking inspiration from these studies to help curate the contents of your methodology chapter.

Students often find it difficult to choose what content to include in the methodology chapter and what to leave for the appendix. By reviewing other studies with similar approaches, you will get a clearer sense of your discipline’s norms and characteristics . This will help you, especially in terms of deciding on the structure and depth of discussion.  

While you can draw inspiration from other studies, remember that it’s vital to pay close attention to your university’s specific guidelines, so you can anticipate departmental expectations of this section’s layout and content (and make it easier to work with your supervisor). Doing this is also a great way to figure out how in-depth your discussion should be. For example, word-count guidelines can help you decide whether to include or omit certain information.

Need a helping hand?

3. Justify every design choice you make

The golden rule of the methodology chapter is that you need to justify each and every design choice that you make, no matter how small or inconsequential it may seem. We often see that students merely state what they did instead of why they did what they did – and this costs them marks.

Keep in mind that you need to illustrate the strength of your study’s methodological foundation. By discussing the “what”, “why” and “how” of your choices, you demonstrate your understanding of research design and simultaneously justify the relevancy and efficacy of your methodology – both of which will earn you marks.

It’s never an easy task to conduct research. So, it’s seldom the case that you’ll be able to use the very best possible methodology for your research (e.g. due to time or budgetary constraints ). That’s okay – but make sure that you explain and justify your use of an alternate methodology to help justify your approach.

Ultimately, if you don’t justify and explain the logic behind each of your choices, your marker will have to assume that you simply didn’t know any better . So, make sure that you justify every choice, especially when it is a subpar choice (due to a practical constraint, for example). You can see an example of how this is done here.

4. Err on the side of too much detail

We often see a tendency in students to mistakenly give more of an overview of their methodology instead of a step-by-step breakdown . Since the methodology chapter needs to be detailed enough for another researcher to replicate your study, your chapter should be particularly granular in terms of detail. 

Whether you’re doing a qualitative or quantitative study, it’s crucial to convey rigor in your research. You can do this by being especially detailed when you discuss your data, so be absolutely clear about your:  

• Sampling strategy
• Data collection method(s)
• Data preparation
• Analysis technique(s)

As you will likely face an extensive period of editing at your supervisor/reviewer’s direction, you’ll make it much easier for yourself if you have more information than you’d need. Some supervisors expect extensive detail around a certain aspect of your dissertation (like your research philosophy), while others may not expect it at all.

Remember, it’s quicker and easier to remove/ trim down information than it is to add information after the fact, so take the time to show your supervisor that you know what you’re talking about (methodologically) and you’re doing your best to be rigorous in your research.

5. Provide citations to support each design choice

Related to the issue of poor justification (tip #3), it’s important include high-quality academic citations to support the justification of your design choices. In other words, it’s not enough to simply explain why you chose a specific approach – you need to support each justification with reference to academic material.  

Simply put, you should avoid thinking of your methodology chapter as a citation-less section in your dissertation. As with your literature review, your methods section must include citations for every decision you make, since you are building on prior research.  You must show that you are making decisions based on methods that are proven to be effective, and not just because you “feel” that they are effective.

When considering the source of your citations, you should stick to peer-reviewed academic papers and journals and avoid using websites or blog posts (like us, hehe). Doing this will demonstrate that you are familiar with the literature and that you are factoring in what credible academics have to say about your methodology.

As a final tip, it’s always a good idea to cite as you go . If you leave this for the end, then you’ll end up spending a lot of precious time retracing your steps to find your citations and risk losing track of them entirely. So, be proactive and drop in those citations as you write up . You’ll thank yourself later!

Let’s Recap…

In this post, we covered 5 time-saving tips for writing up the methodology chapter:

• Look at similar studies in your topic area
• Justify every design choice that you make
• Back up every design choice by referencing methodology literature

If you’ve got any questions relating to the methodology chapter, feel free to drop a comment below. Alternatively, if you’re interested in getting 1-on-1 help with your thesis or dissertation, be sure to check out our private coaching service .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

What data analysis method can work best for my study. I am using a mixed method in the study. I am developing a framework to address the challenges faced by the taxi operators as entrepreneurs. I will need to analyse both using qualitative and quantitative.

How to find standard deviation for non numerical data

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation

What Is a Dissertation? | Guide, Examples, & Template

A dissertation is a long-form piece of academic writing based on original research conducted by you. It is usually submitted as the final step in order to finish a PhD program.

Your dissertation is probably the longest piece of writing you’ve ever completed. It requires solid research, writing, and analysis skills, and it can be intimidating to know where to begin.

Your department likely has guidelines related to how your dissertation should be structured. When in doubt, consult with your supervisor.

You can also download our full dissertation template in the format of your choice below. The template includes a ready-made table of contents with notes on what to include in each chapter, easily adaptable to your department’s requirements.

Download Word template Download Google Docs template

• In the US, a dissertation generally refers to the collection of research you conducted to obtain a PhD.
• In other countries (such as the UK), a dissertation often refers to the research you conduct to obtain your bachelor’s or master’s degree.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Dissertation committee and prospectus process, how to write and structure a dissertation, acknowledgements or preface, list of figures and tables, list of abbreviations, introduction, literature review, methodology, reference list, proofreading and editing, defending your dissertation, free checklist and lecture slides.

When you’ve finished your coursework, as well as any comprehensive exams or other requirements, you advance to “ABD” (All But Dissertation) status. This means you’ve completed everything except your dissertation.

Prior to starting to write, you must form your committee and write your prospectus or proposal . Your committee comprises your adviser and a few other faculty members. They can be from your own department, or, if your work is more interdisciplinary, from other departments. Your committee will guide you through the dissertation process, and ultimately decide whether you pass your dissertation defense and receive your PhD.

Your prospectus is a formal document presented to your committee, usually orally in a defense, outlining your research aims and objectives and showing why your topic is relevant . After passing your prospectus defense, you’re ready to start your research and writing.

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

The structure of your dissertation depends on a variety of factors, such as your discipline, topic, and approach. Dissertations in the humanities are often structured more like a long essay , building an overall argument to support a central thesis , with chapters organized around different themes or case studies.

However, hard science and social science dissertations typically include a review of existing works, a methodology section, an analysis of your original research, and a presentation of your results , presented in different chapters.

Dissertation examples

We’ve compiled a list of dissertation examples to help you get started.

