thesis in mechanical

ScholarWorks@UMass Amherst

Home > Engineering > MIE > ME_THESES

Mechanical Engineering Masters Theses Collection

Theses from 2024 2024.

TECHNICAL EVALUATION OF FLOATING OFFSHORE WIND PLANTS AND INSTALLATION OPERATIONS , CENGIZHAN CENGIZ, Mechanical Engineering

Heat Transfer Enhacement of Latent Heat Thermal Enery Storage , Joe Hatem T. Saba, Mechanical Engineering

Theses from 2023 2023

Device Design for Inducing Aneurysm-Susceptible Flow Conditions Onto Endothelial Cells , hans f. foelsche, Mechanical Engineering

Thermal Conductivity and Mechanical Properties of Interlayer-Bonded Graphene Bilayers , Afnan Mostafa, Mechanical Engineering

Wind-Wave Misalignment Effects on Multiline Anchor Systems for Floating Offshore Wind Turbines , Doron T. Rose, Mechanical Engineering

Theses from 2022 2022

A Simplified Fluid Dynamics Model of Ultrafiltration , Christopher Cardimino, Mechanical Engineering

Local Nanomechanical Variations of Cold-sprayed Tantalum Coatings , Dhrubajyoti Chowdhury, Mechanical Engineering

Aerodynamically Augmented Air-Hockey Pucks , Madhukar Prasad, Mechanical Engineering

Analysis of Low-Induction Rotors for Increased Power Production , Jack E. Rees, Mechanical Engineering

Application of the New IEC International Design Standard for Offshore Wind Turbines to a Reference Site in the Massachusetts Offshore Wind Energy Area , Samuel C. Roach, Mechanical Engineering

Applications of Thermal Energy Storage with Electrified Heating and Cooling , Erich Ryan, Mechanical Engineering

Theses from 2021 2021

Design and Testing of a Foundation Raised Oscillating Surge Wave Energy Converter , Jacob R. Davis, Mechanical Engineering

Wind Turbine Power Production Estimation for Better Financial Agreements , Shanon Fan, Mechanical Engineering

Finite Element Analysis of Impact and Cohesion of Cold Sprayed Particles onto Non-Planar Surfaces , Zhongkui Liu, Mechanical Engineering

Mechanical Design and Analysis: High-Precision Microcontact Printhead for Roll-to-Roll Printing of Flexible Electronics , Mehdi Riza, Mechanical Engineering

Jet Breakup Dynamics of Inkjet Printing Fluids , Kashyap Sundara Rajan, Mechanical Engineering

Ground Source Heat Pumps: Considerations for Large Facilities in Massachusetts , Eric Wagner, Mechanical Engineering

Theses from 2020 2020

Modeling of Electrical Grid Systems to Evaluate Sustainable Electricity Generation in Pakistan , Muhammad Mustafa Amjad, Mechanical Engineering

A Study on Latent Thermal Energy Storage (LTES) using Phase Change Materials (PCMs) 2020 , Ritvij Dixit, Mechanical Engineering

SunDown: Model-driven Per-Panel Solar Anomaly Detection for Residential Arrays , Menghong Feng, Mechanical Engineering

Nozzle Clogging Prevention and Analysis in Cold Spray , Alden Foelsche, Mechanical Engineering

Short Term Energy Forecasting for a Microgird Load using LSTM RNN , Akhil Soman, Mechanical Engineering

Optimization of Thermal Energy Storage Sizing Using Thermodynamic Analysis , Andrew Villanueva, Mechanical Engineering

Fabrication of Binder-Free Electrodes Based on Graphene Oxide with CNT for Decrease of Resistance , Di Zhang, Mechanical Engineering

Theses from 2019 2019

Computational Fluid Dynamics Models of Electromagnetic Levitation Experiments in Reduced Gravity , Gwendolyn Bracker, Mechanical Engineering

Forecasting the Cost of Electricity Generated by Offshore Wind Turbines , Timothy Costa, Mechanical Engineering

Optical-Fiber-Based Laser-Induced Cavitation for Dynamic Mechanical Characterization of Soft Materials , Qian Feng, Mechanical Engineering

On the Fuel Spray Applications of Multi-Phase Eulerian CFD Techniques , Gabriel Lev Jacobsohn, Mechanical Engineering

Topology Network Optimization of Facility Planning and Design Problems , Ravi Ratan Raj Monga, Mechanical Engineering

The Promise of VR Headsets: Validation of a Virtual Reality Headset-Based Driving Simulator for Measuring Drivers’ Hazard Anticipation Performance , Ganesh Pai Mangalore, Mechanical Engineering

Ammonia Production from a Non-Grid Connected Floating Offshore Wind-Farm: A System-Level Techno-Economic Review , Vismay V. Parmar, Mechanical Engineering

Calculation of Scalar Isosurface Area and Applications , Kedar Prashant Shete, Mechanical Engineering

Theses from 2018 2018

Electroplating of Copper on Tungsten Powder , Richard Berdos, Mechanical Engineering

A NUMERICAL FLUTTER PREDICTOR FOR 3D AIRFOILS USING THE ONERA DYNAMIC STALL MODEL , Pieter Boersma, Mechanical Engineering

Streamwise Flow-Induced Oscillations of Bluff Bodies - The Influence of Symmetry Breaking , Tyler Gurian, Mechanical Engineering

Thermal Radiation Measurement and Development of Tunable Plasmonic Thermal Emitter Using Strain-induced Buckling in Metallic Layers , Amir Kazemi-Moridani, Mechanical Engineering

Restructuring Controllers to Accommodate Plant Nonlinearities , Kushal Sahare, Mechanical Engineering

Application and Evaluation of Lighthouse Technology for Precision Motion Capture , Soumitra Sitole, Mechanical Engineering

High Strain Rate Dynamic Response of Aluminum 6061 Micro Particles at Elevated Temperatures and Varying Oxide Thicknesses of Substrate Surface , Carmine Taglienti, Mechanical Engineering

The Effects of Mechanical Loading and Tumor Factors on Osteocyte Dendrite Formation , Wenbo Wang, Mechanical Engineering

Microenvironment Regulates Fusion of Breast Cancer Cells , Peiran Zhu, Mechanical Engineering

Design for Sustainability through a Life Cycle Assessment Conceptual Framework Integrated within Product Lifecycle Management , Renpeng Zou, Mechanical Engineering

Theses from 2017 2017

Improving the Efficiency of Wind Farm Turbines using External Airfoils , Shujaut Bader, Mechanical Engineering

Evaluation Of Impedance Control On A Powered Hip Exoskeleton , Punith condoor, Mechanical Engineering

Experimental Study on Viscoelastic Fluid-Structure Interactions , Anita Anup Dey, Mechanical Engineering

BMI, Tumor Lesion and Probability of Femur Fracture: a Probabilistic Biomechanics Approach , Zhi Gao, Mechanical Engineering

A Magnetic Resonance Compatible Knee Extension Ergometer , Youssef Jaber, Mechanical Engineering

Non-Equispaced Fast Fourier Transforms in Turbulence Simulation , Aditya M. Kulkarni, Mechanical Engineering

INCORPORATING SEASONAL WIND RESOURCE AND ELECTRICITY PRICE DATA INTO WIND FARM MICROSITING , Timothy A. Pfeiffer, Mechanical Engineering

Effects of Malformed or Absent Valves to Lymphatic Fluid Transport and Lymphedema in Vivo in Mice , Akshay S. Pujari, Mechanical Engineering

Electroless Deposition & Electroplating of Nickel on Chromium-Nickel Carbide Powder , Jeffrey Rigali, Mechanical Engineering

Numerical Simulation of Multi-Phase Core-Shell Molten Metal Drop Oscillations , Kaushal Sumaria, Mechanical Engineering

Theses from 2016 2016

Cold Gas Dynamic Spray – Characterization of Polymeric Deposition , Trenton Bush, Mechanical Engineering

Intent Recognition Of Rotation Versus Translation Movements In Human-Robot Collaborative Manipulation Tasks , Vinh Q. Nguyen, Mechanical Engineering

A Soft Multiple-Degree of Freedom Load Cell Based on The Hall Effect , Qiandong Nie, Mechanical Engineering

A Haptic Surface Robot Interface for Large-Format Touchscreen Displays , Mark Price, Mechanical Engineering

Numerical Simulation of High Velocity Impact of a Single Polymer Particle during Cold Spray Deposition , Sagar P. Shah, Mechanical Engineering

Tunable Plasmonic Thermal Emitter Using Metal-Coated Elastomeric Structures , Robert Zando, Mechanical Engineering

Theses from 2015 2015

Thermodynamic Analysis of the Application of Thermal Energy Storage to a Combined Heat and Power Plant , Benjamin McDaniel, Mechanical Engineering

Towards a Semantic Knowledge Management Framework for Laminated Composites , Vivek Premkumar, Mechanical Engineering

A CONTINOUS ROTARY ACTUATION MECHANISM FOR A POWERED HIP EXOSKELETON , Matthew C. Ryder, Mechanical Engineering

Optimal Topological Arrangement of Queues in Closed Finite Queueing Networks , Lening Wang, Mechanical Engineering

Creating a New Model to Predict Cooling Tower Performance and Determining Energy Saving Opportunities through Economizer Operation , Pranav Yedatore Venkatesh, Mechanical Engineering

Theses from 2014 2014

New Generator Control Algorithms for Smart-Bladed Wind Turbines to Improve Power Capture in Below Rated Conditions , Bryce B. Aquino, Mechanical Engineering

UBOT-7: THE DESIGN OF A COMPLIANT DEXTEROUS MOBILE MANIPULATOR , Jonathan Cummings, Mechanical Engineering

Design and Control of a Two-Wheeled Robotic Walker , Airton R. da Silva Jr., Mechanical Engineering

Free Wake Potential Flow Vortex Wind Turbine Modeling: Advances in Parallel Processing and Integration of Ground Effects , Nathaniel B. Develder, Mechanical Engineering

Buckling of Particle-Laden Interfaces , Theo Dias Kassuga, Mechanical Engineering

Modeling Dynamic Stall for a Free Vortex Wake Model of a Floating Offshore Wind Turbine , Evan M. Gaertner, Mechanical Engineering

An Experimental Study of the C-Start of a Mechanical Fish , Benjamin Kandaswamy Chinna Thambi, Mechanical Engineering

Measurement and Verification - Retro-Commissioning of a LEED Gold Rated Building Through Means of an Energy Model: Are Aggressive Energy Simulation Models Reliable? , Justin M. Marmaras, Mechanical Engineering

Development of a Support Structure for Multi-Rotor Wind Turbines , Gaurav Murlidhar Mate, Mechanical Engineering

Towards Accessible, Usable Knowledge Frameworks in Engineering , Jeffrey Mcpherson, Mechanical Engineering

A Consistent Algorithm for Implementing the Space Conservation Law , Venkata Pavan Pillalamarri Narasimha Rao, Mechanical Engineering

Kinetics of Aluminization and Homogenization in Wrought H-X750 Nickel-Base Superalloy , Sean Reilly, Mechanical Engineering

Single-Phase Turbulent Enthalpy Transport , Bradley J. Shields, Mechanical Engineering

CFD Simulation of the Flow around NREL Phase VI Wind Turbine , Yang Song, Mechanical Engineering

Selection of Outputs for Distributed Parameter Systems by Identifiability Analysis in the Time-scale Domain , Teergele, Mechanical Engineering

The Optimization of Offshore Wind Turbine Towers Using Passive Tuned Mass Dampers , Onur Can Yilmaz, Mechanical Engineering

Design of a Passive Exoskeleton Spine , Haohan Zhang, Mechanical Engineering

TURBULENT TRANSITION IN ELECTROMAGNETICALLY LEVITATED LIQUID METAL DROPLETS , Jie Zhao, Mechanical Engineering

Theses from 2013 2013

Optimization of Mixing in a Simulated Biomass Bed Reactor with a Center Feeding Tube , Michael T. Blatnik, Mechanical Engineering

Continued Development of a Chilled Water System Analysis Tool for Energy Conservation Measures Evaluation , Ghanshyam Gaudani, Mechanical Engineering

Application of Finite Element Method in Protein Normal Mode Analysis , Chiung-fang Hsu, Mechanical Engineering

