abstract of thesis sample

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

• Features for Creative Writers
• Features for Work
• Features for Higher Education
• Features for Teachers
• Features for Non-Native Speakers
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Get started with ProWritingAid

Drop us a line or let's stay in touch via :

• Homework Help
• Essay Examples
• Citation Generator

Writing Guides

• Essay Title Generator
• Essay Topic Generator
• Essay Outline Generator
• Flashcard Generator
• Plagiarism Checker
• Paraphrasing Tool
• Conclusion Generator
• Thesis Statement Generator
• Introduction Generator
• Literature Review Generator
• Hypothesis Generator
• Editing Service

Writing Guides  /  15 Abstract Examples: A Comprehensive Guide

15 Abstract Examples: A Comprehensive Guide

Demystifying Abstract Writing

An abstract represents a concise, well-articulated summary of an academic piece or research. But writing an abstract goes beyond merely creating a summary. In this piece, we’ll delve into examples of abstracts to illuminate what they truly are, along with the necessary tone, style, and word counts.

You’ll also see how diverse abstract writing can be, tailored according to the subject area. For instance, an abstract for empirical research in the sciences contrasts greatly from that of a humanities article.

View 120,000+ High Quality Essay Examples

Learn-by-example to improve your academic writing

The Importance of Abstracts: Why Do We Write Them?

Every abstract you encounter, including our abstract writing example, has a few core characteristics. The primary role of an abstract is to encapsulate the essential points of a research article, much like a book’s back cover. The back jacket often influences whether you buy the book or not.

Similarly, academic papers are often behind paywalls, and the abstract assists readers in deciding if they should purchase the article. If you’re a student or researcher, the abstract helps you gauge whether the article is worth your time.

Furthermore, abstracts promote ongoing research in your field by incorporating keywords that allow others to locate your work. Knowing how to write a good abstract contributes to your professionalism, especially crucial for graduate-level studies. This skill might be vital when submitting your research to peer-reviewed journals or soliciting grant funding.

Breaking Down an Abstract: What’s Inside?

The contents of an abstract heavily rely on the type of study, research design, and subject area. An abstract may contain a succinct background statement highlighting the research’s significance, a problem statement, the methodologies used, a synopsis of the results, and the conclusions drawn.

When it comes to writing an abstract for a research paper, striking a balance between consciousness and informative detail is essential. Our examples of abstracts will help you grasp this balance better.

Moreover, you’ll learn how to format abstracts variably, matching the requirements of your degree program or publication guidelines.

Key Elements to Include in Your Abstract

• Brief Background: Introduce the importance of the research from your point of view.
• Problem Statement: Define the issue your research addresses, commonly referred to as the thesis statement.
• Methodology: Describe the research methods you employed.
• Synopsis: This should include a summary of your results and conclusions.
• Keywords: Implement terms that others will use to find your article.

Types of Abstracts

• Descriptive Abstracts: These give an overview of the source material without delving into results and conclusions.
• Informative Abstracts: These offer a more detailed look into your research, including the purpose, methods, results, and conclusions.
• Always write your abstract in the present tense.
• Keep track of word counts to maintain brevity.
• The original text should guide your abstract.
• Always provide a good synopsis in your abstract.
• If needed, use your abstract to draft a compelling query letter.
• Consider providing a literature review abstract if your research involves an extensive review of existing literature.

Types of Abstract

According to the Purdue Online Writing Lab resource, there are two different types of abstract: informational and descriptive.

Although informative and descriptive abstracts seem similar, they are different in a few key ways.

An informative abstract contains all the information related to the research, including the results and the conclusion.

A descriptive abstract is typically much shorter, and does not provide as much information. Rather, the descriptive abstract just tells the reader what the research or the article is about and not much more.

The descriptive abstract is more of a tagline or a teaser, whereas the informative abstract is more like a summary.

You will find both types of abstracts in the examples below.

Abstract Examples

Informative abstract example 1.

Emotional intelligence (EQ) has been correlated with leadership effectiveness in organizations. Using a mixed-methods approach, this study assesses the importance of emotional intelligence on academic performance at the high school level.

The Emotional Intelligence rating scale was used, as well as semi-structured interviews with teachers. Participant grades were collected. Emotional intelligence was found to correlate positively with academic success. Implications for pedagogical practice are discussed.

Explanation

This is a typical informative abstract for empirical social sciences research. Most informative abstracts proceed in a logical fashion to reflect the organization of the main paper: with sections on the background, methods, results, and conclusions.

Informative Abstract Example 2

Social learning takes place through observations of others within a community. In diverse urban landscapes and through digital media, social learning may be qualitatively different from the social learning that takes place within families and tightly-knit social circles.

This study examines the differences between social learning that takes place in the home versus social learning that takes place from watching celebrities and other role models online. Results show that social learning takes place with equal efficacy. These results show that social learning does not just take place within known social circles, and that observations of others can lead to multiple types of learning.

This is a typical informative abstract for empirical social science research. After the background statement, the author discusses the problem statement or research question, followed by the results and the conclusions.

Informative Abstract Example 3

Few studies have examined the connection between visual imagery and emotional reactions to news media consumption. This study addresses the gap in the literature via the use of content analysis. Content analysis methods were used to analyze five news media television sites over the course of six months.

Using the Yolanda Metrics method, the researchers ascertained ten main words that were used throughout each of the news media sites. Implications and suggestions for future research are included.

This abstract provides an informative synopsis of a quantitative study on content analysis. The author provides the background information, addresses the methods, and also outlines the conclusions of the research.

Informative Abstract Example 4

This study explores the relationship between nurse educator theoretical viewpoints and nursing outcomes. Using a qualitative descriptive study, the researchers conducted face-to-face interviews with nursing students and nurse educators. The results show that nurse educator theoretical viewpoints had a direct bearing on nurse self-concept. Nurse educators should be cognizant of their biases and theoretical viewpoints when instructing students.

This example showcases how to write an abstract for a qualitative study. Qualitative studies also have clearly defined research methods. Therefore, it is important to keep in mind the general principles of informative abstract writing. Always begin with the research question or problem statement, and proceed to offer a one-sentence description of study methods and results.

Informative Abstract Example 5

Aboriginal people have poorer health outcomes versus their counterparts from other ethnic groups. In this study, public health researchers conducted an epidemiological data analysis using results from the Transcultural Health Report. Using a chi-square test, the researchers found that there is a direct correlation between ethnicity and health status. Policymakers should consider introducing methods for reducing health disparities among minority groups.

This informative abstract details the methods used in the report. As with other informative abstracts, it is written in the past tense. The abstract provides the reader with a summary of the research that has already been conducted.

Informative Abstract Example 6

We examine the contradictions of decolonization as official state policy. Using themes related to decolonization from the literature, we discuss how oppressed people develop cogent policies that create new systems of power. Intersectionality is also discussed.

Through a historical analysis, it was found that decolonization and political identity construction take place not as reactionary pathways but as deliberate means of regaining access to power and privilege. The cultivation of new political and social identities promotes social cohesion in formerly colonized nation-states, paving the way for future means of identity construction.

This abstract is informative but because it does not involve a unique empirical research design, it is written in a different manner from other informative abstracts. The researchers use tone, style, and diction that parallels that which takes place within the body of the text. The main themes are elucidated.

Informative Abstract Example 7

The implementation of a nationwide mandatory vaccination program against influenza in the country of Maconda was designed to lower rates of preventable illnesses. This study was designed to measure the cost-effectiveness of the mandatory vaccination program.

This is a cohort study designed to assess the rates of new influenza cases among both children (age > 8 years) and adults (age > 18 years). Using the National Reference Data Report of Maconda, the researchers compiled new case data (n = 2034) from 2014 to 2018.

A total of 45 new cases were reported during the years of 2014 and 2015, and after that, the number of new cases dropped by 74%.

The significant decrease in new influenza cases can be attributed to the introduction of mandatory vaccination.

Interpretation

The mandatory vaccination program proves cost-effective given its efficacy in controlling the disease.

This method of writing an informative abstract divides the content into respective subject headers. This style makes the abstract easier for some readers to scan quickly.

Informative Abstract Example 8

Mindfulness-based meditation and mindfulness-based stress reduction techniques have been shown to reduce burnout and improve employee engagement. Using a pretest/posttest design, the researchers randomly assigned nurses (n = 136) to the control and experimental groups. The Kabat-Zinn mindfulness-based stress reduction technique was used as the primary intervention for the experimental group.

