science conclusion writer

When you choose to publish with PLOS, your research makes an impact. Make your work accessible to all, without restrictions, and accelerate scientific discovery with options like preprints and published peer review that make your work more Open.

• PLOS Biology
• PLOS Climate
• PLOS Complex Systems
• PLOS Computational Biology
• PLOS Digital Health
• PLOS Genetics
• PLOS Global Public Health
• PLOS Medicine
• PLOS Mental Health
• PLOS Neglected Tropical Diseases
• PLOS Pathogens
• PLOS Sustainability and Transformation
• PLOS Collections
• How to Write Discussions and Conclusions

The discussion section contains the results and outcomes of a study. An effective discussion informs readers what can be learned from your experiment and provides context for the results.

What makes an effective discussion?

When you’re ready to write your discussion, you’ve already introduced the purpose of your study and provided an in-depth description of the methodology. The discussion informs readers about the larger implications of your study based on the results. Highlighting these implications while not overstating the findings can be challenging, especially when you’re submitting to a journal that selects articles based on novelty or potential impact. Regardless of what journal you are submitting to, the discussion section always serves the same purpose: concluding what your study results actually mean.

A successful discussion section puts your findings in context. It should include:

• the results of your research,
• a discussion of related research, and
• a comparison between your results and initial hypothesis.

Tip: Not all journals share the same naming conventions.

You can apply the advice in this article to the conclusion, results or discussion sections of your manuscript.

Our Early Career Researcher community tells us that the conclusion is often considered the most difficult aspect of a manuscript to write. To help, this guide provides questions to ask yourself, a basic structure to model your discussion off of and examples from published manuscripts. 

Questions to ask yourself:

• Was my hypothesis correct?
• If my hypothesis is partially correct or entirely different, what can be learned from the results? 
• How do the conclusions reshape or add onto the existing knowledge in the field? What does previous research say about the topic? 
• Why are the results important or relevant to your audience? Do they add further evidence to a scientific consensus or disprove prior studies? 
• How can future research build on these observations? What are the key experiments that must be done? 
• What is the “take-home” message you want your reader to leave with?

How to structure a discussion

Trying to fit a complete discussion into a single paragraph can add unnecessary stress to the writing process. If possible, you’ll want to give yourself two or three paragraphs to give the reader a comprehensive understanding of your study as a whole. Here’s one way to structure an effective discussion:

Writing Tips

While the above sections can help you brainstorm and structure your discussion, there are many common mistakes that writers revert to when having difficulties with their paper. Writing a discussion can be a delicate balance between summarizing your results, providing proper context for your research and avoiding introducing new information. Remember that your paper should be both confident and honest about the results! 

• Read the journal’s guidelines on the discussion and conclusion sections. If possible, learn about the guidelines before writing the discussion to ensure you’re writing to meet their expectations. 
• Begin with a clear statement of the principal findings. This will reinforce the main take-away for the reader and set up the rest of the discussion. 
• Explain why the outcomes of your study are important to the reader. Discuss the implications of your findings realistically based on previous literature, highlighting both the strengths and limitations of the research. 
• State whether the results prove or disprove your hypothesis. If your hypothesis was disproved, what might be the reasons? 
• Introduce new or expanded ways to think about the research question. Indicate what next steps can be taken to further pursue any unresolved questions. 
• If dealing with a contemporary or ongoing problem, such as climate change, discuss possible consequences if the problem is avoided. 
• Be concise. Adding unnecessary detail can distract from the main findings. 

Don’t

• Rewrite your abstract. Statements with “we investigated” or “we studied” generally do not belong in the discussion. 
• Include new arguments or evidence not previously discussed. Necessary information and evidence should be introduced in the main body of the paper. 
• Apologize. Even if your research contains significant limitations, don’t undermine your authority by including statements that doubt your methodology or execution. 
• Shy away from speaking on limitations or negative results. Including limitations and negative results will give readers a complete understanding of the presented research. Potential limitations include sources of potential bias, threats to internal or external validity, barriers to implementing an intervention and other issues inherent to the study design. 
• Overstate the importance of your findings. Making grand statements about how a study will fully resolve large questions can lead readers to doubt the success of the research. 

Snippets of Effective Discussions:

Consumer-based actions to reduce plastic pollution in rivers: A multi-criteria decision analysis approach

Identifying reliable indicators of fitness in polar bears

• How to Write a Great Title
• How to Write an Abstract
• How to Write Your Methods
• How to Report Statistics
• How to Edit Your Work

The contents of the Peer Review Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

The contents of the Writing Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

There’s a lot to consider when deciding where to submit your work. Learn how to choose a journal that will help your study reach its audience, while reflecting your values as a researcher…

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• Science Writing

How to Write a Good Lab Conclusion in Science

Last Updated: March 21, 2024 Fact Checked

This article was co-authored by Bess Ruff, MA . Bess Ruff is a Geography PhD student at Florida State University. She received her MA in Environmental Science and Management from the University of California, Santa Barbara in 2016. She has conducted survey work for marine spatial planning projects in the Caribbean and provided research support as a graduate fellow for the Sustainable Fisheries Group. There are 11 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 1,763,105 times.

A lab report describes an entire experiment from start to finish, outlining the procedures, reporting results, and analyzing data. The report is used to demonstrate what has been learned, and it will provide a way for other people to see your process for the experiment and understand how you arrived at your conclusions. The conclusion is an integral part of the report; this is the section that reiterates the experiment’s main findings and gives the reader an overview of the lab trial. Writing a solid conclusion to your lab report will demonstrate that you’ve effectively learned the objectives of your assignment.

Outlining Your Conclusion

• Restate : Restate the lab experiment by describing the assignment.
• Explain : Explain the purpose of the lab experiment. What were you trying to figure out or discover? Talk briefly about the procedure you followed to complete the lab.
• Results : Explain your results. Confirm whether or not your hypothesis was supported by the results.
• Uncertainties : Account for uncertainties and errors. Explain, for example, if there were other circumstances beyond your control that might have impacted the experiment’s results.
• New : Discuss new questions or discoveries that emerged from the experiment.

• Your assignment may also have specific questions that need to be answered. Make sure you answer these fully and coherently in your conclusion.

Discussing the Experiment and Hypothesis

• If you tried the experiment more than once, describe the reasons for doing so. Discuss changes that you made in your procedures.
• Brainstorm ways to explain your results in more depth. Go back through your lab notes, paying particular attention to the results you observed. [5] X Trustworthy Source University of North Carolina Writing Center UNC's on-campus and online instructional service that provides assistance to students, faculty, and others during the writing process Go to source

• Start this section with wording such as, “The results showed that…”
• You don’t need to give the raw data here. Just summarize the main points, calculate averages, or give a range of data to give an overall picture to the reader.
• Make sure to explain whether or not any statistical analyses were significant, and to what degree, such as 1%, 5%, or 10%.

• Use simple language such as, “The results supported the hypothesis,” or “The results did not support the hypothesis.”

Demonstrating What You Have Learned

• If it’s not clear in your conclusion what you learned from the lab, start off by writing, “In this lab, I learned…” This will give the reader a heads up that you will be describing exactly what you learned.
• Add details about what you learned and how you learned it. Adding dimension to your learning outcomes will convince your reader that you did, in fact, learn from the lab. Give specifics about how you learned that molecules will act in a particular environment, for example.
• Describe how what you learned in the lab could be applied to a future experiment.

• On a new line, write the question in italics. On the next line, write the answer to the question in regular text.

• If your experiment did not achieve the objectives, explain or speculate why not.

Wrapping Up Your Conclusion

• If your experiment raised questions that your collected data can’t answer, discuss this here.

• Describe what is new or innovative about your research.
• This can often set you apart from your classmates, many of whom will just write up the barest of discussion and conclusion.

Finalizing Your Lab Report

Community Q&A

• If you include figures or tables in your conclusion, be sure to include a brief caption or label so that the reader knows what the figures refer to. Also, discuss the figures briefly in the text of your report. Thanks Helpful 0 Not Helpful 0
• Once again, avoid using personal pronouns (I, myself, we, our group) in a lab report. The first-person point-of-view is often seen as subjective, whereas science is based on objectivity. Thanks Helpful 0 Not Helpful 0
• Ensure the language used is straightforward with specific details. Try not to drift off topic. Thanks Helpful 0 Not Helpful 0

• Take care with writing your lab report when working in a team setting. While the lab experiment may be a collaborative effort, your lab report is your own work. If you copy sections from someone else’s report, this will be considered plagiarism. Thanks Helpful 3 Not Helpful 0

You Might Also Like

• ↑ https://phoenixcollege.libguides.com/LabReportWriting/introduction
• ↑ https://www.hcs-k12.org/userfiles/354/Classes/18203/conclusionwriting.pdf
• ↑ https://www.education.vic.gov.au/school/teachers/teachingresources/discipline/english/literacy/Pages/puttingittogether.aspx
• ↑ https://writingcenter.unc.edu/tips-and-tools/brainstorming/
• ↑ https://advice.writing.utoronto.ca/types-of-writing/lab-report/
• ↑ http://www.socialresearchmethods.net/kb/hypothes.php
• ↑ https://libguides.usc.edu/writingguide/conclusion
• ↑ https://libguides.usc.edu/writingguide/introduction/researchproblem
• ↑ http://writingcenter.unc.edu/handouts/scientific-reports/
• ↑ https://phoenixcollege.libguides.com/LabReportWriting/labreportstyle
• ↑ https://writingcenter.unc.edu/tips-and-tools/editing-and-proofreading/

About This Article

To write a good lab conclusion in science, start with restating the lab experiment by describing the assignment. Next, explain what you were trying to discover or figure out by doing the experiment. Then, list your results and explain how they confirmed or did not confirm your hypothesis. Additionally, include any uncertainties, such as circumstances beyond your control that may have impacted the results. Finally, discuss any new questions or discoveries that emerged from the experiment. For more advice, including how to wrap up your lab report with a final statement, keep reading. Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Maddie Briere

Oct 5, 2017

Did this article help you?

Jun 13, 2017

Saujash Barman

Sep 7, 2017

Cindy Zhang

Jan 16, 2017

Oct 29, 2017

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help Pro:

Level up your tech skills and stay ahead of the curve

Get science-backed answers as you write with Paperpal's Research feature

How to Write a Conclusion for Research Papers (with Examples)

The conclusion of a research paper is a crucial section that plays a significant role in the overall impact and effectiveness of your research paper. However, this is also the section that typically receives less attention compared to the introduction and the body of the paper. The conclusion serves to provide a concise summary of the key findings, their significance, their implications, and a sense of closure to the study. Discussing how can the findings be applied in real-world scenarios or inform policy, practice, or decision-making is especially valuable to practitioners and policymakers. The research paper conclusion also provides researchers with clear insights and valuable information for their own work, which they can then build on and contribute to the advancement of knowledge in the field.

The research paper conclusion should explain the significance of your findings within the broader context of your field. It restates how your results contribute to the existing body of knowledge and whether they confirm or challenge existing theories or hypotheses. Also, by identifying unanswered questions or areas requiring further investigation, your awareness of the broader research landscape can be demonstrated.

Remember to tailor the research paper conclusion to the specific needs and interests of your intended audience, which may include researchers, practitioners, policymakers, or a combination of these.

Table of Contents

What is a conclusion in a research paper, summarizing conclusion, editorial conclusion, externalizing conclusion, importance of a good research paper conclusion, how to write a conclusion for your research paper, research paper conclusion examples.

• How to write a research paper conclusion with Paperpal? 

Frequently Asked Questions

A conclusion in a research paper is the final section where you summarize and wrap up your research, presenting the key findings and insights derived from your study. The research paper conclusion is not the place to introduce new information or data that was not discussed in the main body of the paper. When working on how to conclude a research paper, remember to stick to summarizing and interpreting existing content. The research paper conclusion serves the following purposes: 1

• Warn readers of the possible consequences of not attending to the problem.
• Recommend specific course(s) of action.
• Restate key ideas to drive home the ultimate point of your research paper.
• Provide a “take-home” message that you want the readers to remember about your study.

Types of conclusions for research papers

In research papers, the conclusion provides closure to the reader. The type of research paper conclusion you choose depends on the nature of your study, your goals, and your target audience. I provide you with three common types of conclusions:

A summarizing conclusion is the most common type of conclusion in research papers. It involves summarizing the main points, reiterating the research question, and restating the significance of the findings. This common type of research paper conclusion is used across different disciplines.