Asymmetric Blade Spar for Passive Aerodynamic Load Control , Charles Mcclelland, Mechanical Engineering

Background and Available Potential Energy in Numerical Simulations of a Boussinesq Fluid , Shreyas S. Panse, Mechanical Engineering

Techno-Economic Analysis of Hydrogen Fuel Cell Systems Used as an Electricity Storage Technology in a Wind Farm with Large Amounts of Intermittent Energy , Yash Sanghai, Mechanical Engineering

Multi Rotor Wind Turbine Design And Cost Scaling , Preeti Verma, Mechanical Engineering

Activity Intent Recognition of the Torso Based on Surface Electromyography and Inertial Measurement Units , Zhe Zhang, Mechanical Engineering

Theses from 2012 2012

Simulations of Non-Contact Creep in Regimes of Mixed Dominance , Maija Benitz, Mechanical Engineering

Techniques for Industrial Implementation of Emerging Semantic Technologies , Jay T. Breindel, Mechanical Engineering

Environmental Impacts Due to Fixed and Floating Offshore Wind Turbines , Micah K. Brewer, Mechanical Engineering

Physical Model of the Feeding Strike of the Mantis Shrimp , Suzanne M. Cox, Mechanical Engineering

Investigating the Relationship Between Material Property Axes and Strain Orientations in Cebus Apella Crania , Christine M. Dzialo, Mechanical Engineering

A Multi-Level Hierarchical Finite Element Model for Capillary Failure in Soft Tissue , Lu Huang, Mechanical Engineering

Finite Element Analysis of a Femur to Deconstruct the Design Paradox of Bone Curvature , Sameer Jade, Mechanical Engineering

Vortex-Induced Vibrations of an Inclined Cylinder in Flow , Anil B. Jain, Mechanical Engineering

Experimental Study of Stability Limits for Slender Wind Turbine Blades , Shruti Ladge, Mechanical Engineering

Semi-Active Damping for an Intelligent Adaptive Ankle Prosthesis , Andrew K. Lapre, Mechanical Engineering

A Finite Volume Approach For Cure Kinetics Simulation , Wei Ma, Mechanical Engineering

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Author Corner

• Login for Faculty Authors
• Faculty Author Gallery
• Expert Gallery
• University Libraries
• Mechanical and Industrial Engineering Webpage
• UMass Amherst

This page is sponsored by the University Libraries.

© 2009 University of Massachusetts Amherst • Site Policies

Privacy Copyright

• USF Research
• USF Libraries

Digital Commons @ USF > College of Engineering > Mechanical Engineering > Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2023 2023.

Metachronal Locomotion: Swimming, Scaling, and Schooling , Kuvvat Garayev

A Human-in-the-Loop Robot Grasping System with Grasp Quality Refinement , Tian Tan

Theses/Dissertations from 2022 2022

Health Effects of Oil Spills and Dispersal of Oil Droplets and Zooplankton by Langmuir Cells , Sanjib Gurung

Estimating the As-Placed Grout Volume of Auger Cast Piles , Tristen Mee

Hybrid RANS-LES Hemolytic Power Law Modeling of the FDA Blood Pump , Joseph Tarriela

Theses/Dissertations from 2021 2021

Dynamic Loading Directed Neural Stem Cell Differentiation , Abdullah Revaha Akdemir

An Investigation of Cross-links on Crystallization and Degradation in a Novel, PhotoCross-linkable Poly (Lactic Acid) System , Nicholas Baksh

A Framework to Aid Decision Making for Smart Manufacturing Technologies in Small-and Medium-Sized Enterprises , Purvee Bhatia

Formation of Gas Jets and Vortex Rings from Bursting Bubbles: Visualization, Kinematics, and Fluid Dynamics , Ali A. Dasouqi

Development of Carbon and Silicon Carbide Based Microelectrode Implantable Neural Interfaces , Chenyin Feng

Sulfate Optimization in the Cement-Slag Blended System Based on Calorimetry and Strength Studies , Mustafa Fincan

Interrelation of Thermal Stimulation with Haptic Perception, Emotion, and Memory , Mehdi Hojatmadani

Modeling the Ambient Conditions of a Manufacturing Environment Using Computational Fluid Dynamics (CFD) , Yang Liu

Flow Visualization and Aerosol Characterization of Respiratory Jets Exhaled from a Mannequin Simulator , Sindhu Reddy Mutra

A Constitutive-Based Deep Learning Model for the Identification of Active Contraction Parameters of the Left Ventricular Myocardium , Igor Augusto Paschoalotte Nobrega

Sensible/Latent Hybrid Thermal Energy Storage for the Supercritical Carbon Dioxide Brayton Cycle , Kelly Osterman

Evaluating the Performance of Devices Engineering to Quantify the FARS Test , Harsh Patel

Event-Triggered Control Architectures for Scheduling Information Exchange in Uncertain and Multiagent Systems , Stefan Ristevski

Theses/Dissertations from 2020 2020

Experimental Investigation of Liquid Height Estimation and Simulation Verification of Bolt Tension Quantification Using Surface Acoustic Waves , Hani Alhazmi

Investigation of Navigation Systems for Size, Cost, and Mass Constrained Satellites , Omar Awad

Simulation and Verification of Phase Change Materials for Thermal Energy Storage , Marwan Mosubah Belaed

Control of a Human Arm Robotic Unit Using Augmented Reality and Optimized Kinematics , Carlo Canezo

Manipulation and Patterning of Mammalian Cells Using Vibrations and Acoustic Forces , Joel Cooper

Stable Adaptive Control Systems in the Presence of Unmodeled and Actuator Dynamics , Kadriye Merve Dogan

The Design and Development of a Wrist-Hand Orthosis , Amber Gatto

ROBOAT - Rescue Operations Bot Operating in All Terrains , Akshay Gulhane

Mitigation of Electromigration in Metal Interconnects Passivated by Ångstrom-Thin 2D Materials , Yunjo Jeong

Swimming of Pelagic Snails: Kinematics and Fluid Dynamics , Ferhat Karakas

Functional Gait Asymmetries Achieved Through Modeling and Understanding the Interaction of Multiple Gait Modulations , Fatemeh Rasouli

Distributed Control of Multiagent Systems under Heterogeneity , Selahattin Burak Sarsilmaz

Design and Implementation of Intuitive Human-robot Teleoperation Interfaces , Lei Wu

Laser Micropatterning Effects on Corrosion Resistance of Pure Magnesium Surfaces , Yahya Efe Yayoglu

Theses/Dissertations from 2019 2019

Synthesis and Characterization of Molybdenum Disulfide/Conducting Polymer Nanocomposite Materials for Supercapacitor Applications , Turki S. Alamro

Design of Shape-Morphing Structures Consisting of Bistable Compliant Mechanisms , Rami Alfattani

Low Temperature Multi Effects Desalination-Mechanical Vapor Compression Powered by Supercritical Organic Rankine Cycle , Eydhah Almatrafi

Experimental Results of a Model Reference Adaptive Control Approach on an Interconnected Uncertain Dynamical System , Kemberly Cespedes

Modeling of Buildings with Electrochromic Windows and Thermochromic Roofs , Hua-Ting Kao

Design and Testing of Experimental Langmuir Turbulence Facilities , Zongze Li

Solar Thermal Geothermal Hybrid System With a Bottoming Supercritical Organic Rankine Cycle , Francesca Moloney

Design and Testing of a Reciprocating Wind Harvester , Ahmet Topcuoglu

Distributed Spatiotemporal Control and Dynamic Information Fusion for Multiagent Systems , Dzung Minh Duc Tran

Controlled Wetting Using Ultrasonic Vibration , Matthew A. Trapuzzano

On Distributed Control of Multiagent Systems under Adverse Conditions , Emre Yildirim

Theses/Dissertations from 2018 2018

Synthesis and Characterization of Alpha-Hematite Nanomaterials for Water-Splitting Applications , Hussein Alrobei

Control of Uncertain Dynamical Systems with Spatial and Temporal Constraints , Ehsan Arabi

Simulation and Optimization of a Sheathless Size-Based Acoustic Particle Separator , Shivaraman Asoda

Simulation of Radiation Flux from Thermal Fluid in Origami Tubes , Robert R. Bebeau

Toward Verifiable Adaptive Control Systems: High-Performance and Robust Architectures , Benjamin Charles Gruenwald

Developing Motion Platform Dynamics for Studying Biomechanical Responses During Exercise for Human Spaceflight Applications , Kaitlin Lostroscio

Design and Testing of a Linear Compliant Mechanism with Adjustable Force Output , William Niemeier

Investigation of Thermal History in Large Area Projection Sintering, an Additive Manufacturing Technology , Justin Nussbaum

Acoustic Source Localization with a VTOL sUAV Deployable Module , Kory Olney

Defect Detection in Additive Manufacturing Utilizing Long Pulse Thermography , James Pierce

Design and Testing of a Passive Prosthetic Ankle Foot Optimized to Mimic an Able-Bodied Gait , Millicent Schlafly

Simulation of Turbulent Air Jet Impingement for Commercial Cooking Applications , Shantanu S. Shevade

Materials and Methods to Fabricate Porous Structures Using Additive Manufacturing Techniques , Mohsen Ziaee

Theses/Dissertations from 2017 2017

Large Area Sintering Test Platform Design and Preliminary Study on Cross Sectional Resolution , Christopher J. Gardiner

Enhanced Visible Light Photocatalytic Remediation of Organics in Water Using Zinc Oxide and Titanium Oxide Nanostructures , Srikanth Gunti

Heat Flux Modeling of Asymmetrically Heated and Cooled Thermal Stimuli , Matthew Hardy

Simulation of Hemiparetic Function Using a Knee Orthosis with Variable Impedance and a Proprioception Interference Apparatus , Christina-Anne Kathleen Lahiff

Synthesis, Characterization, and Application of Molybdenum Oxide Nanomaterials , Michael S. McCrory

Effects of Microstructure and Alloy Concentration on the Corrosion and Tribocorrosion Resistance of Al-Mn and WE43 Mg Alloys , Hesham Y. Saleh Mraied

Novel Transducer Calibration and Simulation Verification of Polydimethylsiloxane (PDMS) Channels on Acoustic Microfluidic Devices , Scott T. Padilla

Force Compensation and Recreation Accuracy in Humans , Benjamin Rigsby

Experimental Evaluation of Cooling Effectiveness and Water Conservation in a Poultry House Using Flow Blurring ® Atomizers , Rafael M. Rodriguez

Media Velocity Considerations in Pleated Air Filtration , Frederik Carl Schousboe

Orthoplanar Spring Based Compliant Force/Torque Sensor for Robot Force Control , Jerry West

Experimental Study of High-Temperature Range Latent Heat Thermal Energy Storage , Chatura Wickramaratne

Theses/Dissertations from 2016 2016

Al/Ti Nanostructured Multilayers: from Mechanical, Tribological, to Corrosion Properties , Sina Izadi

Molybdenum Disulfide-Conducting Polymer Composite Structures for Electrochemical Biosensor Applications , Hongxiang Jia

Waterproofing Shape-Changing Mechanisms Using Origami Engineering; Also a Mechanical Property Evaluation Approach for Rapid Prototyping , Andrew Jason Katz

Hydrogen Effects on X80 Steel Mechanical Properties Measured by Tensile and Impact Testing , Xuan Li

Application and Analysis of Asymmetrical Hot and Cold Stimuli , Ahmad Manasrah

Droplet-based Mechanical Actuator Utilizing Electrowetting Effect , Qi Ni

Experimental and Computational Study on Fracture Mechanics of Multilayered Structures , Hai Thanh Tran

Designing the Haptic Interface for Morse Code , Michael Walker

Optimization and Characterization of Integrated Microfluidic Surface Acoustic Wave Sensors and Transducers , Tao Wang

Corrosion Characteristics of Magnesium under Varying Surface Roughness Conditions , Yahya Efe Yayoglu

Theses/Dissertations from 2015 2015

Carbon Dioxide (CO 2 ) Emissions, Human Energy, and Cultural Perceptions Associated with Traditional and Improved Methods of Shea Butter Processing in Ghana, West Africa , Emily Adams

Experimental Investigation of Encapsulated Phase Change Materials for Thermal Energy Storage , Tanvir E. Alam