• Example dissertation #1: Heat, Wildfire and Energy Demand: An Examination of Residential Buildings and Community Equity (a dissertation by C. A. Antonopoulos about the impact of extreme heat and wildfire on residential buildings and occupant exposure risks).
• Example dissertation #2: Exploring Income Volatility and Financial Health Among Middle-Income Households (a dissertation by M. Addo about income volatility and declining economic security among middle-income households).
• Example dissertation #3: The Use of Mindfulness Meditation to Increase the Efficacy of Mirror Visual Feedback for Reducing Phantom Limb Pain in Amputees (a dissertation by N. S. Mills about the effect of mindfulness-based interventions on the relationship between mirror visual feedback and the pain level in amputees with phantom limb pain).

The very first page of your document contains your dissertation title, your name, department, institution, degree program, and submission date. Sometimes it also includes your student number, your supervisor’s name, and the university’s logo.

Read more about title pages

The acknowledgements section is usually optional and gives space for you to thank everyone who helped you in writing your dissertation. This might include your supervisors, participants in your research, and friends or family who supported you. In some cases, your acknowledgements are part of a preface.

Read more about acknowledgements Read more about prefaces

The abstract is a short summary of your dissertation, usually about 150 to 300 words long. Though this may seem very short, it’s one of the most important parts of your dissertation, because it introduces your work to your audience.

Your abstract should:

• State your main topic and the aims of your research
• Describe your methods
• Summarize your main results
• State your conclusions

Read more about abstracts

The table of contents lists all of your chapters, along with corresponding subheadings and page numbers. This gives your reader an overview of your structure and helps them easily navigate your document.

Remember to include all main parts of your dissertation in your table of contents, even the appendices. It’s easy to generate a table automatically in Word if you used heading styles. Generally speaking, you only include level 2 and level 3 headings, not every subheading you included in your finished work.

Read more about tables of contents

While not usually mandatory, it’s nice to include a list of figures and tables to help guide your reader if you have used a lot of these in your dissertation. It’s easy to generate one of these in Word using the Insert Caption feature.

Read more about lists of figures and tables

Similarly, if you have used a lot of abbreviations (especially industry-specific ones) in your dissertation, you can include them in an alphabetized list of abbreviations so that the reader can easily look up their meanings.

Read more about lists of abbreviations

In addition to the list of abbreviations, if you find yourself using a lot of highly specialized terms that you worry will not be familiar to your reader, consider including a glossary. Here, alphabetize the terms and include a brief description or definition.

Read more about glossaries

The introduction serves to set up your dissertation’s topic, purpose, and relevance. It tells the reader what to expect in the rest of your dissertation. The introduction should:

• Establish your research topic , giving the background information needed to contextualize your work
• Narrow down the focus and define the scope of your research
• Discuss the state of existing research on the topic, showing your work’s relevance to a broader problem or debate
• Clearly state your research questions and objectives
• Outline the flow of the rest of your work

Everything in the introduction should be clear, engaging, and relevant. By the end, the reader should understand the what, why, and how of your research.

Read more about introductions

A formative part of your research is your literature review . This helps you gain a thorough understanding of the academic work that already exists on your topic.

Literature reviews encompass:

• Finding relevant sources (e.g., books and journal articles)
• Assessing the credibility of your sources
• Critically analyzing and evaluating each source
• Drawing connections between them (e.g., themes, patterns, conflicts, or gaps) to strengthen your overall point

A literature review is not merely a summary of existing sources. Your literature review should have a coherent structure and argument that leads to a clear justification for your own research. It may aim to:

• Address a gap in the literature or build on existing knowledge
• Take a new theoretical or methodological approach to your topic
• Propose a solution to an unresolved problem or advance one side of a theoretical debate

Read more about literature reviews

Theoretical framework

Your literature review can often form the basis for your theoretical framework. Here, you define and analyze the key theories, concepts, and models that frame your research.

Read more about theoretical frameworks

Your methodology chapter describes how you conducted your research, allowing your reader to critically assess its credibility. Your methodology section should accurately report what you did, as well as convince your reader that this was the best way to answer your research question.

A methodology section should generally include:

• The overall research approach ( quantitative vs. qualitative ) and research methods (e.g., a longitudinal study )
• Your data collection methods (e.g., interviews or a controlled experiment )
• Details of where, when, and with whom the research took place
• Any tools and materials you used (e.g., computer programs, lab equipment)
• Your data analysis methods (e.g., statistical analysis , discourse analysis )
• An evaluation or justification of your methods

Read more about methodology sections

Your results section should highlight what your methodology discovered. You can structure this section around sub-questions, hypotheses , or themes, but avoid including any subjective or speculative interpretation here.

Your results section should:

• Concisely state each relevant result together with relevant descriptive statistics (e.g., mean , standard deviation ) and inferential statistics (e.g., test statistics , p values )
• Briefly state how the result relates to the question or whether the hypothesis was supported
• Report all results that are relevant to your research questions , including any that did not meet your expectations.

Additional data (including raw numbers, full questionnaires, or interview transcripts) can be included as an appendix. You can include tables and figures, but only if they help the reader better understand your results. Read more about results sections

Your discussion section is your opportunity to explore the meaning and implications of your results in relation to your research question. Here, interpret your results in detail, discussing whether they met your expectations and how well they fit with the framework that you built in earlier chapters. Refer back to relevant source material to show how your results fit within existing research in your field.

Some guiding questions include:

• What do your results mean?
• Why do your results matter?
• What limitations do the results have?

If any of the results were unexpected, offer explanations for why this might be. It’s a good idea to consider alternative interpretations of your data.

Read more about discussion sections

Your dissertation’s conclusion should concisely answer your main research question, leaving your reader with a clear understanding of your central argument and emphasizing what your research has contributed to the field.

In some disciplines, the conclusion is just a short section preceding the discussion section, but in other contexts, it is the final chapter of your work. Here, you wrap up your dissertation with a final reflection on what you found, with recommendations for future research and concluding remarks.

It’s important to leave the reader with a clear impression of why your research matters. What have you added to what was already known? Why is your research necessary for the future of your field?

Read more about conclusions

It is crucial to include a reference list or list of works cited with the full details of all the sources that you used, in order to avoid plagiarism. Be sure to choose one citation style and follow it consistently throughout your dissertation. Each style has strict and specific formatting requirements.

Common styles include MLA , Chicago , and APA , but which style you use is often set by your department or your field.

Create APA citations Create MLA citations

Your dissertation should contain only essential information that directly contributes to answering your research question. Documents such as interview transcripts or survey questions can be added as appendices, rather than adding them to the main body.

Read more about appendices

Making sure that all of your sections are in the right place is only the first step to a well-written dissertation. Don’t forget to leave plenty of time for editing and proofreading, as grammar mistakes and sloppy spelling errors can really negatively impact your work.