An editorial conclusion is less common but can be used in research papers that are focused on proposing or advocating for a particular viewpoint or policy. It involves presenting a strong editorial or opinion based on the research findings and offering recommendations or calls to action.

An externalizing conclusion is a type of conclusion that extends the research beyond the scope of the paper by suggesting potential future research directions or discussing the broader implications of the findings. This type of conclusion is often used in more theoretical or exploratory research papers.

Align your conclusion’s tone with the rest of your research paper. Start Writing with Paperpal Now!  

The conclusion in a research paper serves several important purposes:

• Offers Implications and Recommendations : Your research paper conclusion is an excellent place to discuss the broader implications of your research and suggest potential areas for further study. It’s also an opportunity to offer practical recommendations based on your findings.
• Provides Closure : A good research paper conclusion provides a sense of closure to your paper. It should leave the reader with a feeling that they have reached the end of a well-structured and thought-provoking research project.
• Leaves a Lasting Impression : Writing a well-crafted research paper conclusion leaves a lasting impression on your readers. It’s your final opportunity to leave them with a new idea, a call to action, or a memorable quote.

Writing a strong conclusion for your research paper is essential to leave a lasting impression on your readers. Here’s a step-by-step process to help you create and know what to put in the conclusion of a research paper: 2

• Research Statement : Begin your research paper conclusion by restating your research statement. This reminds the reader of the main point you’ve been trying to prove throughout your paper. Keep it concise and clear.
• Key Points : Summarize the main arguments and key points you’ve made in your paper. Avoid introducing new information in the research paper conclusion. Instead, provide a concise overview of what you’ve discussed in the body of your paper.
• Address the Research Questions : If your research paper is based on specific research questions or hypotheses, briefly address whether you’ve answered them or achieved your research goals. Discuss the significance of your findings in this context.
• Significance : Highlight the importance of your research and its relevance in the broader context. Explain why your findings matter and how they contribute to the existing knowledge in your field.
• Implications : Explore the practical or theoretical implications of your research. How might your findings impact future research, policy, or real-world applications? Consider the “so what?” question.
• Future Research : Offer suggestions for future research in your area. What questions or aspects remain unanswered or warrant further investigation? This shows that your work opens the door for future exploration.
• Closing Thought : Conclude your research paper conclusion with a thought-provoking or memorable statement. This can leave a lasting impression on your readers and wrap up your paper effectively. Avoid introducing new information or arguments here.
• Proofread and Revise : Carefully proofread your conclusion for grammar, spelling, and clarity. Ensure that your ideas flow smoothly and that your conclusion is coherent and well-structured.

Write your research paper conclusion 2x faster with Paperpal. Try it now!

Remember that a well-crafted research paper conclusion is a reflection of the strength of your research and your ability to communicate its significance effectively. It should leave a lasting impression on your readers and tie together all the threads of your paper. Now you know how to start the conclusion of a research paper and what elements to include to make it impactful, let’s look at a research paper conclusion sample.

How to write a research paper conclusion with Paperpal?

A research paper conclusion is not just a summary of your study, but a synthesis of the key findings that ties the research together and places it in a broader context. A research paper conclusion should be concise, typically around one paragraph in length. However, some complex topics may require a longer conclusion to ensure the reader is left with a clear understanding of the study’s significance. Paperpal, an AI writing assistant trusted by over 800,000 academics globally, can help you write a well-structured conclusion for your research paper. 

• Sign Up or Log In: Create a new Paperpal account or login with your details.  
• Navigate to Features : Once logged in, head over to the features’ side navigation pane. Click on Templates and you’ll find a suite of generative AI features to help you write better, faster.  
• Generate an outline: Under Templates, select ‘Outlines’. Choose ‘Research article’ as your document type.  
• Select your section: Since you’re focusing on the conclusion, select this section when prompted.  
• Choose your field of study: Identifying your field of study allows Paperpal to provide more targeted suggestions, ensuring the relevance of your conclusion to your specific area of research. 
• Provide a brief description of your study: Enter details about your research topic and findings. This information helps Paperpal generate a tailored outline that aligns with your paper’s content. 
• Generate the conclusion outline: After entering all necessary details, click on ‘generate’. Paperpal will then create a structured outline for your conclusion, to help you start writing and build upon the outline.  
• Write your conclusion: Use the generated outline to build your conclusion. The outline serves as a guide, ensuring you cover all critical aspects of a strong conclusion, from summarizing key findings to highlighting the research’s implications. 
• Refine and enhance: Paperpal’s ‘Make Academic’ feature can be particularly useful in the final stages. Select any paragraph of your conclusion and use this feature to elevate the academic tone, ensuring your writing is aligned to the academic journal standards. 

By following these steps, Paperpal not only simplifies the process of writing a research paper conclusion but also ensures it is impactful, concise, and aligned with academic standards. Sign up with Paperpal today and write your research paper conclusion 2x faster .  

The research paper conclusion is a crucial part of your paper as it provides the final opportunity to leave a strong impression on your readers. In the research paper conclusion, summarize the main points of your research paper by restating your research statement, highlighting the most important findings, addressing the research questions or objectives, explaining the broader context of the study, discussing the significance of your findings, providing recommendations if applicable, and emphasizing the takeaway message. The main purpose of the conclusion is to remind the reader of the main point or argument of your paper and to provide a clear and concise summary of the key findings and their implications. All these elements should feature on your list of what to put in the conclusion of a research paper to create a strong final statement for your work.

A strong conclusion is a critical component of a research paper, as it provides an opportunity to wrap up your arguments, reiterate your main points, and leave a lasting impression on your readers. Here are the key elements of a strong research paper conclusion: 1. Conciseness : A research paper conclusion should be concise and to the point. It should not introduce new information or ideas that were not discussed in the body of the paper. 2. Summarization : The research paper conclusion should be comprehensive enough to give the reader a clear understanding of the research’s main contributions. 3 . Relevance : Ensure that the information included in the research paper conclusion is directly relevant to the research paper’s main topic and objectives; avoid unnecessary details. 4 . Connection to the Introduction : A well-structured research paper conclusion often revisits the key points made in the introduction and shows how the research has addressed the initial questions or objectives. 5. Emphasis : Highlight the significance and implications of your research. Why is your study important? What are the broader implications or applications of your findings? 6 . Call to Action : Include a call to action or a recommendation for future research or action based on your findings.

The length of a research paper conclusion can vary depending on several factors, including the overall length of the paper, the complexity of the research, and the specific journal requirements. While there is no strict rule for the length of a conclusion, but it’s generally advisable to keep it relatively short. A typical research paper conclusion might be around 5-10% of the paper’s total length. For example, if your paper is 10 pages long, the conclusion might be roughly half a page to one page in length.

In general, you do not need to include citations in the research paper conclusion. Citations are typically reserved for the body of the paper to support your arguments and provide evidence for your claims. However, there may be some exceptions to this rule: 1. If you are drawing a direct quote or paraphrasing a specific source in your research paper conclusion, you should include a citation to give proper credit to the original author. 2. If your conclusion refers to or discusses specific research, data, or sources that are crucial to the overall argument, citations can be included to reinforce your conclusion’s validity.

The conclusion of a research paper serves several important purposes: 1. Summarize the Key Points 2. Reinforce the Main Argument 3. Provide Closure 4. Offer Insights or Implications 5. Engage the Reader. 6. Reflect on Limitations

Remember that the primary purpose of the research paper conclusion is to leave a lasting impression on the reader, reinforcing the key points and providing closure to your research. It’s often the last part of the paper that the reader will see, so it should be strong and well-crafted.

• Makar, G., Foltz, C., Lendner, M., & Vaccaro, A. R. (2018). How to write effective discussion and conclusion sections. Clinical spine surgery, 31(8), 345-346.
• Bunton, D. (2005). The structure of PhD conclusion chapters.  Journal of English for academic purposes ,  4 (3), 207-224.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• 5 Reasons for Rejection After Peer Review
• Ethical Research Practices For Research with Human Subjects

7 Ways to Improve Your Academic Writing Process

• Paraphrasing in Academic Writing: Answering Top Author Queries

Preflight For Editorial Desk: The Perfect Hybrid (AI + Human) Assistance Against Compromised Manuscripts

You may also like, how to write a high-quality conference paper, academic editing: how to self-edit academic text with..., measuring academic success: definition & strategies for excellence, phd qualifying exam: tips for success , ai in education: it’s time to change the..., is it ethical to use ai-generated abstracts without..., what are journal guidelines on using generative ai..., quillbot review: features, pricing, and free alternatives, what is an academic paper types and elements , should you use ai tools like chatgpt for....

The website is not compatible for the version of the browser you are using. Not all the functionality may be available. Please upgrade your browser to the latest version.

• Social Media
• Access Points
• Print/Export Standards
• Standards Books
• Coding Scheme
• Standards Viewer App
• Course Descriptions
• Graduation Requirements
• Course Reports
• Gifted Coursework
• Career and Technical Education (CTE) Programs
• Browse/Search
• Original Student Tutorials
• MEAs - STEM Lessons
• Perspectives STEM Videos
• STEM Reading Resources
• Math Formative Assessments
• CTE Related Resources
• Our Review Process
• Professional Development Programs
• iCPALMS Tools
• Resource Development Programs
• Partnership Programs
• User Testimonials
• iCPALMS Account

• Not a member yet? SIGN UP
• Home of CPALMS
• Standards Info. & Resources
• Course Descriptions & Directory
• Resources Vetted by Peers & Experts
• PD Programs Self-paced Training
• About CPALMS Initiatives & Partnerships
• iCPALMS Florida's Platform

Science Research: Writing a Conclusion

Learn how to write a valid conclusion from a scientific investigation. In this interactive tutorial, you'll also learn how to answer questions using scientific reasoning. 

Attachments

General information, source and access information, aligned standards, related resources, congratulations, you have successfully created an account..

A verifications link was sent to your email at . Please check your email and click on the link to confirm your email address and fully activate your iCPALMS account. Please check your spam folder.

Did you enter an incorrect email address?

Did not receive an email, you have not completed your profile information. please take a few moments to complete the section below so we can customize your cpalms experience., there was an error creating your account. please contact support [email protected] for assistance., modal header, feedback form.

Please fill the following form and click "Submit" to send the feedback.

Your Email Address: *

Your comment : *, teacher rating, leave cpalms.

You are leaving the CPALMS website and will no longer be covered by our Terms and Conditions.

Stay in touch with CPALMS

Loading....

This website is trying to open a CPALMS page using an iFrame, which is against our terms of use . Click the link below to view the resource on CPALMS.org.

The Conclusion: How to End a Scientific Report in Style

• First Online: 26 April 2023

Cite this chapter

• Siew Mei Wu 3 ,
• Kooi Cheng Lee 3 &
• Eric Chun Yong Chan 4  

864 Accesses

Sometimes students have the mistaken belief that the conclusion of a scientific report is just a perfunctory ending that repeats what was presented in the main sections of the report. However, impactful conclusions fulfill a rhetorical function. Besides giving a closing summary, the conclusion reflects the significance of what has been uncovered and how this is connected to a broader issue. At the very least, the conclusion of a scientific report should leave the reader with a new perspective of the research area and something to think about.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

• Available as EPUB and PDF
• Read on any device
• Instant download
• Own it forever
• Durable hardcover edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Goh, Z.-H., Tee, J. K., & Ho, H. K. (2020). An Evaluation of the in vitro roles and mechanisms of silibinin in reducing pyrazinamide and isoniazid-induced hepatocellular damage. International Journal of Molecular Sciences, 21 , 3714–3734. https://doi.org/10.3390/ijms21103714

Article   CAS   PubMed   PubMed Central   Google Scholar  

Swales, J. M., & Feak, C. B. (2012). Academic writing for graduate students (3rd ed.). University of Michigan Press.

Book   Google Scholar  

Download references

Author information

Authors and affiliations.

Centre for English Language Communication, National University of Singapore, Singapore, Singapore

Siew Mei Wu & Kooi Cheng Lee

Pharmacy, National University of Singapore, Singapore, Singapore

Eric Chun Yong Chan

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Siew Mei Wu .

Editor information

Editors and affiliations.

School of Chemical and Molecular Biosciences, The University of Queensland, Brisbane, QLD, Australia

Susan Rowland

School of Biological Sciences, The University of Queensland, Brisbane, QLD, Australia

Louise Kuchel

Appendix 1: Tutorial Notes for Conclusion Activity

1.1 learning outcomes.