Quantitative findings revealed significant improvements on self-report scales for depression and anxiety. Nurse leaders and administrators should consider implementing a mindfulness-based stress reduction program to reduce burnout and improve overall nurse performance.

This abstract contains all the necessary information you would need to make an assessment of whether the research was pertinent to your study. When you are writing an informative abstract, consider taking one sentence from each of the sections in your research (introduction/background, methods, results, and conclusion).

Descriptive Abstract Example 1

What inspires individuals to become members of a new religious movement, or a “cult”? This review of the literature offers some suggestions as to the psychological and sociological motivations for joining a new religious movement, offering suggestions for future research.

Unlike informative abstracts, descriptive abstracts simply alert the reader of the main gist of the article. Reading this abstract does not tell you exactly what the researchers found out about their subject, but it does let the reader know what the overall subject matter was and the methods used to conduct the research.

Descriptive Abstract Example 2

With few remaining survivors of the Holocaust, it becomes critical for historians to gather as much data that can contribute to an overall understanding of the ways trauma has been incorporated into identity. Interviews with five Holocaust survivors reveal new information about the role that art and music played in self-healing and community healing.

This descriptive abstract does not give too much information away, simply telling the reader that the researcher used interviews and a case study research design. Although it is a brief description of the study, the researchers succinctly summarize the contents and results.

Descriptive Abstract Example 3

Absurdist theater and literature have had a strong influence on playwrights in France and England. This analysis of absurdist theater addresses the primary symbols being used in absurdist literature and traces the evolution of those symbols as they parallel historical events.

As with most descriptive abstracts, this example is short. You can use descriptive abstracts to provide the reader with a summary of non-empirical research such as literary criticism.

Descriptive Abstract Example 4

The architecture of Oscar Niemeyer reflects socialist sensibilities in the urban planning of Brasilia. This research explores the philosophical underpinnings of Niemeyer’s design through an analysis of several of the main elements of the National Congress of Brazil. Implications and influences of Niemeyer’s work are also discussed.

Note how with the descriptive abstract, you are writing about the research in a more abstract and detached way than when you write an informative abstract.

Descriptive Abstract Example 5

Jacques Derrida has written extensively on the symbolism and the metonymy of September 11. In this research, we critique Derrida’s position, on the grounds that terrorism is better understood from within a neo-realist framework. Derrida’s analysis lacks coherence, is pompous and verbose, and is unnecessarily abstract when considering the need for a cogent counterterrorism strategy.

Like most descriptive abstracts, this encapsulates the main idea of the research but does not necessarily follow the same format as you might use in an informative abstract. Whereas an informative abstract follows the chronological format used in the paper you present, with introduction, methods, findings, and conclusion, a descriptive abstract only focuses on the main idea.

Descriptive Abstract Example 6

The Five Factor model of personality has been well established in the literature and is one of the most reliable and valid methods of assessing success. In this study, we use the Five Factor model to show when the qualities of neuroticism and introversion, which have been typically linked with low rates of success, are actually correlated with achievement in certain job sectors. Implications and suggestions for clinicians are discussed.

This descriptive abstract does not discuss the methodology used in the research, which is what differentiates it from an informative abstract. However, the description does include the basic elements contained in the report.

Descriptive Abstract Example 7

This is a case study of a medium-sized company, analyzing the competencies required for entering into the Indian retail market. Focusing on Mumbai and Bangalore, the expansion into these markets reveals potential challenges for European firms. A comparison case with a failed expansion into Wuhan, China is given, offering an explanation for how there are no global cross-cultural competencies that can be applied in all cases.

While this descriptive abstract shows the reader what the paper addresses, the methods and results are omitted. A descriptive abstract is shorter than an informative abstract.

Which Type of Abstract Should I Use?

Check with your professors or academic advisors, or with the editor of the peer-reviewed journal before determining which type of abstract is right for you.

If you have conducted original empirical research in the social sciences, you will most likely want to use an informative abstract.

However, when you are writing about the arts or humanities, a descriptive abstract might work best.

What Information Should I Include in An Abstract?

The information you include in the abstract will depend on the substantive content of your report.

Consider breaking down your abstract into five separate components, corresponding roughly with the structure of your original research.

You can write one or two sentences on each of these sections:

For Original Empirical Research

1. Background/Introductory Sentence

If you have conducted, or are going to conduct, an original research, then consider the following elements for your abstract:

What was your hypothesis?

What has the previous literature said about your subject?

What was the gap in the literature you are filling with your research?

What are the research questions?

What problem are you trying to solve?

What theoretical viewpoint or approach did you take?

What was your research design (qualitative, quantitative, multi-factorial, mixed-methods)?

What was the setting? Did you conduct a clinical analysis? Or did you conduct a systematic review of literature or a meta-analysis of data?

How many subjects were there?

How did you collect data?

How did you analyze the data?

What methodological weaknesses need to be mentioned?

III. Results

If this was a qualitative study, what were the major findings?

If this was a quantitative study, what were the major findings? Was there an alpha coefficient? What was the standard deviation?

Were the results statistically significant?

1. Discussion

Did the results prove or disprove the hypothesis ?

Were the results significant enough to inform future research?

How do your results link up with previous research? Does your research confirm or go beyond prior literature?

1. Conclusions/Recommendations

What do your results say about the research question or problem statement?

If you had to make a policy recommendation or offer suggestions to other scholars, what would you say?

Are there any concluding thoughts or overarching impressions?

Writing Abstracts for Literary Criticism and Humanities Research

Writing abstracts for research that is not empirical in nature does not involve the same steps as you might use when composing an abstract for the sciences or social sciences.

When writing an abstract for the arts and humanities, consider the following outline, writing one or two sentences for each section:

1. Background/Introduction

What other scholars have said before.

Why you agree or disagree.

Why this is important to study.

1. Your methods or approach

How did you conduct your research?

Did you analyze a specific text, case study, or work of art?

Are you comparing and contrasting?

What philosophical or theoretical model did you use?

III. Findings

What did you discover in the course of your research?

1. Discussion/Conclusion

How are your findings meaningful?

What new discoveries have you made?

How does your work contribute to the discourse?

General Tips for Writing Abstracts

The best way to improve your abstract writing skills is to read more abstracts. When you read other abstracts, you will understand more about what is expected, and what you should include or leave out from the abstract.

Reading abstracts helps you become more familiar with the tone and style, as well as the structure of abstracts.

Write your abstract after you have completed your research.

Many successful abstracts actually take the first sentence from each section of your research, such as the introduction/background, review of literature, methods, results, discussion, and conclusion.

Although it is a good idea to write the results of your original research, avoid giving too much detail. Instead, focus on what really matters.

A good abstract is like an elevator pitch.

While there is no absolute rule for how long an abstract should be, a general rule of thumb is around 100-150 words. However, some descriptive abstracts may be shorter than that, and some informative abstracts could be longer.

How to Write a Synopsis

Writing a synopsis involves summarizing a work’s key elements, including the narrative arc, major plot points, character development, rising action, and plot twists. Here’s a step-by-step guide on how to create a compelling synopsis.

• Outline the Narrative Arc: Start by defining your story’s beginning, middle, and end. This includes the introduction, rising action, climax, falling action, and resolution.
• Identify Major Plot Points: Major plot points are crucial events that propel your story forward. Identify these critical moments and explain how they contribute to the narrative arc.
• Discuss Character Development: Characters are the backbone of your story. Describe your characters at the start of the story and demonstrate how they evolve by the end.
• Illustrate Rising Action: The rising action is a series of events that lead to the climax of your story. Ensure to discuss these events and how they build suspense and momentum.
• Include Plot Twists: If your story has unexpected turns or surprises, highlight these plot twists in your synopsis. However, ensure these twists aren’t revealed too abruptly.

Remember, a synopsis should provide a complete overview of your story. It’s different from a teaser or back cover blurb — your objective isn’t to create suspense, but to succinctly present the whole narrative.

How Long Should a Summary Be

The length of a summary varies based on the complexity and length of the original work. However, as a rule of thumb, a summary should ideally be no more than 10-15% of the original text’s word count. This ensures you cover the significant plot points, character development, narrative arc, rising action, and plot twists without going into excessive detail.

For instance, if you’re summarizing a 300-page novel, your summary may be about 30 pages. If you’re summarizing a short 5-page article, a half-page to one-page summary should suffice.

Remember, the goal of a summary is to condense the source material, maintaining the core ideas and crucial information while trimming unnecessary details. Always aim for brevity and clarity in your summaries.