Design Of Shape Morphing Structures Using Bistable Elements , Ahmad Alqasimi

Heat Transfer Analysis of Slot Jet Impingement onto Roughened Surfaces , Rashid Ali Alshatti

Systems Approach to Producing Electrospun Polyvinylidene Difluoride Fiber Webs with Controlled Fiber Structure and Functionality , Brian D. Bell

Self-Assembly Kinetics of Microscale Components: A Parametric Evaluation , Jose Miguel Carballo

Measuring Polydimethylsiloxane (PDMS) Mechanical Properties Using Flat Punch Nanoindentation Focusing on Obtaining Full Contact , Federico De Paoli

A Numerical and Experimental Investigation of Flow Induced Noise In Hydraulic Counterbalance Valves , Mutasim Mohamed Elsheikh

An Experimental Study on Passive Dynamic Walking , Philip Andrew Hatzitheodorou

Use of Anaerobic Adhesive for Prevailing Torque Locking Feature on Threaded Product , Alan Hernandez

Viability of Bismuth as a Green Substitute for Lead in Jacketed .357 Magnum Revolver Bullets , Joel A. Jenkins

A Planar Pseudo-Rigid-Body Model for Cantilevers Experiencing Combined Endpoint Forces and Uniformly Distributed Loads Acting in Parallel , Philip James Logan

Kinematic Control of Redundant Mobile Manipulators , Mustafa Mashali

Passive Symmetry in Dynamic Systems and Walking , Haris Muratagic

Mechanical Properties of Laser-Sintered-Nylon Diamond Lattices , Clayton Neff

Design, Fabrication and Analysis of a Paver Machine Push Bar Mechanism , Mahendra Palnati

Synthesis, Characterization, and Electrochemical Properties of Polyaniline Thin Films , Soukaina Rami

A Technical and Economic Comparative Analysis of Sensible and Latent Heat Packed Bed Storage Systems for Concentrating Solar Thermal Power Plants , Jamie Trahan

Use of FDM Components for Ion Beam and Vacuum Applications , Eric Miguel Tridas

The Development of an Adaptive Driving Simulator , Sarah Marie Tudor

Dual 7-Degree-of-Freedom Robotic Arm Remote Teleoperation Using Haptic Devices , Yu-Cheng Wang

Ductility and Use of Titanium Alloy and Stainless Steel Aerospace Fasteners , Jarrod Talbott Whittaker

Advanced Search

• Email Notifications and RSS
• All Collections
• USF Faculty Publications
• Open Access Journals
• Conferences and Events
• Theses and Dissertations
• Textbooks Collection

Useful Links

• Rights Information
• SelectedWorks
• Submit Research

Home | About | Help | My Account | Accessibility Statement | Language and Diversity Statements

Privacy Copyright

BYU ScholarsArchive

Home > Engineering > Mechanical Engineering > Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2024 2024.

Application of High-Deflection Strain Gauges to Characterize Spinal-Motion Phenotypes Among Patients with CLBP , Spencer Alan Baker

GPS-Denied Localization of Landing eVTOL Aircraft , Aaron C. Brown

Development of Deployable Arrays for Satellites through Origami-Pattern Design, Modeling, and Optimization , Nathan McKellar Coleman

Investigating Which Muscles are Most Responsible for Tremor Through Both Experimental Data and Simulation , Daniel Benjamin Free

Multiscale Characterization of Dislocation Development During Cyclic Bending Under Tension in Commercially Pure Titanium , Nathan R. Miller

Time-Dependent Strain-Resistance Relationships in Silicone Nanocomposite Sensors , Alex Mikal Wonnacott

Theses/Dissertations from 2023 2023

A Series of Improved and Novel Methods in Computer Vision Estimation , James J. Adams

Experimental Validation of a Vibration-Based Sound Power Method , Trent P. Bates

Detecting Lumbar Muscle Fatigue Using Nanocomposite Strain Gauges , Darci Ann Billmire

Heated Supersonic Jet Characteristics From Far-field Acoustical Measurements , Matthew Austin Christian

Cooperative Navigation of Autonomous Vehicles in Challenging Environments , Brendon Peter Forsgren

Heat Transfer to Rolling or Sliding Drops on Inclined Heated Superhydrophobic Surfaces , Joseph Merkley Furner

Lumbar Skin Strain Fields in the Context of Skin Adhered Wearables , Andrew Kent Gibbons

A Statistical Approach for Analyzing Expectations Alignment Between Design Teams and their Project Stakeholders , Matthew Christian Goodson

Interaction of Natural Convection and Real Gas Radiation Over a Vertical Flat Plate , Nathan Hale

Thermal Atomization of Impinging Drops on Superheated Superhydrophobic Surfaces , Eric Lee

An Inexpensive, 3D Printable, Arduino and BluRay-based, Confocal Laser and Fluorescent Scanning Thermal Microscope , Justin Loose

Gradient-Based Optimization of Highly Flexible Aeroelastic Structures , Taylor G. McDonnell

Dynamic Segmental Kinematics of the Lumbar Spine During Diagnostic Movements , Paul McMullin

Friction and Heat Transfer Modeling of the Tool and Workpiece Interface in Friction Stir Welding of AA 6061-T6 for Improved Simulation Accuracy , Ryan Melander

Designed for Better Control: Using Kinematic and Dynamic Metrics to Optimize Robot Manipulator Design , John R. Morrell

Numerical Evaluation of Forces Affecting Particle Motion in Time-Invariant Pressurized Jet Flow , Donald E. Peterson

Modeling the Influence of Vibration on Flow Through Embedded Microchannels , Joseph S. Seamons

Evaluating Effects of Urban Growth Within the Greater Salt Lake Area on Local Meteorological Conditions Using Urban Canopy Modeling , Corey L. Smithson

Soft Robot Configuration Estimation: Towards Load-Agnostic Soft-Bodied Proprioception , Christian Peter Sorensen

Perfusion Pressure-Flow Relationships in Synthetic Poroelastic Vocal Fold Models , Cooper B. Thacker

Methods for Designing Compact and Deployable Origami-Inspired Flat-Foldable Spacecraft Antennas and Other Systems , Collin Ryan Ynchausti

Theses/Dissertations from 2022 2022

Mechanisms for Improvement of Key Mechanical Properties in Polymer Powder Bed Fusion Processes , Clinton Spencer Abbott

Reformulated Vortex Particle Method and Meshless Large Eddy Simulation of Multirotor Aircraft , Eduardo J. Alvarez

Improving Ideation of User Actions Using a Novel Ideation Method , Thomas L. Ashworth

Temperature and Radiation Measurements in a Pressurized Oxy-Coal Reactor , Dustin Peter Badger

Midfoot Motion and Stiffness: Does Structure Predict Function? , Kirk Evans Bassett

The Effects of Various Inlet Distortion Profiles on Transonic Fan Performance , Andrew Michael Bedke

Optical Observation of Large Area Projection Sintering , Derek Black

Investigations into Pressure Profile and Pressure Control in Wrist-Worn Health Monitoring Devices , Roger McAllister Black

Selecting and Optimizing Origami-Based Patterns for Deployable Space Systems , Diana Stefania Bolanos

Developing an Accurate Simulation Model for Predicting Friction Stir Welding Processes in 2219 Aluminum Alloy , Kennen Brooks

An Augmented Reality Maintenance Assistant with Real-Time Quality Inspection on Handheld Mobile Devices , James Thomas Frandsen

Motion Analysis of Physical Human-Human Collaboration with Varying Modus , Seth Michael Freeman

Effects of Optical Configuration and Sampling Efficiency on the Response of Low-Cost Optical Particle Counters , Brady Scott Hales

Developing Ultra-High Resolution 3D Printing for Microfluidics , Kent Richard Hooper

Controlled Pre-Wetting of Spread Powder and Its Effects on Part Formation and Printing Parameters in Binder Jetting Additive Manufacturing , Colton G. Inkley

Enabling Successful Human-Robot Interaction Through Human-Human Co-Manipulation Analysis, Soft Robot Modeling, and Reliable Model Evolutionary Gain-Based Predictive Control (MEGa-PC) , Spencer W. Jensen

Demonstration of a Transient Hot Wire Measurement System Towards a Carbide-Based Sensor for Measuring the Thermal Conductivity of Molten Salts , Peter Charles Kasper

Measured Spectral, Directional Radiative Behavior of Corrugated Surfaces , Kyle S. Meaker

Modified Transient Hot-Wire Needle Probe for Experimentally Measuring Thermal Conductivity of Molten Salts , Brian N. Merritt

Parametric Models of Maize Stalk Morphology , Michael Alan Ottesen

A Formal Consideration of User Tactics During Product Evaluation in Early-Stage Product Development , Trenton Brady Owens

Airship Systems Design, Modeling, and Simulation for Social Impact , Daniel C. Richards

Sub-Grain Characterization of Slip Activity in BCC Tantalum , Tristan Kirby Russell

Tidally Generated Internal Waves from Dual-Ridge Topography , Ian Derik Sanderson

An Investigation into the Role of Geometrically Necessary Dislocations in Multi-Strain Path Deformation in Automotive Sheet Alloys , Rishabh Sharma

Methods for Engineers to Understand, Predict, and Influence the Social Impacts of Engineered Products , Phillip Douglas Stevenson

Principles for Using Remote Data Collection Devices and Deep Learning in Evaluating Social Impact Indicators of Engineered Products for Global Development , Bryan J. Stringham

Improvement of Ex Vivo Testing Methods for Spine Biomechanical Characterization , Aubrie Lisa Taylor

Gradient-Based Wind Farm Layout Optimization , Jared Joseph Thomas

Material Development Toward an Index-Matched Gadolinium-Based Heterogenous Capture-Gated Neutron Detector , Aaron J. Thorum

Optimization of a Smart Sensor Wearable Knee Sleeve for Measuring Skin Strain to Determine Joint Biomechanics , David Steven Wood

Multi-Material 3D-Printed Silicone Vocal Fold Models , Clayton Adam Young

Theses/Dissertations from 2021 2021

Laser Forming of Compliant Mechanisms and Flat-Foldable Furniture , Daniel Calvin Ames

Effects of Static and Dynamic Thermal Gradients in Gas Chromatography , Samuel Avila

Five Degree-of-Freedom Property Interpolation of Arbitrary Grain Boundaries via Voronoi Fundamental Zone Octonion Framework , Sterling Gregory Baird

Optimization of Solar-Coal Hybridization for Low Solar Augmentation , Aaron T. Bame

Characterizing Behaviors and Functions of Joints for Design of Origami-Based Mechanical Systems , Nathan Chandler Brown

Thermal Transport to Impinging Droplets on Superhydrophobic Surfaces , Jonathan C. Burnett

3D Permeability Characterization of Sheared Fiber Reinforcement for Liquid Composite Molding Process Simulation , Collin William Childs

The Impact of Inkjet Parameters and Environmental Conditions in Binder Jetting Additive Manufacturing , Trenton Miles Colton

Control of Post-Weld Fracture Toughness in Friction Stir Processed X-80 HSLA Steel , Nolan Tracy Crook

Sensitivity of Tremor Propagation to Model Parameters , Charles Paul Curtis Jr.

