writing your thesis in latex

because LaTeX matters

Writing a thesis in latex.

Writing a thesis is a time-intensive endeavor. Fortunately, using LaTeX, you can focus on the content rather than the formatting of your thesis. The following article summarizes the most important aspects of writing a thesis in LaTeX, providing you with a document skeleton (at the end) and lots of additional tips and tricks.

Document class

The first choice in most cases will be the report document class:

See here for a complete list of options. Personally, I use draft a lot. It replaces figures with a box of the size of the figure. It saves you time generating the document. Furthermore, it will highlight justification and hyphenation errors ( Overfull \hbox ).

Check with your college or university. They may have an official or unofficial template/class-file to be used for writing a thesis.

Again, follow the instructions of your institution if there are any. Otherwise, LaTeX provides a few basic command for the creation of a title page.

Use \today as \date argument to automatically generate the current date. Leave it empty in case you don’t want the date to be printed. As shown in the example, the author command can be extended to print several lines.

For a more sophisticated title page, the titlespages package has a nice collection of pre-formatted front pages. For different affiliations use the authblk package, see here for some examples.

Contents (toc/lof/lot)

Nothing special here.

The tocloft package offers great flexibility in formatting contents. See here for a selection of possibilities.

Often, the page numbers are changed to roman for this introductory part of the document and only later, for the actual content, arabic page numbering is used. This can be done by placing the following commands before and after the contents commands respectively.

LaTeX provides the abstract environment which will print “Abstract” centered as a title.

The actual content

The most important and extensive part is the content. I strongly suggest to split up every chapter into an individual file and load them in the main tex-file.

In thesis.tex:

In chapter1.tex:

This way, you can typeset single chapters or parts of the whole thesis only, by commenting out what you want to exclude. Remember, the document can only be generated from the main file (thesis.tex), since the individual chapters are missing a proper LaTeX document structure.

See here for a discussion on whether to use \input or \include .

Bibliography

The most convenient way is to use a bib-tex file that contains all your references. You can download bibtex items for articles, books, etc. from Google scholar or often directly from the journal websites.

Two packages are commonly used to personalize bibliographies, the newer biblatex and the natbib package, which has been around for many years. These packages offer great flexibility in customizing the look of a bibliography, depending on the preference in the field or the author.

Other commonly used packages

• graphicx : Indispensable when working with figures/graphs.
• subfig : Controlling arrangement of several figures (e.g. 2×2 matrix)
• minitoc : Adds mini table of contents to every chapter
• nomencl : Generate and format a nomenclature
• listings : Source code printer for LaTeX
• babel : Multilingual package for standard document classes
• fancyhdr : Controlling header and footer
• hyperref : Hypertext links for LaTeX
• And many more

Minimal example code

I’m aware that this short post on writing a thesis only covers the very basics of a vast topic. However, it will help you getting started and focussing on the content of your thesis rather than the formatting of the document.

Share this:

16 comments.

8. June 2012 at 7:09

I would rather recommend a documentclass like memoir or scrreprt (from KOMA-Script), since they are much more flexible than report.

8. June 2012 at 8:12

I agree, my experience with them is limited though. Thanks for the addendum. Here is the documentation: memoir , scrreprt (KOMA script)

8. June 2012 at 8:02

Nice post Tom. I’m actually writing a two-part (or three) on Writing the PhD thesis: the tools . Feel free to comment, I hope to update it as I write my thesis, so any suggestions are welcome.

8. June 2012 at 8:05

Thanks for the link. I just saw your post and thought I should really check out git sometimes :-). Best, Tom.

8. June 2012 at 8:10

Yes, git is awesome. It can be a bit overwhelming with all the options and commands, but if you’re just working alone, and probably on several machines, then you can do everything effortlessly with few commands.

11. June 2012 at 2:15

That’s what has kept me so far. But I’ll definitely give it a try. Thanks!

8. June 2012 at 8:08

What a great overview. Thank you, this will come handy… when I finally get myself to start writing that thesis 🙂

8. June 2012 at 14:12

Thanks and good luck with your thesis! Tom.

9. June 2012 at 4:08

Hi, I can recommend two important packages: lineno.sty to insert linenumbers (really helpful in the debugging phase) and todonotes (allows you to insert todo-notes for things you still have to do.)

11. June 2012 at 0:48

Thanks Uwe! I wrote an article on both, lineno and todonotes . Here is the documentation: lineno and todonotes for more details.

12. June 2012 at 15:51

Thanks for the post, i’m currently writing my master thesis 🙂

A small note: it seems that subfig is deprecated for the subcaption package: https://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions#Subfloats

12. June 2012 at 16:05

Hey, thanks for the tip. Too bad they don’t say anything in the documentation apart from the fact that the packages are not compatible.