Abstracts are even shorter versions of executive summaries. Although abstracts are brief and seem relatively easy, they can be challenging to write. If you are struggling to write your abstract, just consider the main ideas of your original research paper and pretend that you are summarizing that research for a friend.

If you would like more examples of strong abstracts in your field of research, or need help composing your abstract or conducting research, call a writing tutor.

“Abstracts,” (n.d.). The Writing Center. https://writingcenter.unc.edu/tips-and-tools/abstracts/

Koopman, P. (1997). How to write an abstract. https://users.ece.cmu.edu/~koopman/essays/abstract.html

University of Massachusetts, Amherst (n.d.). Writing an abstract.

“Writing Report Abstracts,” (n.d.). Purdue Online Writing Lab. https://owl.english.purdue.edu/owl/resource/656/1/

Take the first step to becoming a better academic writer.

Writing tools.

• How to write a research proposal 2021 guide
• Guide to citing in MLA
• Guide to citing in APA format
• Chicago style citation guide
• Harvard referencing and citing guide
• How to complete an informative essay outline

How to Write a Synthesis Essay: Tips and Techniques

Why Using Chat-GPT for Writing Your College Essays is Not Smart

The Importance of an Outline in Writing a Rhetorical Analysis Essay

A Guide to Choosing the Perfect Compare and Contrast Essay Topic

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

19 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Nicely explained. Very simple to understand. Thank you!

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

We use cookies and similar technologies to improve your website experience and help us understand how you use our website. By continuing to use this website, you consent to the usage of cookies. Learn more about our Privacy Statement and Cookie Policy .

• Our Mission
• Code of Conduct
• The Consultants
• Hours and Locations
• Apply to Become a Consultant
• Make an Appointment
• Face-to-Face Appointments
• Zoom Appointments
• Written Feedback Appointments
• Support for Writers with Disabilities
• Policies and Restrictions
• Upcoming Workshops
• Class Workshops
• Meet the Consultants
• Writing Guides and Tools
• Schedule an appointment! Login or Register
• Graduate Students
• ESOL Students

Writing an Abstract

What is an abstract.

An abstract is a 150- to 250-word paragraph that provides readers with a quick overview of your essay or report and its organization. It should express your thesis (or central idea) and your key points; it should also suggest any implications or applications of the research you discuss in the paper.

According to Carole Slade, an abstract is “a concise summary of the entire paper.”

The function of an abstract is to describe, not to evaluate or defend, the paper.

The abstract should begin with a brief but precise statement of the problem or issue, followed by a description of the research method and design, the major findings, and the conclusions reached.

The abstract should contain the most important key words referring to method and content: these facilitate access to the abstract by computer search and enable a reader to decide whether to read the entire dissertation.

Note: Your abstract should read like an overview of your paper, not a proposal for what you intended to study or accomplish. Avoid beginning your sentences with phrases like, “This essay will examine...” or “In this research paper I will attempt to prove...”  

(The examples above are taken from Form and Style (10th ed.), by Carole Slade; The Scott, Foresman Handbook for Writers (5th ed.); and the Publication Manual of the American Psychological Association (5th ed.).)

Note: The following are specifications for an abstract in APA style, used in the social sciences, such as psychology or anthropology. If you are in another discipline, check with your professor about the format for the abstract.

Writing an Abstract for an IMRaD Paper

Many papers in the social sciences, natural sciences, and engineering sciences follow IMRaD structure: their main sections are entitled Introduction, Methods, Results, and Discussion. People use the abstract to decide whether to read the rest of the paper, so the abstract for such a paper is important.

Because the abstract provides the highlights of the paper, you should draft your abstract after you have written a full draft of the paper. Doing so, you can summarize what you’ve already written in the paper as you compose the abstract.

Typically, an abstract for an IMRaD paper or presentation is one or two paragraphs long (120 – 500 words). Abstracts usually spend

25% of their space on the purpose and importance of the research (Introduction)

25% of their space on what you did (Methods)

35% of their space on what you found (Results)

15% of their space on the implications of the research

Try to avoid these common problems in IMRaD abstracts:

1. The abstract provides a statement of what the paper will ask or explore rather than what it found:

X This report examines the causes of oversleeping. (What did it find out about these causes?) √ Individuals oversleep because they go to bed too late, forget to set their alarms, and keep their rooms dark.

2. The abstract provides general categories rather than specific details in the findings:

X The study draws conclusions about which variables are most important in choosing a movie theater. (What, specifically, are these variables?)

√ The study concludes that the most important variables in choosing a movie theater are comfortable seats and high-quality popcorn.

The Writing Center

4400 University Drive, 2G8 Fairfax, VA 22030

• Johnson Center, Room 227E
• +1-703-993-1200
• [email protected]

Quick Links

• Register with us

© Copyright 2024 George Mason University . All Rights Reserved. Privacy Statement | Accessibility

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 21 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 412 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• Jump to menu
• Student Home
• Accept your offer
• How to enrol
• Student ID card
• Set up your IT
• Orientation Week
• Fees & payment
• Academic calendar
• Special consideration
• Transcripts
• The Nucleus: Student Hub
• Referencing
• Essay writing
• Learning abroad & exchange
• Professional development & UNSW Advantage
• Employability
• Financial assistance
• International students
• Equitable learning
• Postgraduate research
• Health Service
• Events & activities
• Emergencies
• Volunteering
• Clubs and societies
• Accommodation
• Health services
• Sport and gym
• Arc student organisation
• Security on campus
• Maps of campus
• Careers portal
• Change password

Sample Abstracts for Writing

These pages show two examples of typical abstracts from honours theses. Notice that the stages of the abstracts have been labelled, so that you can see the function of each sentence or part-sentence. You can also see that there are differences in the type of information that is included in each abstract, as well as differences in level of detail.

Sample 1: Genetic Mechanisms and Dissemination of Antibiotic Resistance

Abstract (Background statement)  The spread of antibiotic resistance is aided by mobile elements such as transposons and conjugative plasmids. ( Narrowing statement)  Recently, integrons have been recognised as genetic elements that have the capacity to contribute to the spread of resistance. ( Elaboration of narrowing) (statement)  Integrons constitute an efficient means of capturing gene cassettes and allow expression of encoded resistance. (Aims)  The aims of this study were to screen clinical isolates for integrons, characterise gene cassettes and extended spectrum b-lactamase (ESBL) genes.   (Extended aim)  Subsequent to this, genetic linkage between ESBL genes and gentamicin resistance was investigated.  (Results)  In this study, 41 % of multiple antibiotic resistant bacteria and 79 % of extended-spectrum b-lactamase producing organisms were found to carry either one or two integrons, as detected by PCR.   (Results)   A novel gene cassette contained within an integron was identified from Stenotrophomonas maltophilia, encoding a protein that belongs to the small multidrug resistance (SMR) family of transporters.  (Results)   pLJ1, a transferable plasmid that was present in 86 % of the extended-spectrum b-lactamase producing collection, was found to harbour an integron carrying aadB, a gene cassette for gentamicin, kanamycin and tobramycin resistance and a blaSHV-12 gene for third generation cephalosporin resistance.  (Justification of results)  The presence of this plasmid accounts for the gentamicin resistance phenotype that is often associated with organisms displaying an extended-spectrum b-lactamase phenotype. (Jones 2004, p.9)

Sample 2: Permeable Treatment Walls 

Abstract (Background statement)   A review of groundwater remediation in use today shows that new techniques are required that solve the problems of pump and treat, containment and in-situ treatment.   (Narrowing statement)  One such technique is the method that involves the use of permeable treatment walls.   (Elaboration)  These methods use a reactive medium such as iron to remediate contaminated groundwater.   (Aim*)  Several methods of implementing this remediation strategy have been described.   (Elaboration of aim)  These methods include injection and trenching.   (Specific focus of aim)  The use of a funnel and gate system via a trench has been examined in detail  (Methods)  using a groundwater modelling option of the FLAC program.   (Methods)  The modelling involved an analysis of the effect of changing the lengths of the walls and gate, varying the permeability, and varying the number of gates.   (Results)  The results showed that increasing the wall length, gate length and permeability increases the size of the plume captured.   (Key result)  An important factor in designing the walls is the residence time of the water in the gate or the contact time of the contaminant with the reactive media.   (Evaluation of results)  A sensitivity analysis has been conducted that shows that increasing the size of the capture zone decreases the residence time  (Limitations)  which will limit the design.   (Future applications and research)  The results of the modelling and sensitivity analysis are presented such that they can be used as an aid to the design of permeable treatment walls. (Dasey G. 1996 p.i) 

 *   This is the aim of the research, but it is not very clearly stated.  It might be better if the aim was made more explicit.