Feasibility and Impact of Liquid/Liquid-encased Dopants as Method of Composition Control in Laser Powder Bed Fusion , Taylor Matthew Davis

Design Validation of a Multi-Stage Gradually Deploying Stent , Dillon J. Despain

Analysis of Closed-Loop Digital Twin , Andrew Stuart Eyring

Completion and Initial Testing of a Pressurized Oxy-Coal Reactor , Scott Hunsaker Gardner

Method for Creating Subject-specific Models of the Wrist in both Degrees of Freedom Using Measured Muscle Excitations and Joint Torques , Blake Robert Harper

CEDAR: A Dimensionally Adaptive Flow Solver for Cylindrical Combustors , Ty R. Hosler

Modeling Current and Future Windblown Utah Dust Events Using CMAQ 5.3.1 , Zachary David Lawless

Acclimation of Contact Impedance and Wrist-Based Pulsatile Signal Measurements Through Electrical Bioimpedance , Diego A. Leon

Characterizing Bacterial Resistance and Microstructure-Related Properties of Carbon-Infiltrated Carbon Nanotube Surface Coatings with Applications in Medical Devices , Stephanie Renee Morco

Effects of Whole Body Vibration on Inhibitory Control Processes , Bennett Alan Mortensen

Exploration of Constant-Force Wristbands for a Wearable Health Device , Thomas Alexander Naylor

Effect of Ported Shroud Casing Treatment Modifications on Operational Range and Limits in a Centrifugal Compressor , Alexander A. Newell

Considering Social Impact when Engineering for Global Development , Hans Jorgen Ottosson

A New Method of Measuring Flow Stress for Improved Modeling of Friction Stir Welding , David John Prymak

Constrained Nonlinear Heuristic-Based MPC for Control of Robotic Systems with Uncertainty , Tyler James Quackenbush

A Study in Soft Robotics: Metrics, Models, Control, and Estimation , Levi Thomas Rupert

Development of an Origami Inspired Composite Deployable Structure Utilizing Compliant Joints as Surrogate Folds , Samuel Porter Smith

Development and Evaluation of an Improved Microbial Inactivation Model for Analyzing Continuous Flow UV-LED Air Treatment Systems , Cole Holtom Thatcher

Micromechanisms of Near-Yield Deformation in BCC Tantalum , Joshua Jr-Syan Tsai

Effects of Carbon-Infiltrated Carbon Nanotube Growth on the Biocompatibility of 316L Stainless Steel , Sterling Charles Voss

Active Thermography for Additive Manufacturing Processes , Nicholas Jay Wallace

System Identification of Postural Tremor in Wrist Flexion-Extension and Radial-Ulnar Deviation , Sydney Bryanna Ward

Effective Temperature Control for Industrial Friction Stir Technologies , Arnold David Wright

Theses/Dissertations from 2020 2020

Characterization of the Factors Influencing Retained Austenite Transformation in Q&P Steels , Derrik David Adams

Instructional Case Studies in the Field of Windfarm Optimization , N. Francesco Baker

LCM Permeability Characterization Over Mold Curvature , Benjamin Grant Betteridge

Linear and Nonlinear Dimensionality-Reduction-Based Surrogate Models for Real-Time Design Space Exploration of Structural Responses , Gregory David Bird

Electrochemical Sensors Enhanced by Convection and by 3D Arrays of Vertically Aligned Carbon Nanotubes , Benjamin James Brownlee

In Vivo Silicon Lance Array Transfection of Plant Cells , Taylor Andrew Brown

Real Time Design Space Exploration of Static and Vibratory Structural Responses in Turbomachinery Through Surrogate Modeling with Principal Components , Spencer Reese Bunnell

On Creases and Curved Links: Design Approaches for Predicting and Customizing Behaviors in Origami-Based and Developable Mechanisms , Jared J. Butler

Page 1 of 9

Advanced Search

• Notify me via email or RSS

ScholarsArchive ISSN: 2572-4479

• Collections
• Disciplines
• Scholarly Communication
• Additional Collections
• Academic Research Blog

Author Corner

Hosted by the.

• Harold B. Lee Library

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

MS in Mechanical Engineering - Thesis Guidelines

Students may choose to pursue a thesis as part of their MS degree program, but only with the consent of a faculty advisor willing to supervise the thesis work. 

Preparation of a thesis representing an independent research work is a pivotal phase of this MS degree program. It provides the student with an opportunity to work on an open-ended problem, developing a particular solution that is not pre-determined and involving synthesis of knowledge and intellectual creativity. The thesis may involve an investigation that is fundamental in nature, or may be applied, incorporating theory, experimental testing and/or analytical modeling, and/or creative design. Through the thesis, candidates are expected to give evidence of competence in research and a sound understanding of the area of specialization involved. Students are also strongly encouraged to present their research at scientific conferences and publish the results of their thesis research in a peer-reviewed journal.

Students receive a grade of Y (incomplete) in these courses as long as the thesis in progress. Eventual thesis grades replace the incomplete grades upon formal completion of the thesis. In order to receive a grade of Y for ME-0296, students must submit a  thesis prospectus  that outlines the area of work, thesis goals, proposed approach and a review of relevant past work in the literature before the end of the first semester in which the student enrolls in ME-0296, typically the third semester of full-time study. An example of a recent MS thesis prospectus can be found in the Mechanical Engineering office.

The examining committee for MS candidates completing theses should be composed of three (3) members.

• Thesis advisor (committee chair)
• One technical expert outside of the ME department
• A third member of the committee, often another faculty member in the ME department

The committee chair is normally a full-time, tenure-track faculty member. One committee member must be from outside the ME department. Thesis normally counts as 9 credits towards the MS degree requirements. However, a student, with the approval of his/her thesis advisor, has the option to complete a 6-credit thesis by submitting a petition form to the Department. This petition must be signed by the student and the thesis advisor and will become part of the student's academic record. With a 6-credit thesis, a student must complete an extra graduate-level course (for a total of 8 courses) to fulfill the 30-credit requirement for graduation. This option is not typically available to those intending to pursue a Ph.D. degree. 

Thesis Completion

The MS thesis is completed upon:

• A successful oral defense (open to the community)
• Submittal of an approved thesis to the Office of Graduate Studies

The student should consult the  Graduate Student Handbook  for specific dates and deadlines for this process in the graduation semester.

Mechanical Engineering: Find Theses and Dissertations

• Starting Point
• Find Reference Sources
• Find Books and ebooks
• Find Journals
• Find Articles
• Find Facts & Formulas
• Find Properties of Materials
• Find Patents and Trademarks
• Find Technical Reports
• Find Theses and Dissertations
• Find Conferences
• Track a Citation
• Writing & Citing
• Associations and Societies
• Guidance for Authors of ASME Literature

About Theses and Dissertations

A dissertation or thesis is a document submitted in support of candidature for a degree or professional qualification presenting the author's research and findings.  (International Standard ISO 7144: Documentation — Presentation of theses and similar documents ).

For most universities in the U.S., dissertation is the term for the required submission for the PhD, and thesis refers only to the master's degree requirement.

Other Universities

T he best source to find theses is ProQuest Dissertations & Thesis Global .  Policies regarding theses and dissertation collections largely vary between universities.  So check the library website of the university of interest.

Carnegie Mellon University

Carnegie Mellon theses are now ONLINE and can be searched through the ProQuest database Dissertations & Theses @ Carnegie Mellon University that enables access to citations and abstracts of all dissertations and theses, as well as the fulltext in PDF format.  Scroll down and select Dissertations & Theses, then do a regular search. Print versions are also available in the libraries collection.

The Carnegie Mellon Library catalog , uses the term THESIS to denote both masters' theses and dissertations.  However, the number of master's theses is limited.  Within the libraries, theses are located in designated areas and are shelved in alphabetical order by the author's last name.  The catalog treats theses and dissertations like books and they can be borrowed as such.  Theses may be in print, microfiche, or microform.

• In the catalog use the Advanced Search :  search by author, title, or keyword limiting to type THESIS.
• For a list of theses from a specific department, use Advanced Search to combine a keyword search for the name of the department with location THESES.  E.g., search for "Dept. of Computer Science" with THESES as the location.
• For a reasonably complete list of theses at Carnegie Mellon, use Advanced Search to search Carnegie Mellon University Dissertations in the Subject line.  

Other Countries

Center for Research Libraries:  Foreign Doctoral Dissertations CRL has more than 800,000 cataloged foreign doctoral dissertations from more than 90 countries and over 1200 institutions.

• << Previous: Find Technical Reports
• Next: Find Conferences >>
• Last Updated: Feb 26, 2024 3:48 PM
• URL: https://guides.library.cmu.edu/meng

University Library, University of Illinois at Urbana-Champaign

Mechanical Science and Engineering Research Resources: Dissertations & Theses

• Find Articles & Papers
• High-Impact Journals
• Standards & Technical Reports
• Patents & Government Documents
• E-Books & Reference

Dissertations & Theses

• Additional Resources

Easy Search - Engineering

As part of the requirements for graduate level degrees, students must complete a thesis for a Master's degree and/or dissertation for a Ph.D. Dissertations and theses are submitted to the academic department and the Graduate College and are made available through the University Library. Since 2010, all theses and dissertations are electronically deposited into IDEALS, the Illinois Digital Environment for Access to Learning and Scholarship, the University's open repository of scholarly content.

ProQuest Dissertations is a comprehensive collection of citations to dissertations and theses worldwide from 1861 to the present day. Full text PDFs are available for many Ph.D. dissertations added since 1997 and some older graduate works.

• IDEALS (UIUC Institutional Repository) Digital copies of theses, data sets, and publications by University of Illinois at Urbana-Champaign faculty and students.
• ProQuest Dissertations and Theses PDF copies of dissertations and theses from U.S. universities.

Mechanical Science & Engineering Dissertations & Theses

• Mechanical Science & Engineering Dissertations & Theses Search Interface

Print Dissertations & Theses

Prior to 2010, print format dissertations and theses were bound and cataloged separately for the Grainger Engineering Library. Prior to 1983, each thesis was shelved by a call number assigned by subject headings. To locate them, search the online catalog for the author’s last name, title word(s) if known, and “theses” and the year granted as subject term(s).

Mechanical Science and Engineering dissertations and theses granted from 1985 to 1999 were assigned Q.629.1Ta, followed by the 2-number year, followed by starting letters from the author’s last name. (Example: A 1991 thesis by M. Doyle would be Q.629.1Ta91D). Dissertations and theses granted from 2000 to present were assigned Q.629.1Tb, followed by the 2-number year, followed by starting letters from the author’s last name. (Example: A 2006 thesis by H. Dewey would be Q.629.1Tb06De).

Mechanical Science and Engineering - Q. 621.8T

Subject Guide

Ask a Librarian

• << Previous: E-Books & Reference
• Next: Additional Resources >>
• Last Updated: Jun 16, 2023 9:35 AM
• URL: https://guides.library.illinois.edu/mechse

• Senior Thesis

For an A.B. degree, a research thesis is strongly encouraged but not required; a thesis is necessary to be considered for High or Highest Honors. Additionally, a thesis will be particularly useful for students interested in pursuing graduate engineering research. 

In the S.B. degree programs, every student completes a design thesis as part of the required senior capstone design course (ES 100hf). During the year-long course students design and prototype a solution to an engineering problem of their own choice.

The guide below provides an overview of the requirement for an A.B. thesis in Mechanical Engineering:

• Engineering A.B. Thesis Guide

Some recent thesis examples across all of SEAS can be found on the Harvard DASH (Digital Access to Scholarship at Harvard) repository .

Mechanical Engineering Senior thesis examples:

• Prototyped a mug to keep tea the perfect drinking temperature using a novel wax substrate for thermal control

Engineering A.B. Thesis Extensions and Late Submissions

Thesis extensions will only be granted in extraordinary circumstances, such as hospitalization or grave family emergency. An extension may only be granted by the DUS (who may consult with thesis advisor, resident dean, and readers). For joint concentrators, the other concentration should also support the extension. To request an extension, please email your ADUS or DUS, ideally several business days in advance. Please note that any extension must be able to fall within our normal grading, feedback, and degree recommendation deadline, so extensions of more than a few days are usually impossible.

Late submissions of thesis work will not be accepted. A thesis is required for joint concentrators, and a late submission will prevent a student from fulfilling this requirement. Please plan ahead and submit your thesis by the required deadline.

Senior Thesis Submission Information for A.B. Programs

Senior A.B. theses are submitted to SEAS and made accessible via the Harvard University Archives and optionally via  DASH  (Digital Access to Scholarship at Harvard), Harvard's open-access repository for scholarly work.

In addition to submitting to the department and thesis advisors & readers, each SEAS senior thesis writer will use an online submission system to submit an electronic copy of their senior thesis to SEAS; this electronic copy will be kept at SEAS as a non-circulating backup. Please note that the thesis won't be published until close to or after the degree date. During this submission process, the student will also have the option to make the electronic copy publicly available via DASH.  Basic document information (e.g., author name, thesis title, degree date, abstract) will also be collected via the submission system; this document information will be available in  HOLLIS , the Harvard Library catalog, and DASH (though the thesis itself will be available in DASH only if the student opts to allow this). Students can also make code or data for senior thesis work available. They can do this by posting the data to the Harvard  Dataverse  or including the code as a supplementary file in the DASH repository when submitting their thesis in the SEAS online submission system.