1. August 2012 at 21:11

good thesis template can be also found here (free): http://enjobs.org/index.php/downloads2

including living headers, empty pages, two-sided with front and main matter as well as a complete structure

2. August 2012 at 11:03

Thanks for the link to the thesis template!

15. November 2012 at 22:21

Hi Tom, I’m writing a report on spanish in LaTex, using emacs, auctex, aspell (~170pags. ~70 files included by now) and this blog is my savior every time because I’m quite new with all these.

The question: Is there anyway (other than \- in every occurrence) to define the correct hyphenation for accented words (non english characters like é)? I have three o four accented words, about the subject of my report, that occur near 100 times each, across several files, and the \hyphenation{} command can’t handle these.

20. November 2012 at 3:47

I was wondering what packages you load in your preamble. For a better hyphenation (and easier typing), you should use these packages:

See here for more details.

If this doesn’t help, please provide a minimal working example to illustrate the problem.

Thanks, Tom.

Leave a Reply Cancel reply

No Search Results

How to Write a Thesis in LaTeX (Part 5): Customising Your Title Page and Abstract

Part 1 | Part 2 | Part 3 | Part 4 | Part 5

Author: Josh Cassidy (August 2013)

This five-part series of articles uses a combination of video and textual descriptions to teach the basics of writing a thesis using LaTeX. These tutorials were first published on the original ShareLateX blog site during August 2013; consequently, today's editor interface (Overleaf) has changed considerably due to the development of ShareLaTeX and the subsequent merger of ShareLaTeX and Overleaf. However, much of the content is still relevant and teaches you some basic LaTeX—skills and expertise that will apply across all platforms.

In the previous post we looked at adding a bibliography to our thesis using the biblatex package . In this, the final post of the series, we're going to look at customising some of the opening pages. In the first video we made a rather makeshift title page using the \maketitle command and by using an \includegraphics command in the \title command. Although this works, it doesn't give us as much flexibility as we may want.

The Title Page

A much better way to do this is to use the titlepage environment. We'll do this in a separate .tex file and then input it. The first thing we'll do is enclose everything in the title page within the center environment so it's all aligned to the centre. Next we need to instruct L a T e X to leave a gap between the top of the page and the first line of text. To do this we use the \vspace command followed by a length. We also need to add an asterisk into the command to make sure L a T e X doesn't decide to ignore the command. Next we'll add the thesis title in bold font using the \textbf command. To leave a gap between this and the next line of text we use the \vspace command again, this time without the asterisk. Next we'll add in a subtitle followed by some more vertical space and then the author name in bold font. This concludes what we want at the top of the title page—the rest of the content we'll add at the bottom of the title page.

To separate these two sections out we'll use the \vfill command which will automatically add in the amount of vertical space needed for the content to fill the page. Next we'll add in a line of text to specify what degree the thesis is being submitted for. The double backslash is used to create a new line. We'll then add more space before adding in the university logo specifying it's width as a fraction of the text width. Finally we'll add in some information about the university and the date.

Now in the main .tex file we can replace the \maketitle command with an input command linked to our new title page. If we now compile the code we can see all the items have been correctly processed:

However, the text is quite small so we'll go back and change the font sizes. To do this we'll use one of the simple font-sizing commands. There are ten of these to choose from, ranging from smallest to largest they are:

Let's make the title as big as it can be (using these simple commands) by choosing \Huge . We'll then make the subtitle two steps smaller using \large . When we use one of these commands they affect all the text in it's scope. Therefore in it's current state all the remaining text on the page will appear in the size of the subtitle. We'll keep it like this for the author name and degree title but we'll drop down one size for the university details and the date:

The abstract

We can also customise other pages, such as the abstract. Instead of using an unnumbered chapter, we'll create a new .tex file, customise the layout and then input it. At the top of this file we need to change the page style to plain in order to stop the headers being added in. Now in a similar way to the title page we'll add in some custom titles and then the abstract text.

This is what it will look like added in:

This concludes our series on writing a basic thesis. If you want to play around with the thesis we've created in this series you can open the project in Overleaf .