Sample 3: The Effects of Flouride on the Reproduction of Three Native Australian Plant Species

Note: This abstract is referred to as an Executive Summary (original 2 pages)

(Background statement)  No other form of environmental pollution has had as widespread detrimental effect on the growth and reproductive capacity of plants as air pollution.  (Narrowing statement)  Fluorides have long been recognized as highly toxic and research has shown that they are the most phytotoxic of all air pollutants.  (Elaboration of narrowing statement)  One of the most subtle impacts of fluoride on plant development is on their reproductive processes… There has been very little work directed towards forest trees, and especially native Australian species. (Broad purpose of study)  An understanding of the effects of fluoride on the reproductive processes of plant species within a forest community may help predict changes within the community following an increase in atmospheric fluoride arising from industrial sources. (Narrowing of purpose of study)  This study investigates the effects of increased atmospheric fluoride emissions from an aluminium smelter, on the reproductive processes of three native species, Banksia aemula, Bossiaea heterophylla and Actinotus helianthi. Elaboration of purpose Attention has also been paid to the soil seed reserve as an important resource for the replacement of adult plants within the community. (Results)  For Banksia aemula the study found that the reproduction of this fluoride-sensitive species may be affected in the close vicinity of the smelter… For the two ground layer species the study found that the fluoride may be affecting the Bossiaea heterophylla but having no discernible or very little effect on the Actinotus helianthi.** (Significance of results 1)  The implications of these results for the forest community are that sensitive native species such as the long-lived Banksia aemula and Bossiaea heterophylla will be removed from the plant community close to the smelter. This will reduce the resources they provide to the existing ecosystem but will, however, free more resources for the more resistant opportunist species such as Actinotus helianthi as well as the many introduced species.  (Significance of results 2)  The soil seed reserve study indicated that the seed reserve was very small in all areas. This would have several negative impacts on the natural regeneration of the area in the event of the closure of the smelter… (Future research)  Further research is recommended to assess the biochemical pathways for both the vegetative and reproductive processes and the mechanisms of the pollination of this important species… This may need to be repeated at certain intervals to monitor any further changes that may result from the higher fluoride emissions of the new expansion.

Exercise for sample 3

The abstract (executive summary) above has been summarised to focus on key stages. Some of the omitted text is reproduced below. Can you identify the stages?

• The effects of the fluoride for the forest species were assessed by measuring several reproductive and associated characteristics of the plants found within forest areas along a fluoride gradient. 

See answer:

This is the only sentence which outlines the Method of the study. It is the next sentence after the Elaboration of purpose.

• Bossiaea heterophylla shows more visible signs of fluoride stress close to the smelter. Insect damage to the Bossiaea heterophylla seed pods were observed in the background sites but not in the high fluoride sites indicating that the fluoride may be having an effect on the seed predators close to the smelter. 

This short text is part of the Results and follows on from the results section above.

• This study looked at the difference in visible structures associated with reproduction. Leaves of the Banksia aemula trees growing close to the smelter have accumulated large concentrations of foliar fluoride. Whether this is affecting the physiology and biochemical processes of the plan(which in turn may indirectly affect the reproduction potential of the plants) or the increased fluoride in the atmosphere is directly affecting the reproduction mechanisms is difficult to ascertain from this study.

This text is the first part of the concluding paragraph. The remainder of the paragraph discusses further research.

Engineering & science

• Report writing
• Technical writing
• Writing lab reports
• Sample Abstracts
• Introductions
• Literature review
• Writing up results
• Discussions
• Conclusions
• Writing tools
• Case study report in (engineering)
• ^ More support

News and notices

Guide to Using Microsoft Copilot with Commercial Data Protection for UNSW Students Published:  20 May 2024

Ethical and Responsible Use of Artificial Intelligence at UNSW Published:  17 May 2024

Discover your Library: Main Library 23 May 2024

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

Scholars often write abstracts for various applications: conference presentations may require an abstract or other short summary for a program; journal articles almost always require abstracts; invited talks and lectures are often advertised using an abstract. While the application may necessarily change the length of the abstract (a conference program may only allow for 50-75 words, for instance), the purpose and structure remains fairly constant.

Abstracts are generally kept brief (approximately 150-200 words). They differ by field, but in general, they need to summarize the article so that readers can decide if it is relevant to their work. The typical abstract includes these elements:

• A statement of the problem and objectives
• A statement of the significance of the work
• A summary of employed methods or your research approach
• A summary of findings or conclusions of the study
• A description of the implications of the findings

Regardless of field, abstract authors should explain the purpose of the work, methods used, the results and the conclusions that can be drawn. However, each field purports slightly different ways to structure the abstract. A reliable strategy is to write the abstract as a condensed version of your article, with 1-2 sentences summarizing each major section. This means that in many of the sciences and a large portion of the humanities, abstracts follow a version of the IMRAD structure: Introduction, Methods, Results, and Discussion.

Most scientific journals require authors to submit such abstracts. It is generally advisable to write the abstract in the English language. That is because most papers in other languages, especially Asian nations, tend to publish an English abstract with common search engines, such as, the MLA site.

Example Abstract

This example abstract follows the IMRAD structure closely. The first two sentences are the introduction and background information. Sentences 3-5 describe the methods used in the study. Sentence 6 summarizes the results, while the last two sentences summarize the discussion and conclusion of the study; they also indicate the significance of the results.

Usability and User-Centered Theory for 21 st Century OWLs — by Dana Lynn Driscoll, H. Allen Brizee, Michael Salvo, and Morgan Sousa from The Handbook of Research on Virtual Workplaces and the New Nature of Business Practices . Eds. Kirk St. Amant and Pavel Zemlansky. Hershey, PA: Idea Group Publishing, 2008.

This article describes results of usability research conducted on the Purdue Online Writing Lab (OWL). The Purdue OWL is an information-rich educational website that provides free writing resources to users worldwide. Researchers conducted two generations of usability tests. In the first test, participants were asked to navigate the OWL and answer questions. Results of the first test and user-centered scholarship indicated that a more user-centered focus would improve usability. The second test asked participants to answer writing-related questions using both the OWL website and a user-centered OWL prototype. Participants took significantly less time to find information using the prototype and reported a more positive response to the user-centered prototype than the original OWL. Researchers conclude that a user-centered website is more effective and can be a model for information-rich online resources. Researchers also conclude that usability research can be a productive source of ideas, underscoring the need for participatory invention.

Home / Guides / Citation Guides / MLA Format / How to write abstracts in MLA

How to write abstracts in MLA

Abstracts are usually between 100-250 words or around 5-7 sentences depending on the type. They can include short descriptions of your motivations, objective, methods, findings, discussion, and conclusion of the paper. You can also include why you wrote the paper and why readers should be interested.

APA abstracts have different formatting from MLA abstracts, so do not to use their rules interchangeably.

Why do you need an abstract?

Abstracts allow for a quick summary of your paper for other researchers. Busy researchers don’t have time to read everything, so they rely on the abstract to help them decide whether or not they will read the paper.

Although MLA style doesn’t require an abstract, the MLA style abstract is the most commonly used style in the humanities. If you are writing a paper for a class in literature, religion, philosophy, or other similar subjects, you should use MLA style. Check with your professor to see if an abstract is required for your paper.

Different types of abstracts

There are two different types of abstracts: descriptive and informative.

• Descriptive abstracts are approximately 100 words and give a brief overview of the paper. They do not include a full analysis and may not include the results and/or conclusions.
• Informative abstracts are longer and are approximately 150-250 words. They are a condensed version of your writing that contains information from every part of the paper.

How to write an abstract in MLA style

To write a high-quality abstract in MLA style, you will need an explanation of what research was done and what the outcomes were. Write in a clear, simple, and direct style. The abstract gives readers the information they need to decide whether to read the complete paper or not.