Dissertations can take up to five years to write, so you will definitely want to make sure that everything is perfect before submitting. You may want to consider using a professional dissertation editing service , AI proofreader or grammar checker to make sure your final project is perfect prior to submitting.

After your written dissertation is approved, your committee will schedule a defense. Similarly to defending your prospectus, dissertation defenses are oral presentations of your work. You’ll present your dissertation, and your committee will ask you questions. Many departments allow family members, friends, and other people who are interested to join as well.

After your defense, your committee will meet, and then inform you whether you have passed. Keep in mind that defenses are usually just a formality; most committees will have resolved any serious issues with your work with you far prior to your defense, giving you ample time to fix any problems.

As you write your dissertation, you can use this simple checklist to make sure you’ve included all the essentials.

Checklist: Dissertation

My title page includes all information required by my university.

I have included acknowledgements thanking those who helped me.

My abstract provides a concise summary of the dissertation, giving the reader a clear idea of my key results or arguments.

I have created a table of contents to help the reader navigate my dissertation. It includes all chapter titles, but excludes the title page, acknowledgements, and abstract.

My introduction leads into my topic in an engaging way and shows the relevance of my research.

My introduction clearly defines the focus of my research, stating my research questions and research objectives .

My introduction includes an overview of the dissertation’s structure (reading guide).

I have conducted a literature review in which I (1) critically engage with sources, evaluating the strengths and weaknesses of existing research, (2) discuss patterns, themes, and debates in the literature, and (3) address a gap or show how my research contributes to existing research.

I have clearly outlined the theoretical framework of my research, explaining the theories and models that support my approach.

I have thoroughly described my methodology , explaining how I collected data and analyzed data.

I have concisely and objectively reported all relevant results .

I have (1) evaluated and interpreted the meaning of the results and (2) acknowledged any important limitations of the results in my discussion .

I have clearly stated the answer to my main research question in the conclusion .

I have clearly explained the implications of my conclusion, emphasizing what new insight my research has contributed.

I have provided relevant recommendations for further research or practice.

If relevant, I have included appendices with supplemental information.

I have included an in-text citation every time I use words, ideas, or information from a source.

I have listed every source in a reference list at the end of my dissertation.

I have consistently followed the rules of my chosen citation style .

I have followed all formatting guidelines provided by my university.

Congratulations!

The end is in sight—your dissertation is nearly ready to submit! Make sure it's perfectly polished with the help of a Scribbr editor.

If you’re an educator, feel free to download and adapt these slides to teach your students about structuring a dissertation.

Open Google Slides Download PowerPoint

Is this article helpful?

Other students also liked.

• How to Write a Literature Review | Guide, Examples, & Templates
• Dissertation Table of Contents in Word | Instructions & Examples
• How to Choose a Dissertation Topic | 8 Steps to Follow

More interesting articles

• Checklist: Writing a dissertation
• Dissertation & Thesis Outline | Example & Free Templates
• Dissertation Binding and Printing | Options, Tips, & Comparison
• Example of a dissertation abstract
• Figure and Table Lists | Word Instructions, Template & Examples
• How to Write a Discussion Section | Tips & Examples
• How to Write a Dissertation or Thesis Proposal
• How to Write a Results Section | Tips & Examples
• How to Write a Thesis or Dissertation Conclusion
• How to Write a Thesis or Dissertation Introduction
• How to Write an Abstract | Steps & Examples
• How to Write Recommendations in Research | Examples & Tips
• List of Abbreviations | Example, Template & Best Practices
• Operationalization | A Guide with Examples, Pros & Cons
• Prize-Winning Thesis and Dissertation Examples
• Purpose and structure of an advisory report
• Relevance of Your Dissertation Topic | Criteria & Tips
• Research Paper Appendix | Example & Templates
• Shorten your abstract or summary
• Theoretical Framework Example for a Thesis or Dissertation
• Thesis & Dissertation Acknowledgements | Tips & Examples
• Thesis & Dissertation Database Examples
• Thesis & Dissertation Title Page | Free Templates & Examples
• What is a Dissertation Preface? | Definition & Examples
• What is a Glossary? | Definition, Templates, & Examples
• What Is a Research Methodology? | Steps & Tips
• What Is a Theoretical Framework? | Guide to Organizing
• What Is a Thesis? | Ultimate Guide & Examples

"I thought AI Proofreading was useless but.."

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

No notifications.

Dissertation Methodology Writing Guide

Introduction.

The methodology section will be the chapter that you write following on from your literature review . After you have researched and discovered the gap in the available literature, it is possible for you to create ideas for your proposed research.

In your research proposal , you will have had a suggested methodology where you would have given ideas about how to approach the research: this would have been either through a primary data approach or through collecting secondary data .

Primary data

Primary data is any form of evidence that you collect yourself through your own research in the form of surveys, interviews, questionnaires, focus groups, observations, experiments. Primary data collection methods does not involve the collection of data from other researchers’ work and their studies.

Secondary data

Collecting secondary data is the collection of evidence from previous researchers’ work. An example could be focusing on another researchers’ experiment and using their findings as a basis for your dissertation. An example could be collecting the findings from two different experiments and comparing the findings of these studies in relation to the question posed.

Once you have decided what type of data you will be collecting, you will then need to determine whether the data being collected is qualitative or quantitative as this will have an impact on the analysis of your research.

Quantitative

Quantitative research only produces results on the specific issue that is being investigated and uses statistical, mathematical and computational programmes.

A closed-ended questionnaire would be analysed using quantitative research if the researcher merely computed the results and produced a series of comments as to the percentages of respondents who gave specific answers. A common programme by which to analyse quantitative research is SPSS.

Qualitative

Qualitative research tends to be used more in the social sciences and arts and is when a research seeks to ask ‘why’ and ‘how’ something has happened and explains the reasons with recourse to empirical mathematical models.

Within primary research that uses qualitative research, small focus groups can often be employed.

An open-ended questionnaire that collates and assesses a range of verbal responses would be analysed using qualitative techniques as the answers given do not lend themselves to being processed in the manner described above relating to closed questionnaires.

Mixed Methodology

Another option is through a mixed methods approach, which would be the collection of both primary and secondary data.

In a dissertation where one is assessing, for instance, the effects of flooding in the Wirral peninsula, it is likely that all the research techniques mentioned above would be used.

Secondary data would be used through a literature review. Closed-ended questionnaires could be analysed using a statistical panel and interviews with experts would be commented upon with reference to existing literature.

Accordingly, both primary and secondary research techniques would be utilised as well as qualitative and quantitative mechanisms.