All articles in this series

• Part 1: Basic Structure ;
• Part 2: Page Layout ;
• Part 3: Figures, Subfigures and Tables ;
• Part 4: Bibliographies with BibLaTeX ;
• Part 5: Customising Your Title Page and Abstract .
• Documentation Home
• Learn LaTeX in 30 minutes

Overleaf guides

• Creating a document in Overleaf
• Uploading a project
• Copying a project
• Creating a project from a template
• Using the Overleaf project menu
• Including images in Overleaf
• Exporting your work from Overleaf
• Working offline in Overleaf
• Using Track Changes in Overleaf
• Using bibliographies in Overleaf
• Sharing your work with others
• Using the History feature
• Debugging Compilation timeout errors
• How-to guides
• Guide to Overleaf’s premium features

LaTeX Basics

• Creating your first LaTeX document
• Choosing a LaTeX Compiler
• Paragraphs and new lines
• Bold, italics and underlining

Mathematics

• Mathematical expressions
• Subscripts and superscripts
• Brackets and Parentheses
• Fractions and Binomials
• Aligning equations
• Spacing in math mode
• Integrals, sums and limits
• Display style in math mode
• List of Greek letters and math symbols
• Mathematical fonts
• Using the Symbol Palette in Overleaf

Figures and tables

• Inserting Images
• Positioning Images and Tables
• Lists of Tables and Figures
• Drawing Diagrams Directly in LaTeX
• TikZ package

References and Citations

• Bibliography management with bibtex
• Bibliography management with natbib
• Bibliography management with biblatex
• Bibtex bibliography styles
• Natbib bibliography styles
• Natbib citation styles
• Biblatex bibliography styles
• Biblatex citation styles
• Multilingual typesetting on Overleaf using polyglossia and fontspec
• Multilingual typesetting on Overleaf using babel and fontspec
• International language support
• Quotations and quotation marks

Document structure

• Sections and chapters
• Table of contents
• Cross referencing sections, equations and floats
• Nomenclatures
• Management in a large project
• Multi-file LaTeX projects
• Lengths in L a T e X
• Headers and footers
• Page numbering
• Paragraph formatting
• Line breaks and blank spaces
• Text alignment
• Page size and margins
• Single sided and double sided documents
• Multiple columns
• Code listing
• Code Highlighting with minted
• Using colours in LaTeX
• Margin notes
• Font sizes, families, and styles
• Font typefaces
• Supporting modern fonts with X Ǝ L a T e X

Presentations

• Environments

Field specific

• Theorems and proofs
• Chemistry formulae
• Feynman diagrams
• Molecular orbital diagrams
• Chess notation
• Knitting patterns
• CircuiTikz package
• Pgfplots package
• Typesetting exams in LaTeX
• Attribute Value Matrices

Class files

• Understanding packages and class files
• List of packages and class files
• Writing your own package
• Writing your own class

Advanced TeX/LaTeX

• In-depth technical articles on TeX/LaTeX

Have you checked our knowledge base ?

Message sent! Our team will review it and reply by email.

Overleaf for Scholarly Writing & Publication: LaTeX Theses and Dissertations

• Reference Managers and Overleaf
• Adding Graphs, Tables, and Images
• Using Templates on Overleaf
• LaTeX Theses and Dissertations

LaTeX Theses and Dissertatons

Tips and tools for writing your LaTeX thesis or dissertation in  Overleaf, including templates, managing references , and getting started guides.

Managing References

BibTeX  is a file format used for lists of references for  LaTeX  documents. Many citation management tools support the ability to export and import lists of references in .bib format. Some reference management tools can generate  BibTeX  files of your library or folders for use in your  LaTeX  documents.

LaTeX on Wikibooks   has a  Bibliography Management  page.

Find list of BibTeX styles available on Overleaf   here

View a video tutorial on how to include a bibliography using BibTeX  here

Collaborate with Overleaf

Collaboration tools

Every project you create has a secret link. Just send it to your co-authors, and they can review, comment and edit. Overleaf synchronizes changes from all authors, so everyone always has the latest version. More advanced tools include protected projects and integration with Git.

Collaborate online and offline with Overleaf and Git

Protected projects with Overleaf Pro

Getting Started with Your Thesis or Dissertation

How to get started writing your thesis in LaTeX

Writing a thesis or dissertation in LaTeX can be challenging, but the end result is well worth it - nothing looks as good as a LaTeX-produced pdf, and for large documents it's a lot easier than fighting with formatting and cross-referencing in MS Word. Review this video from Overleaf to help you get started writing your thesis in LaTeX, using a standard thesis template from the  Overleaf Gallery .

You can  upload your own thesis template to the Overleaf Gallery   if your university provides a set of LaTeX template files or you may find your university's thesis template already in the Overleaf Gallery.

This video assumes you've used LaTeX before and are familiar with the standard commands (see our other  tutorial videos   if not), and focuses on how to work with a large project split over multiple files.