At the end of the tutorial, you should be able to:

Identify and demonstrate understanding of the roles of Conclusion section of research reports

Analyze the rhetorical moves of Conclusion and apply them effectively in research reports

1.2 Introduction

The Conclusion of a paper is a closing summary of what the report is about. The key role of a Conclusion is to provide a reflection on what has been uncovered during the course of the study and to reflect on the significance of what has been learned (Craswell & Poore, 2012). It should show the readers why all the analysis and information matters.

Besides having a final say on the issues in the report, a Conclusion allows the writer to do the following:

Demonstrate the importance of ideas presented through a synthesis of thoughts

Consider broader issues, make new connections, and elaborate on the significance of the findings

Propel the reader to a new view of the subject

Make a good final impression

End the paper on a positive note

(University of North Carolina at Chapel Hill, 2019)

In other words, a Conclusion gives the readers something to take away that will help them see things differently or appreciate the topic in new ways. It can suggest broader implications that will not only interest the readers, but also enrich their knowledge (Craswell & Poore, 2012), and leave them with something interesting to think about (University of North Carolina at Chapel Hill, 2019).

1.3 About the Conclusion Section

In most universities, undergraduate students, especially those in the last year of their programs, are required to document their research work in the form of a research report. The process of taking what you have done in the lab or from systematic review, and writing it for your academic colleagues is a highly structured activity that stretches and challenges the mind. Overall, a research paper should appeal to the academic community for whom you are writing and should cause the reader to want to know more about your research.

As an undergraduate student in your discipline, you have the advantage of being engaged in a niche area of research. As such, your research is current and will most likely be of interest to scholars in your community.

A typical research paper has the following main sections: introduction, methods, results, discussion, and conclusion. The other front and back matters of a research paper are the title, abstract, acknowledgments, and reference list. This structure is commonly adopted and accepted in the scientific fields. The research report starts with a general idea. The report then leads the reader to a discussion on a specific research area. It then ends with applicability to a bigger area. The last section, Conclusion, is the focus of this lesson.

The rhetorical moves of a Conclusion reflect its roles (see Fig. 54.1 ). It starts by reminding the reader of what is presented in the Introduction. For example, if a problem is described in the Introduction, that same problem can be revisited in the Conclusion to provide evidence that the report is helpful in creating a new understanding of the problem. The writer can also refer to the Introduction by using keywords or parallel concepts that were presented there.

Rhetorical moves of Conclusion (the University of North Carolina at Chapel Hill Writing Center,2019)

Next is a synthesis and not a summary of the outcomes of the study. Ideas should not simply be repeated as they were in the earlier parts of the report. The writer must show how the points made, and the support and examples that were given, fit together.

In terms of limitations, if it is not already mentioned in the Discussion section, the writer should acknowledge the weaknesses and shortcomings in the design and/or conduct of the study.

Finally, in connecting to the wider context, the writer should propose a course of action, a solution to an issue, or pose questions for further study. This can redirect readers’ thoughts and help them apply the information and ideas in the study to their own research context or to see the broader implications of the study.

1.4 Linguistic Features of the Conclusion Section

In terms of linguistic features, the use of tense in the Conclusion section is primarily present where the writer’s voice, position, and interpretation are prominent. This is followed by the use of the future tense in sharing what is ahead and some use of past when referring to the study that was done. As summarized by Swales and Feak (2012), Table 54.1 presents the frequency of use of the present tense and past tense in a research report.

1.5 Writing the Conclusion Section

Often, writing a Conclusion is not as easy as it first seems. Using the Question and Answer approach, below is a description of what is usually included in the Conclusion section.

How long should the Conclusion be?

One or two paragraphs comprising 1 sentence summarizing what the paper was about

Two to three sentences summarizing and synthesizing the key findings related to the thesis or objectives of the study

One sentence on limitations (if not in Discussion)

One to two sentences highlighting the significance and implications

One sentence on potential directions for further research

Should the objective be referred to in a Conclusion?

An effective Conclusion reiterates the issue or problem the hypothesis or objective(s) set out to solve. It is important to remind the readers what the hypothesis or objective(s) of the report are and to what extent they are addressed

How far should the Conclusion reflect the Introduction?

Referring to points made in the Introduction in the conclusion ties the paper together and provides readers with a sense of closure.

How much summarizing should there be in a Conclusion?

The conclusion can loosely follow the organization of your paper to parallel, but the focus should be on the paper’s analysis rather than on the organization.

Should newly found information be added to a Conclusion?

Well-written conclusions do not bring in new information or analysis; instead, they sum up what is already contained in the paper.

(Bahamani et al., 2017; Markowsky, 2010)

1.6 Task: Analysing a Conclusion Section

Consider Examples 1 to 4. How do the writers communicate the following information?

Restatement of objective(s)

Refection of outcome(s)

Acknowledgment of limitations, if any

Connection to wider context

“According to this study, the use of educational models, such as a Precaution Adoption Process Model (PAPM) that most people are associated with the process of decision-making in higher education will be beneficial. Moreover, in the preparation, development and implementation of training programs, factors like increased perceived susceptibility, and perceived benefits should be dealt with and some facilities should be provided to facilitate or resolve the barriers of doing the Pap smear test as much as possible.”

(Bahamani et al., 2016)

“Community pharmacists perceived the NMS service as being of benefit to patients by providing advice and reassurance. Implementation of NMS was variable and pharmacists’ perceptions of its feasibility and operationalisation were mixed. Some found the logistics of arranging and conducting the necessary follow-ups challenging, as were service targets. Patient awareness and understanding of NMS was reported to be low and there was a perceived need for publicity about the service. NMS appeared to have strengthened existing good relationships between pharmacists and GPs. Some pharmacists’ concerns about possible overlap of NMS with GP and nurse input may have impacted on their motivation. Overall, our findings indicate that NMS provides an opportunity for patient benefit (patient interaction and medicines management) and the development of contemporary pharmacy practice.”

(Lucas & Blenkinsopp, 2015)

“In this review, we discussed several strategies for the engineering of RiPP pathways to produce artificial pep-tides bearing non-proteinogenic structures characteristic of peptidic natural products. In the RiPP pathways, the structures of the final products are defined by the primary sequences of the precursor genes. Moreover, only a small number of modifying enzymes are involved, and the enzymes function modularly. These features have greatly facilitated both in vivo and in vitro engineering of the pathways, leading to a wide variety of artificial derivatives of naturally occurring RiPPs. In principle, the engineering strategies introduced here can be interchangeably applied for other classes of RiPP enzymes/pathways. Post-biosynthetic chemical modification of RiPPs would be an alternative approach to further increase the structural variation of the products [48–50]. Given that new classes of RiPP enzymes have been frequently reported, and that genetic information of putative RiPP enzymes continues to arise, the array of molecules feasible by RiPP engineering will be further expanded. Some of the artificial RiPP derivatives exhibited elevated bioactivities or different selectivities as compared with their wild type RiPPs. Although these precedents have demonstrated the pharmaceutical relevance of RiPP ana-logs, the next important step in RiPP engineering is the development of novel RiPP derivatives with artificial bioactivities. In more recent reports [51 __,52 __,53 __], the integration of combinatorial lanthipeptide biosynthesis with in vitro selection or bacterial reverse two-hybrid screening methods have successfully obtained artificial ligands specific to certain target proteins. Such approaches, including other strategies under investigation in laboratories in this field, for constructing and screening vast RiPP libraries would lead to the creation of artificial bioactive peptides with non-proteinogenic structures in the near feature.”

(Goto & Suga, 2018)

“Our study is the first to assess and characterise silibinin’s various roles as an adjuvant in protecting against PZA- and INH-induced hepatotoxicity. Most promisingly, we demonstrated silibinin’s safety and efficacy as a rescue adjuvant in vitro , both of which are fundamental considerations in the use of any drug. We also identified silibinin’s potential utility as a rescue hepatoprotectant, shed important mechanistic insights on its hepatoprotective effect, and identified novel antioxidant targets in ameliorating ATT-induced hepatotoxicity. The proof-of-concept demonstrated in this project forms the ethical and scientific foundation to justify and inform subsequent in vivo preclinical studies and clinical trials. Given the lack of alternative treatments in tuberculosis, the need to preserve our remaining antibiotics is paramount. The high stakes involved necessitate future efforts to support our preliminary work in making silibinin clinically relevant to patients and healthcare professionals alike.”

(Goh, 2018)

1.7 In Summary

To recap, in drafting the Conclusion section, you should keep in mind that final remarks can leave the readers with a long-lasting impression of the report especially on the key point(s) that the writer intends to convey. Therefore, you should be careful in crafting this last section of your report.

1.8 References

Bahamani, A. et al. (2017). The Effect of Training Based on Precaution Adoption Process Model (PAPM) on Rural Females’ Participation in Pap smear. BJPR, 16 , 6. Retrieved from http://www.journalrepository.org/media/journals/BJPR_14/2017/May/Bahmani1662017BJPR32965.pdf

Craswell G., & Poore, M. (2012). Writing for Academic Success, 2nd. London: Sage.

Goh, Z-H. (2018). An Evaluation of the Roles and Mechanisms of Silibinin in Reducing Pyrazinamide- and Isoniazid-Induced Hepatotoxicity . Unpublished Final Year Project. National University of Singapore: Department of Pharmacy.

Goto, Y., & Suga, H. (2018). Engineering of RiPP pathways for the production of artificial peptides bearing various non-proteinogenic structures. Current Opinion in Chemical Biology , 46 , 82–90.

Lucas, B., & Blenkinsopp, A. (2015). Community pharmacists’ experience and perceptions of the New Medicines Serves (NMS). IJPP , 23 , 6. Retrieved from http://onlinelibrary.wiley.com/doi/10.1111/ijpp.12180/full

Markowski (2010). WPPD Evaluation form for capstone paper . Retrieved from https://cop-main.sites.medinfo.ufl.edu/files/2010/12/Capstone-Paper-Checklist-and-Reviewer-Evaluation-Form.pdf

Swales, J.M., & Feak, C.B. (2012). Academic writing for graduate students , 3 rd ed. Michigan: University of Michigan Press.

University of North Carolina at Chapel Hill, The Writing Center. (2019). Conclusions . Retrieved from https://writingcenter.unc.edu/tips-and-tools/conclusions/

Appendix 2: Quiz for Conclusion Activity

Instructions

There are 6 questions in this quiz. Choose the most appropriate answer among the options provided.

What does the Conclusion section of a scientific report do?

It provides a recap of report, with reference to the objective(s).

It gives a closure to what has been discussed in relation to the topic.

It shares future direction(s) and in doing so connects to a wider context.

It propels the reader to have an enhanced understanding of the topic.

i, ii, and iii

i, ii and iv

ii, iii and iv

i, ii, iii and iv

The first rhetorical move of the Conclusion section is restatement of objective(s). It …

reminds the reader the objective(s) of the report.

restates reason(s) of each objective of the report.

revisits issue(s) presented requiring investigation.

reiterates the importance of the research project.

The second rhetorical move of the Conclusion section is reflection of outcome(s). It …

summarizes all the findings of the research project.

synthesizes outcomes of the research project.

is a repeat of important ideas mentioned in the report.

shows how key points, evidence, and support fit together.

In connecting to a wider context, the authors …

remind the reader of the importance of the topic.

propose a course of action for the reader.

pose a question to the reader for further research.

direct the reader to certain direction(s).

Following is the Conclusion section of a published article.

“In summary, we have assessed and characterised silibinin’s various roles as an adjuvant in protecting against PZA- and INH-induced hepatotoxicity. Our in vitro experiments suggest that silibinin may be safe and efficacious as a rescue adjuvant, both fundamental considerations in the use of any drug. Further optimisation of our in vitro model may also enhance silibinin’s hepatoprotective effect in rescue, prophylaxis, and recovery. Using this model, we have gleaned important mechanistic insights into its hepatoprotective effect and identified novel antioxidant targets in ameliorating HRZE-induced hepatotoxicity. Future directions will involve exploring the two main mechanisms by which silibinin may ameliorate hepatotoxicity; the proof-of-concept demonstrated in this project will inform subsequent in vitro and in vivo preclinical studies. Given the lack of alternative treatments in tuberculosis, the need to preserve our remaining antibiotics is paramount. These high stakes necessitate future efforts to support our preliminary work, making silibinin more clinically relevant to patients and healthcare professionals alike.” (Goh et al., 2020)

This excerpt of the Conclusion section…

restates objectives of the research.

synthesizes outcomes of the research.

acknowledges limitations of the research

connects the reader to a wider context.

i, ii and iii

What can one observe about the use of tenses in the Conclusion section? The frequency of use of present and future tenses …

demonstrates the importance results being synthesized.

is ungrammatical as the past tense should be used to state the outcomes.

propels the reader to think of future research.

suggests an encouraging tone to end the report.