Here are some guidelines for writing a great abstract in MLA style:

• Finish the paper first. While it may be tempting to get a head start on your abstract, you should complete your paper before writing the abstract.
• Review your paper for key points and take notes. One way to take notes is to write one sentence for each paragraph. You should not copy directly from your text since your abstract should have different words and phrases. You do not need to include every detail, and in fact, you should avoid doing so. If you have an outline of your paper, use that as a guide to writing your abstract.
• Give a detailed account of the research methods used in the study and how the results were obtained.
• Provide an account of your findings and what you found as a result of your research.
• If your findings have larger implications, include them in the abstract.
• Condense those main points by summarizing the “who, what, where, and when” of your paper.
• If you don’t have an outline, organize information in the same order as in the paper.
• Write a rough draft of your abstract. Begin your abstract with a clear statement about your thesis and why your readers should care about what you’ve written. Then turn your notes into sentences.
• Avoid using long complicated sentences in your abstract along with ambiguous and unnecessary words and phrases. Remember that your abstract needs to be simple and easy to read.
• Do not include citations or footnotes in your abstract.
• Add transitions to show clear connections between ideas and create a smooth flow to your writing.
• Revise your abstract until it is 5-7 sentences or 250 words or less. Limit the length to one or two paragraphs.
• Proofread your abstract several times to make sure it is free of errors. People will stop reading if they see mistakes, and it will damage your credibility.

Format for an MLA abstract

• Use one-inch margins.
• Double-space the abstract.
• Place the abstract after the title and before the main body of the paper.
• Use one space after punctuation marks.
• Indent the first line of the paragraphs ½ inch from the left margin.
• Use 12-point font such as Times New Roman or Arial.
• Spell out acronyms.
• Include italics instead of quotation marks if you reference a long work in the abstract.

MLA abstract examples

Descriptive abstracts.

• Example 1 on Cannon’s “From Literacy to Literature: Elementary Learning and the Middle English Poet.”
• Example 2 on Sealy-Morris’s “The Rhetoric of the Paneled Page: Comics and Composition Pedagogy.”

Informational abstracts

• Example 1 on O’Neill’s “The Personal Public Sphere of Whitman’s 1840s Journalism.”

Works cited

Cannon, Christopher. “From Literacy to Literature: Elementary Learning and the Middle English Poet.”  PMLA , vol. 129, no. 3, 2014, pp. 349–364.  JSTOR, www.jstor.org/stable/24769474.

MLA Handbook . 9th ed., Modern Language Association of America, 2021.

O’Neill, Bonnie Carr. “The Personal Public Sphere of Whitman’s 1840s Journalism.”  PMLA , vol. 126, no. 4, 2011, pp. 983–998.   JSTOR , www.jstor.org/stable/41414171.

Sealey-Morris, Gabriel. “The Rhetoric of the Paneled Page: Comics and Composition Pedagogy.”  Composition Studies , vol. 43, no. 1, 2015, pp. 31–50.   JSTOR , www.jstor.org/stable/43501877.

Wallace, Joseph. “How to Write an Abstract.”  MLA Style Center , Modern Language Association of America, 5 Dec. 2018, style.mla.org/how-to-write-an-abstract/.

Published October 25, 2020. Updated July 18, 2021.

By Catherine Sigler. Catherine has a Ph.D. in English Education and has taught college-level writing for 15 years.

MLA Formatting Guide

MLA Formatting

• Annotated Bibliography
• Bibliography
• Block Quotes
• et al Usage
• In-text Citations
• Paraphrasing
• Page Numbers
• Sample Paper
• Works Cited
• MLA 8 Updates
• MLA 9 Updates
• View MLA Guide

Citation Examples

• Book Chapter
• Journal Article
• Magazine Article
• Newspaper Article
• Website (no author)
• View all MLA Examples

How useful was this post?

Click on a star to rate it!

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

MLA Citation Examples

Writing Tools

Citation Generators

Other Citation Styles

Plagiarism Checker

Upload a paper to check for plagiarism against billions of sources and get advanced writing suggestions for clarity and style.

Get Started

Sample Dissertation Abstracts

Amy K. Anderson , 2014

“Image/Text and Text/Image: Reimagining Multimodal Relationships through Dissociation”

“W.J.T. Mitchell has famously noted that we are in the midst of a “pictorial turn,” and images are playing an increasingly important role in digital and multimodal communication. My dissertation addresses the question of how meaning is made when texts and images are united in multimodal arguments. Visual rhetoricians have often attempted to understand text-image arguments by privileging one medium over the other, either using text-based rhetorical principles or developing new image-based theories. I argue that the relationship between the two media is more dynamic, and can be better understood by applying The New Rhetoric ’s concept of dissociation, which Chaim Perelman and Lucie Olbrechts-Tyteca developed to demonstrate how the interaction of differently valued concepts can construct new meaning. My dissertation expands the range of dissociation by applying it specifically to visual contexts and using it to critique visual arguments in a series of historical moments when political, religious, and economic factors cause one form of media to be valued over the other: Byzantine Iconoclasm, the late medieval period, the 1950’s advertising boom, and the modern digital age. In each of these periods, I argue that dissociation reveals how the privileged medium can shape an entire multimodal argument. I conclude with a discussion of dissociative multimodal pedagogy, applying dissociation to the multimodal composition classroom.”

Holly F. Osborn , 2014

“Apparitional Economies: Spectral Imagery in the Antebellum Imagination”

“ Apparitional Economies is invested in both a historical consideration of economic conditions through the antebellum era and an examination of how spectral representations depict the effects of such conditions on local publics and individual persons. From this perspective, the project demonstrates how extensively the period’s literature is entangled in the economic: in financial devastation, in the boundaries of seemingly limitless progress, and in the standards of value that order the worth of commodities and the persons who can trade for them.  I argue that the space of the specter is a force of representation, an invisible site in which the uncertainties of antebellum economic and social change become visible. I read this spectral space in canonical works by Nathaniel Hawthorne, Edgar Allan Poe, Herman Melville, and Walt Whitman and in emerging texts by Robert Montgomery Bird, Theophilus Fisk, Fitz James O’Brien, and Edward Williams Clay.  Methodologically, Apparitional Economies moves through historical events and textual representation in two ways: chronologically with an attention to archival materials through the antebellum era (beginning with the specters that emerge with the Panic of 1837) and interpretively across the readings of a literary specter (as a space of lack and potential, as exchange, as transformation, and as the presence of absence). As a failed body and, therefore, a flawed embodiment of economic existence, the literary specter proves a powerful representation of antebellum social and financial uncertainties.”

Michael Todd Hendricks , 2014

“Knowing and Being Known: Sexual Delinquency, Stardom, and Adolescent Girlhood in Midcentury American Film”

“Sexual delinquency marked midcentury cinematic representations of adolescent girls in 1940s, 50, and early 60s. Drawing from the history of adolescence and the context of midcentury female juvenile delinquency, I argue that studios and teen girl stars struggled for decades with publicity, censorship, and social expectations regarding the sexual license of teenage girls. Until the late 1950s, exploitation films and B movies exploited teen sex and pregnancy while mainstream Hollywood ignored those issues, struggling to promote teen girl stars by tightly controlling their private lives but depriving fan magazines of the gossip and scandals that normally fueled the machinery of stardom. The emergence and image of the postwar, sexually autonomous teen girl finally began to see expression in mainstream melodramas of the late 50s, and teen girl stars such as Sandra Dee and Natalie Wood created new, “post-delinquent” star images wherein “good girls” could still be sexually experienced. This new image was a significant departure from the widespread belief that the sexually active teen girl was a fundamentally delinquent threat to the nuclear family, and offered a liberal counterpoint to more conservative teen girl prototypes like Hayley Mills, which continued to have cultural currency.”

Emily A. Dotson , 2014

“Strong Angels of Comfort: Middle Class Managing Daughters in Victorian Literature”

“This dissertation joins a vibrant conversation in the social sciences about the challenging nature of care labor as well as feminist discussions about the role of the daughter in Victorian culture.  It explores the literary presence of the middle class managing daughter in the Victorian home.  Collectively, the novels in this study articulate social anxieties about the unclear and unstable role of daughters in the family, the physically and emotionally challenging work they, and all women, do, and the struggle for daughters to find a place in a family hierarchy, which is often structured not by effort or affection, but by proscribed traditional roles, which do not easily adapt to managing daughters, even if they are the ones holding the family together.  The managing daughter is a problem not accounted for in any conventional domestic structure or ideology so there is no role, no clear set of responsibilities and no boundaries that could, and arguably should, define her obligations, offer her opportunities for empowerment, or set necessary limits on the broad cultural mandate she has to comfort and care others.  The extremes she is often pushed to reveals the stresses and hidden conflicts for authority and autonomy inherent in domestic labor without the iconic angel in the house rhetoric that so often masks the difficulties of domestic life for women. She gains no authority or stability no matter how loving or even how necessary she is to a family because there simply is no position in the parental family structure for her.  The managing daughter thus reveals a deep crack in the structure of the traditional Victorian family by showing that it often cannot accommodate, protect, or validate a loving non-traditional family member because it values traditional hierarchies over emotion or effort.  Yet, in doing so, it also suggests that if it is position not passion that matters, then as long as a woman assumes the right position in the family then deep emotional connections to others are not necessary for her to care competently for others.”