How to Write your Thesis/Dissertation in LaTeX: A Five-Part Guide

Five-Part LaTeX Thesis/Dissertation  Writing Guide

Part 1: Basic Structure   corresponding  video

Part 2: Page Layout   corresponding  video

Part 3: Figures, Subfigures and Tables   corresponding  video

Part 4: Bibliographies with Biblatex  corresponding  video

Part 5: Customizing Your Title Page and Abstract   corresponding  video

Link Your ORCID

Link yo ur  ORCiD  account  to your  Overleaf account  via the  ORCID @ CMU Portal

Open Knowledge Librarian

• << Previous: Using Templates on Overleaf
• Last Updated: Oct 4, 2023 9:31 AM
• URL: https://guides.library.cmu.edu/overleaf

Research Guides

Submit and publish your thesis.

• The Graduate Thesis: What is it?
• Thesis Defences
• Deadlines and Fees
• Formatting in MS Word

Formatting in LaTeX

• Making Thesis Accessible
• Thesis Embargo
• Review and Release
• Your Rights as an Author
• Re-using Third Party Materials
• Creative Commons Licenses for Theses
• Turning Thesis into an Article
• Turning Thesis into a Book
• Other Venues of Publication

For formatting instructions and requirements see the Formatting section of the School of Graduate Studies website. The thesis style template for LaTeX ( ut-thesis ) implements these requirements. You are not required to use the template, but using it will make most of the formatting requirements easier to meet.

►► Thesis template for LaTeX .

Below are some general formatting tips for drafting your thesis in LaTeX.  In addition, there are other supports available:

• Regular LaTeX workshops are offered via the library, watch the library workshop calendar at https://libcal.library.utoronto.ca/
• With questions about LaTeX formatting, contact Map and Data Library (MDL) using this form
• There are also great resources for learning LaTeX available via Overleaf

Many common problems have been solved on the TeX - LaTeX Stack Exchange Q & A Forum

LaTeX Template

To use the LaTeX and ut-thesis , you need two things: a LaTeX distribution (compiles your code), and an editor (where you write your code). Two main approaches are:

• Overleaf : is a web-based platform that combines a distribution (TeX Live) and an editor. It is beginner-friendly (minimal set-up) and some people prefer a cloud-based platform. However, manually uploading graphics and managing a bibliographic database can be tedious, especially for large projects like a thesis.
• A LaTeX distribution can be installed as described here . ut-thesis can then be installed either: a) initially, with the distribution; b) automatically when you try to compile a document using \usepackage{ut-thesis} ; or manually via graphical or terminal-based package manager for the distribution.
• The LaTeX distribution allows you to compile code, but provides no tools for writing (e.g. syntax highlighting, hotkeys, command completion, etc.). There are many editor options that provide these features. TeXstudio is one popular option.

Occasionally, the version of ut-thesis on GitHub  may be more up-to-date than the popular distributions (especially yearly TeX Live), including small bug fixes. To use the GitHub version, you can download the file ut-thesis.cls (and maybe the documentation ut-thesis .pdf ) and place it in your working directory. This will take priority over any other versions of ut-thesis on your system while in this directory.

LaTeX Formatting Tips

Here are a few tips & tricks for formatting your thesis in LateX.

Document Structure

Using the ut-thesis document class, a minimal example thesis might look like:

\documentclass{ut-thesis} \author {Your Name} \title {Thesis Title} \degree {Doctor of Philosophy} \department {LaTeX} \gradyear {2020} \begin {document}   \frontmatter   \maketitle   \begin {abstract}     % abstract goes here   \end {abstract}   \tableofcontents   \mainmatter   % main chapters go here   % references go here   \appendix   % appendices go here \end {document}

►►  A larger example is available on GitHub here .

You may want to consider splitting your code into multiple files. The contents of each file can then be added using \input{filename} .

The usual commands for document hierarchy are available like \chapter , \section , \subsection , \subsubsection , and \paragraph . To control which appear in the \tableofcontents , you can use \setcounter{tocdepth}{i} , where i = 2 includes up to \subsection , etc. For unnumbered sections, use \section* , etc. No component should be empty, such as \section{...} immediately followed by \subsection{...} .

Note: In the examples below, we denote the preamble vs body like:

preamble code --- body code

Tables & Figures

In LaTeX, tables and figures are environments called “floats”, and they usually don’t appear exactly where you have them in the code. This is to avoid awkward whitespace. Float environments are used like \begin{env} ... \end{env} , where the entire content ... will move with the float. If you really need a float to appear exactly “here”, you can use:

\usepackage{float} --- \begin{ figure}[H] ... \end {figure}

Most other environments (like equation) do not float.