Rights and permissions

Reprints and permissions

Copyright information

© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this chapter

Wu, S.M., Lee, K.C., Chan, E.C.Y. (2023). The Conclusion: How to End a Scientific Report in Style. In: Rowland, S., Kuchel, L. (eds) Teaching Science Students to Communicate: A Practical Guide. Springer, Cham. https://doi.org/10.1007/978-3-030-91628-2_54

Download citation

DOI : https://doi.org/10.1007/978-3-030-91628-2_54

Published : 26 April 2023

Publisher Name : Springer, Cham

Print ISBN : 978-3-030-91627-5

Online ISBN : 978-3-030-91628-2

eBook Packages : Biomedical and Life Sciences Biomedical and Life Sciences (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts
• CAREER FEATURE
• 28 February 2018
• Correction 16 March 2018

How to write a first-class paper

• Virginia Gewin 0

Virginia Gewin is a freelance writer in Portland, Oregon.

You can also search for this author in PubMed   Google Scholar

Manuscripts may have a rigidly defined structure, but there’s still room to tell a compelling story — one that clearly communicates the science and is a pleasure to read. Scientist-authors and editors debate the importance and meaning of creativity and offer tips on how to write a top paper.

Access options

Access Nature and 54 other Nature Portfolio journals

Get Nature+, our best-value online-access subscription

24,99 € / 30 days

cancel any time

Subscribe to this journal

Receive 51 print issues and online access

185,98 € per year

only 3,65 € per issue

Rent or buy this article

Prices vary by article type

Prices may be subject to local taxes which are calculated during checkout

Nature 555 , 129-130 (2018)

doi: https://doi.org/10.1038/d41586-018-02404-4

Interviews have been edited for clarity and length.

Updates & Corrections

Correction 16 March 2018 : This article should have made clear that Altmetric is part of Digital Science, a company owned by Holtzbrinck Publishing Group, which is also the majority shareholder in Nature’s publisher, Springer Nature. Nature Research Editing Services is also owned by Springer Nature.

Related Articles

I’m worried I’ve been contacted by a predatory publisher — how do I find out?

Career Feature 15 MAY 24

How I fled bombed Aleppo to continue my career in science

Career Feature 08 MAY 24

Illuminating ‘the ugly side of science’: fresh incentives for reporting negative results

Mount Etna’s spectacular smoke rings and more — April’s best science images

News 03 MAY 24

Overseas Talent, Embarking on a New Journey Together at Tianjin University

We cordially invite outstanding young individuals from overseas to apply for the Excellent Young Scientists Fund Program (Overseas).

Tianjin, China

Tianjin University (TJU)

Chair Professor Positions in the School of Pharmaceutical Science and Technology

SPST seeks top Faculty scholars in Pharmaceutical Sciences.

Chair Professor Positions in the School of Precision Instruments and Optoelectronic Engineering

We are committed to accomplishing the mission of achieving a world-top-class engineering school.

Chair Professor Positions in the School of Mechanical Engineering

Aims to cultivate top talents, train a top-ranking faculty team, construct first-class disciplines and foster a favorable academic environment.

Chair Professor Positions in the School of Materials Science and Engineering

SMSE consists of materials science-related majors and research, including metallic materials, ceramic materials, polymeric materials...

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

Studying / Writing Tools

Essay Conclusion Generator

Stuck at the end of your paper and not sure where to turn? We know it’s always good to go out on a high note and leave your reader wanting more. But what if you’re not sure how to do that? Well, don’t fret—our conclusion generator is here to help you hit that note over and over again. We take the words you’ve already used, the points you’ve already made, and the title that ties it all together to understand what you’ve been saying in your paper. Then we process all that data and turn out a perfect concluding essay for you. We’re making writing easy again!

How to Use:

This is a simple tool to use and all it requires is your title, your text, and a click of a button. First, enter the title of your paper into the appropriate box. This helps the generator get an idea of what your paper is about. Second, enter the text of your essay into the box below. The generator scans the text to find the thesis and main points. Then it uses that information to develop a concluding paragraph for you.

Conclusion Generator Results

Why use an essay conclusion generator.

Writing is an art—that’s all there is to it. Now we’re not talking about the Jackson Pollack kind of art where you get to splatter a bunch of colors across a canvas and then promote it as modern and meaningful—because to get noticed for that kind of art you have to know the right kind of people. Chances are you’re here because you don’t know the right kind of people. But, come to think of it, now that you’re here maybe you are finally meeting the right kind. Why? Because we’re the kind of people who want to help. We’re not going to tell your Pollack-like painted words are beautiful and throw money at you. No. But we will help craft that essay you’re struggling with. That’s what we do.

This conclusion generator is just one of many tools we offer, but it helps in a unique way that relates specifically to the art of making a great paper. How so? You see, every essay should have a beginning, a middle and an end—just like every great drama (as Aristotle used to say, you know). Sophocles’ Oedipus was considered the greatest example of a tragic drama by the Philosopher because, for one thing, it had a beginning, middle and end. Can you imagine what Aristotle would have thought of it if the play had cut off early, leaving the audience hanging on the edge of a cliff?

Well, he would have felt about the same way your reader feels if you write a big, beautiful essay with a beginning, middle but no end. Granted, in drama there’s a little payoff called catharsis—but in essay writing the payoff is essentially the final message: the Jerry Springer moment where he leaves you with a final thought, a parting few words to think about on your way home. That’s why writing a conclusion is so important. It is more than just rehashing your introduction and restating your thesis. It is about giving your reader that final scoop of ice cream—the one you’ve been holding back. He wasn’t even sure you had it but then, all of a sudden there it is! That’s what a great conclusion can be like.

So of course that brings the pressure, doesn’t it? You got your thesis. You got your intro. You wrote the body and gave every paragraph a main point. You finished that then the old mind went blank. Happens to the best of us. You’ve written your paper—and now what? You hit all the points you wanted to make and the last thing you want to do is go back through them all again. You’re exhausted. You’re out of gas.

What we did to design our generator was to think of what a great conclusion needs. A great conclusion should remind the reader in short summation of the main points of your essay. Your reader is about to go out the door, so you have to make sure he goes out with the right thoughts in his head. Don’t just repeat verbatim what you stated in your opening paragraph. Hit those points with a new set of words so that they seem both fresh and familiar at the same time. That way they stay embedded in the brain and the reader finds himself reflecting on them over time. Like a movie that you can’t get out of your head, an essay that concludes well can make up for all of its earlier sins and transgressions.

That’s why this generator helps. It gets you where you need to be and shows you what you need to do to wrap it up all nice and pretty with a bow on top. Think of your essay as a Christmas gift for someone you love. Are you really just going to hand it over unwrapped? That’s what you would be doing without a great conclusion. So use this generator and gift wrap that essay the way it should be. Your reader deserves it for reading all the way through after all.

Give Your Paper the Ending it Deserves

Whether you think of an essay conclusion as gift wrapping or as a wrap up, it makes no difference. The key to creating a great conclusion is to think about what your overall essay has been about and then write a set of new words inspired by that essence. The reader should feel that essence through and through. A quickly written conclusion that fails to tap into the essence will feel rushed and unsatisfactory. The reader will feel that after a great introduction and good meeting he got blown off at the end and not taken seriously. The reader wants to go out on a high not a low. So take a little extra time with your conclusion. Think of it as the last time you will see your reader, the last time you will get to say goodbye. Think of everything you’ve been through together in terms of your essay and then give the reader your final thought.

Our conclusion generator can help to find that final thought. If you’re brain is parched and thirsting for assistance, look no further because we’ve got the thirst quencher for you. This generator takes the text you’ve written, looks it over, then tells you want conclusion it should have. It digests the data and distils its essence and presents it for the reader like a new pearl on burnished silver. That’s what every great writer tries to do with his conclusion. Every essay needs one and every reader deserves one. Otherwise you’re basically sending him out into the cold without a final drink to keep him warm on the ride home, without a final thought to give him something to think about as he goes to sleep, without a final summation of all the things that matter.

Join thousands of other students and "spark your studies."

Register now for FREE and get Unlimited Access to all Studying & Writing Tools.

You’ve reached your preview limit this month

Already a Study Spark member? Log In

or Contact customer support in case of any questions.

Study Guides

Writing Guides

Customer Service

Your customer service team resolved my issue in minutes!

Study Spark - providing your mind the spark it needs to help improve your grades.

©2020 Study Spark LLC.

Studyspark.com uses cookies to offer our users the best experience. By continuing, you are agreeing to receive cookies. Privacy Policy

Scientific Reports

What this handout is about.

This handout provides a general guide to writing reports about scientific research you’ve performed. In addition to describing the conventional rules about the format and content of a lab report, we’ll also attempt to convey why these rules exist, so you’ll get a clearer, more dependable idea of how to approach this writing situation. Readers of this handout may also find our handout on writing in the sciences useful.

Background and pre-writing

Why do we write research reports.

You did an experiment or study for your science class, and now you have to write it up for your teacher to review. You feel that you understood the background sufficiently, designed and completed the study effectively, obtained useful data, and can use those data to draw conclusions about a scientific process or principle. But how exactly do you write all that? What is your teacher expecting to see?

To take some of the guesswork out of answering these questions, try to think beyond the classroom setting. In fact, you and your teacher are both part of a scientific community, and the people who participate in this community tend to share the same values. As long as you understand and respect these values, your writing will likely meet the expectations of your audience—including your teacher.

So why are you writing this research report? The practical answer is “Because the teacher assigned it,” but that’s classroom thinking. Generally speaking, people investigating some scientific hypothesis have a responsibility to the rest of the scientific world to report their findings, particularly if these findings add to or contradict previous ideas. The people reading such reports have two primary goals:

• They want to gather the information presented.
• They want to know that the findings are legitimate.

Your job as a writer, then, is to fulfill these two goals.

How do I do that?

Good question. Here is the basic format scientists have designed for research reports:

• Introduction

Methods and Materials

This format, sometimes called “IMRAD,” may take slightly different shapes depending on the discipline or audience; some ask you to include an abstract or separate section for the hypothesis, or call the Discussion section “Conclusions,” or change the order of the sections (some professional and academic journals require the Methods section to appear last). Overall, however, the IMRAD format was devised to represent a textual version of the scientific method.

The scientific method, you’ll probably recall, involves developing a hypothesis, testing it, and deciding whether your findings support the hypothesis. In essence, the format for a research report in the sciences mirrors the scientific method but fleshes out the process a little. Below, you’ll find a table that shows how each written section fits into the scientific method and what additional information it offers the reader.

Thinking of your research report as based on the scientific method, but elaborated in the ways described above, may help you to meet your audience’s expectations successfully. We’re going to proceed by explicitly connecting each section of the lab report to the scientific method, then explaining why and how you need to elaborate that section.

Although this handout takes each section in the order in which it should be presented in the final report, you may for practical reasons decide to compose sections in another order. For example, many writers find that composing their Methods and Results before the other sections helps to clarify their idea of the experiment or study as a whole. You might consider using each assignment to practice different approaches to drafting the report, to find the order that works best for you.

What should I do before drafting the lab report?