Writing Your Methodology

You should begin your methodology with a brief introduction to the chapter, this should also include relaying the aims of the study. Following on from this, it is best to start by defining and choosing the research paradigm for the dissertation.

Research paradigms – there are 4 main approaches to research. These are positivism, interpretivism (also known as constructivism), post-positivism and critical theory.

• Positivism: philosophical viewpoint that the validity of research comes from objective experimental testing
• Interpretivism (Constructivism): usually associated with qualitative research, interpretivism research is subjective. This means that results from research are down to interpretation by the researcher i.e answers to questions in an interview
• Post-positivism: as opposed to positivism, post positivism accepts subjectivity in research and tests qualitative data alongside quantitative data

Once you have defined your research philosophy, the next step would be to identify your research approach and instrument.

Research approach – This can be separated by two types:

• Deductive research
• Inductive research

Deductive research is the approach you would take if you had hypotheses that were being tested, then you would be using a deductive research approach.

Inductive research is when there is a set of observations and a theory is developed to explain those observations or any patterns that are amongst those observations.

Following on from this, you would then be expected to discuss your chosen data collection method along with stating if the research is either quantitative or qualitative. When writing about key terms i.e. primary data; it is always best to define, explain and justify why.

In so doing, you should also note (briefly) what is inappropriate about the other approaches as well as the ways in which you have overcome any negatives that are associated with your approach.

If your chosen methodology is the collection of primary data, the next step would be the describe and explain the sampling and participant selection.

Here you would need to describe and explain the chosen sampling method along with the number of participants selected. It is always good to include how you contacted the participants and recruited them for the study.

If you are using primary data, it is always crucial to include a sub-chapter of the work that discusses any ethical concerns and considerations that arose due to your chosen methodology.

For both primary and secondary data, it is necessary to include a sub-section on the data analysis that will be used to collate and analyse the data gathered in the research.

Here you will discuss how you intend to analyse the data and why you have chosen this analytical technique.

Justification

Whichever approach you use it is important that you justify your decision and that you do so via reference to existing academic works – and writing only in the third person.

As with the background section of your dissertation, your methodology section needs to be grounded in existing academic opinion.

The following books provide not only an overview of methodological approaches (and the strengths and weaknesses associated with each) but are also the sorts of books that your lecturers may expect to see referenced within your methodology section, depending on the type of course you are doing.

Bell, J. (1993). Doing your research project . Maidenhead: Open University Press.

Bryman, A. (2012). Social research methods (4th edn). Oxford: Oxford University Press.

Denscombe, M. (2007). The good research guide (3rd edn). Maidenhead: Open University Press.

Flick, U. (2011). Introducing research methodology . London: SAGE.

Grinyer, A. (2002). ‘The anonymity of research participants: Assumptions, ethics and practicalities’. Social Research Update , Vol. 36, University of Surrey.

Morgan, G. and Smircich, L. (1980). ‘The case for qualitative research’, The Academy of Management Review . Vol. 5 (4), pp. 491-500.

Ritchie, J. and Lewis, L. (2003). Qualitative research practice: A guide for social science students and researchers . London: SAGE.

Robson, C. (2002). Real world research (2nd edn). Oxford: Blackwell Publishing.

Silverman, D. (2010). Doing qualitative research: A practical handbook (3rd edn). London: SAGE.

You do not need to read them all, but you should show (using appropriate and limited direct quotation for extra marks) at least some knowledge of the arguments contained within these books. For an undergraduate dissertation it would be good practice to include at least five of these books (or their equivalent – depending upon what is available within your library) in your bibliography.

We can help

If you require assistance to write the methodology section of your dissertation, you may want to consider our helpful service which is a great way to get a head start on your work.

Checklist: Writing a Methodology

• Have I selected a research method which is within my abilities and matches my aims?
• Have I considered other research methods which may be appropriate?
• Can I critically explain why I ruled these methods out?
• Have I acknowledged the strengths and weaknesses of my chosen method?

Congratulations!

Well done on completing this checklist! You're doing great.

Dissertation Methodology FAQ's

Cite this work.

To export a reference to this article please select a referencing stye below:

Our dissertation writing guide chapters .

• Dissertation Writing Guide
• Dissertation Topic
• Dissertation Title
• Dissertation Proposal
• Dissertation Abstract
• Dissertation Introduction
• Dissertation Background
• Literature Review
• Dissertation Methodology
• Dissertation Results Section
• Dissertation Discussion
• Dissertation Conclusion

Study Resources

Free resources to assist you with your university studies!

• Dissertation Examples
• Dissertation Proposal Examples
• Example Dissertation Titles
• Example Dissertation Topics
• Free Resources Index

Need more assistance? Check out our suite of services to assist you further.

• Samples of our Service
• Full Service Portfolio
• Dissertation Writing Service
• Marking Service

• LEARNING SKILLS
• Writing a Dissertation or Thesis
• Methodology

Search SkillsYouNeed:

Learning Skills:

• A - Z List of Learning Skills
• What is Learning?
• Learning Approaches
• Learning Styles
• 8 Types of Learning Styles
• Understanding Your Preferences to Aid Learning
• Lifelong Learning
• Decisions to Make Before Applying to University
• Top Tips for Surviving Student Life
• Living Online: Education and Learning
• 8 Ways to Embrace Technology-Based Learning Approaches
• Critical Thinking Skills
• Critical Thinking and Fake News
• Understanding and Addressing Conspiracy Theories
• Critical Analysis
• Study Skills
• Exam Skills
• How to Write a Research Proposal
• Ethical Issues in Research
• Dissertation: The Introduction
• Researching and Writing a Literature Review
• Writing your Methodology
• Dissertation: Results and Discussion
• Dissertation: Conclusions and Extras

Writing Your Dissertation or Thesis eBook

Part of the Skills You Need Guide for Students .

• Research Methods
• Teaching, Coaching, Mentoring and Counselling
• Employability Skills for Graduates

Subscribe to our FREE newsletter and start improving your life in just 5 minutes a day.

You'll get our 5 free 'One Minute Life Skills' and our weekly newsletter.

We'll never share your email address and you can unsubscribe at any time.

Writing your Dissertation: Methodology

A key part of your dissertation or thesis is the methodology. This is not quite the same as ‘methods’.

The methodology describes the broad philosophical underpinning to your chosen research methods, including whether you are using qualitative or quantitative methods, or a mixture of both, and why.

You should be clear about the academic basis for all the choices of research methods that you have made. ' I was interested ' or ' I thought... ' is not enough; there must be good academic reasons for your choice.