Whether or not a student opts to make the thesis available through DASH, SEAS will provide an electronic record copy of the thesis to the Harvard University Archives. The Archives may make this record copy of the thesis accessible to researchers in the Archives reading room via a secure workstation or by providing a paper copy for use only in the reading room.  Per University policy , for a period of five years after the acceptance of a thesis, the Archives will require an author’s written permission before permitting researchers to create or request a copy of any thesis in whole or in part. Students who wish to place additional restrictions on the record copy in the Archives must contact the Archives  directly, independent of the online submission system. 

Students interested in commercializing ideas in their theses may wish to consult Dr. Fawwaz Habbal , Senior Lecturer on Applied Physics, about patent protection. See Harvard's policy for information about ownership of software written as part of academic work.

In Materials Science & Mechanical Engineering

• Undergraduate Engineering at Harvard
• Concentration Requirements
• How to Declare
• Who are my Advisors?
• Sophomore Forum
• ABET Information
• Research for Course Credit (ES 91R)
• AB/SM Information
• Peer Concentration Advisors (PCA) Program
• Student Organizations
• How to Apply
• PhD Timeline
• PhD Model Program (Course Guidelines)
• Qualifying Exam
• Committee Meetings
• Committee on Higher Degrees
• Research Interest Comparison
• Collaborations
• Cross-Harvard Engagement
• Clubs & Organizations
• Centers & Initiatives
• Alumni Stories
• History of Engineering Mechanics

UKnowledge > College of Engineering > Mechanical Engineering > Theses & Dissertations

Theses and Dissertations--Mechanical Engineering

Theses/dissertations from 2024 2024.

The Determination of Darcy Permeabilities and Slip Parameters in Porous Thermal Protection Media via Pressure-Driven Steady Flows at Varying Levels of Thermal Decomposition , John Ryan O'Nan

Theses/Dissertations from 2023 2023

Utilization of Uncrewed Aircraft Systems Towards Investigating the Structure of the Atmospheric Surface Layer , Loiy Al-Ghussain

MECHANICAL ENERGY HARVESTER FOR POWERING RFID SYSTEMS COMPONENTS: MODELING, ANALYSIS, OPTIMIZATION AND DESIGN , Alireza Babaei

Impact of spallation and internal radiation on fibrous ablative materials , Raghava Sai Chaitanya Davuluri

ANISOTROPIC MATERIAL BEHAVIOR OF 3D PRINTED FIBER COMPOSITES , Jordan Garcia

Stratospheric Glider Measurements of Atmospheric Parameters , Anisa Haghighi

Attrition Study of Copper-Supplemented Iron-Based Oxygen Carrier for Chemical Looping Combustion , Neng Huang

MACHINE LEARNING FOR ADVANCING AUTOMATION AND QUALITY CONTROL IN ROBOTIC WELDING , Joseph Kershaw

A computational fluid dynamic analysis of oxyacetylene combustion flow for use in material response boundary conditions , Craig Meade

MULTISCALE MODELING OF CARDIAC GROWTH AND BAROREFLEX CONTROL , Hossein Sharifi

Precision Meteorological Prediction Employing A Data-Driven, Adaptive, Real-Time (DART) Approach , Sujit Sinha

Parallel Real Time RRT*: An RRT* Based Path Planning Process , David Yackzan

Theses/Dissertations from 2022 2022

IN-SITU CHARACTERIZATION OF SURFACE QUALITY IN γ-TiAl AEROSPACE ALLOY MACHINING , David Adeniji

NUMERICAL AND SCALING STUDY ON APPLICATION OF INKJET TECHNOLOGY TO AUTOMOTIVE COATING , Masoud Arabghahestani Dr.

EXPERIMENTAL INVESTIGATION OF ROUGHNESS AND BLOWING EFFECTS OVER ABLATOR-LIKE SURFACES , Colby Borchetta

Energy and Economic Modeling of Stillage Dewatering Processes in Kentucky Bourbon Distilleries , William Brennan

Peridynamic Material Correspondence Models: Bond-Associated and Higher-Order Formulations , WaiLam Chan

A Decoupled Engineering Methodology for Accurate Prediction of Ablative Surface Boundary Conditions in Thermal Protection Systems , Justin Cooper

QUANTITATIVE METHODS FOR TOTAL LIFECYCLE RISK LIKELIHOOD AND IMPACT ASSESSMENT IN SUSTAINABLE PRODUCT DESIGN DECISION MAKING , Christian Enyoghasi

Numerical Investigation of an Oxyacetylene Torch With Regards to an Ablative Material , Luke Fortner

Formation Control with Collision Avoidance for Fixed-Wing Unmanned Air Vehicles With Speed Constraints , Christopher Heintz

Radiative Conductivity Estimation Using Direct Approach For Fibrous Materials , Mohammad Khaleel

Modeling Human Control Behavior in Command-following Tasks , Sajad Koushkbaghi

Formation Control with Bounded Controls and Collision Avoidance: Theory and Application to Quadrotor Unmanned Air Vehicles , Zachary S. Lippay

Small-Satellite Attitude Control Using Sinusoidal Actuator Motion: Experiments on the International Space Station , K. Ryan Lush

Page 1 of 14

Advanced Search

• Notify me via email or RSS

Browse by Author

• Collections
• Disciplines

Author Corner

• Submit Research

New Title Here

Below. --> connect.

• Law Library
• Special Collections
• Copyright Resource Center
• Graduate School
• Scholars@UK

• We’d like your feedback

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

University of Kentucky ®

An Equal Opportunity University Accreditation Directory Email Privacy Policy Accessibility Disclosures

ODU Digital Commons

Home > Engineering & Technology > MAE > ETDs

Mechanical & Aerospace Engineering Theses & Dissertations

Theses and dissertations published by graduate students in the Department of Mechanical and Aerospace Engineering, College of Engineering, Old Dominion University since Fall 2016 are available in this collection. Backfiles of all dissertations (and some theses) have also been added.

In late Fall 2023 or Spring 2024, all theses will be digitized and available here. In the meantime, consult the Library Catalog to find older items in print.

Theses/Dissertations from 2023 2023

Thesis: Switching Methods for Three-Dimensional Rotational Dynamics Using Modified Rodrigues Parameters , Matthew Jarrett Banks

Dissertation: Studies of Flowfields and Dynamic Stability Characteristics of a Quadrotor , Engin Baris

Thesis: Development, Experimental Validation, and Progressive Failure Modeling of an Ultra-Thin High Stiffness Deployable Composite Boom for in-Space Applications , Jimesh D. Bhagatji

Thesis: Design and Implementation of a Launching Method for Free to Oscillate Dynamic Stability Testing , Kristen M. Carey

Thesis: SeaLion CubeSat Mission Architecture Using Model Based Systems Engineering with a Docs as Code Approach , Kevin Yi-Tzu Chiu

Dissertation: RoboRetrieve --In a Dual Role as a Hand-held Surgical Robot and a Collaborative Robot End-effector to Perform Spillage-free Specimen Retrieval in Laparoscopy , Siqin Dong

Thesis: Fabrication of Solid Oxide Fuel Cell Components Using Stereolithography 3D Printing , Hannah Dyer

Thesis: Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction , Gonzalo Fernandez Mediavilla

Dissertation: Machine Learning Approach to Activity Categorization in Young Adults Using Biomechanical Metrics , Nathan Q. C. Holland

Thesis: Study of Microphonic Effects on the C100 Cryomodule for High Energy Electron Beam Accelerators , Caleb James Hull

Dissertation: E-Cadherin Force Transmission and Stiffness Sensing , Mazen Mezher

Thesis: Experimental and Computational Aerodynamic Studies of Axially-Oriented Low-Fineness-Ratio Cylinders , Forrest Miller

Thesis: The Effect of Through Thickness Reinforcement Angle on the Disbonding Behavior in Skin-Stringer Configuration , Christopher John Morris

Dissertation: Chemical and Physical Interaction Mechanisms and Multifunctional Properties of Plant Based Graphene in Carbon Fiber Epoxy Composites , Daniel W. Mulqueen

Thesis: Data-Driven Predictive Modeling to Enhance Search Efficiency of Glowworm-Inspired Robotic Swarms in Multiple Emission Source Localization Tasks , Payal Nandi

Dissertation: Fabrication of Smooth SAC305 Thin Films via Magnetron Sputtering and Evaluations of Microstructure, Creep, and Electrical Resistivity , Manish Ojha

Dissertation: Faster, Cheaper, and Better CFD: A Case for Machine Learning to Augment Reynolds-Averaged Navier-Stokes , John Peter Romano II

Thesis: A Comparative Study of Vinti-Based Orbit Propagation and Estimation for CubeSats in Very Low Earth Orbits , Ethan Michael Senecal

Theses/Dissertations from 2022 2022

Thesis: A Comparison of Uniaxial Compressive Response and Inelastic Deformation Mechanisms in Freeze Cast Alumina-Epoxy Composites Without and With Rigid Confinement , Tareq Aljuhari

Thesis: Failure Mode, Effects and Criticality Analysis of a Very Low Earth Orbit CubeSat Mission , Robb Christopher Borowicz

Thesis: A Study of Asymmetric Supersonic Wind Tunnel Nozzle Design , Brittany A. Davis

Thesis: Electromagnetic Modeling of a Wind Tunnel Magnetic Suspension and Balance System , Desiree Driver

Dissertation: Advanced Generalized Predictive Control and Its Application to Tiltrotor Aircraft for Stability Augmentation and Vibration Reduction , Thomas Glen Ivanco

Dissertation: Numerical Simulation of Electroosmotic Flow of Viscoelastic Fluid in Microchannel , Jianyu Ji

Thesis: Assembly of Ceramic Particles in Aqueous Suspensions Induced by High-Frequency AC Electric Field , James E. John IV

Dissertation: The Effect of Soft Tissue and Bone Morphology on the Stresses in the Foot and Ankle , Jinhyuk Kim

Thesis: Development of Modeling and Simulation Platform for Path-Planning and Control of Autonomous Underwater Vehicles in Three-Dimensional Spaces , Sai Krishna Abhiram Kondapalli

Thesis: Deep Learning Object-Based Detection of Manufacturing Defects in X-ray Inspection Imaging , Juan C. Parducci

Dissertation: Utilization of Finite Element Analysis Techniques for Adolescent Idiopathic Scoliosis Surgical Planning , Michael A. Polanco

Thesis: Mechanics of Preimpregnated Fiber Tow Deposition and Compaction , Virginia Meredith Rauch

Dissertation: Role of Structural Hierarchy in Multiscale Material Systems , Siavash Sattar

Thesis: Implementation of an Extended Kalman Filter Using Inertial Sensor Data for UAVs During GPS Denied Applications , Sky Seliquini

Dissertation: Collaborative Robotics Strategies for Handling Non-Repetitive Micro-Drilling Tasks Characterized by Low Structural Mechanical Impedance , Xiangyu Wang

Theses/Dissertations from 2021 2021

Dissertation: Tunable Compressive Mechanical Behavior of Ice-Templated Materials , Sashanka Akurati

Thesis: Analysis of a Non-Equilibrium Vortex Pair as Aircraft Trailing Vortices , Manuel Ayala

Thesis: Modeling Interactions in Concentrated Ceramic Suspensions Under AC Electric Field , Naga Bharath Gundrati

Dissertation: Improved Strain Gage Instrumentation Strategies for Rotorcraft Blade Measurements , Timothy S. Davis

Thesis: A Model-Based Systems Engineering Approach to e-VTOL Aircraft and Airspace Infrastructure Design for Urban Air Mobility , Heidi Selina Glaudel

Dissertation: Development and Applications of Adjoint-Based Aerodynamic and Aeroacoustic Multidisciplinary Optimization for Rotorcraft , Ramiz Omur Icke

Thesis: A New Method for Estimating the Physical Characteristics of Martian Dust Devils , Shelly Cahoon Mann

Thesis: Post-Processing and Characterization of Additive Manufactured Carbon Fiber Reinforced Semi-Crystalline Polymers , Patricia Revolinsky

Thesis: Gradient-Based Tradeoff Design for Engineering Applications , Lena Alexis Royster

Thesis: The Effect of Through Thickness Reinforcement on Debonding Behavior of Skin/Stringer Configuration , Yogaraja Sridhar

Thesis: Empirical Modeling of Tilt-Rotor Aerodynamic Performance , Michael C. Stratton

Thesis: A Digital One Degree of Freedom Model of an Electromagnetic Position Sensor , Michelle Elizabeth Weinmann

Theses/Dissertations from 2020 2020

Thesis: Parametric Study of Residual Stresses in Wire and Arc Additive Manufactured Parts , Hisham Khaled Jamil Abusalma

Thesis: The Effect of Compaction Temperature and Pressure on Mechanical Properties of 3D Printed Short Glass Fiber Composites , Pushpashree Jain Ajith Kumar Jain

Thesis: Numerical Analysis of a Roadway Piezoelectric Harvesting System , Abdul Rahman Badawi

Dissertation: Role of Anisometric Particles in Ice-Templated Porous Ceramic Structure and Mechanical Properties , Mahesh Banda

Thesis: Mechanism of Compaction With Wrinkle Formation During Automatic Stitching of Dry Fabrics and the Size Effect of Compression Molded Discontinuous Fiber-Reinforced Composites , Anibal Benjamin Beltran Laredo

Thesis: Conical Orbital Mechanics: A Rework of Classic Orbit Transfer Mechanics , Cian Anthony Branco

Thesis: Rotorcraft Blade Angle Calibration Methods , Brian David Calvert Jr.