The best way to prepare to write the lab report is to make sure that you fully understand everything you need to about the experiment. Obviously, if you don’t quite know what went on during the lab, you’re going to find it difficult to explain the lab satisfactorily to someone else. To make sure you know enough to write the report, complete the following steps:

• What are we going to do in this lab? (That is, what’s the procedure?)
• Why are we going to do it that way?
• What are we hoping to learn from this experiment?
• Why would we benefit from this knowledge?
• Consult your lab supervisor as you perform the lab. If you don’t know how to answer one of the questions above, for example, your lab supervisor will probably be able to explain it to you (or, at least, help you figure it out).
• Plan the steps of the experiment carefully with your lab partners. The less you rush, the more likely it is that you’ll perform the experiment correctly and record your findings accurately. Also, take some time to think about the best way to organize the data before you have to start putting numbers down. If you can design a table to account for the data, that will tend to work much better than jotting results down hurriedly on a scrap piece of paper.
• Record the data carefully so you get them right. You won’t be able to trust your conclusions if you have the wrong data, and your readers will know you messed up if the other three people in your group have “97 degrees” and you have “87.”
• Consult with your lab partners about everything you do. Lab groups often make one of two mistakes: two people do all the work while two have a nice chat, or everybody works together until the group finishes gathering the raw data, then scrams outta there. Collaborate with your partners, even when the experiment is “over.” What trends did you observe? Was the hypothesis supported? Did you all get the same results? What kind of figure should you use to represent your findings? The whole group can work together to answer these questions.
• Consider your audience. You may believe that audience is a non-issue: it’s your lab TA, right? Well, yes—but again, think beyond the classroom. If you write with only your lab instructor in mind, you may omit material that is crucial to a complete understanding of your experiment, because you assume the instructor knows all that stuff already. As a result, you may receive a lower grade, since your TA won’t be sure that you understand all the principles at work. Try to write towards a student in the same course but a different lab section. That student will have a fair degree of scientific expertise but won’t know much about your experiment particularly. Alternatively, you could envision yourself five years from now, after the reading and lectures for this course have faded a bit. What would you remember, and what would you need explained more clearly (as a refresher)?

Once you’ve completed these steps as you perform the experiment, you’ll be in a good position to draft an effective lab report.

Introductions

How do i write a strong introduction.

For the purposes of this handout, we’ll consider the Introduction to contain four basic elements: the purpose, the scientific literature relevant to the subject, the hypothesis, and the reasons you believed your hypothesis viable. Let’s start by going through each element of the Introduction to clarify what it covers and why it’s important. Then we can formulate a logical organizational strategy for the section.

The inclusion of the purpose (sometimes called the objective) of the experiment often confuses writers. The biggest misconception is that the purpose is the same as the hypothesis. Not quite. We’ll get to hypotheses in a minute, but basically they provide some indication of what you expect the experiment to show. The purpose is broader, and deals more with what you expect to gain through the experiment. In a professional setting, the hypothesis might have something to do with how cells react to a certain kind of genetic manipulation, but the purpose of the experiment is to learn more about potential cancer treatments. Undergraduate reports don’t often have this wide-ranging a goal, but you should still try to maintain the distinction between your hypothesis and your purpose. In a solubility experiment, for example, your hypothesis might talk about the relationship between temperature and the rate of solubility, but the purpose is probably to learn more about some specific scientific principle underlying the process of solubility.

For starters, most people say that you should write out your working hypothesis before you perform the experiment or study. Many beginning science students neglect to do so and find themselves struggling to remember precisely which variables were involved in the process or in what way the researchers felt that they were related. Write your hypothesis down as you develop it—you’ll be glad you did.

As for the form a hypothesis should take, it’s best not to be too fancy or complicated; an inventive style isn’t nearly so important as clarity here. There’s nothing wrong with beginning your hypothesis with the phrase, “It was hypothesized that . . .” Be as specific as you can about the relationship between the different objects of your study. In other words, explain that when term A changes, term B changes in this particular way. Readers of scientific writing are rarely content with the idea that a relationship between two terms exists—they want to know what that relationship entails.

Not a hypothesis:

“It was hypothesized that there is a significant relationship between the temperature of a solvent and the rate at which a solute dissolves.”

Hypothesis:

“It was hypothesized that as the temperature of a solvent increases, the rate at which a solute will dissolve in that solvent increases.”

Put more technically, most hypotheses contain both an independent and a dependent variable. The independent variable is what you manipulate to test the reaction; the dependent variable is what changes as a result of your manipulation. In the example above, the independent variable is the temperature of the solvent, and the dependent variable is the rate of solubility. Be sure that your hypothesis includes both variables.

Justify your hypothesis

You need to do more than tell your readers what your hypothesis is; you also need to assure them that this hypothesis was reasonable, given the circumstances. In other words, use the Introduction to explain that you didn’t just pluck your hypothesis out of thin air. (If you did pluck it out of thin air, your problems with your report will probably extend beyond using the appropriate format.) If you posit that a particular relationship exists between the independent and the dependent variable, what led you to believe your “guess” might be supported by evidence?

Scientists often refer to this type of justification as “motivating” the hypothesis, in the sense that something propelled them to make that prediction. Often, motivation includes what we already know—or rather, what scientists generally accept as true (see “Background/previous research” below). But you can also motivate your hypothesis by relying on logic or on your own observations. If you’re trying to decide which solutes will dissolve more rapidly in a solvent at increased temperatures, you might remember that some solids are meant to dissolve in hot water (e.g., bouillon cubes) and some are used for a function precisely because they withstand higher temperatures (they make saucepans out of something). Or you can think about whether you’ve noticed sugar dissolving more rapidly in your glass of iced tea or in your cup of coffee. Even such basic, outside-the-lab observations can help you justify your hypothesis as reasonable.

Background/previous research

This part of the Introduction demonstrates to the reader your awareness of how you’re building on other scientists’ work. If you think of the scientific community as engaging in a series of conversations about various topics, then you’ll recognize that the relevant background material will alert the reader to which conversation you want to enter.

Generally speaking, authors writing journal articles use the background for slightly different purposes than do students completing assignments. Because readers of academic journals tend to be professionals in the field, authors explain the background in order to permit readers to evaluate the study’s pertinence for their own work. You, on the other hand, write toward a much narrower audience—your peers in the course or your lab instructor—and so you must demonstrate that you understand the context for the (presumably assigned) experiment or study you’ve completed. For example, if your professor has been talking about polarity during lectures, and you’re doing a solubility experiment, you might try to connect the polarity of a solid to its relative solubility in certain solvents. In any event, both professional researchers and undergraduates need to connect the background material overtly to their own work.

Organization of this section

Most of the time, writers begin by stating the purpose or objectives of their own work, which establishes for the reader’s benefit the “nature and scope of the problem investigated” (Day 1994). Once you have expressed your purpose, you should then find it easier to move from the general purpose, to relevant material on the subject, to your hypothesis. In abbreviated form, an Introduction section might look like this:

“The purpose of the experiment was to test conventional ideas about solubility in the laboratory [purpose] . . . According to Whitecoat and Labrat (1999), at higher temperatures the molecules of solvents move more quickly . . . We know from the class lecture that molecules moving at higher rates of speed collide with one another more often and thus break down more easily [background material/motivation] . . . Thus, it was hypothesized that as the temperature of a solvent increases, the rate at which a solute will dissolve in that solvent increases [hypothesis].”

Again—these are guidelines, not commandments. Some writers and readers prefer different structures for the Introduction. The one above merely illustrates a common approach to organizing material.

How do I write a strong Materials and Methods section?

As with any piece of writing, your Methods section will succeed only if it fulfills its readers’ expectations, so you need to be clear in your own mind about the purpose of this section. Let’s review the purpose as we described it above: in this section, you want to describe in detail how you tested the hypothesis you developed and also to clarify the rationale for your procedure. In science, it’s not sufficient merely to design and carry out an experiment. Ultimately, others must be able to verify your findings, so your experiment must be reproducible, to the extent that other researchers can follow the same procedure and obtain the same (or similar) results.

Here’s a real-world example of the importance of reproducibility. In 1989, physicists Stanley Pons and Martin Fleischman announced that they had discovered “cold fusion,” a way of producing excess heat and power without the nuclear radiation that accompanies “hot fusion.” Such a discovery could have great ramifications for the industrial production of energy, so these findings created a great deal of interest. When other scientists tried to duplicate the experiment, however, they didn’t achieve the same results, and as a result many wrote off the conclusions as unjustified (or worse, a hoax). To this day, the viability of cold fusion is debated within the scientific community, even though an increasing number of researchers believe it possible. So when you write your Methods section, keep in mind that you need to describe your experiment well enough to allow others to replicate it exactly.

With these goals in mind, let’s consider how to write an effective Methods section in terms of content, structure, and style.

Sometimes the hardest thing about writing this section isn’t what you should talk about, but what you shouldn’t talk about. Writers often want to include the results of their experiment, because they measured and recorded the results during the course of the experiment. But such data should be reserved for the Results section. In the Methods section, you can write that you recorded the results, or how you recorded the results (e.g., in a table), but you shouldn’t write what the results were—not yet. Here, you’re merely stating exactly how you went about testing your hypothesis. As you draft your Methods section, ask yourself the following questions:

• How much detail? Be precise in providing details, but stay relevant. Ask yourself, “Would it make any difference if this piece were a different size or made from a different material?” If not, you probably don’t need to get too specific. If so, you should give as many details as necessary to prevent this experiment from going awry if someone else tries to carry it out. Probably the most crucial detail is measurement; you should always quantify anything you can, such as time elapsed, temperature, mass, volume, etc.
• Rationale: Be sure that as you’re relating your actions during the experiment, you explain your rationale for the protocol you developed. If you capped a test tube immediately after adding a solute to a solvent, why did you do that? (That’s really two questions: why did you cap it, and why did you cap it immediately?) In a professional setting, writers provide their rationale as a way to explain their thinking to potential critics. On one hand, of course, that’s your motivation for talking about protocol, too. On the other hand, since in practical terms you’re also writing to your teacher (who’s seeking to evaluate how well you comprehend the principles of the experiment), explaining the rationale indicates that you understand the reasons for conducting the experiment in that way, and that you’re not just following orders. Critical thinking is crucial—robots don’t make good scientists.
• Control: Most experiments will include a control, which is a means of comparing experimental results. (Sometimes you’ll need to have more than one control, depending on the number of hypotheses you want to test.) The control is exactly the same as the other items you’re testing, except that you don’t manipulate the independent variable-the condition you’re altering to check the effect on the dependent variable. For example, if you’re testing solubility rates at increased temperatures, your control would be a solution that you didn’t heat at all; that way, you’ll see how quickly the solute dissolves “naturally” (i.e., without manipulation), and you’ll have a point of reference against which to compare the solutions you did heat.

Describe the control in the Methods section. Two things are especially important in writing about the control: identify the control as a control, and explain what you’re controlling for. Here is an example:

“As a control for the temperature change, we placed the same amount of solute in the same amount of solvent, and let the solution stand for five minutes without heating it.”

Structure and style

Organization is especially important in the Methods section of a lab report because readers must understand your experimental procedure completely. Many writers are surprised by the difficulty of conveying what they did during the experiment, since after all they’re only reporting an event, but it’s often tricky to present this information in a coherent way. There’s a fairly standard structure you can use to guide you, and following the conventions for style can help clarify your points.

• Subsections: Occasionally, researchers use subsections to report their procedure when the following circumstances apply: 1) if they’ve used a great many materials; 2) if the procedure is unusually complicated; 3) if they’ve developed a procedure that won’t be familiar to many of their readers. Because these conditions rarely apply to the experiments you’ll perform in class, most undergraduate lab reports won’t require you to use subsections. In fact, many guides to writing lab reports suggest that you try to limit your Methods section to a single paragraph.
• Narrative structure: Think of this section as telling a story about a group of people and the experiment they performed. Describe what you did in the order in which you did it. You may have heard the old joke centered on the line, “Disconnect the red wire, but only after disconnecting the green wire,” where the person reading the directions blows everything to kingdom come because the directions weren’t in order. We’re used to reading about events chronologically, and so your readers will generally understand what you did if you present that information in the same way. Also, since the Methods section does generally appear as a narrative (story), you want to avoid the “recipe” approach: “First, take a clean, dry 100 ml test tube from the rack. Next, add 50 ml of distilled water.” You should be reporting what did happen, not telling the reader how to perform the experiment: “50 ml of distilled water was poured into a clean, dry 100 ml test tube.” Hint: most of the time, the recipe approach comes from copying down the steps of the procedure from your lab manual, so you may want to draft the Methods section initially without consulting your manual. Later, of course, you can go back and fill in any part of the procedure you inadvertently overlooked.
• Past tense: Remember that you’re describing what happened, so you should use past tense to refer to everything you did during the experiment. Writers are often tempted to use the imperative (“Add 5 g of the solid to the solution”) because that’s how their lab manuals are worded; less frequently, they use present tense (“5 g of the solid are added to the solution”). Instead, remember that you’re talking about an event which happened at a particular time in the past, and which has already ended by the time you start writing, so simple past tense will be appropriate in this section (“5 g of the solid were added to the solution” or “We added 5 g of the solid to the solution”).
• Active: We heated the solution to 80°C. (The subject, “we,” performs the action, heating.)
• Passive: The solution was heated to 80°C. (The subject, “solution,” doesn’t do the heating–it is acted upon, not acting.)