What to Include in your Methodology

If you are submitting your dissertation in sections, with the methodology submitted before you actually undertake the research, you should use this section to set out exactly what you plan to do.

The methodology should be linked back to the literature to explain why you are using certain methods, and the academic basis of your choice.

If you are submitting as a single thesis, then the Methodology should explain what you did, with any refinements that you made as your work progressed. Again, it should have a clear academic justification of all the choices that you made and be linked back to the literature.

Common Research Methods for the Social Sciences

There are numerous research methods that can be used when researching scientific subjects, you should discuss which are the most appropriate for your research with your supervisor.

The following research methods are commonly used in social science, involving human subjects:

One of the most flexible and widely used methods for gaining qualitative information about people’s experiences, views and feelings is the interview.

An interview can be thought of as a guided conversation between a researcher (you) and somebody from whom you wish to learn something (often referred to as the ‘informant’).

The level of structure in an interview can vary, but most commonly interviewers follow a semi-structured format.  This means that the interviewer will develop a guide to the topics that he or she wishes to cover in the conversation, and may even write out a number of questions to ask.

However, the interviewer is free to follow different paths of conversation that emerge over the course of the interview, or to prompt the informant to clarify and expand on certain points. Therefore, interviews are particularly good tools for gaining detailed information where the research question is open-ended in terms of the range of possible answers.

Interviews are not particularly well suited for gaining information from large numbers of people. Interviews are time-consuming, and so careful attention needs to be given to selecting informants who will have the knowledge or experiences necessary to answer the research question.  

See our page: Interviews for Research for more information.

Observations

If a researcher wants to know what people do under certain circumstances, the most straightforward way to get this information is sometimes simply to watch them under those circumstances.

Observations can form a part of either quantitative or qualitative research.  For instance, if a researcher wants to determine whether the introduction of a traffic sign makes any difference to the number of cars slowing down at a dangerous curve, she or he could sit near the curve and count the number of cars that do and do not slow down.  Because the data will be numbers of cars, this is an example of quantitative observation.

A researcher wanting to know how people react to a billboard advertisement might spend time watching and describing the reactions of the people.  In this case, the data would be descriptive , and would therefore be qualitative.

There are a number of potential ethical concerns that can arise with an observation study. Do the people being studied know that they are under observation?  Can they give their consent?  If some people are unhappy with being observed, is it possible to ‘remove’ them from the study while still carrying out observations of the others around them?

See our page: Observational Research and Secondary Data for more information.

Questionnaires

If your intended research question requires you to collect standardised (and therefore comparable) information from a number of people, then questionnaires may be the best method to use.

Questionnaires can be used to collect both quantitative and qualitative data, although you will not be able to get the level of detail in qualitative responses to a questionnaire that you could in an interview.

Questionnaires require a great deal of care in their design and delivery, but a well-developed questionnaire can be distributed to a much larger number of people than it would be possible to interview. 

Questionnaires are particularly well suited for research seeking to measure some parameters for a group of people (e.g., average age, percentage agreeing with a proposition, level of awareness of an issue), or to make comparisons between groups of people (e.g., to determine whether members of different generations held the same or different views on immigration).

See our page: Surveys and Survey Design for more information.

Documentary Analysis

Documentary analysis involves obtaining data from existing documents without having to question people through interview, questionnaires or observe their behaviour. Documentary analysis is the main way that historians obtain data about their research subjects, but it can also be a valuable tool for contemporary social scientists.

Documents are tangible materials in which facts or ideas have been recorded.  Typically, we think of items written or produced on paper, such as newspaper articles, Government policy records, leaflets and minutes of meetings.  Items in other media can also be the subject of documentary analysis, including films, songs, websites and photographs.

Documents can reveal a great deal about the people or organisation that produced them and the social context in which they emerged. 

Some documents are part of the public domain and are freely accessible, whereas other documents may be classified, confidential or otherwise unavailable to public access.  If such documents are used as data for research, the researcher must come to an agreement with the holder of the documents about how the contents can and cannot be used and how confidentiality will be preserved.

How to Choose your Methodology and Precise Research Methods

Your methodology should be linked back to your research questions and previous research.

Visit your university or college library and ask the librarians for help; they should be able to help you to identify the standard research method textbooks in your field. See also our section on Research Methods for some further ideas.

Such books will help you to identify your broad research philosophy, and then choose methods which relate to that. This section of your dissertation or thesis should set your research in the context of its theoretical underpinnings.

The methodology should also explain the weaknesses of your chosen approach and how you plan to avoid the worst pitfalls, perhaps by triangulating your data with other methods, or why you do not think the weakness is relevant.

For every philosophical underpinning, you will almost certainly be able to find researchers who support it and those who don’t.

Use the arguments for and against expressed in the literature to explain why you have chosen to use this methodology or why the weaknesses don’t matter here.

Structuring your Methodology

It is usually helpful to start your section on methodology by setting out the conceptual framework in which you plan to operate with reference to the key texts on that approach.

You should be clear throughout about the strengths and weaknesses of your chosen approach and how you plan to address them. You should also note any issues of which to be aware, for example in sample selection or to make your findings more relevant.

You should then move on to discuss your research questions, and how you plan to address each of them.

This is the point at which to set out your chosen research methods, including their theoretical basis, and the literature supporting them. You should make clear whether you think the method is ‘tried and tested’ or much more experimental, and what kind of reliance you could place on the results. You will also need to discuss this again in the discussion section.

Your research may even aim to test the research methods, to see if they work in certain circumstances.

You should conclude by summarising your research methods, the underpinning approach, and what you see as the key challenges that you will face in your research. Again, these are the areas that you will want to revisit in your discussion.

Your methodology, and the precise methods that you choose to use in your research, are crucial to its success.

It is worth spending plenty of time on this section to ensure that you get it right. As always, draw on the resources available to you, for example by discussing your plans in detail with your supervisor who may be able to suggest whether your approach has significant flaws which you could address in some way.

Continue to: Research Methods Designing Research

See Also: Dissertation: Results and Discussion Writing a Literature Review | Writing a Research Proposal Writing a Dissertation: The Introduction

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 416 other subscribers.

Email Address

Writing your dissertation - structure and sections

Posted in: dissertations

In this post, we look at the structural elements of a typical dissertation. Your department may wish you to include additional sections but the following covers all core elements you will need to work on when designing and developing your final assignment.

The table below illustrates a classic dissertation layout with approximate lengths for each section.

Hopkins, D. and Reid, T., 2018.  The Academic Skills Handbook: Your Guid e to Success in Writing, Thinking and Communicating at University . Sage.