Dissertation: Onboard Autonomous Controllability Assessment for Fixed Wing sUAVs , Brian Edward Duvall

Thesis: A Parametric Analysis of a Turbofan Engine with an Auxiliary Bypass Combustion Chamber – The TurboAux Engine , Kaleab Fetahi

Thesis: Space-Based Countermeasure for Hypersonic Glide Vehicle , Robert Joseph Fowler IV

Thesis: Compaction and Residual Stress Modeling in Composite Manufactured with Automated Fiber Placement , Von Clyde Jamora

Thesis: Trajectory Simulation With Battery Modeling for Electric Powered Unmanned Aerial Vehicles , Ege Konuk

Thesis: Detailed Modeling of the Flash Hydrolysis of Algae for Biofuel-Production in COMSOL Multiphysics , Noah Joseph LeGrand

Thesis: Through-Thickness Reinforcement and Repair of Carbon Fiber Based Honeycomb Structures Under Flexure and Tension of Adhesively Bonded Joints , Aleric Alden Sanders

Thesis: Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters in Resonance and Off-Resonance Modes , Mohamed A. Shabara

Thesis: Thermal Contact Resistance Measurement and Related Uncertainties , Amanda Elizabeth Stark

Thesis: Model Based Systems Engineering for a Venture Class Launch Facility , Walter McGee Taraila

Thesis: A Post-Impact Behavior of Platelet-Based Composites Produced by Compression Molding , Christopher Eugene Ervin Volle

Thesis: Nonlinearity Index Aircraft Spin Motion Analysis With Dynamic Inversion Spin Recovery Controller Design , Jeffry Walker

Thesis: A Study of the Aeroacoustics of Swept Propellers for Small Unmanned Aerial Vehicles , Arthur David Wiedemann

Thesis: Finite Element Analysis Investigation of Hybrid Thin-Ply Composites for Improved Performance of Aerospace Structures , Alana M. Zahn

Theses/Dissertations from 2019 2019

Thesis: Characterization and Optimization of a Propeller Test Stand , Colin Bruce Leighton Benjamin

Dissertation: Endogenous Force Transmission Between Epithelial Cells and a Role for α-Catenin , Sandeep Dumbali

Dissertation: Effect of the Physical Micro-Environment on Cell Adhesion and Force Exertion , Mohamad Eftekharjoo

Thesis: Reducing the Noise Impact of Unmanned Aerial Vehicles by Flight Control System Augmentation , Matthew B. Galles

Thesis: Design and Manufacture of an Inertial Cascade Impactor for Industrial Hygiene Purposes , Hector Joel Gortaire

Thesis: Off Axis Compressive Response of Ice-Templated Ceramics , Rahul Kumar Jujjavarapu

Thesis: Unsupervised-Learning Assisted Artificial Neural Network for Optimization , Varun Kote

Dissertation: Numerical Simulation of Viscoelastic Flow in Micro/Nanochannels , Lanju Mei

Thesis: Comparison of Support Methods for Static Aerodynamic Testing and Validation of a Magnetic Suspension and Balance System , Cameron K. Neill

Thesis: Extension of a Penalty Method for Numerically Solving Constrained Multibody Dynamic Problems , Troy Newhart

Dissertation: Computational Analysis and Design Optimization of Convective PCR Devices , Jung Il Shu

Thesis: Periodic Orbit Analytic Construction In The Circular Restricted Three-Body Problem , Jay Shriram Suryawanshi

Thesis: A CFD Study of Steady Fully Developed Laminar Flow Through a 90-Degree Bend Pipe with a Square Cross-Sectional Area , Subodh Sushant Toraskar

Dissertation: Estimation of Arterial Wall Parameters Via Model-Based Analysis of Noninvasively Measured Arterial Pulse Signals , Dan Wang

Theses/Dissertations from 2018 2018

Thesis: Offshore Wind Energy: Simulating Local Offshore Wind Turbine , Ian P. Aquino

Dissertation: Epithelial Sheet Response to External Stimuli , Yashar Bashirzadeh

Thesis: Anthropomorphically Inspired Design of a Tendon-Driven Robotic Prosthesis for Hand Impairments , Manali Bapurao Bhadugale

Thesis: Aerothermodynamic Analysis of a Mars Sample Return Earth-Entry Vehicle , Daniel A. Boyd

Thesis: Volterra Series Approximation for Multi-Degree of Freedom, Multi-Input, Multi-Output, Aircraft Dynamics , Alexander J. Chen

Dissertation: Simplified, Alternative Formulation of Numerical Simulation of Proton Exchange Membrane Fuel Cell , Russell L. Edwards

Thesis: Distributed Sensing and System Identification of Cantilever Beams and Plates in the Presence of Weak Nonlinearities , Patrick Sean Heaney

Thesis: Dynamic Response Modeling of High Speed Planing Craft with Enforced Acceleration , Brian K. Johnson

Dissertation: Identification and Optimal Linear Tracking Control of ODU Autonomous Surface Vehicle , Nadeem Khan

Dissertation: Design and Implementation of an Artificial Neural Network Controller for Quadrotor Flight in Confined Environment , Ahmed Mekky

Thesis: Gust Alleviation System for General Aviation Aircraft , Lucas Coleman Mills

Thesis: Human-Robot Collaborative Force-Controlled Micro-Drilling for Advanced Manufacturing and Medical Applications , Parimal Mahesh Prajapati

Thesis: Single-Stage, Venturi-Driven Desalination System , Brandon Proetto

Thesis: A Cost Effective Design for a Propeller Thrust/Torque Balance , Nicholas Barrett Sadowski

Dissertation: Understanding the Mechanical Behavior of Costal Cartilage at Their Curved Exterior Surface Via a Tactile Sensor with a Built-In Probe for Distributed-Deflection Detection , Jiayue Shen

Thesis: A Scientific Approach to Understanding the Head Trauma Endured by a Mixed Martial Arts Fighter , John William Michael Sorbello

Thesis: Robocatch: Design and Making of a Hand-Held Spillage-Free Specimen Retrieval Robot for Laparoscopic Surgery , Farid Tavakkolmoghaddam

Thesis: Effects of Automated Fiber Placement on High Strain Rate Compressive Response of Advanced Composites , Alexander Trochez

Thesis: A Monolithic Internal Strain-Gage Balance Design Based on Design for Manufacturability , Thomas Ladson Webb III

Dissertation: A Stepwise Compression-Relaxation Testing Method for Tissue Characterization and Tumor Detection Via a Two-Dimensional Tactile Sensor , Yichao Yang

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines
• Author Guidelines
• MAE Website
• Other Digital Collections
• ODU Libraries
• Old Dominion University

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

Thesis, Research and Practice

Physical systems modeling and design using machine learning.

• Read more about Physical Systems Modeling and Design Using Machine Learning

Home > USC Columbia > Engineering and Computing, College of > Mechanical Engineering > Mechanical Engineering Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2023 2023.

Water Quality Monitoring and Mapping Using Rapidly Deployable Sensor Nodes , Mohamed Abdelwahab

Rapid Prediction of Phonon Density of States by Graph Neural Network and High-Throughput Screening of Candidate Substrates for Wide Bandgap Electronic Cooling , Mohammed Saif Ali Al-Fahdi

Wide View and Line Filter for Enhanced Image Gradient Computation and Edge Determination , Luke Bagan

Comprehensive Process Planning Optimization Framework for Automated Fiber Placement , Alex Ryan Brasington

Nondestructive Damage Detection and Stress Corrosion Crack Mitigation in Stainless Steel Plates , Andrew Philip Campbell

GPU-Enabled Genetic Algorithm Optimization and Path Planning of Robotic Arm for Minimizing Energy Consumption , Yichuan Cao

An Artificial Intelligence Approach to Fatigue Crack Length Estimation From Acoustic Emission Signals , Shane T. Ennis

Real-Time Product Structural Validation for Fused Filament Fabrication , Yanzhou Fu

A Globalized Optimization Schema for Automated Fiber Placement Processing Parameters , Matthew John Godbold

Development of System Pressure Drop Calculation Methods for Dilute Phase Pneumatic Conveying , Ross Daniel Gorman

Leveraging Automated Fiber Placement Computer Aided Process Planning Framework for Defect Validation and Dynamic Layup Strategies , Joshua Allen Halbritter

Spin Mediated Topological Black Hole in Acoustic Metamaterials Near Dirac-Like Cone Frequencies. , Mustahseen Mobashwer Indaleeb

Particle-Free High Spatial Resolution Velocimetry for Slip Flow Detection , Malhar Prasad Joshi

Acoustic-Emission Monitoring of Lap Joint Fatigue Cracks , Siddharth Kannan

Uncertainty Quantification and Constraint of Chemical Kinetic Mechanisms Based on Flow Reactor Experiments , Ana Victoria Kock

Studies of Damage Tolerance in Automated Fiber Placement Based Heterogeneous Meso-Architectured Carbon/ Epoxy Composite Laminates. , Karan Kodagali

Vision Controlled Autonomous Stakebot for Driving Stakes and Its Digital-Twin , Corey Lee Leydig

Synthesis and Characterization of Electrode Materials of Solid Oxide Cells for Energy Conversion and Storage , Haixia Li

Design of a Test Frame and Its Corresponding Test Methods for a Deployable Composite Boom , William Luther Montgomery

Elastic Sensing Skin for Monitoring of Concrete Structures , Emmanuel Abiodun Ogunniyi

Real-Time Edge Computing for Autonomous Systems , Junlin E. Ou

Development of Atomistic Machine Learning Approaches for Thermal Properties of Multi-Component Solids and Liquids , Alejandro David Rodriguez

Multidimensional Transport-Coupled Numerical Investigation of Non-premixed Low-Temperature Flame in Atmospheric and High-Pressure Systems , Sudipta Saha

An Autonomous Aerial Drone System for Water Fluorescence Mapping and Targeted Sampling , Kazi Ragib Ishraq Sanim

UAV-Deployable Sensing Network for Rapid Structural Health Monitoring , Joud Satme

Timing Deterministic Structural Model Updating Considering Impact and Fatigue Damage , Jason Michael Smith Jr.