Increasingly, especially in the social sciences, using first person and active voice is acceptable in scientific reports. Most readers find that this style of writing conveys information more clearly and concisely. This rhetorical choice thus brings two scientific values into conflict: objectivity versus clarity. Since the scientific community hasn’t reached a consensus about which style it prefers, you may want to ask your lab instructor.

How do I write a strong Results section?

Here’s a paradox for you. The Results section is often both the shortest (yay!) and most important (uh-oh!) part of your report. Your Materials and Methods section shows how you obtained the results, and your Discussion section explores the significance of the results, so clearly the Results section forms the backbone of the lab report. This section provides the most critical information about your experiment: the data that allow you to discuss how your hypothesis was or wasn’t supported. But it doesn’t provide anything else, which explains why this section is generally shorter than the others.

Before you write this section, look at all the data you collected to figure out what relates significantly to your hypothesis. You’ll want to highlight this material in your Results section. Resist the urge to include every bit of data you collected, since perhaps not all are relevant. Also, don’t try to draw conclusions about the results—save them for the Discussion section. In this section, you’re reporting facts. Nothing your readers can dispute should appear in the Results section.

Most Results sections feature three distinct parts: text, tables, and figures. Let’s consider each part one at a time.

This should be a short paragraph, generally just a few lines, that describes the results you obtained from your experiment. In a relatively simple experiment, one that doesn’t produce a lot of data for you to repeat, the text can represent the entire Results section. Don’t feel that you need to include lots of extraneous detail to compensate for a short (but effective) text; your readers appreciate discrimination more than your ability to recite facts. In a more complex experiment, you may want to use tables and/or figures to help guide your readers toward the most important information you gathered. In that event, you’ll need to refer to each table or figure directly, where appropriate:

“Table 1 lists the rates of solubility for each substance”

“Solubility increased as the temperature of the solution increased (see Figure 1).”

If you do use tables or figures, make sure that you don’t present the same material in both the text and the tables/figures, since in essence you’ll just repeat yourself, probably annoying your readers with the redundancy of your statements.

Feel free to describe trends that emerge as you examine the data. Although identifying trends requires some judgment on your part and so may not feel like factual reporting, no one can deny that these trends do exist, and so they properly belong in the Results section. Example:

“Heating the solution increased the rate of solubility of polar solids by 45% but had no effect on the rate of solubility in solutions containing non-polar solids.”

This point isn’t debatable—you’re just pointing out what the data show.

As in the Materials and Methods section, you want to refer to your data in the past tense, because the events you recorded have already occurred and have finished occurring. In the example above, note the use of “increased” and “had,” rather than “increases” and “has.” (You don’t know from your experiment that heating always increases the solubility of polar solids, but it did that time.)

You shouldn’t put information in the table that also appears in the text. You also shouldn’t use a table to present irrelevant data, just to show you did collect these data during the experiment. Tables are good for some purposes and situations, but not others, so whether and how you’ll use tables depends upon what you need them to accomplish.

Tables are useful ways to show variation in data, but not to present a great deal of unchanging measurements. If you’re dealing with a scientific phenomenon that occurs only within a certain range of temperatures, for example, you don’t need to use a table to show that the phenomenon didn’t occur at any of the other temperatures. How useful is this table?

As you can probably see, no solubility was observed until the trial temperature reached 50°C, a fact that the text part of the Results section could easily convey. The table could then be limited to what happened at 50°C and higher, thus better illustrating the differences in solubility rates when solubility did occur.

As a rule, try not to use a table to describe any experimental event you can cover in one sentence of text. Here’s an example of an unnecessary table from How to Write and Publish a Scientific Paper , by Robert A. Day:

As Day notes, all the information in this table can be summarized in one sentence: “S. griseus, S. coelicolor, S. everycolor, and S. rainbowenski grew under aerobic conditions, whereas S. nocolor and S. greenicus required anaerobic conditions.” Most readers won’t find the table clearer than that one sentence.

When you do have reason to tabulate material, pay attention to the clarity and readability of the format you use. Here are a few tips:

• Number your table. Then, when you refer to the table in the text, use that number to tell your readers which table they can review to clarify the material.
• Give your table a title. This title should be descriptive enough to communicate the contents of the table, but not so long that it becomes difficult to follow. The titles in the sample tables above are acceptable.
• Arrange your table so that readers read vertically, not horizontally. For the most part, this rule means that you should construct your table so that like elements read down, not across. Think about what you want your readers to compare, and put that information in the column (up and down) rather than in the row (across). Usually, the point of comparison will be the numerical data you collect, so especially make sure you have columns of numbers, not rows.Here’s an example of how drastically this decision affects the readability of your table (from A Short Guide to Writing about Chemistry , by Herbert Beall and John Trimbur). Look at this table, which presents the relevant data in horizontal rows:

It’s a little tough to see the trends that the author presumably wants to present in this table. Compare this table, in which the data appear vertically:

The second table shows how putting like elements in a vertical column makes for easier reading. In this case, the like elements are the measurements of length and height, over five trials–not, as in the first table, the length and height measurements for each trial.

• Make sure to include units of measurement in the tables. Readers might be able to guess that you measured something in millimeters, but don’t make them try.
• Don’t use vertical lines as part of the format for your table. This convention exists because journals prefer not to have to reproduce these lines because the tables then become more expensive to print. Even though it’s fairly unlikely that you’ll be sending your Biology 11 lab report to Science for publication, your readers still have this expectation. Consequently, if you use the table-drawing option in your word-processing software, choose the option that doesn’t rely on a “grid” format (which includes vertical lines).

How do I include figures in my report?

Although tables can be useful ways of showing trends in the results you obtained, figures (i.e., illustrations) can do an even better job of emphasizing such trends. Lab report writers often use graphic representations of the data they collected to provide their readers with a literal picture of how the experiment went.

When should you use a figure?

Remember the circumstances under which you don’t need a table: when you don’t have a great deal of data or when the data you have don’t vary a lot. Under the same conditions, you would probably forgo the figure as well, since the figure would be unlikely to provide your readers with an additional perspective. Scientists really don’t like their time wasted, so they tend not to respond favorably to redundancy.

If you’re trying to decide between using a table and creating a figure to present your material, consider the following a rule of thumb. The strength of a table lies in its ability to supply large amounts of exact data, whereas the strength of a figure is its dramatic illustration of important trends within the experiment. If you feel that your readers won’t get the full impact of the results you obtained just by looking at the numbers, then a figure might be appropriate.

Of course, an undergraduate class may expect you to create a figure for your lab experiment, if only to make sure that you can do so effectively. If this is the case, then don’t worry about whether to use figures or not—concentrate instead on how best to accomplish your task.

Figures can include maps, photographs, pen-and-ink drawings, flow charts, bar graphs, and section graphs (“pie charts”). But the most common figure by far, especially for undergraduates, is the line graph, so we’ll focus on that type in this handout.

At the undergraduate level, you can often draw and label your graphs by hand, provided that the result is clear, legible, and drawn to scale. Computer technology has, however, made creating line graphs a lot easier. Most word-processing software has a number of functions for transferring data into graph form; many scientists have found Microsoft Excel, for example, a helpful tool in graphing results. If you plan on pursuing a career in the sciences, it may be well worth your while to learn to use a similar program.

Computers can’t, however, decide for you how your graph really works; you have to know how to design your graph to meet your readers’ expectations. Here are some of these expectations:

• Keep it as simple as possible. You may be tempted to signal the complexity of the information you gathered by trying to design a graph that accounts for that complexity. But remember the purpose of your graph: to dramatize your results in a manner that’s easy to see and grasp. Try not to make the reader stare at the graph for a half hour to find the important line among the mass of other lines. For maximum effectiveness, limit yourself to three to five lines per graph; if you have more data to demonstrate, use a set of graphs to account for it, rather than trying to cram it all into a single figure.
• Plot the independent variable on the horizontal (x) axis and the dependent variable on the vertical (y) axis. Remember that the independent variable is the condition that you manipulated during the experiment and the dependent variable is the condition that you measured to see if it changed along with the independent variable. Placing the variables along their respective axes is mostly just a convention, but since your readers are accustomed to viewing graphs in this way, you’re better off not challenging the convention in your report.
• Label each axis carefully, and be especially careful to include units of measure. You need to make sure that your readers understand perfectly well what your graph indicates.
• Number and title your graphs. As with tables, the title of the graph should be informative but concise, and you should refer to your graph by number in the text (e.g., “Figure 1 shows the increase in the solubility rate as a function of temperature”).
• Many editors of professional scientific journals prefer that writers distinguish the lines in their graphs by attaching a symbol to them, usually a geometric shape (triangle, square, etc.), and using that symbol throughout the curve of the line. Generally, readers have a hard time distinguishing dotted lines from dot-dash lines from straight lines, so you should consider staying away from this system. Editors don’t usually like different-colored lines within a graph because colors are difficult and expensive to reproduce; colors may, however, be great for your purposes, as long as you’re not planning to submit your paper to Nature. Use your discretion—try to employ whichever technique dramatizes the results most effectively.
• Try to gather data at regular intervals, so the plot points on your graph aren’t too far apart. You can’t be sure of the arc you should draw between the plot points if the points are located at the far corners of the graph; over a fifteen-minute interval, perhaps the change occurred in the first or last thirty seconds of that period (in which case your straight-line connection between the points is misleading).
• If you’re worried that you didn’t collect data at sufficiently regular intervals during your experiment, go ahead and connect the points with a straight line, but you may want to examine this problem as part of your Discussion section.
• Make your graph large enough so that everything is legible and clearly demarcated, but not so large that it either overwhelms the rest of the Results section or provides a far greater range than you need to illustrate your point. If, for example, the seedlings of your plant grew only 15 mm during the trial, you don’t need to construct a graph that accounts for 100 mm of growth. The lines in your graph should more or less fill the space created by the axes; if you see that your data is confined to the lower left portion of the graph, you should probably re-adjust your scale.
• If you create a set of graphs, make them the same size and format, including all the verbal and visual codes (captions, symbols, scale, etc.). You want to be as consistent as possible in your illustrations, so that your readers can easily make the comparisons you’re trying to get them to see.

How do I write a strong Discussion section?

The discussion section is probably the least formalized part of the report, in that you can’t really apply the same structure to every type of experiment. In simple terms, here you tell your readers what to make of the Results you obtained. If you have done the Results part well, your readers should already recognize the trends in the data and have a fairly clear idea of whether your hypothesis was supported. Because the Results can seem so self-explanatory, many students find it difficult to know what material to add in this last section.

Basically, the Discussion contains several parts, in no particular order, but roughly moving from specific (i.e., related to your experiment only) to general (how your findings fit in the larger scientific community). In this section, you will, as a rule, need to:

Explain whether the data support your hypothesis

• Acknowledge any anomalous data or deviations from what you expected

Derive conclusions, based on your findings, about the process you’re studying

• Relate your findings to earlier work in the same area (if you can)

Explore the theoretical and/or practical implications of your findings

Let’s look at some dos and don’ts for each of these objectives.

This statement is usually a good way to begin the Discussion, since you can’t effectively speak about the larger scientific value of your study until you’ve figured out the particulars of this experiment. You might begin this part of the Discussion by explicitly stating the relationships or correlations your data indicate between the independent and dependent variables. Then you can show more clearly why you believe your hypothesis was or was not supported. For example, if you tested solubility at various temperatures, you could start this section by noting that the rates of solubility increased as the temperature increased. If your initial hypothesis surmised that temperature change would not affect solubility, you would then say something like,

“The hypothesis that temperature change would not affect solubility was not supported by the data.”

Note: Students tend to view labs as practical tests of undeniable scientific truths. As a result, you may want to say that the hypothesis was “proved” or “disproved” or that it was “correct” or “incorrect.” These terms, however, reflect a degree of certainty that you as a scientist aren’t supposed to have. Remember, you’re testing a theory with a procedure that lasts only a few hours and relies on only a few trials, which severely compromises your ability to be sure about the “truth” you see. Words like “supported,” “indicated,” and “suggested” are more acceptable ways to evaluate your hypothesis.