A LaTeX table as a numbered float is distinct from tabular data. So, a typical table might look like:

\usepackage{booktabs} --- \begin {table}   \centering   \caption {The table caption}   \begin {tabular}{crll}     i &   Name & A &  B \\     1 &  First & 1 &  2 \\     2 & Second & 3 &  5 \\     3 &  Third & 8 & 13   \end {tabular} \end {table}

The & separates cells and \\ makes a new row. The {crll} specifies four columns: 1 centred, 1 right-aligned, and 2 left-aligned.

Fancy Tables

Some helpful packages for creating more advanced tabular data:

• booktabs : provides the commands \toprule , \midrile , and \bottomrule , which add horizontal lines of slightly different weights.
• multicol : provides the command \multicolumn{2}{r}{...} to “merge” 2 cells horizontally with the content ... , centred.
• multirow : provides the command \multirow{2}{*}{...} , to “merge” 2 cells vertically with the content ... , having width computed automatically (*).

A LaTeX figure is similarly distinct from graphical content. To include graphics, it’s best to use the command \includegraphics from the graphicx package. Then, a typical figure might look like:

\usepackage{graphicx} --- \begin {figure}   \centering   \includegraphics[width=.6 \textwidth ]{figurename} \end {figure}

Here we use .6\textwidth to make the graphic 60% the width of the main text.

By default, graphicx will look for figurename in the same folder as main.tex ; if you need to add other folders, you can use \graphicspath{{folder1/}{folder2/}...} .

The preferred package for subfigures is subcaption ; you can use it like:

\usepackage{subcaption} --- \begin {figure} % or table, then subtable below   \begin {subfigure}{0.5 \textwidth }     \includegraphics[width= \textwidth ]{figureA}     \caption {First subcaption}   \end {subfigure}   \begin {subfigure}{0.5 \textwidth }     \includegraphics[width= \textwidth ]{figureB}     \caption {Second subcaption}   \end {subfigure}   \caption {Overall figure caption} \end {figure}

This makes two subfigures each 50% of the text width, with respective subcaptions, plus an overall figure caption.

Math can be added inline with body text like $E = m c^2$ , or as a standalone equation like:

\begin {equation}   E = m c^2 \end {equation}

A complete guide to math is beyond our scope here; again, Overleaf provides a great set of resources to get started.

Cross References

We recommend using the hyperref package to make clickable links within your thesis, such as the table of contents, and references to equations, tables, figures, and other sections.

A cross-reference label can be added to a section or float environment using \label{key} , and referenced elsewhere using \ref{key} . The key will not appear in the final document (unless there is an error), so we recommend a naming convention like fig:diagram , tab:summary , or intro:back for \section{Background} within \chapter{Intro} , for example. We also recommend using a non-breaking space ~ like Figure~\ref{fig:diagram} , so that a linebreak will not separate “Figure” and the number.

You may need to compile multiple times to resolve cross-references (and citations). However, this occurs by default as needed in most editors.

The LaTeX package tikz provides excellent tools for drawing diagrams and even plotting basic math functions. Here is one small example:

\usepackage{tikz} --- \begin {tikzpicture}   \node [red,circle]  (a) at (0,0) {A};   \node [blue,square] (b) at (1,0) {B};   \draw [dotted,->]   (a) -- node[above]{ $ \alpha $ } (b); \end {tikzpicture}

Don’t forget semicolons after every command, or else you will get stuck while compiling.

There are several options for managing references in LaTeX. We recommend the most modern package: biblatex , with the biber backend.  A helpful overview is given here .

Assuming you have a file called references.bib that looks like:

@article{Lastname2020,   title = {The article title},   author = {Lastname, First and Last2, First2 and Last3 and First3},   journal = {Journal Name},   year = {2020},   vol = {99},   no = {1} } ...

then you can cite the reference Lastname2020 using biblatex like:

\usepackage[backend=biber]{biblatex} \addbibresource {references.bib} --- \cite {Lastname2020} ... \printbibliography

Depending on what editor you’re using to compile, this may work straight away. If not, you may need to update your compiling command to:

pdflatex main && biber main && pdflatex main && pdflatex main

Assuming your document is called main.tex . This is because biber is a separate tool from pdflatex . So in the command above, we first identify the cited sources using pdflatex , then collect the reference information using biber , then finish compiling the document using pdflatex , and then we compile once more in case anything got missed.

There are many options when loading biblatex to configure the reference formatting; it’s best to search the CTAN documentation for what you want to do.

Windows users may find that biber.exe or bibtex.exe get silently blocked by some antivirus software. Usually, an exception can be added within the antivirus software to allow these programs to run.