Automated Fiber Placement Through Thickness Defect Stacking Optimization , Noah Christopher Swingle

Liquid Cooling System for a High Power, Medium Frequency, and Medium Voltage Isolated Power Converter , Hooman Taghavi

Material Development and Optimization of Solid Oxide Cells for Energy Conversion and Storage , Wanhua Wang

Experimental Observation of Sphere Symmetric Isolated Single Droplet Combustion in a Converging Channel , Mason Carrington Williams

Rational Design of Complex Oxides by Understanding Structure-Property Relationships for Energy Applications , Gene Yang

Theses/Dissertations from 2022 2022

Molten Salt Thermal Properties Database – Thermochemical Development and Thermodynamic Assessment of Various Molten Salt Systems , Johnathon Chandler Ard

High-Throughput Computation of Interfacial Thermal Management of Wide-Bandgap Semiconductors , Hao-Wen Chen

On the Influence of Afp-Induced Defects on Mechanical Behavior of Composite Laminates Under Fatigue Loading , Pierre Chevalier

Nondestructive Material Characterization Using a Fully Noncontact Ultrasonic Lamb Wave System for Thin Metals, Nuclear Cladding, and Composite Materials , Elsa Z. Compton

Shear Localization in the Metallic Nanolayered Composites , Shujing Dong

Uncrewed Aircraft Systems for Autonomous Infrastructure Inspection , Michail Kalaitzakis

Fabrication of Asymmetrical Hollow Fiber-Supported Thin Film Membranes, Stack Assembly, and Accelerated Long-Term Stability Test for Oxygen Production From Air , Myongjin Lee

Impacts of Preferential Vaporization of Multi-Component Liquid Fuels on Near-Limit Combustion Behaviors , Seungjae Lim

Fundamental Study of Multiphase Solid/Molten Carbonate Membranes for CO 2 Capture and Conversion , Xin Li

A Hybrid Experimental-Computational Study: Prediction of Flow Fields and Full-Field Pressure Distributions on Three-Tab Asphalt Roofing Shingles Subjected to Hurricane Velocity Winds , Troy A. Myers

Use of DIC Measurements With Finite Element Models For Direct Heterogeneous Material Property Determination and Wrinkle Formation During Automated Fiber Placement , Sreehari Rajan Kattil

Experimental Investigations of Yarn Pull-Out Behavior in Kevlar®: Influence of Applied Metallic Coatings and Effect of Dynamic Loading , Julie Ann Roark

Hybrid Theory-Machine Learning Methods for the Prediction of AFP Layup Quality , Christopher M. Sacco

Characterization of Nonequilibrium Plasma Discharge in High Water Vapor Concentration , Malik Mohammad Tahiyat

Advancement of New Solid-Oxide Iron-Air Battery (SOIAB) Operated on High-Temperature Oxide-Ion Chemistry , Qiming Tang

Towards Modeling of Induction Welding of Thermoplastic Laminates With a Mixed Finite Element Boundary Element Approach , Florentius Johannes van Zanten

Theses/Dissertations from 2021 2021

Experimental Investigation of Spray Cooling Integrated With a Modified Vapor Compression Refrigeration System Using Several Refrigerants , Nabeel Mukhlif Abdulrazzaq

Nano-Engineered High-Performance Copper-Water Heat Pipes , Ahmed A. Abdulshaheed

Anisotropic Wave Behavior in Isotropic Material With Orthogonal Surface Perturbation , Khaleda Akter

Preferential Vaporization Potential of Crude Oils and its Impact on Flame Flashback Behaviors , Ayuob Al wahaibi

Reduced Order Modeling Based on Hybrid Snapshot Simulation , Feng Bai

Leveraging Digital Transformation to Build the Technology Of Tomorrow Using Yesterday’s Equipment , Evan Barnett

A Multi Physics Integrated Solution for a High-pressure Stage Turbine Efficiency and Durability , Sanjay Chopra

Mechanical Strength of Sic Composite Tubing Under Uniaxial and Multiaxial Loading , Colton Corley

Purification of Uranium Tetrafluoride Using Ammonium Bifluoride , Kyle Robert Foster

Fabrication and Characterization of Micro/Nanostructured Ceramic Device for Energy Conversion , Yun Gan

An Acoustic Emission and Artificial Intelligence Approach to Structural Health Monitoring for Aerospace Application , Joseph Chandler Garrett

Optimizing Heat Pipes With Partially-Hybrid Mesh-Groove Wicking Structures and Its Capillary-Flowing Analysis by Simulation , Guanghan Huang

Nondestructive Evaluation and Structural Health Monitoring of Manufacturing Flaws and Operational Damage in Composite Structures , Robin James

Prediction of Residual Stress and Distortion in Laser Powder Bed Fusion Additive Manufacturing , Bhanuprakash Sairam Kosaraju

Instrumentation and Experimentation Development for Robotic Systems , Tristan Kyzer

Enhanced Flow Boiling and Bubble Dynamics with HFE7100 & DI Water in Interconnected Microchannels , Jiaxuan Ma

Development of Acoustic Metamaterial Noise Barriers and Simultaneously Harvesting Energy Using Smart Materials , Fariha Mir

Development of a Rapid Compression and Expansion Machine To Characterize the Ignition Propensity of Multi-Component Liquid Fuels , Jonathan Joseph Morreale

Searching Extreme Mechanical Properties Using Active Machine Learning and Density Functional Theory , Joshua Ojih

Effect of Crystal Size on the Failure Mechanics Of Polymer Bonded Explosives , Chizoba Onwuka

Experimental Investigation of Single and Two-Phase Heat Transfer Performance in Microchannels with Surface Modifications and Multiple Inlet Restrictors , Saad Kadham Oudah

Separate Effects Tests for Studying Thermal Gradient Driven Cracking in UO 2 Pellets Undergoing Resistive Heating , Sobhan Patnaik

Effects of Overmolding Process Parameters on Bondzone Quality , Vivek Varma Penumetsa

An Investigation of the Ignition Propensities of Fuels Perturbed by Nitrogen Monoxide , Ackmer Robinson III

Multimodal Robotic Health in Future Factories Through IIot, Data Analytics, and Virtual Commissioning , Clint Saidy

Grafting Based Thermoplastic-Thermoset Bonding for Aerospace Structures , Saurabh Vaidya

Simulation-Based and Data-Driven Approaches to Industrial Digital Twinning Towards Autonomous Smart Manufacturing Systems , Kaishu Xia

Multi-Fidelity Surrogate and Reduced-Order Model-Based Microfluidic Concentration Gradient Generator Design , Haizhou Yang

Implementation of Stereo Digital Image Correlation for In-Plane Strain Measurements to Quantify the Anisotropic Behavior, Plastic Flow, and Strain Hardening of Extruded Aluminum Alloy , Farzana Yasmeen

Application of Digital Transformation in the Water Desalination Industry to Develop Smart Desalination Plants , Ibrahim Yousif

Theses/Dissertations from 2020 2020

Fundamental Understanding of Plasma Discharge Formation in Liquid and Multiphase Configurations Through Multiphysics Modeling , Ali Charchi Aghdam

Acoustic and Ultrasonic Beam Focusing Through Aberrative and Attenuative Layers , Hossain Ahmed

Kinetic and Multidimensional Transport Coupled Numerical Investigation of Nox Formation During Syngas and Natural Gas Combustion , Sheikh Farhan Ahmed

Efficient Design Optimization Methodology for Manufacturable Variable Stiffness Laminated Composite Structures , Mazen Albazzan

Design and Testing of a Supercritical Carbon Dioxide Plasma Reactor , Gregory Belk

Artificial Intelligence Approaches for Structural Health Monitoring of Aerospace Structures , Kimberly A. Cardillo

Autonomous Drone-Based Sensor Package Deployment to the Underside of Structures , Sabrina Rose Carroll

Development of a CFD Model for the Drying of Aluminum-clad Spent Nuclear Fuel , Nathaniel Cooper

Local Eigenvalue Modification Procedure for Real-Time Model Updating of Structures Experiencing High-Rate Dynamic Events , Claire Rae Drnek

Damage Evaluation of Rolling Element Bearings for Shipboard Machinery , Brenna Lyn Feirer

Automation of Process Planning for Automated Fiber Placement , Joshua A. Halbritter

Acoustic Emission and Guided Wave Modeling and Experiments for Structural Health Monitoring and Non-Destructive Evaluation , Roshan Prakash Joseph

Lamb Wave Nondestructive Evaluation and Imaging on Plate-Like Structures , Zhaoyun Ma

Guided-Wave SHM and NDE of Composite Structures: Modeling and Experiments , Hanfei Mei

Effects of Material Characteristics and Equipment Configuration on Profilometry Scanning Results for Error Mitigation in Automated Fiber Placement , Jacob Ondeck

Steady-State and Transient Study of Flow Boiling in Microchannels With Microgrooves/Micronozzles , Congcong Ren

Strain Components in Friction Stir Extrusion , Megan Ryan

Design of Bio-Inspired Multifrequency Acoustic Sensors and Metamaterial Energy Harvesting Smart Structures , Mohammadsadegh Saadatzi

Influence of Dynamic Multiaxial Transverse Loading on Ultrahigh Molecular Weight Polyethylene Single Fiber Failure , Frank David Thomas

The Manufacturing and Characterization of Pseudo-Woven Carbon Fiber Composite Architectures for Enhanced Damage Tolerance , Cyrus Vakili Rad

Tow-Path Characterization for Automated Fiber Placement , Roudy Wehbe

Exploration and Evaluation of Novel Cathode Materials for Intermediate-to-Low Temperature Solid Oxide Fuel Cells , Chunyang Yang

Enhancing Single and Two-Phase Heat Transfer of Microgap Heat Sinks Using Nano-Structure Coatings , Yueyang Zhao

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Submissions

• Give us Feedback
• University Libraries

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

M.S. in Mechanical Engineering (MSME)

To be unconditionally admitted to the M.S. thesis or non-thesis program, an applicant should have:

• a Bachelor's degree in Mechanical Engineering or in a related field, preferably from an accredited engineering program.
• a grade point average of at least 3.00 out of 4.00 on the last 60 semester credit hours attempted exclusive of grades received for activities such as seminars, physical education, industrial internships, etc. ( GPA Calculator )
• an adequate score on the Graduate Record Examination (GRE). Texas law prohibits the definition of minimum acceptable scores on the GRE. However, 160 to 163 is a typical average score on the Quantitative section across all degree programs for an admission class.
• a minimum score of 6.5 on the IELTS or 79 on the internet-based TOEFL examination for students whose native language is not English.
• three letters of recommendation attesting to the student’s capacity to perform in the classroom and (for applicants to the thesis program) in a research capacity. A minimum of two letters should be from tenure-track faculty members who have observed the academic performance of the applicant, and one can come from an engineering industry supervisor.
• a statement of purpose that is consistent with the areas of instruction and (for applicants to the thesis program) the current research areas within the Department. The “Application for Financial Aid and Statement of Purpose” form available on the Application section of this website allows the applicant to specify areas of interest, and it lists issues to address in the statement of purpose.

Acceptance to the program is based on a competitive combination of academic background, GRE scores, and recommendation letters and Statement of Purpose. Domestic applicants who are not clearly competitive in all three areas may be admitted on a conditional basis at the discretion of the Director of Admissions. Nonimmigrant visa holders may not be admitted conditionally.

Program of Study for the M.S. Program with Thesis

The program requires completion of a minimum of 30 credit hours distributed as follows:

• Nine hours of thesis credits (the first three for MECE 6399, the remaining for MECE 7399).
• Three hours from the course MECE 6384 Methods of Applied Mathematics I.
• Controls: MECE 6367 Control Systems Analysis and Design; MECE 6388: Optimal Control Theory; MECE 7361 System Identification.
• Materials: MECE 6361 Mechanical Behavior of Materials; MECE 6363 Physical Metallurgy; MECE 6364: Phase Transform in Materials.
• Mechanics: MECE 6377 Continuum Mechanics I; MECE 7397: Continuum Mechanics II.
• Thermo-Fluids: MECE 6334 Convection Heat Transfer; MECE 6345 Fluid Dynamics I.
• The remaining hours can be chosen from either MECE courses at 6000-level or above or a list of approved courses in the College of Engineering, the College of Natural Science and Mathematics, the Bauer College of Business, and the UH Law Center at 6000-level or above. If you choose non-MECE courses, no more than three hours from one academic unit (department or program) will be allowed. Click here  for the up-to-date list of approved courses.

If a graduate course is dual-listed with an undergraduate 5000-level section, the student must enroll in the graduate section . Approval of any course that falls outside of the description given here must be requested by petition to the Director of Graduate Studies. Approval must be received prior to enrollment in the course.

The graduation requirements for this program are a successfully defended thesis and at least a 3.00 grade point average over all courses. The Director of Graduate Studies must approve the composition of the thesis examining committee prior to the defense date. The committee consists of at least three tenure-track faculty members, with one member from outside the Department.

