engineering thesis case study

For engineering, thesis readers are chosen by the student. It is the responsibility of the student to select their thesis readers and to ensure that the readers are committed. No readers are ever assigned. For Engineering only (non-joint) the thesis committee typically consists of the advisor and two more faculty from FAS/SEAS.

Turkic Interlingua: A Case Study of Machine Translation in Low-resource Languages, Jamshidbek Mirzakhalov. PDF. Automated Wound Segmentation and Dimension Measurement Using RGB-D Image, Chih-Yun Pai. PDF. Constructing Frameworks for Task-Optimized Visualizations, Ghulam Jilani Abdul Rahim Quadri. PDF

The thesis begins with the Guggenheim Museum case study, and then considers the San Roque Power Facility case study. The project delivery methods of both studies are evaluated in light of six basic delivery alternatives: general contractor, construction manager, multiple primes, design-build, turnkey and build-operate-transfer.

This book contains essays and case studies that are based upon materials that I prepared for "Project Evaluation", which I designed and taught for more than ten years as one of the required subjects in MIT's Department of Civil & Environmental Engineering. The subject was designed to fill a void in the education of civil engineering students,

Introduction. The introduction is very important as it sets the context for the report. Summarise the brief (your task), briefly outline the case and focus on its significance for the reader, state the report's aim (s) and describe how the report is organised. Readers use the introduction to locate the aim of your report and to decide which ...

Master of engineering thesis written by BOGNOU FOFOU Adrian; ENSTP, Yaoundé. Department of Civil Engineering, option: Structural Engineering 2020/2021 1 MECHANISMS AND FUNCTIONALITY OF MOBILE BRIDGES. CASE STUDY: BASCULE BRIDGE AT THE VIAREGGIO HARBOUR IN ITALY A thesis submitted in partial fulfilment of the requirement for the degree of Master of

Dissertation: Case Study on the Development of Engineering Design Modification Projects for U.S. Nuclear Power Plants: A Knowledge Retention Tool in Support of the Longevity and Resilience of the Nuclear Power Industry, Pamela M. Torres-Jiménez. Theses/Dissertations from 2017 PDF

This article presents learning strategies to formulate a research thesis for engineering undergraduate programs, with an emphasis on the use of information and communication technologies (ICTs) toward a University Education 4.0 paradigm. ... the experience of preparing a thesis by solving a problem from a real case study gives professionals the ...

Types of case study. Your course may include all the information you require for the case study and in this case all students would be analysing the same case study. This may take the form of an historical case study where you analyse the causes and consequences of a situation and discuss the lessons learned. You are essentially outside the ...

How to do a thorough literature review for a dissertation, thesis, applied project or grant application. ... Local acceptance of wind energy: factors of success identified in French and German case studies. Energy Policy 35(5):2751-2760. In this case, the literature review is a separate, labeled section appearing between the introduction and ...

An Automated Framework for Connected Speech Evaluation of Neurodegenerative Disease: A Case Study in Parkinson's Disease, Sai Bharadwaj Appakaya. PDF. Investigation of CoO ATO for Solar Cells and Infrared Sheaths, Manopriya Devisetty Subramanyam. PDF. Thermal Management of Lithium-ion Batteries Using Supercapacitors, Sanskruta Dhotre. PDF

Langdell stated that using cases would develop students' understanding "via induction from a review of those appellate court decisions in which the principles first took tangible form" (Garvin, 2003). Case studies also formed the instructional method at the Harvard Business School in 1908 (Merseth, 1991).

Department of Civil and Environmental Engineering Division of Construction Management. Chalmers University of Technology SE-412 96 Göteborg Sweden Telephone: + 46 (0)31-772 1000. Sweden 2011. Risk Management Practices in a Construction Project - a case study. Master of Science Thesis in the Master's Programme.

Demonstrating Set-Based Design Techniques- A UAV Case study, Colin Small. PDF. Configuring Traditional Multi-Dock, Unit-Load Warehouses, Mahmut Tutam. PDF. Convergent Set-Based Design in Integrated Analysis of Alternatives: Designing Engineered Resilient Systems, Zephan Wright Wade. PDF

The subject of this thesis is to present a complete study of high-rise building in terms of structural design and analysis, with an application on a 24 stories building.