• << Previous: Formatting in MS Word
• Next: Making Thesis Accessible >>
• Last Updated: Sep 15, 2023 3:23 PM
• URL: https://guides.library.utoronto.ca/thesis

Library links

• Library Home
• Renew items and pay fines
• Library hours
• Engineering
• UT Mississauga Library
• UT Scarborough Library
• Information Commons
• All libraries

University of Toronto Libraries 130 St. George St.,Toronto, ON, M5S 1A5 [email protected] 416-978-8450 Map About web accessibility . Tell us about a web accessibility problem . About online privacy and data collection .

© University of Toronto . All rights reserved. Terms and conditions.

Connect with us

home | writing | TIL | now | about

Writing a thesis in latex.

This article is a guide to constructing a decent parent file for a thesis or dissertation compiled in Latex. The specific details implemented here, and included in the example files, are those set out by the guidelines for submission to the University of Nottingham, but can be easily amended to suit any sensible requirements.

Considerable attention has been paid to presenting the final document as a PDF file, which keeps the file size manageable (compared to postscript) and allows groovy add-ons such as hyperlinks and back-referencing. However, several hacks are required to attain good functionality from your PDF file and these can give the latex code a mysterious (and messy) appearance in places. While I highly recommend the inclusion of the PDF-related commands, they are not strictly necessary and can be ignored especially if you are new to Latex.

Note for Windows users

The code outlined below was designed and implemented on the unix system at Nottingham. For those of you unfortunate enough to be running a Windows box, a number of problems may arise when using the below code:

First off, not all the packages used will be present and will need to be installed. Probably the easiest way to do this is to google the package name with the extension .sty and save this file in the C:\VTEX\l2e\\ directory of your machine. Note that for the natbib package, you will also need to download the relevant .bst file, which in this case is unsrtnat.bst .

Also, many of the packages that are installed locally may need updating. For instance, the computers I have tested on both have old versions of the geometry and caption packages, which cause Latex to return errors. To resolve these problems, either download the latest versions, or remove the includefoot option from the geometry package and set the bottom margin to 1.4in.

Also, the code for compiling to PDF does not work so well in Windows, and so it is recommended that Windows users use the template without PDF code.

Requirements

The guidelines for theses to be submitted to the University of Nottingham specify that:

• the document should be presented on single-sided a4 paper and typeset in a double-spaced size 10-12 font;
• the left-hand margin should be at least 1.5 inches (4cm) to allow for binding;
• the other three margins should be at least 1 inch (2.5cm).

Other settings such as the way chapter headings are formatted, and whether headers are included, are not specified and are up to the user. In this case, we’ll install headers and tinker with the chapter formatting.

Template files

Here are the template files which this page explains:

• thesis_without_pdfcode.tex
• thesis_with_pdfcode.tex

The appearance of both these files on the printed page will be identical; however after compilation into PDF (see the section below) and opening in Adobe Acrobat (or a similar PDF reader), the advantages that come with the PDF format will be apparent.

• thesis_without_pdfcode.pdf
• thesis_with_pdfcode.pdf

The rest of this page is devoted to explaining the code in these files.

Document structure

The document begins in a standard and entirely self-explanatory manner.

Preamble: essential packages

Next, the essential packages are loaded:

where the geometry package has been loaded to allow the margins to be set in a neat and consistent way. The non-obvious option includefoot ensures that the footer (which only contains the pagenumber) is included in the page and is thus 1 inch above the bottom of the page. Note that this option is only available in recent versions of the package: if you’re using an old version and can’t/won’t upgrade, then remove the offending option and extend the bottom margin to 1.4in. headheight=13.6pt is included due to to ensure compatibility with the fancyhdr package (and is not required if you don’t use the fancyhdr package). Also quite essential is the natbib package:

where the various options ensure that references appear in the document as:

…boiled dog can do maths claims experimenter [10,12,15-18].

Alternative referencing styles are easily implemented, see the natbib help file for more details. In fact, to use the natbib package, you’ll have to read at least a few lines of the help file so you understand the difference between \citet and \citep , and I insist you do that now.

Preamble: custom captions (optional)

We now set the figure captions to be elegant and dignified:

Note that early versions of this package don’t support the margin= and tableposition= options; in this case, these trimmings will have to be ignored.

Preamble: custom fonts (optional)

You can also choose an alternative font for both the text and the mathematical characters. This can be achieved by:

Aside from mathpazo , there are several other fonts available, such as chancery , palatino and times (all loaded in the same way).

Preamble: fancy headers (optional)

Feeling a little devil-may-care? If so, you’ll probably want to install some elegant headers along each page. This is easily achieved through the fancyhdr package:

The final complicated-looking three lines simply ensure that the headings for appendices are formatted correctly. (Without these lines, what should read “Appendix A” is set as “Chapter A”.)