Defense Guidelines

Program of Study for the M.S. Program without Thesis

The program requires successful completion of 30 hours of course work distributed as follows:

• Controls: MECE 6367 Control Systems Analysis and Design; MECE 6374: Nonlinear Control Systems.
• Mechanics: MECE 6377 Continuum Mechanics I; MECE 7397 Advanced Mechanics of Solids.
• Nine hours of elective courses from the MECE 6000-level or above, exclusive of graduate seminar (MECE 6111) and Graduate Project (MECE 6368).
• The remaining hours can be chosen from either MECE courses at 6000-level or above or a list of approved courses in the College of Engineering, the College of Natural Science and Mathematics, the Bauer College of Business, and the UH Law Center at 6000-level or above. If you choose non-MECE courses, no more than three hours from one academic unit (department or program) will be allowed. Click here  for the up-to-date list of approved courses. Three hours can be satisfied by completing the directed-study Graduate Project course, MECE 6368. A statement of the intent of the directed study must be approved by petition to the Graduate Director prior to registration in MECE 6368. A report describing the results of the project must be filed with, and archived by, the instructor at the end of the course.

If a graduate course is dual-listed with an undergraduate 5000-level section, the student must enroll in the graduate section. Approval of any course that falls outside of the description given here must be requested by petition to the Director of Graduate Studies. Approval must be received prior to enrollment in the course. Non-thesis students should not enroll in research or thesis courses (6x98, 6399, 7399).

The graduation requirements for this program are at least a 3.00 grade point average over all courses, and separately, at least a 3.00 grade point average on all MECE courses, including MECE 6384. In calculating the grade point average on MECE courses, if a student receives a grade “C+” or lower on an MECE course, and repeats the course (or takes an equivalent course approved by the Director of Graduate Study) with a better grade, the lower grade is dropped in the calculation.

Thesis students should be advised of the following:

M.S. Thesis Option.  The Mechanical Engineering, MS thesis option requires the completion of 9 hours of thesis credits (MECE 6399, MECE 7399, and MECE 7399) Only one MECE 7399 course can be taken per semester, so please plan accordingly.  An S or U grade must be assigned to every thesis course until the thesis is successfully completed (defended and submitted).  A final letter grade via grade change request will be assigned to the required number of thesis hours once the student has successfully completed the thesis (defended and submitted).  In case a student registers for thesis hours over and above the nine hours that are required, these additional hours will remain as S or U on the student’s transcript.  This is a Graduate School directive and aimed at avoiding grade inflation.

• Message from the Interim Chair
• UH Calendar
• Open Positions
• Pathway Professor
• Research Areas
• Faculty Expertise
• Laboratories & Facilities
• Centers and Consortia
• CTFM Seminars
• Theses and Dissertations
• Industrial Relations
• Accreditation
• Program Administration
• Curriculum Flow Chart
• Advising Information
• Societies & Organizations
• Capstone Design
• Scholarships
• Accelerated BS/MS
• Degree Programs
• Online Graduate Degrees
• Non-Degree Certificate Programs
• Graduate Courses
• Degree Plans
• Graduate Student Association
• UH-Extend Online ME Graduate Programs
• Online Programs at the Cullen College
• Momentum Magazine

Your version of Internet Explorer is either running in "Compatibility View" or is too outdated to display this site. If you believe your version of Internet Explorer is up to date, please remove this site from Compatibility View by opening Tools > Compatibility View settings (IE11) or clicking the broken page icon in your address bar (IE9, IE10)

Missouri S&T Missouri S&T

• Future Students
• Current Students
• Faculty and Staff
• mae.mst.edu
• Current Student Resources
• MS in Mechanical Engineering - Thesis Option

Mechanical and Aerospace Engineering

• (573) 341-4661
• [email protected]

Masters of Science in Mechanical Engineering (Thesis Option)

Admission requirements.

Please contact Admissions at [email protected] for admission requirements.

Selecting a Graduate Advisor

The Associate Chair for Graduate Affairs will advise the student regarding his/her academic program during the first semester, or until the student selects a Graduate Advisor. When a student selects a Graduate Advisor, the student must submit a Graduate Advisor Form to the Associate Chair for Graduate Affairs. In situations where two faculty members are actively involved in advising a student, the student may have a Graduate Advisor and a Graduate Co–Advisor. After the student selects a Graduate Advisor, the responsibility of advising the student in regards to his/her academic and research programs will reside with the Graduate Advisor until the student graduates. The Graduate Advisor or Co–Advisor must be a faculty member of the Mechanical and Aerospace Engineering (MAE) Department.

A graduate student is strongly discouraged from changing graduate advisors. When an unavoidable circumstance arises and warrants consideration for a change, the student and his/her Graduate Advisor must meet with the Associate Chair for Graduate Affairs to resolve the issue before the student may select another Graduate Advisor.

Program Requirements

In order to obtain a Masters of Science degree (thesis option) in Mechanical Engineering, a student must:

• complete at least 30 total credit hours
• complete at least 21 credit hours of lecture courses
• complete at least 6 credit hours of ME 6099
• complete at least 9 credit hours of lecture courses in the MAE department, at least 3 credit hours of which is at the 6xxx level
• complete at least 3 credit hours of mathematics, statistics, or computer science; AE/ME: 5830 Applied Computational Methods may be used to satisfy this requirement
• complete at least 6 credit hours of 6xxx lecture courses
• complete thesis (see below)
• pass oral examination (see below)
• meet seminar requirements (see below)

No course below the 5xxx level may be applied to the degree requirements. A graduate student accumulating 10 or more credit hours of C and F grades shall no longer be a candidate for an advanced degree from Missouri S&T.

In order to earn a graduate degree, all students must achieve a cumulative GPA of 3.0 or higher in all graduate work taken at Missouri S&T, as well as for all graduate courses listed on the program of study (Form 1 for master’s students and Form 5 for doctoral students).

Thesis Requirements

The thesis is a document embodying the results of the student’s original investigation under the guidance of his/her Advisory Committee. It is expected that this document will yield scholarly products, typically one or more articles worthy of publication in high-quality archival journals. The student’s Advisory Committee will examine the student’s thesis closely for both scientific content and format. The thesis must be formatted appropriately. Formatting specifications and further information regarding theses are available at Formatting Resources .

Oral Examination Requirements

The oral examination is an oral defense of the student’s thesis. When the thesis is completed, the student distributes a copy to each member of his/her Advisory Committee and arranges a time and place for the oral examination. Each Advisory Committee member should be allowed to examine the thesis for at least seven working days before the oral examination. In order for the student to pass the oral examination, every member of the student’s Advisory Committee must vote affirmatively. Further information regarding the oral examination is available in the Graduate Catalog .

Seminar Requirements

All graduate students are required to attend the Department Seminar Series. 

• Register for classes, after consulting with your Graduate Advisor, before each semester. If you do not have a Graduate Advisor, the Associate Chair for Graduate Affairs will act as your academic advisor until you select a Graduate Advisor. It is expected that you will select a Graduate Advisor before the end of your second semester at the latest. Once you select a Graduate Advisor, you submit the Graduate Advisor Form to the Associate Chair for Graduate Affairs.
• Select, in consultation with your Graduate Advisor, your Advisory Committee. This committee will consist of at least three faculty members, including your Graduate Advisor. At least one half of your Advisory Committee must belong to the graduate faculty. The Chair of the Advisory Committee is your Graduate Advisor.
• Complete, in consultation with your Graduate Advisor, Graduate Form 1 . This form lists all of the courses you have taken and plan to take, as well as your Advisory Committee members. Your Graduate Form 1 must be submitted to the Associate Chair for Graduate Affairs within the semester in which you take your 9th graduate credit hour. If there are any changes in your coursework or Advisory Committee, you must submit Graduate Form 1A . This form should be done once you are absolutely sure there will be no further changes. The Graduate Form 1 (thesis) Checklist can be used to aid this process.
• Submit the Application for Graduation on Joe'SS by the end of the fourth week of the semester in which you will graduate (second week if you plan to graduate in the Summer semester).
• Select the date, time, and place of your oral examination, in consultation with your Graduate Advisor. Note: you must be enrolled the semester in which you take your oral examination. Your Graduate Advisor reports the results of your oral examination by submitting Graduate Form 2 to the Associate Chair for Graduate Affairs.
• Submit a final copy of your thesis to the Graduate Education .

Pre-Graduation Checklist

The following pre-graduation checklist can be used to plan the final steps of your program: Graduation Checklist MS Thesis

Follow Mechanical and Aerospace Engineering

Some results uranium dioxide powder structure investigation

• Processes of Obtaining and Properties of Powders
• Published: 28 June 2009
• Volume 50 , pages 281–285, ( 2009 )

Cite this article

• E. I. Andreev 1 ,
• K. V. Glavin 2 ,
• A. V. Ivanov 3 ,
• V. V. Malovik 3 ,
• V. V. Martynov 3 &
• V. S. Panov 2  

116 Accesses

7 Citations

Explore all metrics

Features of the macrostructure and microstructure of uranium dioxide powders are considered. Assumptions are made on the mechanisms of the behavior of powders of various natures during pelletizing. Experimental data that reflect the effect of these powders on the quality of fuel pellets, which is evaluated by modern procedures, are presented. To investigate the structure of the powders, modern methods of electron microscopy, helium pycnometry, etc., are used. The presented results indicate the disadvantages of wet methods for obtaining the starting UO 2 powders by the ammonium diuranate (ADU) flow sheet because strong agglomerates and conglomerates, which complicate the process of pelletizing, are formed. The main directions of investigation that can lead to understanding the regularities of formation of the structure of starting UO 2 powders, which will allow one to control the process of their fabrication and stabilize the properties of powders and pellets, are emphasized.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Russian Federation)

Instant access to the full article PDF.

Rent this article via DeepDyve

Institutional subscriptions

Similar content being viewed by others

Investigation of the Properties of Uranium-Molybdenum Pellet Fuel for VVER

Investigation of the Influence of the Energy of Thermal Plasma on the Morphology and Phase Composition of Aluminosilicate Microspheres

Evaluation of the possibility of fabricating uranium-molybdenum fuel for vver by powder metallurgy methods.

Patlazhan, S.A., Poristost’ i mikrostruktura sluchainykh upakovok tverdykh sharov raznykh razmerov (Porosity and Microstructure of Chaotic Packings of Solid Spheres of Different Sizes), Chernogolovka: IKhF RAN, 1993.

Google Scholar  

Andreev, E.I., Bocharov, A.S., Ivanov, A.V., et al., Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall. , 2003, no. 1, p. 48.

Assmann, H., Dörr, W., and Peehs, M., “Control of HO 2 Microstructure by Oxidative Sintering,” J. Nucl. Mater. , 1986, vol. 140,issue 1, pp. 1–6.

Article   ADS   CAS   Google Scholar  

Download references

Author information

Authors and affiliations.

Elektrostal’ Polytechnical Institute (Branch), Moscow Institute of Steel and Alloys, ul. Pervomaiskaya 7, Elektrostal’, Moscow oblast, 144000, Russia

E. I. Andreev

Moscow Institute of Steel and Alloys (State Technical University), Leninskii pr. 4, Moscow, 119049, Russia

K. V. Glavin & V. S. Panov

JSC “Mashinostroitelny Zavod”, ul. K. Marksa 12, Elektrostal’, Moscow oblast, 144001, Russia

A. V. Ivanov, V. V. Malovik & V. V. Martynov

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to K. V. Glavin .

Additional information

Original Russian Text © E.I. Andreev, K.V. Glavin, A.V. Ivanov, V.V. Malovik, V.V. Martynov, V.S. Panov, 2009, published in Izvestiya VUZ. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 2008, No. 4, pp. 19–24.

About this article

Andreev, E.I., Glavin, K.V., Ivanov, A.V. et al. Some results uranium dioxide powder structure investigation. Russ. J. Non-ferrous Metals 50 , 281–285 (2009). https://doi.org/10.3103/S1067821209030183

Download citation

Published : 28 June 2009

Issue Date : June 2009

DOI : https://doi.org/10.3103/S1067821209030183

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• nuclear fuel
• uranium dioxide
• uranium protoxide-oxide
• crystallite
• agglomerate
• conglomerate
• surface morphology
• ADU-ammonium diuranate
• Find a journal
• Publish with us
• Track your research