Virginia B. Engholm , 2014

“The Power of Multiplying: Reproductive Control in American Culture, 1850-1930”

“Prior to the advent of modern birth control beginning in the nineteenth century, the biological reproductive cycle of pregnancy, post-partum recovery, and nursing dominated women’s adult years. The average birth rate per woman in 1800 was just over seven, but by 1900, that rate had fallen to just under than three and a half. The question that this dissertation explores is what cultural narratives about reproduction and reproductive control emerge in the wake of this demographic shift. What’s at stake in a woman’s decision to reproduce, for herself, her family, her nation? How do women, and society, control birth?  In order to explore these questions, this dissertation broadens the very term “birth control” from the technological and medical mechanisms by which women limit or prevent conception and birth to a conception of “controlling birth,” the societal and cultural processes that affect reproductive practices. This dissertation, then, constructs a cultural narrative of the process of controlling birth. Moving away from a focus on “negative birth control”—contraception, abortion, sterilization—the term “controlling birth” also applies to engineering or encouraging wanted or desired reproduction. While the chapters of this work often focus on traditional sites of birth control—contraceptives, abortion, and eugenics—they are not limited to those forms, uncovering previously hidden narratives of reproduction control. This new lens also reveals men’s investment in these reproductive practices.  By focusing on a variety of cultural texts—advertisements, fictional novels, historical writings, medical texts, popular print, and film—this project aims to create a sense of how these cultural productions work together to construct narratives about sexuality, reproduction, and reproductive control. Relying heavily on a historicizing of these issues, my project shows how these texts—both fictional and nonfictional—create a rich and valid site from which to explore the development of narratives of sexuality and reproductive practices, as well as how these narratives connect to larger cultural narratives of race, class, and nation. The interdisciplinary nature of this inquiry highlights the interrelationship between the literary productions of the nineteenth and twentieth century and American cultural history.

Amber M. Stamper , 2013

“Witnessing the Web: The Rhetoric of American E-Vangelism and Persuasion Online”

“From the distribution of religious tracts at Ellis Island and Billy Sunday’s radio messages to televised recordings of the Billy Graham Crusade and Pat Robertson’s 700 Club, American evangelicals have long made a practice of utilizing mass media to spread the Gospel. Most recently, these Christian evangelists have gone online. As a contribution to scholarship in religious rhetoric and media studies, this dissertation offers evangelistic websites as a case study into the ways persuasion is carried out on the Internet. Through an analysis of digital texts—including several evangelical home pages, a chat room, discussion forums, and a virtual church—I investigate how conversion is encouraged via web design and virtual community as well as how the Internet medium impacts the theology and rhetorical strategies of web evangelists. I argue for “persuasive architecture” and “persuasive communities”—web design on the fundamental level of interface layout and tightly-controlled restrictions on discourse and community membership—as key components of this strategy. In addition, I argue that evangelical ideology has been influenced by the web medium and that a “digital reformation” is taking place in the church, one centered on a move away from the Prosperity Gospel of televangelism to a Gospel focused on God as divine problem-solver and salvation as an uncomplicated, individualized, and instantaneously-rewarding experience, mimicking Web 2.0 users’ desire for quick, timely, and effective answers to all queries. This study simultaneously illuminates the structural and fundamental levels of design through which the web persuades as well as how—as rhetoricians from Plato’s King Thamus to Marshall McLuhan have recognized—media inevitably shapes the message and culture of its users.”

Devjani Roy , 2013

“Randomness, Uncertainty, and Economic Behavior: The Life of Money in Eighteenth-Century Fiction”

“My dissertation argues that fiction produced in England during the frequent financial crises and political volatility experienced between 1770 and 1820 both reflected and shaped the cultural anxiety occasioned by a seemingly random and increasingly uncertain world. The project begins within the historical framework of the multiple financial crises that occurred in the late eighteenth century: seven crises took place between 1760 and 1797 alone, appearing seemingly out of nowhere and creating a climate of financial meltdown. But how did the awareness of economic turbulence filter into the creative consciousness? Through an interdisciplinary focus on cultural studies and behavioral economics, the dissertation posits that in spite of their conventional, status quo affirming endings (opportunists are punished, lovers are married), novels and plays written between 1770 and 1820 contemplated models of behavior that were newly opportunistic, echoing the reluctant realization that irrationality had become the norm rather than a rare aberration. By analyzing concrete narrative strategies used by writers such as Frances Burney, Georgiana Cavendish, Hannah Cowley, and Thomas Holcroft, I demonstrate that late eighteenth-century fiction both articulates and elides the awareness of randomness and uncertainty in its depiction of plot, character, and narrative.”

George Micajah Phillips , 2011

“Seeing Subjects: Recognition, Identity, and Visual Cultures in Literary Modernism”

“ Seeing Subjects plots a literary history of modern Britain that begins with Dorian Gray obsessively inspecting his portrait’s changes and ends in Virginia Woolf’s visit to the cinema where she found audiences to be “savages watching the pictures.” Focusing on how literature in the late-19 th and 20 th centuries regarded images as possessing a shaping force over how identities are understood and performed, I argue that modernists in Britain felt mediated images were altering, rather than merely representing, British identity. As Britain’s economy expanded to unprecedented imperial reach and global influence, new visual technologies also made it possible to render images culled from across the British world—from its furthest colonies to darkest London—to the small island nation, deeply and irrevocably complicating British identity. In response, Oscar Wilde, Joseph Conrad, T. S. Eliot, and others sought to better understand how identity was recognized, particularly visually. By exploring how painting, photography, colonial exhibitions, and cinema sought to manage visual representations of identity, these modernists found that recognition began by acknowledging the familiar but also went further to acknowledge what was strange and new as well. Reading recognition and misrecognition as crucial features of modernist texts, Seeing Subjects argues for a new understanding of how modernism’s formal experimentation came to be and for how it calls for responses from readers today.”

Aparajita Sengupta , 2011

“Nation, Fantasy, and Mimicry: Elements of Political Resistance in Postcolonial Indian Cinema”

“In spite of the substantial amount of critical work that has been produced on Indian cinema in the last decade, misconceptions about Indian cinema still abound. Indian cinema is a subject about which conceptions are still muddy, even within prominent academic circles. The majority of the recent critical work on the subject endeavors to correct misconceptions, analyze cinematic norms and lay down the theoretical foundations for Indian cinema. This dissertation conducts a study of the cinema from India with a view to examine the extent to which such cinema represents an anti-colonial vision. The political resistance of Indian films to colonial and neo-colonial norms, and their capacity to formulate a national identity is the primary focus of the current study.”

Kenneth Carr Hawley , 2007

“The Boethian Vision of Eternity in Old, Middle, and Early Modern English Translations of De Consolatione Philosophi”

“While this analysis of the Old, Middle, and Early Modern English translations of De Consolatione Philosophiandamp;aelig; provides a brief reception history and an overview of the critical tradition surrounding each version, its focus is upon how these renderings present particular moments that offer the consolation of eternity, especially since such passages typify the work as a whole. For Boethius, confused and conflicting views on fame, fortune, happiness, good and evil, fate, free will, necessity, foreknowledge, and providence are only capable of clarity and resolution to the degree that one attains to knowledge of the divine mind and especially to knowledge like that of the divine mind, which alone possesses a perfectly eternal perspective. Thus, as it draws upon such fundamentally Boethian passages on the eternal Prime Mover, this study demonstrates how the translators have negotiated linguistic, literary, cultural, religious, and political expectations and forces as they have presented their own particular versions of the Boethian vision of eternity. Even though the text has been understood, accepted, and appropriated in such divergent ways over the centuries, the Boethian vision of eternity has held his Consolations arguments together and undergirded all of its most pivotal positions, without disturbing or compromising the philosophical, secular, academic, or religious approaches to the work, as readers from across the ideological, theological, doctrinal, and political spectra have appreciated and endorsed the nature and the implications of divine eternity. It is the consolation of eternity that has been cast so consistently and so faithfully into Old, Middle, and Early Modern English, regardless of form and irrespective of situation or background. For whether in prose and verse, all-prose, or all-verse, and whether by a Catholic, a Protestant, a king, a queen, an author, or a scholar, each translation has presented the texts central narrative: as Boethius the character is educated by the figure of Lady Philosophy, his eyes are turned away from the earth and into the heavens, moving him and his mind from confusion to clarity, from forgetfulness to remembrance, from reason to intelligence, and thus from time to eternity.”