Preamble: customised chapter/section headings (optional)

We now make use of several customisation options that are bundled with the sectsty package.

These alter the appearance of the first page of each chapter to have a centred title, with the word “chapter” set in small capitals immediately above. Feel free to employ your own individual and highly refined tastes here in choosing your own chapter/section settings.

Preamble: pdf options (optional)

If you want to publish your thesis on the internet, or even just to email it to someone, then you’ll want to store it in the ubiquitous PDF format. Doing so offers some neat facilities, such as hyperlinking, which are implemented by the hyperref package:

There are various other options you can pass to your favourite PDF reader via the \hypersetup command, such as pdftitle , pdfauthor and pdfsubject ; however, they’re not really essential. Note that the hyperlink colours have all been set to black for consistent printing. Should you want to distribute your thesis over the web, then it would be advisable to set these colours to red or something similarly vibrant and exciting.

Things get a little messy now as a hack is required to ensure the hyperlinks actually jump to the right place.

No need to worry about this code, let’s just move straight on.

Preamble: page layout

We now set various parameters to alter the general page layout:

The first two of these commands alter the paragraph formatting so that new paragraphs are not indented but separated from the previous one by a small amount of whitespace; the third sets the line spacing. The sharp-eyed among you will notice the discrepancy between our chosen line-spacing and that dictated by the university guidelines. However, no matter how poor your eyesight is, you’ll quickly appreciate that true double line-spacing (set with \renewcommand(\baselinestretch}{2} ) looks rubbish. In addition, Nottingham University are perfectly happy to accept theses set with the above line-spacing, which is more pleasing to the eye.

Some final settings:

Set which chapters to include when Latex is next run. The advantage of this method is that all your cross-references are remembered and Latex does not spit out loads of warnings.

Main matter

We now begin the document in earnest and define a suitable title:

followed by a dedication:

We now construct an abstract:

some acknowledgements:

and a contents page:

Now, we alter the pagenumbering to arabic and point to the relevant chapter files:

All your chapter files should be included here; to save time when editing, use the \includeonly command to specify which chapters to compile.

Finally, we make sure there is a link to the references section in the table of contents and reference the correct bibiography file (which in this case is called bibliography.bib ).

And there we have it: a complete thesis parent file that not only looks good on the printed page, but is fully functional and hyperlinked in PDF format.

Compiling to PDF

Whether you’ve included all the red PDF commands or not, you can convert your TEX file to PDF by running (in unix):

The additional argument to ps2pdf is required as the default paper size is US Letter. Note that you will probably need to bibtex your thesis file before running latex for the final time.

For Windows, first open a command window by going Start->Run and entering cmd . Provided MiKTeX and GhostScript are correctly installed then the necessary commands are:

The syntax for ps2pdf is slightly different in Windows compared to Unix - and note that the output pdf filename MUST be specified, else the ps file is overwritten and corrupted.

Something wrong? Suggest an improvement or add a comment (see article history ) Tagged with: latex Filed in: guides

Previous: Tutorial: the complex Ginzburg-Landau equation Next: Following log files with tail -f

Copyright © 2005-2024 David Winterbottom Content licensed under CC BY-NC-SA 4.0 .

Overleaf for LaTeX Theses & Dissertations: Home

• Using Templates on Overleaf
• Reference Managers and Overleaf
• Adding Tables, Images, and Graphs
• Research Process This link opens in a new window

MBZUAI Overleaf Commons

Getting started with your thesis or dissertation

How to get started writing your thesis in LaTeX

 Review this video from Overleaf to help you get started writing your thesis in LaTeX.

This video assumes you've used LaTeX before and are familiar with the standard commands (see our other tutorial videos  if not), and focuses on how to work with a large project split over multiple files.

Write your thesis using the official MBZUAI thesis template

5-part Guide on How to Write a Thesis in LaTeX

5-part LaTeX Thesis Writing Guide

Part 1: Basic Structure corresponding  video

Part 2: Page Layout corresponding  video

Part 3: Figures, Subfigures and Tables   corresponding video

Part 4: Bibliographies with Biblatex corresponding video

Part 5: Customizing Your Title Page and Abstract corresponding video

Collaborate with Overleaf

Collaboration tools

• One version of your project accessible to collaborators via a shared link or email invitation
• Easily select the level of access for collaborators (view, edit, or owner access)
• Real-time commenting speeds up the review process
• Tracked changes and full history view help to see contributions from collaborators
• Labels help to organize and compare different versions
• Chat in real time with collaborators right within the project