Your title should be clear, succinct and tell the reader exactly what your dissertation is about. If it is too vague or confusing, then it is likely your dissertation will be too vague and confusing. It is important therefore to spend time on this to ensure you get it right, and be ready to adapt to fit any changes of direction in your research or focus.

In the following examples, across a variety of subjects, you can see how the students have clearly identified the focus of their dissertation, and in some cases target a problem that they will address:

An econometric analysis of the demand for road transport within the united Kingdom from  1965 to 2000

To what extent does payment card fraud affect UK bank profitability and bank stakeholders?  Does this justify fraud prevention?

A meta-analysis of implant materials for intervertebral disc replacement and regeneration.

The role of ethnic institutions in social development; the case of Mombasa, Kenya.

Why haven’t biomass crops been adopted more widely as a source of renewable energy in the United Kingdom?

Mapping the criminal mind: Profiling and its limitation.

The Relative Effectiveness of Interferon Therapy for Chronic Hepatitis C

Under what conditions did the European Union exhibit leadership in international climate change negotiations from 1992-1997, 1997-2005 and 2005-Copenhagen respectively?

The first thing your reader will read (after the title) is your abstract. However, you need to write this last. Your abstract is a summary of the whole project, and will include aims and objectives, methods, results and conclusions. You cannot write this until you have completed your write-up.

Introduction

Your introduction should include the same elements found in most academic essay or report assignments, with the possible inclusion of research questions. The aim of the introduction is to set the scene, contextualise your research, introduce your focus topic and research questions, and tell the reader what you will be covering.  It should move from the general  and work towards the specific. You should include the following:

• Attention-grabbing statement (a controversy, a topical issue, a contentious view, a recent problem etc)
• Background and context
• Introduce the topic, key theories, concepts, terms of reference, practices, (advocates and critic)
• Introduce the problem and focus of your research
• Set out your research question(s) (this could be set out in a separate section)
• Your approach to answering your research questions.

Literature review

Your literature review is the section of your report where you show what is already known about the area under investigation and demonstrate the need for your particular study. This is a significant section in your dissertation (30%) and you should allow plenty of time to carry out a thorough exploration of your focus topic and use it to help you identify a specific problem and formulate your research questions.

You should approach the literature review with the critical analysis dial turned up to full volume. This is not simply a description, list, or summary  of everything you have read. Instead, it is a synthesis of your reading, and should include analysis and evaluation of readings, evidence, studies and data, cases, real world applications and views/opinions expressed.  Your supervisor is looking for this detailed critical approach in your literature review, where you unpack sources, identify strengths and weaknesses and find gaps in the research.

In other words, your literature review is your opportunity to show the reader why your paper is important and your research is significant, as it addresses the gap or on-going issue you have uncovered.

You need to tell the reader what was done. This means describing the research methods and explaining your choice. This will include information on the following:

• Are your methods qualitative or quantitative... or both? And if so, why?
• Who (if any) are the participants?
• Are you analysing any documents, systems, organisations? If so what are they and why are you analysing them?
• What did you do first, second, etc?
• What ethical considerations are there?

It is a common style convention to write what was done rather than what you did, and write it so that someone else would be able to replicate your study.

Here you describe what you have found out. You need to identify the most significant patterns in your data, and use tables and figures to support your description. Your tables and figures are a visual representation of your findings, but remember to describe what they show in your writing. There should be no critical analysis in this part (unless you have combined results and discussion sections).

Here you show the significance of your results or findings. You critically analyse what they mean, and what the implications may be. Talk about any limitations to your study, evaluating the strengths and weaknesses of your own research, and make suggestions for further studies to build on your findings. In this section, your supervisor will expect you to dig deep into your findings and critically evaluate what they mean in relation to previous studies, theories, views and opinions.

This is a summary of your project, reminding the reader of the background to your study, your objectives, and showing how you met them. Do not include any new information that you have not discussed before.

This is the list of all the sources you have cited in your dissertation. Ensure you are consistent and follow the conventions for the particular referencing system you are using. (Note: you shouldn't include books you've read but do not appear in your dissertation).

Include any extra information that your reader may like to read. It should not be essential for your reader to read them in order to understand your dissertation. Your appendices should be labelled (e.g. Appendix A, Appendix B, etc). Examples of material for the appendices include detailed data tables (summarised in your results section), the complete version of a document you have used an extract from, etc.

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

I am finding this helpful. Thank You.

It is very useful.

Glad you found it useful Adil!

I was a useful post i would like to thank you

Glad you found it useful! 🙂

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• How it works

Chapter 3 – Dissertation Methodology (example)

Disclaimer: This is not a sample of our professional work. The paper has been produced by a student. You can view samples of our work here . Opinions, suggestions, recommendations and results in this piece are those of the author and should not be taken as our company views.

Type of Academic Paper – Dissertation Chapter

Academic Subject – Marketing

Word Count – 3017 words

Introduction

The current chapter presents developing the research methods needed to complete the experimentation portion of the current study. The chapter will discuss in detail the various stages of developing the methodology of the current study. This includes a detailed discussion of the philosophical background of the research method chosen. In addition to this, the chapter describes the data collection strategy, including the selection of research instrumentation and sampling. The chapter closes with a discussion on the analysis tools used to analyse the data collected.

Selecting an Appropriate Research Approach

Creswall (2013) stated that research approaches are plans and procedures that range from steps, including making broad assumptions to detailed methods of data collection, analysis, and interpretation. The several decisions involved in the process are used to decide which approach should be used in a specific study that is informed using philosophical assumptions brought to the study (Creswall 2013). Included in this are procedures of inquiry or research designs and specific research methods used for data collection, its analysis, and finally, its interpretation. However, Guetterman (2015); Lewis (2015); and Creswall (2013) argue that the selection of the specific research approach is based on the nature of the research problem, or the issue that is being addressed by any study, personal experiences of the researchers’, and even the audience for which the study is being developed for.

There are many ways to customise research approaches to develop an approach most suited for a particular study. However, the main three categories with which research approaches are organised include; qualitative, quantitative, and mixed research methods. Creswall (2013) comments that all three approaches are not considered so discrete or distinct from one another. Creswall (2013) states, “qualitative and quantitative approaches should not be viewed as rigid, distinct categories, polar opposite, or dichotomies” (p.32). Newmand and Benz (1998) pointed out that quantitative and qualitative approaches instead represent different ends on a continuum since a study “tends” to be more quantitative than qualitative or vice versa. Lastly, mixed methods research resides in the middle of the continuum as it can incorporate elements and characteristics of both quantitative and qualitative approaches. Lewis (2015) points out that the main distinction that is often cited between quantitative and qualitative research is that it is framed in terms of using numbers rather than words; or using closed-ended questions for quantitative hypotheses over open-ended questions for qualitative interview questions. Guetterman (2015) points out that a clearer way of viewing gradations of differences between the approaches is to examine the basic philosophical assumptions brought to the study, the kinds of research strategies used, and the particular methods implemented in conducting the strategies.