Using machine learning for long-term track bed behaviour analysis and maintenance scheduling optimisation . Popov, Konstantin; Pankaj (The University of Edinburgh, 2024-03-13) The purpose of this study is to present a novel approach for evaluating railway track quality using machine learning algorithms. The work will focus mainly on track ...

Theses/Dissertations from 2023. PDF. Development of A Hydrometallurgical Process for the Extraction of Cobalt, Manganese, and Nickel from Acid Mine Drainage Treatment Byproduct, Alejandro Agudelo Mira. PDF. Selective Recovery of Rare Earth Elements from Acid Mine Drainage Treatment Byproduct, Zeynep Cicek. PDF.

Abstract— In this paper we have discussed the concept of Value Engineering, its job plan and the effective implementation of it through a case study. Efforts have been put into the articulation of the paper to make it coherent which can be easily perceivable. A case study has been discussed in this paper involving a part used in the medical ...

Reverse Engineering: A Cognitive Approach, a Case Study and a Tool By Iyad Zayour Thesis Presented to the Faculty of Graduate and Postdoctoral Studies in partial fulfillment of the requirements for the degree Doctor of Philosophy (Computer Science) Ottawa-Carleton Institute for Computer Science University of Ottawa Ottawa, Ontario, K1N 6N5 Canada

Neural networks (NNs) effectively address the challenges of engineering design optimization by using data-driven models, thus reducing computational demands. However, their effectiveness depends heavily on hyperparameter optimization (HPO), which is a global optimization problem. While traditional HPO methods, such as manual, grid, and random search, are simple, they often fail to navigate the ...

University of Southern Mississippi

Although case studies have been discussed extensively in the literature, little has been written about the specific steps one may use to conduct case study research effectively (Gagnon, 2010; Hancock & Algozzine, 2016).Baskarada (2014) also emphasized the need to have a succinct guideline that can be practically followed as it is actually tough to execute a case study well in practice.

McMaster University, West Hamilton, Ontario, Canada. Qualitative case study methodology prov ides tools for researchers to study. complex phenomena within their contexts. When the approach is ...

A thesis submitted to the school of Research and Graduate Studies of Bahir Dar Institute of Technology, Bahir Dar University, in partial fulfillment of the requirements for the degree of Master of Science in Power System Engineering in Electrical and Computer Engineering Faculty. Advisor Name: Dr. Tassew Tadiwos August 2022 Bahir Dar, Ethiopia

Theses/Dissertations from 2020. PDF. Experimental study on residual axial strength capacity of CFRP wrapped concrete cylinder (full and partial Confinement) after exposure to elevated temperature, John Emmanuel C. Endaya. PDF. Effect of coconut shell ash on pore water pressure changes in sand, Gabriel Jose G. Lim.

While definitions of what constitutes ethical engineering practice are varied in the literature and have been debated theoretically by scholars, this study adopts an empirical approach to understand how experts in engineering ethics conceptualize ethical behaviors in engineering. Methods: This dissertation study uses a Delphi process to build ...

A Design MSc dissertation module at Brunel University London was used as a case study to assess the extent to which technologies, industry sectors, and UN SDGs are represented across student projects. Dissertation projects provide students with an opportunity to pursue a piece of interdisciplinary research driven by a contemporary design challenge.

This thesis further investigates the Collective System Design Language, offering a communication tool for design and an approach to assess effectiveness before implementation.This thesis highlights two case studies: Shuttleworth (manufacturing industry) and the Purdue University Fort Wayne Student Success Standard Process Lifecycle.The impact ...

All of Technocracy's articulations--philosophical, methodological, theoretical and practical, represent the guidance of social knowledge by the technical interest. This study will help clarify why at times the socio-economic problem is conceived predominantly in technocratic fashion, as principally a physical, technical, or engineering problem.

Geotechnical engineering data are usually small-sample and high-dimensional, which brings a lot of challenges in predictive modeling. This paper uses a typical high-dimensional and small-sample swell pressure (P<SUB>s</SUB>) dataset to explore the possibility of using multi-algorithm hybrid ensemble and dimensionality reduction methods to mitigate the uncertainty of soil parameter prediction ...