Douglas Larue Reside , 2006

“The Electronic Edition and Textual Criticism of American Musical Theatre”

“For many, contemporary theatre is represented by the musical. The form remains, however, virtually unstudied by literary scholars. In part, this may be a result of the difficulty of accessing the texts. Reading a musical from a traditional codex is no easy matter. The integration of text and music in a musical make it inappropriate to separate the two. One can try to follow along with a cast recording. In most cases, though, this is awkward. Many cast albums record a significantly modified version of the score and lyrics and few include the entire work. Further, musical theatre texts often exist in many different versions. This work begins with a summary of the problems one encounters when editing a multi-authored text (musicals often have a lyricist, librettist, and composer) which may be revised for practical (rather than aesthetic) reasons. The merits of restoring the material changed during the production process are debated. In this discussion some attempt is made to identify who should be considered the dominating collaborator (or auteur) of a musical. Ultimately, this dissertation argues that the notion of trying to restore an "authorial Ur-Text" makes little sense given the multitude of collaborators involved in the process of making musicals. Instead, an electronic variorum edition is presented as an alternative means of studying and teaching musical theatre texts. The study concludes with a narrative of the authors own work on an electronic edition of the 1998 Broadway musical Parade and ends with a critical introduction to this text.”

• Funktionen & Preise

Thema, Gliederung & vieles mehr generieren mit KI 🤖

Einfach von der GoThesis KI bei der Abschlussarbeit helfen lassen.

Wie schreibt man ein Abstract für die Masterarbeit und was muss man dabei alles beachten? Wir zeigen dir, was du wissen musst.

Das Verfassen eines einwandfreien Abstracts für deine Masterarbeit stellt eine essentielle Fähigkeit dar, die den Grundstein für den Erfolg deiner wissenschaftlichen Arbeit legt. In diesem Guide erläutern wir dir die Bedeutung eines Abstracts, dessen wesentliche Inhalte, die richtige Schreibweise und wie er sich von anderen Textteilen wie der Einleitung oder dem Schluss deiner Arbeit abhebt.

Auch interessant:

Bachelor- & Masterarbeit im Unternehmen: Pro & Contra

In diesem Artikel zeigen wir dir, wie du deine Abschlussarbeit in einem Unternehmen schreiben kannst.

Was ist ein Abstract der Masterarbeit?

Ein Abstract für die Masterarbeit ist eine Zusammenfassung deiner Forschung, die Lesern einen schnellen Überblick über dein Forschungsthema, die angewendeten Methoden, die Hauptergebnisse und die daraus resultierenden Schlussfolgerungen bietet. Ein gut formulierter Abstract kann maßgeblich darüber entscheiden, ob deine gesamte Arbeit gelesen wird.

KI Tools für die Bachelor- & Masterarbeit

Das perfekte Thema für die Abschlussarbeit finden und dazu noch eine fertige Gliederung bekommen? Auf Knopfdruck einen ausführlichen Schreib-Leitfaden zum Thema der Arbeit? Diese und viele weitere Hilfsmittel findest du bei unseren KI-Tools. Damit wirst du deine Thesis einfach und erfolgreich schreiben!

Was sollte ein Abstract beinhalten?

Ein effektiver Abstract dient als Visitenkarte deiner Masterarbeit und sollte folgende Schlüsselelemente enthalten:

• Thema und Forschungsziele: Beginne mit einer prägnanten Einführung in das Thema und erläutere die Hauptziele deiner Forschung. Dies klärt den Zweck deiner Arbeit und führt die Forschungsfragen sowie Hypothesen auf.
• Methodik: Erkläre kurz die Methoden, die du zur Beantwortung der Forschungsfragen oder zur Überprüfung deiner Hypothesen verwendet hast. Dies gibt Aufschluss darüber, wie du zu deinen Ergebnissen gelangt bist.
• Hauptergebnisse: Stelle die zentralen Ergebnisse deiner Forschung dar. Vermeide vage Formulierungen und sorge dafür, dass die Leser eine klare Vorstellung von den erzielten Resultaten erhalten.
• Schlussfolgerungen: Deute an, welche Bedeutung deine Ergebnisse haben und wie sie zur bestehenden Forschung beitragen. Eventuelle Anwendungen deiner Erkenntnisse oder Vorschläge für zukünftige Forschungen können hier ebenfalls angeführt werden.

Gestaltung eines wirkungsvollen Abstracts

Die Kunst, ein überzeugendes Abstract zu schreiben, verlangt Genauigkeit und Klarheit. Hier sind einige Tipps, die dir helfen, dein Abstract effektiv zu gestalten:

• Kürze bewahren: Ein Abstract sollte in der Regel 150 bis 250 Wörter umfassen. Beschränke dich auf die wichtigsten Punkte.
• Klare Sprache: Vermeide unnötigen Fachjargon und erkläre notwendige Fachbegriffe knapp.
• Präsens oder Perfekt verwenden: Der Abstract fasst abgeschlossene Arbeiten zusammen, daher solltest du ihn im Präsens oder Perfekt schreiben.
• Verzicht auf direkte Zitate: Der Abstract sollte in deinen eigenen Worten geschrieben sein.
• Korrekturlesen: Um einen professionellen Eindruck zu hinterlassen, sollte der Abstract frei von Fehlern sein. Lasse ihn daher von Dritten Korrekturlesen.

Tipp: Aktuelle Abschlussarbeiten von Unternehmen

Bachelorand oder Masterand (m/w/d) im Qualitätsmanagement

Fassade und Brandschutz - Wissenschaftlicher Mitarbeiter (m/w/d)

Abschlussarbeit Hochintegration von EE-Komponenten im Bereich Batterie-Entwicklung ab Juli 2024

Unterschied abstract, vorwort und danksagung.

Es ist wichtig, die unterschiedlichen Funktionen dieser Textteile zu verstehen:

• Abstract: Bietet eine zusammenfassende Übersicht über die gesamte Arbeit, inklusive fachlicher Informationen.
• Vorwort: Hier kannst du Motivation, Inspiration und Danksagungen ausdrücken.
• Danksagung: Bietet Raum für persönliche Dankesworte an Unterstützer während deines Studiums und der Masterarbeit.

Positionierung des Abstracts in der Masterarbeit

Der Abstract wird in der Regel direkt nach dem Deckblatt und vor dem Inhaltsverzeichnis platziert und erscheint auf einer separaten Seite. Beachte, dass der Abstract nicht im Inhaltsverzeichnis aufgeführt wird. Falls vertrauliche Informationen Teil deines Abstracts sind, sollte dem Abstract ein Sperrvermerk vorausgehen.

Abstract auf Englisch verfassen

Es gelten dieselben Regeln wie für deutsche Abstracts, wobei besonders auf korrekte Grammatik und akademisches Vokabular zu achten ist. Tools wie Grammarly können die Sprachqualität verbessern. Alternativ kannst du unsere Vorlagen & Mustern einsetzen.

Vorlage für ein Abstract

Für diejenigen, die eine Vorlage oder ein Beispiel benötigen, bieten wir moderne Vorlagen und Beispiele für verschiedene Bestandteile der Masterarbeit zum Download an. Nutze diese, um einen besseren Eindruck von der Struktur und dem Inhalt eines idealen Abstracts zu erhalten.

KI-Tools für die Masterarbeit

Du suchst legale Unterstützung bei der Bachelorarbeit? Dann nutze unsere KI-Tools. Sie helfen beim erfolgreichen Schreiben der Thesis - von der Themenfindung bis zur Abgabe. Folgende Funktionen bietet die GoThesis KI:

• Themen-Generator
• Gliederung, Exposé & Forschungsfragen erstellen
• Leitfaden fürs Schreiben
• Interaktives Coaching per WhatsApp
• Plagiatsprüfung
• Vieles mehr

‍ Jetzt KI-Tools ausprobieren

Neueste Artikel

Vorwort Masterarbeit: Leitfaden zum Einstieg + Beispiel

Wie schreibe ich das perfekte Vorwort einer Masterarbeit? Was muss ich alles beachten? Wir zeigen es dir.