Underlying Philosophical Assumptions

An important component of defining the research approach involves philosophical assumptions that contribute to the broad research approach of planning or proposing to conduct research. It involves the intersection of philosophy, research designs and specific methods as illustrated in Fig. 1 below.

Figure 3.2-1- Research Onion (Source; Saunders and Tosey 2013)

Slife and Williams (1995) have argued that philosophical ideas have remained hidden within the research. However, they still play an influential role in the research practice, and it is for this reason that it is most identified. Various philosophical assumptions are used to construct or develop a study. Saunders et al. (2009) define research philosophy as a belief about how data about a phenomenon should be gathered, analysed and used. Saunders et al. (2009) identify common research philosophies such as positivism, realism, interpretivism, subjectivism, and pragmatism. Dumke (2002) believes that two views, positivism and phenomenology, mainly characterise research philosophy.

Positivism reflects acceptance in adopting the philosophical stance of natural scientists (Saunders, 2003). According to Remenyi et al. (1998), there is a greater preference in working with an “observable social reality” and that the outcome of such research can be “law-like” generalisations that are the same as those which are produced by physical and natural scientists. Gill and Johnson (1997) add that it will also emphasise a high structure methodology to allow for replication for other studies. Dumke (2002) agrees and explains

that a positivist philosophical assumption produces highly structured methodologies and allows for generalisation and quantification of objectives that can be evaluated by statistical methods. For this philosophical approach, the researcher is considered an objective observer who should not be impacted by or impact the subject of research.

On the other hand, more phenomenological approaches agree that the social world of business and management is too complex to develop theories and laws similar to natural sciences. Saunders et al. (2000) argue that this is the reason why reducing observations in the real world to simple laws and generalisations produces a sense of reality which is a bit superficial and doesn’t present the complexity of it.

The current study chooses positivistic assumptions due to the literature review’s discussion of the importance of Big Data in industrial domains and the need for measuring its success in the operations of the business. The current study aims to examine the impact that Big Data has on automobile companies’ operations. To identify a positive relationship between Big Data usage and beneficial business outcomes, the theory needs to be used to generate hypotheses that can later be tested of the relationship which would allow for explanations of laws that can later be assessed (Bryman and Bell, 2015).

Selecting Interpretive Research Approach

Interpretive research approaches are derived from the research philosophy that is adopted. According to Dumke (2002), the two main research approaches are deductive and inductive. The inductive approach is commonly referred to when theory is derived from observations. Thus, the research begins with specific observations and measures. It is then from detecting some pattern that a hypothesis is developed. Dumke (2002) argues that researchers who use an inductive approach usually work with qualitative data and apply various methods to gather specific information that places different views. From the philosophical assumptions discussed in the previous section, it is reasonable to use the deductive approach for the current study. It is also considered the most commonly used theory to establish a relationship between theory and research. The figure below illustrates the steps used for the process of deduction.

Data Collection

• confirmed or rejected
• Revision of theory

Based on what is known about a specific domain, the theoretical considerations encompassing it a hypothesis or hypotheses are deduced that will later be subjected to empirical enquiry (Daum, 2013). Through these hypotheses, concepts of the subject of interest will be translated into entities that are rational for a study. Researchers are then able to deduce their hypotheses and convert them into operational terms.

Hire an Expert Dissertation Chapter Writer

Orders completed by our expert writers are

• Formally drafted in an academic style
• Free Amendments and 100% Plagiarism Free – or your money back!
• 100% Confidential and Timely Delivery!
• Free anti-plagiarism report
• Appreciated by thousands of clients. Check client reviews

Justifying the Use of Quantitative Research Method

Saunders (2003) notes that almost all research will involve some numerical data or even contain data quantified to help a researcher answer their research questions and meet the study’s objectives. However, quantitative data refers to all data that can be a product of all research strategies (Bryman and Bell, 2015; Guetterman, 2015; Lewis, 2015; Saunders, 2003). Based on the philosophical assumptions and interpretive research approach, a quantitative research method is the best suited for the current study. Haq (2014) explains that quantitative research is about collecting numerical data and then analysing it through statistical methods to explain a specific phenomenon. Mujis (2010) defends the use of quantitative research because, unlike qualitative research, which argues that there is no pre-existing reality, quantitative assumes that there is only a single reality about social conditions that researchers cannot influence in any way. Also, qualitative research is commonly used when there is little to no knowledge of a phenomenon, whereas quantitative research is used to find the cause and effect relationship between variables to either verify or nullify some theory or hypothesis (Creswall 2002; Feilzer 2010; Teddlie and Tashakkori 2012).

Selecting an Appropriate Research Strategy

There are many strategies available to implement in a study, as evidenced from Fig. 1. There are many mono-quantitative methods, such as telephone interviews, web-based surveys, postal surveys, and structured questionnaires (Haq 2014). Each instrument has its own pros and cons in terms of quality, time, and data cost. Brymand (2006); Driscoll et al. (2007); Edwards et al. (2002); and Newby et al. (2003) note that most researchers use structured questionnaires for data collection they are unable to control or influence respondents, which leads to low response rates but more accurate data obtained. Saunders and Tosey (2015) have argued that quantitative data is simpler to obtain and more concise to present. Therefore, the current study uses a survey-based questionnaire (See Appendix A).

Justifying the use of Survey Based Questionnaire

Surveys are considered the most traditional forms of research and are used in non-experimental descriptive designs that describe some reality. Survey-based questionnaires are often restricted to a representative sample of a potential group of the study’s interest. In this case, it is the executives currently working for automobile companies in the UK. The survey instrument is then chosen for its effectiveness at being practical and inexpensive (Kelley et al., 2003). Due to the philosophical assumptions, interpretive approach, and methodological approach, the survey design for the current study is considered the best instrument in line with these premises, besides being cost-effective.

Empirical Research Methodology

Research design.

This section describes how research is designed to use the techniques used for data collection, sampling strategy, and data analysis for a quantitative method. Before going into the strategies of data collection and analysis, a set of hypotheses were developed.

Hypotheses Development

The current study uses a quantitative research approach, making it essential to develop a set of hypotheses that will be used as a test standard for the mono-method quantitative design. The following are a set of hypotheses that have been developed from the examination of the literature review.