Also, recognize that saying whether the data supported your hypothesis or not involves making a claim to be defended. As such, you need to show the readers that this claim is warranted by the evidence. Make sure that you’re very explicit about the relationship between the evidence and the conclusions you draw from it. This process is difficult for many writers because we don’t often justify conclusions in our regular lives. For example, you might nudge your friend at a party and whisper, “That guy’s drunk,” and once your friend lays eyes on the person in question, she might readily agree. In a scientific paper, by contrast, you would need to defend your claim more thoroughly by pointing to data such as slurred words, unsteady gait, and the lampshade-as-hat. In addition to pointing out these details, you would also need to show how (according to previous studies) these signs are consistent with inebriation, especially if they occur in conjunction with one another. To put it another way, tell your readers exactly how you got from point A (was the hypothesis supported?) to point B (yes/no).

Acknowledge any anomalous data, or deviations from what you expected

You need to take these exceptions and divergences into account, so that you qualify your conclusions sufficiently. For obvious reasons, your readers will doubt your authority if you (deliberately or inadvertently) overlook a key piece of data that doesn’t square with your perspective on what occurred. In a more philosophical sense, once you’ve ignored evidence that contradicts your claims, you’ve departed from the scientific method. The urge to “tidy up” the experiment is often strong, but if you give in to it you’re no longer performing good science.

Sometimes after you’ve performed a study or experiment, you realize that some part of the methods you used to test your hypothesis was flawed. In that case, it’s OK to suggest that if you had the chance to conduct your test again, you might change the design in this or that specific way in order to avoid such and such a problem. The key to making this approach work, though, is to be very precise about the weakness in your experiment, why and how you think that weakness might have affected your data, and how you would alter your protocol to eliminate—or limit the effects of—that weakness. Often, inexperienced researchers and writers feel the need to account for “wrong” data (remember, there’s no such animal), and so they speculate wildly about what might have screwed things up. These speculations include such factors as the unusually hot temperature in the room, or the possibility that their lab partners read the meters wrong, or the potentially defective equipment. These explanations are what scientists call “cop-outs,” or “lame”; don’t indicate that the experiment had a weakness unless you’re fairly certain that a) it really occurred and b) you can explain reasonably well how that weakness affected your results.

If, for example, your hypothesis dealt with the changes in solubility at different temperatures, then try to figure out what you can rationally say about the process of solubility more generally. If you’re doing an undergraduate lab, chances are that the lab will connect in some way to the material you’ve been covering either in lecture or in your reading, so you might choose to return to these resources as a way to help you think clearly about the process as a whole.

This part of the Discussion section is another place where you need to make sure that you’re not overreaching. Again, nothing you’ve found in one study would remotely allow you to claim that you now “know” something, or that something isn’t “true,” or that your experiment “confirmed” some principle or other. Hesitate before you go out on a limb—it’s dangerous! Use less absolutely conclusive language, including such words as “suggest,” “indicate,” “correspond,” “possibly,” “challenge,” etc.

Relate your findings to previous work in the field (if possible)

We’ve been talking about how to show that you belong in a particular community (such as biologists or anthropologists) by writing within conventions that they recognize and accept. Another is to try to identify a conversation going on among members of that community, and use your work to contribute to that conversation. In a larger philosophical sense, scientists can’t fully understand the value of their research unless they have some sense of the context that provoked and nourished it. That is, you have to recognize what’s new about your project (potentially, anyway) and how it benefits the wider body of scientific knowledge. On a more pragmatic level, especially for undergraduates, connecting your lab work to previous research will demonstrate to the TA that you see the big picture. You have an opportunity, in the Discussion section, to distinguish yourself from the students in your class who aren’t thinking beyond the barest facts of the study. Capitalize on this opportunity by putting your own work in context.

If you’re just beginning to work in the natural sciences (as a first-year biology or chemistry student, say), most likely the work you’ll be doing has already been performed and re-performed to a satisfactory degree. Hence, you could probably point to a similar experiment or study and compare/contrast your results and conclusions. More advanced work may deal with an issue that is somewhat less “resolved,” and so previous research may take the form of an ongoing debate, and you can use your own work to weigh in on that debate. If, for example, researchers are hotly disputing the value of herbal remedies for the common cold, and the results of your study suggest that Echinacea diminishes the symptoms but not the actual presence of the cold, then you might want to take some time in the Discussion section to recapitulate the specifics of the dispute as it relates to Echinacea as an herbal remedy. (Consider that you have probably already written in the Introduction about this debate as background research.)

This information is often the best way to end your Discussion (and, for all intents and purposes, the report). In argumentative writing generally, you want to use your closing words to convey the main point of your writing. This main point can be primarily theoretical (“Now that you understand this information, you’re in a better position to understand this larger issue”) or primarily practical (“You can use this information to take such and such an action”). In either case, the concluding statements help the reader to comprehend the significance of your project and your decision to write about it.

Since a lab report is argumentative—after all, you’re investigating a claim, and judging the legitimacy of that claim by generating and collecting evidence—it’s often a good idea to end your report with the same technique for establishing your main point. If you want to go the theoretical route, you might talk about the consequences your study has for the field or phenomenon you’re investigating. To return to the examples regarding solubility, you could end by reflecting on what your work on solubility as a function of temperature tells us (potentially) about solubility in general. (Some folks consider this type of exploration “pure” as opposed to “applied” science, although these labels can be problematic.) If you want to go the practical route, you could end by speculating about the medical, institutional, or commercial implications of your findings—in other words, answer the question, “What can this study help people to do?” In either case, you’re going to make your readers’ experience more satisfying, by helping them see why they spent their time learning what you had to teach them.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

American Psychological Association. 2010. Publication Manual of the American Psychological Association . 6th ed. Washington, DC: American Psychological Association.

Beall, Herbert, and John Trimbur. 2001. A Short Guide to Writing About Chemistry , 2nd ed. New York: Longman.

Blum, Deborah, and Mary Knudson. 1997. A Field Guide for Science Writers: The Official Guide of the National Association of Science Writers . New York: Oxford University Press.

Booth, Wayne C., Gregory G. Colomb, Joseph M. Williams, Joseph Bizup, and William T. FitzGerald. 2016. The Craft of Research , 4th ed. Chicago: University of Chicago Press.

Briscoe, Mary Helen. 1996. Preparing Scientific Illustrations: A Guide to Better Posters, Presentations, and Publications , 2nd ed. New York: Springer-Verlag.

Council of Science Editors. 2014. Scientific Style and Format: The CSE Manual for Authors, Editors, and Publishers , 8th ed. Chicago & London: University of Chicago Press.

Davis, Martha. 2012. Scientific Papers and Presentations , 3rd ed. London: Academic Press.

Day, Robert A. 1994. How to Write and Publish a Scientific Paper , 4th ed. Phoenix: Oryx Press.

Porush, David. 1995. A Short Guide to Writing About Science . New York: Longman.

Williams, Joseph, and Joseph Bizup. 2017. Style: Lessons in Clarity and Grace , 12th ed. Boston: Pearson.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• Environment
• Information Science
• Social Issues
• Argumentative
• Cause and Effect
• Classification
• Compare and Contrast
• Descriptive
• Exemplification
• Informative
• Controversial
• Exploratory
• What Is an Essay
• Length of an Essay
• Generate Ideas
• Types of Essays
• Structuring an Essay
• Outline For Essay
• Essay Introduction
• Thesis Statement
• Body of an Essay
• Writing a Conclusion
• Essay Writing Tips
• Drafting an Essay
• Revision Process
• Fix a Broken Essay
• Format of an Essay
• Essay Examples
• Essay Checklist
• Essay Writing Service
• Pay for Research Paper
• Write My Research Paper
• Write My Essay
• Custom Essay Writing Service
• Admission Essay Writing Service
• Pay for Essay
• Academic Ghostwriting
• Write My Book Report
• Case Study Writing Service
• Dissertation Writing Service
• Coursework Writing Service
• Lab Report Writing Service
• Do My Assignment
• Buy College Papers
• Capstone Project Writing Service
• Buy Research Paper
• Custom Essays for Sale

Can’t find a perfect paper?

• Conclusion Generator

Free Conclusion Generator to Finish Your Essay

Writing conclusion gives you trouble?

Let our writing experts finish this work for you

Anyone who ever wrote essays knows how annoying summing them up is. You’ve done all the work already, and you have no patience for the last part — it seems like a waste of time. Conclusion generator could become your most loyal assistant here. WritingUniverse made it easily accessible, prompt, and efficient. This tool could generate a closing section for your paper before you blink, and it’s going to be logical and on point with what you wrote. Sounds too good to be true? Learn the magic behind the machine and everything will become clear!

Common Reasons for Using Conclusion Paragraph Generator

Being a  trusted essay writing service  is a great honor, so we do our best to meet students’ needs in all possible ways. Creating an efficient conclusion generator is one of the first things we did, and here’s why. Every student has to write essays. For many, this is a boring and time-consuming job, but even those who enjoy doing it face a problem. By the end, the enthusiasm and interest fade. You cannot include any new information into conclusion, you just need to restate all major points from your previous paragraphs. Such a task is monotonous and irritating because you’re so close to being done with it — you can sense the freedom, if only this stupid paragraph went away. With automatic generator, it does. Our conclusion maker generates a text students need within several seconds. They won’t have to think deeply about which points are the most important or how to put them together, it does this kind of work for them. It relies on their text alone, without taking info from the Internet, meaning that they won’t have to worry about plagiarism. Do tools like this make mistakes? Unfortunately, yes. Machine is machine, and they might mess up badly. But through series of tests and improvements, we made sure to minimize negative outcomes and bring only the best results to you.

Benefits of Using Concluding Generator

When it comes to conclusion paragraph maker, its benefits seem obvious. It’ll craft a closing section for your essay, what else to add here? You’d be surprised! Have a look at these four ways in which conclusion builder could help you.

• Underlining paper’s essence. Students often search for  good research paper topics  and try to explore them in depth, but sometimes, they lose their point. They explore one aspect of a problem after another, jump between different ideas, and before they know it, their paper loses its direction. Concluding paragraph generator will pick only those parts that have the biggest relevance. By looking at a generated last section, you’ll remember what your goal was, and in the end, it will make your writing much stronger.
• Giving ideas for free. Our summarizer is completely free. Students don’t have to pay or even create an account. As they use it, even if they don’t like the first results, they’ll be able to see what points they could include to make their conclusion sound great. It’s a win-win: even flawed outcomes of conclusion tool could be inspiring and educative.
• Saving time. No need to waste an hour on finishing an essay when students could use conclusion creator. It’ll do everything in mere seconds, all they’d have to do afterward is some editing.
• Teaching the rules. By using generator, students see technical aspects of conclusion building. For example, they could take note of the size, which shouldn’t exceed 10% from the word count in total, lack of direct quotes, etc.

There are more ways to summarize your paper. WritingUniverse has many  essay examples free  of charge on our website. Read them and pay attention to conclusion in particular. Students could also hire a human expert who would do this work in a 100% efficient way. It’ll be cheap since this is just one part, but you’ll like results much more.

How Does Essay Conclusion Generator Work?

A lot of students want to understand how generators work before they trust them. We understand this, so we’d like to explain the basics. Our machine follows special algorithms: it searches through your text and selects vital sentences by analyzing number, frequency, and location of key words. It also sticks to the principles we instilled in it regarding the size and some other things. Using our essay conclusion maker is a piece of cake. Students should simply insert their essay into a box and click the button. In a few seconds, they’ll see their paragraph. They could copy it and use it as they want. The only problem is, some professors demand conclusions to be written from scratch. Taking your own sentences and reusing them, even if you mixed them up beforehand, won’t work here. In such cases, we recommend placing an order with a human expert. They could have your conclusion done by your deadline, and like we said, it won’t cost much.

Let Tools and Experts Help You and Enjoy Your Free Time

At WritingUniverse, students could find anything they want. If finishing your essay is bothering you, try our free generator and see how it sounds. If results don’t satisfy you, use services of our human conclusion writer. You could also rephrase all sentences our tool generated for you. There are endless ways of saving your precious hours and completing boring work in minutes: learn about them, pick the one that you like most, and go for it!

Save Time on Research and Writing

Place an order

Make a payment

Approve your order

Receive 100% unique paper

What are the strategies for writing a good conclusion?

Don’t introduce new facts or quotes. Restate your thesis, include major points from each body paragraph, and tie them all together logically. Add recommendations for future research and/or admit limitations of your work if it seems fitting.

How should I summarize an article?

Other than using concluding paragraph maker, avoid adding personal thoughts or analysis. Present information in a cool, objective way even if you disagree with something. Choose the most interesting and relevant bits to summarize for your audience.

How to write a concluding sentence?