Sperrvermerk-Beispiel Abschlussarbeit (Deutsch, Englisch)

Hilfreiches Beispiel für den Sperrvermerk in einer Bachelorarbeit oder Masterarbeit als Vorlage - Deutsch und Englisch.

Thema Seminararbeit/Hausarbeit finden: Tipps & Beispiele

Wie findet das perfekte Thema für die Hausarbeit bzw. Seminararbeit? Wir zeigen es dir & stellen passende Beispiele vor.

KI Themen-Generator

Du benötigst Hilfe bei der Suche nach dem passenden Thema deiner Abschlussarbeit? Dann nutze unseren Themen-Generator, um interaktiv das perfekte Thema zu erstellen.

Themen-Datenbank

Du benötigst Inspration bei der Suche nach dem perfekten Thema? Wir haben 10.000+ Vorschläge für deine Thesis. Egal ob von Unternehmen oder theoretische Vorschläge.

Schritt-für-Schritt-Anleitung für eine erfolgreiche Arbeit?

Jetzt anmelden und interaktive Checkliste für deine Arbeit nutzen.

We use cookies to ensure that we give you the best experience on our website. By continuing to browse this repository, you give consent for essential cookies to be used. You can read more about our Privacy and Cookie Policy .

• Departments
• University Research
• About the University

Semi-Supervised Deep Learning Approaches for Anomaly Detection in Computer Vision

BARKER, JACK,WILLIAM (2023) Semi-Supervised Deep Learning Approaches for Anomaly Detection in Computer Vision. Doctoral thesis, Durham University.

Anomalies are samples which differ significantly from ordinary appearance or behaviours to such a degree that they lay outside what is considered standard in a given task. Deviations may be due to defective or broken regions of a sample, or due to foreign objects present in samples. Detecting such deviations in samples is the task of anomaly detection. In the task of X-Ray Security Scanning or Factory Line Inspection, missing the detection of anomalous instances, especially in the former, can cause catastrophic impact to safety. Missing anomalies within tasks such as Plant Disease Detection or Wind Turbine Blade Fault Detection are likely to cause increased detriment to the assets of these tasks if they are not caught soon enough. The work presented in this thesis aims to push towards automation of the detection of anomalies in such critical tasks. Firstly, an extensive review is conducted into prior approaches and paradigms which have been presented for anomaly detection. As most tasks in visual anomaly detection do not have the luxury of having copious and diverse anomalous samples, if any, methods have since shifted to semi-supervised learning whereby training is conducted solely across non-anomalous samples. An obvious problem with such training is the detection of subtle anomalies (deviations which vary only slightly from normality) in a given task. This was the motivation behind the PANDA architecture, a generative semi-supervised method presented in this thesis. This method, specifically designed to detect subtle and coarse anomalies obtains state-of-the-art results in AUC score across a substantial pool of challenging datasets. Following from this, a trend in anomaly detection has seen denoising approaches obtaining state-of-the-art and robustness to the task, however, such noising approaches are manually defined and random by nature. This thesis presents a method to add optimised, custom noise for any given anomaly detection task. The results of this method show that even a very basic architecture can obtain close to state-of-the-art performance when using this unique noising approach. Finally, an approach to detect faults in wind turbine blades is introduced in the form of a two-stage detection approach which first establishes a more accurate method of blade detection and extraction compared with prior object detection approaches, and then uses off-the-shelf anomaly detection methods to perform successful defect detection of super-pixel sub-regions of the detected blades.

Quick links

• Latest additions
• Browse by year
• Browse by department
• Deposit thesis
• Usage statistics

Prospective students

• International students
• Research degrees
• Durham e-Theses
• Deposit Guide

Last Modified: Summer 2013 | Disclaimer | Trading name | Powered by EPrints 3

ADVANCES IN IMAGE-BASED DATA HIDING, FEATURE DETECTION, GRID ALIGNMENT, AND DOCUMENT CLASSIFICATION

Data embedding tools such as barcodes are very popular nowadays but not aesthetically pleasing. In this research, we propose a watermarking scheme and an image-based surface coding scheme using the grid points as fiducial markers and the shifted points as data-bearing features. Detecting and aligning point grids play a fundamental role in these applications. Joint determination of non-grid points and estimation of non-linear spatial distortions applied to the grid is a key challenge for grid alignment. We modify a SIFT-based surface feature detection method to eliminate as many spurious feature points as possible and propose a grid alignment algorithm that starts from a small nearly regular region found in the point set and then expands the list of candidate points included in the grid. Our method is tested on both synthetically generated and real samples. Furthermore, we extend some applications of the surface coding scheme to 3D space, including hyper-conformal mapping of the grid pattern onto the 3D models, 3D surface feature detection, and 3D grid points alignment. 

A document routing system is crucial to the concept of the smart office. We abstract it as an online class-incremental image classification problem. There are two kinds of classifiers to solve this problem: exemplar, and parametric classifiers. The architecture of exemplar-based classification is summarized here. We propose a one-versus-rest parametric classifier and four different updating algorithms based on the passive-aggressiveness algorithm. An adaptive thresholding method is also proposed to indicate the low-confidence prediction. We test our methods on 547 real document images that we collected and labeled and high cumulative accuracy is reported. 

Degree Type

• Doctor of Philosophy
• Electrical and Computer Engineering

Campus location

• West Lafayette

Advisor/Supervisor/Committee Chair

Additional committee member 2, additional committee member 3, additional committee member 4, additional committee member 5, usage metrics.

• Signal processing

Vliv statického a dynamického stretchingu na maximální koncentrickou, excentrickou a izometrickou svalovou sílu flexorů a extenzorů kolenního kloubu – Bc. Daniel ČERVENÝ

Váš prohlížeč internet explorer je zastaralý..

Jsou známa bezpečnostní rizika a prohlížeč možná nedokáže zobrazit všechny prvky této a dalších webových stránek.

Bc. Daniel ČERVENÝ

Diplomová práce, vliv statického a dynamického stretchingu na maximální koncentrickou, excentrickou a izometrickou svalovou sílu flexorů a extenzorů kolenního kloubu, effect of static and dynamic stretching on maximal concentric, eccentric and isometric muscle strength of knee joint flexors and extensors, klíčová slova, obhajoba závěrečné práce.

• Vedoucí: MUDr. Stanislav Horák, Ph.D., MBA

Citační záznam

Citace dle iso 690:, jak správně citovat práci.

ČERVENÝ, Daniel. Vliv statického a dynamického stretchingu na maximální koncentrickou, excentrickou a izometrickou svalovou sílu flexorů a extenzorů kolenního kloubu. Olomouc, 2024. diplomová práce (Mgr.). UNIVERZITA PALACKÉHO V OLOMOUCI. Fakulta zdravotnických věd

Plný text práce

Obsah online archivu závěrečné práce, jak jinak získat přístup k textu, univerzita palackého v olomouci.

Magisterský studijní program / obor: Aplikovaná fyzioterapie / Aplikovaná fyzioterapie

Práce na příbuzné téma

• Svalová zranění dolních končetin a jejich terapie s využitím excentrické kontrakce u profesionálních hráčů fotbalu Martin HES
• Využití excentrické kontrakce v terapii svalových zranění Šimon ŠENDERA
• Strukturální a funkční podklady svalové kontrakce se zaměřením na excentrickou aktivaci Veronika KUČEROVÁ
• Hodnocení aktivity vybraných svalů dolní končetiny pomocí poly-EMG během excentrické kontrakce před a po zátěži u fotbalistů žákovských kategorií. Veronika DOSOUDILOVÁ
• Hodnocení unavitelnosti vybraných svalů dolní končetiny během koncentrické a excentrické kontrakce před a po zátěži pomocí poly-EMG u hráčů basketbalu Eliška VIZNEROVÁ
• Hodnocení aktivity vybraných svalů dominantní dolní končetiny pomocí poly-EMG během koncentrické a excentrické kontrakce před a po absolvování únavového protokolu u fotbalistů žákovských kategorií. Adela FIALOVÁ
• Excentrická kontrakce Michal KOLÁČEK
• Cerveny_Daniel_Vliv_statickeho_a_dynamickeho_stretchingu_.pdf
• Cerveny_Daniel_Vliv_statickeho_a_dynamickeho_stretchingu__Archive.pdf

Co je jinak přidání souboru

Co je jinak další operace se soubory

Co je jinak pohled pro experty

Co je nové vyhledávání souborů

Co je nové rychlý přístup k souborům

Co se chystá