_______________________________________________

Adapted from Overleaf for LaTeX Theses & Dissertations guide, by Overleaf, May 2021, find original guide here

• Next: Using Templates on Overleaf >>
• Last Updated: Aug 3, 2022 11:08 AM
• URL: https://mbzuai.libguides.com/oltd

Overleaf for LaTeX Theses & Dissertations: Using Templates on Overleaf

• Using Templates on Overleaf
• Reference Managers and Overleaf
• Adding Tables, Images, and Graphs

Start your projects with quality LaTeX templates for journals, theses, dissertations, CVs, resumes, papers, presentations, posters, assignments, letters, project reports, and more.

Getting started

Start with Overleaf templates

Overleaf templates make it easy to get started with all types of projects - from papers and presentations to newsletters, CVs, and much more! It's also a great way to learn LaTeX and produce professional looking projects quickly.

Follow Us for More

New templates are added all the time. Follow us on Twitter for the highlights!

Find templates on Overleaf

Visit our thesis template gallery

Make your own templates on Overleaf

Upload or create templates for assignments, presentations, theses, posters, and student/faculty journals for your institution. Just create it as a project on Overleaf and use the publish menu.

Begin Your Work Using the Official 'University' Thesis Template on Overleaf

(If your University has an official thesis template published on Overleaf, you can customize this box accordingly with a link to the template)

Write your thesis using the official ' Name of University goes here ' thesis template

Find your University's template on Overleaf here ( insert link to official LaTeX thesis template on Overleaf Gallery or custom Overleaf institutional portal template page ).

• << Previous: Home
• Next: Reference Managers and Overleaf >>
• Last Updated: May 18, 2021 1:57 PM
• URL: https://overleaf.libguides.com/Thesis

Library Subject Guides

4. writing up your research: latex.

• Books on Thesis Writing
• Thesis Formatting (MS Word)
• Referencing

Other Research Support Guides 1. Plan (Design and Discover) your Research >>  2. Find & Manage Research Literature >> 3. Doing the Research >> 5. Publish & Share >> 6. Measure Impact

Latex Files

• ECE LaTex Thesis Files

These files are designed for the University of Canterbury Electrical and Computer Engineering Masters Thesis Template

Otago Computer Science LaTex Template

University of Otago also provide a template for their Computer Science department

University of Waikato Mathematics Latex Files

University of Waikato Mathematics and Statistics Departmental LatTex styles

Latex Project

LaTeX – A document preparation system

LaTeX is a high-quality typesetting system; it includes features designed for the production of technical and scientific documentation.

LaTeX is the de facto standard for the communication and publication of scientific documents. LaTeX is available as free software .

What is LaTex?

LaTeX is a set of macros (or macro packages) built on top TeX. TeX is an advanced typesetting system which was majorly developed by Donald Knuth. TeX is mainly popular because of its ability to handle complex technical text and in displaying mathematical formulae. LaTex, was built by Leslie Lamport in the 1983. LaTeX commands are basically a set of TeX commands being compiled underneath.

In short, it is a document preparation system which is predominantly used for technical or scientific writing and publishing.

LaTex guidelines

The University of Canterbury does not have any official LaTex style guide, each department may have different requirements.  If your supervisor requires you to write your thesis using LaTex, then the expectation is for them to inform you of their guidelines.

Installation

Latex editors can be downloaded from the University PCs using the Microsoft Software Centre

Apple can download LaTex editors from the Apple Store or from

• TeXMaker ​ Features-rich, supports RTL, comes with advanced editing tools and project management workflow tools.
• TeXstudio TeXstudio is a fork of TeXMaker with more tools and customisation options. It inherits all the features and functionalities of TeXMaker with addition to many other features for writers and researchers.
• Lyx LyX is a word and text document processor which combines LaTex with WYSIWYG (What You See Is What You Get) editor. It's built for creating mathematically-rich and structured documents.
• MacTex Simple yet powerful LaTeX/ TeX editor. It's built exclusively for macOS, distributed as a lightweight package.

Helpful guides

• ECE Department report writing checklist , which includes a lot of advice that's applicable to thesis writing as well.
• Style guide for technical writing in LaTeX .
• To export charts from OpenOffice in EPS format see exporting openoffice charts for latex .

Who to Contact

Phone: +6433693903.

Overleaf is an online, collaborative LatTex editor

A free version is available work solo. Half price student plans are available to work with up to 6 collaborators.

Latex Editors

• << Previous: Copyright
• Last Updated: Feb 8, 2024 12:29 PM
• URL: https://canterbury.libguides.com/writingup