This is something that should come instinctively. Re-read your closing paragraph: what is the first line that comes to your mind? If you still cannot think of anything, try conclusion sentence generator — it’ll give you ideas.

What is a conclusion maker?

It is an automatic tool that analyzes a text, picks parts from it, and puts them together in one complete paragraph. The efficiency of such machines can be high, but you should still read what they create to make certain everything’s fine.

What is the best way to end an argumentative essay?

You need to repeat thesis and your position by using a strong voice. List the major pieces of evidence you came up with in the body to support your arguments; remind audience of how you arrived at your conclusion. Try conclusion generator for free and get some ideas.

Every minute counts. Waste it no more and get a unique essay in 3 hours!

• Plagiarism-free
• Any topic starting at $10.99 only

Conclusion Generator Online For All Types Of Papers

Minimum 200 words required

Psst... let's improve your conclusion

• Main ideas summarized
• Plagiarism Free
• No grammar mistakes

How to use conclusions generator:

• Everything you need is to insert your text and it's title into the box
• Click the button and get your conclusion done
• Enjoy the unique final paragraph!
• Would you like to get someone to write your summary and be confident that no points are missing? Ask our experts to write it for you!

(Votes: 0 )

Conclusion Generator Review

Unlike other conclusion generator services, the Papersowl conclusion tool offers a user-friendly interface for plagiarism-free conclusions and anonymity.

How to avoid plagiarism?

Proper citation style.

Avoid plagiarism by always listing the source and formatting it correctly when you are note-taking. Take care of the proper formatting and citation style when using content from outside sources.

Write on your own

Avoid borrowing and overusing large pieces of the content from outside sources, especially from Wikipedia. Write your own thoughts and use sources only to support your opinion (remember to cite it though!).

Rewriting Service

PapersOwl expert can rewrite up to 75% of your content, edit and proofread your paper to make it plagiarism free and ready to use.

Editing Service

PapersOwl expert can edit up to 50% of your content, proofread and polish your paper to make it plagiarism free and ready to use.

Writing Service

PapersOwl expert can rewrite your paper from scratch according to instructions and guidelines and make it plagiarism free and ready to use.

Suits your similarity index. Consider using it!

Our Experts Team

Completed orders: 1002

Ghettos and Gated Communities

• Paper Type: Essay (Any Type)
• Subject: English

Completed orders: 877

Outsourcing and globalization

• Subject: Business and Entrepreneurship

Completed orders: 884

Should the government raise the federal minimum wage?

• Subject: Law

Completed orders: 492

Social Trends Analysis

• Subject: Sociology

Completed orders: 930

Understanding Plagiarism and its Dangers in Academics

Completed orders: 1110

Obesity in America

Completed orders: 793

Social media impact

Conclusion Generator Online

Do you always find it difficult how to finish your paper and make all conclusions right? There is one beautiful thing like an online conclusion generator that would help you to put through your written and beautiful work neatly and nicely. The whole team of specialists took into account all the shortcomings. Many people from all over the world have already tried him and were pleased because regardless of the complexity of the text and its type, the conclusion generator will be useful to you.

Why It's Necessary To Use Conclusion Generator Tool?

It is very important to conclude because those words would be for a long time ahead of the reader and you should try it because you may not able to take into account all trivia and summarize them. If you think you are a master of inference at least just make an attempt to compare your one with computers and that it would be clear very soon.  But machines are evolving so rapidly that they really do more efficiently than people. When doing your homework take advantage of the conclusion generator for essay or research paper to be the best pupil in your class.

There are some websites where this service is paid and does not justify expectations. However, we provide users with absolutely free service because we care about our customers and want them to develop professional writing skills. And if you are used to writing your summarization by professional you may try as well order conclusion paragraph for an essay .

How Does Conclusion Generator Summarize Your Paper?

You might be thinking of what a mystic or I don't believe that is true but there is nothing difficult. Thanks to the easy calculations, the system auto defines an ideal variant for the outcome of the whole text. Here is how the conclusion maker works:

• Copy all important information from your paragraphs to make an inference
• Paste it into an appropriate place
• Press on summarize and wait a little for the best final part.
• And already very quickly you will get what you have been waiting for and you are pleased. Well, then you just need to copy this conclusion where you need it and that's all - the work is done.  

If You Pay For Research Paper You Get Many Advantages

Check these points to make your conclusion paragraph perfect.

Your summary won't be successful until your paragraphs and phrases are in good condition. Each of the paragraphs should reveal the research of the task, in order for the conclusion paragraph generator to weigh everything for and against for a wonderful illation.  But in no case should any of the paragraphs be in contradiction with the general idea that you reveal. I think that following all of the above rules, your inference deserves high recognition.

Also, do not deviate from the main idea of the text, because that makes your paper uninteresting to read and it looks as if you just filled a blank space. Keep in mind that you should avoid plagiarism or strictly adhere to the established level. This is no longer important for the free conclusion generator, but it is imperative for the job to be accepted. If you want to check the percentage of plagiarism, you can try plagiarism checker for your essay .

Best Professional Writers To Help You Finish Your Papers!

If you do not trust such artificial intelligence as the free essay conclusion generator, seek help from specialists. Our writers are highly qualified in the field of writing. They are ready to do any part of your work, as well as summarize the text. The main advantage and pride of our site are that we provide the opportunity for users to choose their own writer. Moreover, you are able to see his profile, the number of as well as comments on his work and rating. Here you can apply for help at any time of the day, and even if you have an urgent task, it can quickly be fulfilled by arrangement.

That's not all. We also provide users with the opportunity to communicate online with writers free of payment for greater convenience and benefit. Explaining the task the paper will be performed, even if the topic is extremely difficult and you have already been rejected from other websites. If you do not satisfied with some points, then this work either is done once again or given back. If you need our workers also can write your essay .  

To finish your paper, you may always use the conclusion generator, which would be a great thing in your hard work writing. This is a unique opportunity to have an online assistant at your fingertips anytime. Also, with any difficulty, you may apply for help to our site – we are appreciated by many of our regular users and you can easily join them. You just have to decide, and we are always open to our customers.

PapersOwl is a well-known provider of all types of academic papers.

• Research paper
• Dissertation

and many more

• Stuck with a lot of homework assignments?
• Worried about making your work 100% plagiarism free?
• Looking for a writing help with affordable price?

How Does Conclusion Generator Work??

• Enter a title and a minimum of 200 words from your paper in the appropriate boxes.
• Click on generate button to get unique conclusion.
• You can paraphrase it, or copy the result into your paper.
• Optionally, you can improve your conclusion by ordering custom help from our writing experts.
• Reliable Editors
• Any Field of Study
• Fair Prices

Free Conclusion Generator is rated 4.9 /5 based on 701 user reviews.

Want your voice to count in? Send us your review with all the details.

Advantages of Conclusion Generator By PapersOwl

Having trouble writing a powerful conclusion for your papers? Use our generator, which offers many advantages.

While competitors charge money for such services, we offer our Conclusion Generator free!

We guarantee the original papers, written by our authors exclusively for you.

We care about the quality of our programs, so our algorithms can always generate qualitative results

You don't have to wait long for the result. After you have entered the piece of your paper, the system will generate an output within a few seconds.

Many students have already confirmed that our free tool is a great and convenient feature that helped them detect and fix errors that could lead to a failure. With us, you will no longer need to look for a different scanner!

Free Tools for Writing

Why wait place an order right now.

Just fill out the form, press the button, and have no worries!

Scientific Method: Step 6: CONCLUSION

• Step 1: QUESTION
• Step 2: RESEARCH
• Step 3: HYPOTHESIS
• Step 4: EXPERIMENT
• Step 5: DATA
• Step 6: CONCLUSION

Step 6: Conclusion

Finally, you've reached your conclusion. Now it is time to summarize and explain what happened in your experiment. Your conclusion should answer the question posed in step one. Your conclusion should be based solely on your results.

Think about the following questions:

• Was your hypothesis correct?
• If your hypothesis wasn't correct, what can you conclude from that?
• Do you need to run your experiment again changing a variable?
• Is your data clearly defined so everyone can understand the results and follow your reasoning?

Remember, even a failed experiment can yield a valuable lesson.  

Draw your conclusion

• Conclusion Sections in Scientific Research Reports (The Writing Center at George Mason)
• Sample Conclusions (Science Buddies)
• << Previous: Step 5: DATA
• Next: Resources >>
• Last Updated: May 9, 2024 10:59 AM
• URL: https://harford.libguides.com/scientific_method

• International
• Schools directory
• Resources Jobs Schools directory News Search

How to write a Scientific Conclusion

Subject: Physics

Age range: 11-14

Resource type: Other

Last updated

3 June 2015

• Share through email
• Share through twitter
• Share through linkedin
• Share through facebook
• Share through pinterest

Creative Commons "Sharealike"

Your rating is required to reflect your happiness.

It's good to leave some feedback.

Something went wrong, please try again later.

CarmelObrien

A great resource for our scientific experiment!

Empty reply does not make any sense for the end user

Anon54552548707131224

Thank you. brilliant resource . Thank you for sharing .

Had to work on it to fit my class. Thank you.

iulai_blakelock

Really good resource! Thank you

Report this resource to let us know if it violates our terms and conditions. Our customer service team will review your report and will be in touch.

Not quite what you were looking for? Search by keyword to find the right resource:

• Guidelines to Write Experiences
• Write Interview Experience
• Write Work Experience
• Write Admission Experience
• Write Campus Experience
• Write Engineering Experience
• Write Coaching Experience
• Write Professional Degree Experience
• Write Govt. Exam Experiences
• Work Experience as Technical Content Writing Intern at FavTutor
• Internshala clubs Interview Experience For Content Writing
• Thinklayer Minds Work Experience as Content Writer
• How to write a Work Experience?
• GeeksforGeeks Work Experience as Technical Content Writer Intern
• GeeksforGeek Working Experience as Content Writer
• Madadgaar Foundation Work Experience as Content Writer Intern
• Quokka Labs Work Expereince as a Technical Content Writer
• FavTutor Interview Experience for Technical Content Writer
• BeeTechnical Work Experience as Technical Content Writer
• TechGeeks Inc Interview Experience for Technical Content Writer
• Geeksforgeeks Write It Up Event Experience
• Collegedunia Interview Experience for Technical Content Writer
• How to write an Admission Experience?
• How Content Writing at GeeksforGeeks works?
• How to Write Coding Contest Experiences on GeeksForGeeks
• Top 10 Free AI Writing Tools for Content Creators
• Job Description (JD) for Content Writer

SportsUnfold Work Experience For Content Writing

Joining SportsUnfold was not just a job opportunity; it was an immersion into the dynamic world of sports writing. Over nearly a year, I embarked on a journey that not only honed my skills as a writer but also enriched my knowledge of various sports and their players.

Diving into the World of Sports Writing

At SportsUnfold, every day was a new adventure. From the electrifying atmosphere of live matches to the intricate details of player statistics, I delved deep into the heart of sports journalism. Writing became more than just putting words on paper; it became a way to capture the essence of sporting events and share it with the world.

Exploring Creativity in Sports Articles

One of the most fulfilling aspects of my job was the opportunity to unleash my creativity through writing. Whether it was crafting engaging match summaries, profiling rising stars, or delving into the history of iconic sporting moments, I discovered new ways to bring the magic of sports to life through words.

Broadening Horizons: Knowledge of Various Sports

Before joining SportsUnfold, my knowledge of sports was limited to a few popular ones. However, my time at the website opened my eyes to the vast array of sports that exist around the world. From mainstream favorites like football and basketball to niche sports like cricket and curling, I gained a newfound appreciation for the diversity of athletic pursuits.

Getting to Know the Players Behind the Game

Beyond the thrill of the game itself, SportsUnfold provided me with the opportunity to delve into the lives and careers of sports personalities. Through interviews, research, and analysis, I gained insight into the stories behind the athletes – their struggles, triumphs, and the sheer dedication that propels them to greatness.

My experience at SportsUnfold has been nothing short of transformative. From honing my writing skills to expanding my knowledge of sports, it has been a journey filled with excitement, learning, and growth. As I move forward, I carry with me the lessons and memories from this experience, grateful for the opportunity to be a part of the vibrant world of sports journalism.

Please Login to comment...

Similar reads.

• Company Culture
• SportsUnfold
• Write It Up 2024
• Experiences
• Work Experiences

Improve your Coding Skills with Practice

What kind of Experience do you want to share?