H1- The greater the company’s budget for Big Data initiatives (More than 1 million GBP), the greater its ability to monetise and generate new revenues.

H2- The greater the company’s budget for Big Data initiatives (More than 1 million GBP) the more decrease in expenses in found.

H3- The greatest impact of Big Data on a company is changing the way business is done.

H4- Big Data integrating with a company has resulted in competitive significance.

H5- The analytical abilities of a company allows for achieved measurable results.

H6- Investing in Big Data will lead to highly successful business results.

H7- A business’s operations function is fuelling Big Data initiatives and effecting change in operations.

H8- The implementation of Big Data in the company has positive impacts on business.

This section includes the sampling method used to collect the number of respondents needed to provide information, then analysed after collection.

Sampling Method

Collis (2009) explains that there are many kinds of sampling methods that can be used for creating a specific target sample from a population. This current study uses simple random sampling to acquire respondents with which the survey will be conducted. Simple random sampling is considered the most basic form of probability sampling. Under the method, elements are taken from the population at random, with all elements having an equal chance of being selected. According to () as of 2014, there are about thirty-five active British car manufacturers in the UK, each having an employee population of 150 or more. This is why the total population of employees in car manufacturers is estimated to be 5,250 employees. The sample, therefore, developed used the following equation;

2  ×   (1 −   )

+(   2 × (1−  ) )  2

Where; N is the population size,  e  is the margin of error (as a decimal),  z  is confidence level (as a z-score), and  p  is percentage value (as a decimal). Thus, the sample size is with a normal distribution of 50%. With the above equation, a population of 5,250; with a 95% confidence level and 5% margin of error, the total sample size needed for the current equals 300. Therefore, N=300, which is the sample size of the current study.

The survey develops (see Appendix A) has a total of three sections, A, B, and C, with a total of 39 questions. Each section has its own set of questions to accomplish. The survey is a mix of closed-end questions that look to comprehend the respondents’ demographic makeup, the Big Data initiatives of the company, and the impact that Big Data was having on their company. The survey is designed to take no longer than twenty minutes. The survey was constructed on Survey Monkey.com, and an online survey provided website. The survey was left on the website for a duration of 40 days to ensure that the maximum number of respondents were able to answer the survey. The only way that the survey was allowed for a respondent is if they passed a security question as if they were working for an automobile company in the UK when taking the survey. Gupta et al. (2004) believe that web surveys are visual stimuli, and the respondent has complete control about whether or how each question is read and understood. That is why Dillman (2000) argued that web questionnaires are expected to resemble those taken through the mail/postal services closely.

Data Analysis

The collected data is then analysed through the Statistical Package for Social Science (SPSS) version 24 for descriptive analysis. The demographic section of the survey will be analysed using descriptive statistics. Further analysis of the data includes regression analysis. Simple regression analysis includes only one independent variable and one dependent variable. Farrar and Glauber (1967) assert that the purpose of regression analysis is to estimate the parameters of dependency, and it should not be used to determine the interdependency of a relationship.

Need a Dissertation Chapter On a Similar Topic?

Conclusions.

The chapter provides a descriptive and in-depth discussion of the methods involved in the current study’s research. The current study is looking towards a quantitative approach that considers positivism as its philosophical undertaking, using deductive reasoning for its interpretive approach, is a mono-quantitative method that involves the use of a survey instrument for data collection. The methodology chapter also provided the data analysis technique, which is descriptive statistics through frequency analysis and regression analysis.

Examples of results;

Question 8- Of these staff, are mostly working in or for your consumer-facing (B2C) businesses, your commercial or wholesale (B2B) businesses, or both?

Based on the illustration, nineteen (19) respondents indicated that 501-1000 employees are dedicated to analytics for both B2B and B2C. The category of using Big Data analytics for both B2B and B2C comprises the most agreement of respondents with 72 of 132 indicated.

The figure above represents the respondents’ answers to their automobile company’s plan for measuring Big Data’s success. Of the 132 participants, 44.70 per cent responded that the company is planning on using quantitative metrics associated with business performance to analyse if Big Data is actually successful. Another, 30.30 per cent indicated that their company was planning on using qualitative metrics tied to business performance. Using business performance to analyse the success of Big Data is coherent to the results of the literature review that indicated previous studies of doing such. As an automobile company, they need to know the results of using Big Data analytics, and that is only by using business performance indicators regardless of being qualitative or quantitative.

Fig. 4.3-6 portrays the response of participants in regards to actually achieving measurable results from Big Data. According to 68.18 per cent of respondents, the company that they worked for did indeed show measurable results from their investments in Big Data. However, 31.82 per cent indicated that there was indeed no measurable result in investing in Big Data.

Bryman, A., Bell, E., 2015. Business Research Methods. Oxford University Press.

Daum, P., 2013. International Synergy Management: A Strategic Approach for Raising Efficiencies in the Cross-border Interaction Process. Anchor Academic Publishing (aap_verlag).

Dümke, R., 2002. Corporate Reputation and its Importance for Business Success: A European

Perspective and its Implication for Public Relations Consultancies. diplom.de.

Guetterman, T.C., 2015. Descriptions of Sampling Practices Within Five Approaches to Qualitative Research in Education and the Health Sciences. Forum Qualitative Sozialforschung /

Forum: Qualitative Social Research 16.

Haq, M., 2014. A Comparative Analysis of Qualitative and Quantitative Research Methods and a Justification for Adopting Mixed Methods in Social Research (PDF Download Available).

ResearchGate 1–22. doi:http://dx.doi.org/10.13140/RG.2.1.1945.8640

Kelley, K., Clark, B., Brown, V., Sitzia, J., 2003. Good practice in the conduct and reporting of survey research. Int J Qual Health Care 15, 261–266. doi:10.1093/intqhc/mzg031

Lewis, S., 2015. Qualitative Inquiry and Research Design: Choosing Among Five Approaches.

Health Promotion Practice 16, 473–475. doi:10.1177/1524839915580941

Saunders, M., 2003. Research Methods for Business Students. Pearson Education India.

Saunders, M.N.K., Tosey, P., 2015. Handbook of Research Methods on Human Resource

Development. Edward Elgar Publishing.

DMCA / Removal Request

If you are the original writer of this Dissertation Chapter and no longer wish to have it published on the www.ResearchProspect.com then please:

Request The Removal Of This Dissertation Chapter

Frequently Asked Questions

How to write methodology chapter of a dissertation.

To write the methodology chapter of a dissertation:

• Describe research design & approach.
• Explain data collection methods.
• Justify chosen methods.
• Address limitations.
• Analyse data.
• Ensure replicability.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works